Detail publikace

Creation of Nanostructured Surface by Template-Based Electrodeposition Method

Originální název

Creation of Nanostructured Surface by Template-Based Electrodeposition Method

Anglický název

Creation of Nanostructured Surface by Template-Based Electrodeposition Method

Jazyk

en

Originální abstrakt

Nanostructures have attracted increasing attention because of their potential use in a wide range of technological applications, and also because of their novel properties. There are many ways to fabricate nanostructures, but only template-based methods have several advantages such as fabrication of large quantities of nanostructures on a small area, good control over their dimensions, the use of a broad range of materials, from which the nanostructures can be created, etc. These methods also enable to create both nanowires and nanotubes. The template-based methods are based on fabrication of a non-conductive template which contains pores smaller than 100 nm in diameter. If the template is attached to a conductive substrate a metal can be electrodeposited into the pores and after removing the template, nanowires or nanotubes of the same diameters as the pores in the template are obtained.

Anglický abstrakt

Nanostructures have attracted increasing attention because of their potential use in a wide range of technological applications, and also because of their novel properties. There are many ways to fabricate nanostructures, but only template-based methods have several advantages such as fabrication of large quantities of nanostructures on a small area, good control over their dimensions, the use of a broad range of materials, from which the nanostructures can be created, etc. These methods also enable to create both nanowires and nanotubes. The template-based methods are based on fabrication of a non-conductive template which contains pores smaller than 100 nm in diameter. If the template is attached to a conductive substrate a metal can be electrodeposited into the pores and after removing the template, nanowires or nanotubes of the same diameters as the pores in the template are obtained.

BibTex


@inproceedings{BUT23224,
  author="Kateřina {Klosová} and Jaromír {Hubálek}",
  title="Creation of Nanostructured Surface by Template-Based Electrodeposition Method",
  annote="Nanostructures have attracted increasing attention because of their potential use in a wide range of technological applications, and also because of their novel properties. There are many ways to fabricate nanostructures, but only template-based methods have several advantages such as fabrication of large quantities of nanostructures on a small area, good control over their dimensions, the use of a broad range of materials, from which the nanostructures can be created, etc. These methods also enable to create both nanowires and nanotubes. The template-based methods are based on fabrication of a non-conductive template which contains pores smaller than 100 nm in diameter. If the template is attached to a conductive substrate a metal can be electrodeposited into the pores and after removing the template, nanowires or nanotubes of the same diameters as the pores in the template are obtained.",
  address="Ing. Zdeňek Novotný CSc.",
  booktitle="EDS '07 IMAPS CS INTERNATIONAL CONFERENCE PROCEEDINGS",
  chapter="23224",
  institution="Ing. Zdeňek Novotný CSc.",
  year="2007",
  month="september",
  pages="232--237",
  publisher="Ing. Zdeňek Novotný CSc.",
  type="conference paper"
}