Detail publikace

Transport and Noise Characteristics of CdTe Sensors

GRMELA, L., ŠIKULA, J., ZAJAČEK, J., DOBIS, P., MORAVEC, P.

Originální název

Transport and Noise Characteristics of CdTe Sensors

Český název

Transport and Noise Characteristics of CdTe Sensors

Anglický název

Transportní a šumové charakteristiky senzorů na bázi CdTe

Typ

článek ve sborníku

Jazyk

cs

Originální abstrakt

Experimental studies of transport and noise characteristics of CdTe sensors have been carried out. There are three different 1/f noise sources; bulk and surface 1/f which is proportional to square of current and contact 1/f noise with current noise spectral density proportional to higher than second power of current. Experimental results are used to characterize contact technology preparation. Contact prepare by deposition of gold from aqueous solution of AuCl3. Low and high ohmic samples reveal contact resistance. This one is dominant noise sources for low ohmic samples, while high ohmic samples are sources 1/f with dominant mobility fluctuation. Hooge constant alpha = 1.5x10-3 is very near to theoretical. Noise spectral density of sample with dominant contact noise is proportion to In with n>2. High resistance samples reveal in frequency range f > 100 Hz shot noise with spectral density corresponding to theoretical one. Noise equivalent power (NEP) and sensitivity characteristics were evaluated.

Český abstrakt

Experimental studies of transport and noise characteristics of CdTe sensors have been carried out. There are three different 1/f noise sources; bulk and surface 1/f which is proportional to square of current and contact 1/f noise with current noise spectral density proportional to higher than second power of current. Experimental results are used to characterize contact technology preparation. Contact prepare by deposition of gold from aqueous solution of AuCl3. Low and high ohmic samples reveal contact resistance. This one is dominant noise sources for low ohmic samples, while high ohmic samples are sources 1/f with dominant mobility fluctuation. Hooge constant alpha = 1.5x10-3 is very near to theoretical. Noise spectral density of sample with dominant contact noise is proportion to In with n>2. High resistance samples reveal in frequency range f > 100 Hz shot noise with spectral density corresponding to theoretical one. Noise equivalent power (NEP) and sensitivity characteristics were evaluated.

Anglický abstrakt

Experimental studies of transport and noise characteristics of CdTe sensors have been carried out. There are three different 1/f noise sources; bulk and surface 1/f which is proportional to square of current and contact 1/f noise with current noise spectral density proportional to higher than second power of current. Experimental results are used to characterize contact technology preparation. Contact prepare by deposition of gold from aqueous solution of AuCl3. Low and high ohmic samples reveal contact resistance. This one is dominant noise sources for low ohmic samples, while high ohmic samples are sources 1/f with dominant mobility fluctuation. Hooge constant alpha = 1.5x10-3 is very near to theoretical. Noise spectral density of sample with dominant contact noise is proportion to In with n>2. High resistance samples reveal in frequency range f > 100 Hz shot noise with spectral density corresponding to theoretical one. Noise equivalent power (NEP) and sensitivity characteristics were evaluated.

Rok RIV

2005

Vydáno

15.09.2005

Nakladatel

Ing. Zdeněk Novotný, CSc., Brno, Ondráčkova 105

Místo

Brno

ISBN

80-214-2990-9

Kniha

Electronic Devices and Systems

Strany od

288

Strany do

293

Strany počet

6

BibTex


@inproceedings{BUT20901,
  author="Lubomír {Grmela} and Josef {Šikula} and Jiří {Zajaček} and Pavel {Dobis} and Pavel {Moravec}",
  title="Transport and Noise Characteristics of CdTe Sensors",
  annote="Experimental studies of transport and noise characteristics of CdTe sensors have been carried out. There are three different 1/f noise sources; bulk and surface 1/f which is proportional to square of current and contact 1/f noise with current noise spectral density proportional to higher than second power of current. Experimental results are used to characterize contact technology preparation. Contact prepare by deposition of gold from aqueous solution of AuCl3. Low and high ohmic samples reveal contact resistance. This one is dominant noise sources for low ohmic samples, while high ohmic samples are sources 1/f with dominant mobility fluctuation. Hooge constant alpha = 1.5x10-3 is very near to theoretical. Noise spectral density of sample with dominant contact noise is proportion to In with n>2. High resistance samples reveal in frequency range f > 100 Hz shot noise with spectral density corresponding to theoretical one. Noise equivalent power (NEP) and sensitivity characteristics were evaluated.",
  address="Ing. Zdeněk Novotný, CSc., Brno, Ondráčkova 105",
  booktitle="Electronic Devices and Systems",
  chapter="20901",
  institution="Ing. Zdeněk Novotný, CSc., Brno, Ondráčkova 105",
  year="2005",
  month="september",
  pages="288",
  publisher="Ing. Zdeněk Novotný, CSc., Brno, Ondráčkova 105",
  type="conference paper"
}