Detail publikace

Advanced knee implants for the third millenium

PÍŠKA, M. BUČKOVÁ, K.

Originální název

Advanced knee implants for the third millenium

Typ

článek v časopise - ostatní, Jost

Jazyk

angličtina

Originální abstrakt

This work deals with a frequent today's problem of human joint replacements by applying of advanced radiology techniques (CT, MR, X-ray), application of powder materials and the modern additive (melting of metal powders by electron beam - EBM) and machining technologies. The main attention is devoted to the EBM used by the ARCAM Q10plus machine. A special attention is then paid to the data processing, optimization of design, technological parameters, quality of the produced materials and their post-processing, expressed by 3D topographies of the machined surfaces, machinability, mechanical and tribological properties. The studied technologies inlude turning, milling, belt grinding and tumbling, in dry conditions. In general, the material exhibits a high resistance to the machining, expressed in terms of specific cutting energies (KISTLER 9575B, Dynoware). Analyses of the samples were made to quantify the production precision and quality (electron microscopy Tescan MIRA 3GM, electron dual microscopy TermoFischer, Alicona IF G6, Mahrvision MM 420) after sintering in different technological modes. The final surface quality results in glossy surfaces (Ra< 0.04 um) with high material ratios that enhance the resistance to fatigue crack propagations. The results are very encouraging because this advanced technology (starting at the basic surgical inspections up to the operation with advanced taylor-made implant) can offer an optimized implant that prevails in superior mechanical properties, light mass and excellent mechanical properties. Moreover, a bigger ratio of the original bone can be preserved so a longer life of the implants and reduction of re-operations and after-effects can be expected.

Klíčová slova

knee. implant; EBM; titan;CT

Autoři

PÍŠKA, M.; BUČKOVÁ, K.

Vydáno

25. 3. 2019

Nakladatel

Conference Series IIc LTD - UK

Místo

London

ISSN

2169-0022

Periodikum

Journal of Material Sciences & Enginering

Ročník

8

Číslo

March 2019

Stát

Spojené království Velké Británie a Severního Irska

Strany od

20

Strany do

21

Strany počet

2

URL

BibTex

@article{BUT156420,
  author="Miroslav {Píška} and Katrin {Bučková}",
  title="Advanced knee implants for the third millenium",
  journal="Journal of Material Sciences & Enginering",
  year="2019",
  volume="8",
  number="March 2019",
  pages="20--21",
  doi="10.4172/2169-0022-c2-127",
  issn="2169-0022",
  url="https://3dprinting.insightconferences.com/scientific-program"
}