Detail publikace

Preparation and Characterization of Zinc Materials Prepared by Powder Metallurgy

KRYSTÝNOVÁ, M. DOLEŽAL, P. FINTOVÁ, S. BŘEZINA, M. ZAPLETAL, J. WASSERBAUER, J.

Originální název

Preparation and Characterization of Zinc Materials Prepared by Powder Metallurgy

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

The use of zinc-based materials as biodegradable materials for medical purposes is offered as a possible alternative to corrosion-less resistant magnesium-based materials. Zinc powders with two different particle sizes (7.5 µm and 150 µm) were processed by the methods of powder metallurgy: cold pressing, cold pressing followed by sintering and hot pressing. The microstructure of prepared materials was evaluated in terms of light optical microscopy, and the mechanical properties were analyzed with Vickers microhardness testing and three-point bend testing. Fractographic analysis of broken samples was performed with scanning electron microscopy. Particle size was shown to have a significant effect on compacts mechanical properties. The deformability of 7.5 µm particle size powder was improved by increased temperature during the processing, while in the case of larger powder, no significant influence of temperature was observed. Bending properties of prepared materials were positively influenced by elevated temperature during processing and correspond to the increasing compacting pressures. Better properties were achieved for pure zinc prepared from 150-µm particle size powder compared to materials prepared from 7.5 µm particle size powder.

Klíčová slova

powder metallurgy; zinc; cold pressing; sintering; hot pressing; mechanical properties

Autoři

KRYSTÝNOVÁ, M.; DOLEŽAL, P.; FINTOVÁ, S.; BŘEZINA, M.; ZAPLETAL, J.; WASSERBAUER, J.

Vydáno

27. 9. 2017

Nakladatel

MDPI

ISSN

2075-4701

Periodikum

Metals

Ročník

7

Číslo

396

Stát

Švýcarská konfederace

Strany od

1

Strany do

15

Strany počet

15

URL

https://www.mdpi.com/2075-4701/7/10/396

Plný text v Digitální knihovně

http://hdl.handle.net/11012/70105

BibTex

@article{BUT140482,
  author="Michaela {Hasoňová} and Pavel {Doležal} and Stanislava {Fintová} and Matěj {Březina} and Josef {Zapletal} and Jaromír {Wasserbauer}",
  title="Preparation and Characterization of Zinc Materials Prepared by Powder Metallurgy",
  journal="Metals",
  year="2017",
  volume="7",
  number="396",
  pages="1--15",
  doi="10.3390/met7100396",
  issn="2075-4701",
  url="https://www.mdpi.com/2075-4701/7/10/396"
}