Detail publikace

Flux effect on void quantity and size in soldered joints

D. Bušek, K. Dušek, D. Růžička, M. Plaček, P. Mach, J. Urbánek, J. Starý

Originální název

Flux effect on void quantity and size in soldered joints

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Article is focused on both macro and microvoids in soldered joints and the use of additional flux to reduce their frequency and minimize their negative effect on the soldered joint reliability. In total five fluxes were used, three were gel based (NC559, MTV-125R, TSF-6516) and two of them were liquid based (Topnik G-5, JBC FL-15). They were used within two solder pastes, both lead and lead-free. The reflow process was identical for all of the combinations and was within the range of manufacturer recommended profiles. The amount of voids was evaluated using X-ray analysis. It was found that the use of increased amount of proper flux, specifically flux with higher activity, in the solder paste may significantly lower the void occurrence.

Klíčová slova

Assembly manufacturing, reliability, soldering, voids, flux

Autoři

D. Bušek, K. Dušek, D. Růžička, M. Plaček, P. Mach, J. Urbánek, J. Starý

Vydáno

1. 5. 2016

Místo

Nizozemsko

ISSN

0026-2714

Periodikum

Microelectronics Reliability

Číslo

60

Stát

Spojené království Velké Británie a Severního Irska

Strany od

135

Strany do

140

Strany počet

6

BibTex

@article{BUT131617,
  author="David {Bušek} and Karel {Dušek} and Daniel {Růžička} and Martin {Plaček} and Pavel {Mach} and Jan {Urbánek} and Jiří {Starý}",
  title="Flux effect on void quantity and size in soldered joints 

",
  journal="Microelectronics Reliability",
  year="2016",
  number="60",
  pages="135--140",
  doi="10.1016/j.microrel.2016.03.009",
  issn="0026-2714"
}