Detail publikace

Spray characteristics and liquid distribution of multi-hole effervescent atomisers for industrial burners

JEDELSKÝ, J. JÍCHA, M.

Originální název

Spray characteristics and liquid distribution of multi-hole effervescent atomisers for industrial burners

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

The present paper provides an experimental study and optimization of multi-hole effervescent atomizers for industrial burners using oil-based fossil, bio- or waste fuels with prospects of emission reduction. Several multi-hole nozzles were designed based on our previous work. We probed the spray quality by Phase-Doppler anemometry. 3-D plots of Sauter mean diameter and mean droplet velocity demonstrate their spatial distribution within the spray. The effect of geometrical and operational factors on the spray is discussed. Droplet size–velocity correlations as well as the size and velocity distributions are presented, and differences are found against other investigations. A spray macrostructure is photographically observed and spray cone angles of the multi-hole nozzles are analysed. An internal two-phase flow is estimated using the Baker’s map for horizontal two-phase flow. Our previous two-phase flow visualizations suggested a liquid–gas gravitational separation when the multi-hole atomizer operated horizontally. This issue is addressed here; the results of spray heterogeneity measurements document that fuel flow rates through individual exit holes differ significantly. This difference spans between 0 and 70% depending on the nozzle design and flow regime. Effervescent sprays are unsteady under some operating conditions; spray unsteadiness was detected at low pressure and low gas-to-liquid-ratios.

Klíčová slova

Droplet size; Effervescent atomization; Liquid–gas separation; Multi-hole atomizers; Spray unsteadiness; Two-phase flow

Autoři

JEDELSKÝ, J.; JÍCHA, M.

Vydáno

5. 3. 2016

Nakladatel

Elsevier

ISSN

1359-4311

Periodikum

Applied Thermal Engineering

Ročník

96

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany od

286

Strany do

296

Strany počet

11

URL

Plný text v Digitální knihovně

BibTex

@article{BUT120495,
  author="Jan {Jedelský} and Miroslav {Jícha}",
  title="Spray characteristics and liquid distribution of multi-hole effervescent atomisers for industrial burners",
  journal="Applied Thermal Engineering",
  year="2016",
  volume="96",
  number="1",
  pages="286--296",
  doi="10.1016/j.applthermaleng.2015.11.079",
  issn="1359-4311",
  url="http://www.sciencedirect.com/science/article/pii/S1359431115013253"
}