Detail publikace

Application of a reflectance model to the sensor planning system

KOUTECKÝ, T. PALOUŠEK, D. BRANDEJS, J.

Originální název

Application of a reflectance model to the sensor planning system

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

This study describes a new sensor planning system for the automatic generation of scanning positions based on a computer model of the part for digitization of sheet metal parts. The focus of this paper is in the application of a reflectance model into this sensor planning system. Optical 3D scanners and industrial robots are used more often for inspection of sheet metal parts in serial-line production. Measuring positions for accurate and fast digitization of a part need to be prepared as the manufacturing of the new part begins. Planning of such positions is usually done manually by positioning of the industrial robot and saving the positions. The planning of positions proposed by this system is done automatically. A methodology of sensor planning consists of positions planning, their simulation for true visibility of the part elements using a reflectance model, and a simulation of the positions for robot reachability. The entire methodology is implemented as a plug-in for the Rhinoceros software. This study is focused on digitization of sheet metal parts that are characterized by specular surfaces. The system is designed for and tested with a stereo camera fringe projection 3D scanner, ATOS Triple Scan (GOM GmbH). Compared to previous studies in the field of automated sensor planning, this study adds in the simulation phase the use of a reflectance model. The Nayar model is used as a reflectance model. This model uses three components of reflection: diffuse, specular lobe and specular spike. This paper describes the experimental determination of the Nayar model parameters and also determination of limit gray values (from scanner camera images) for correct decoding of fringes and thus correct scanning of a sheet metal (steel) part. For each sensor position an exposure time for scanning is determined based on simulation. Results of the scanning that were obtained using an ATOS Triple Scan 3D scanner and a KUKA KR 60 HA industrial robot were compared to the simulation. The comparison based on the correspondence of the polygons area acquired in each sensor position (in simulation and in scanning) shows that in the performed measurements the median of differences between simulation and scanning is around 16%.

Klíčová slova

sensor planning, 3D scanning, automation, reflectance model, sheet metal parts, automotive industry, fringe projection, industrial robot

Autoři

KOUTECKÝ, T.; PALOUŠEK, D.; BRANDEJS, J.

Rok RIV

2015

Vydáno

24. 6. 2015

Nakladatel

SPIE

Místo

Munich, Germany

ISBN

9781628416909

Kniha

PROCEEDINGS OF SPIE - Automated Visual Inspection and Machine Vision

ISSN

0277-786X

Periodikum

Proceedings of SPIE

Ročník

9530

Stát

Spojené státy americké

Strany od

953005-1

Strany do

953005-13

Strany počet

13

URL