Detail publikace

Influence of the impact angle and pressure on the spray cooling of vertically moving hot steel surfaces

HNÍZDIL, M. CHABIČOVSKÝ, M. RAUDENSKÝ, M.

Originální název

Influence of the impact angle and pressure on the spray cooling of vertically moving hot steel surfaces

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

The cooling of vertically moving strips is used very often to obtain the required material properties. Water spray cooling has to be used when a high cooling intensity is needed. Our Heat Transfer and Fluid Flow Laboratory is equipped with a testing device which allows vertical movement of a heated experimental plate (sheet). Two different sizes of flat-jet nozzles were tested with different water pressures and angles of the water impact (inclination angles of the spraying bar). The water-pressure range was between 2 bar and 9.3 bar and the angle of the water impact changed from 20 deg to 40 deg. The dependence of the heat-transfer coefficient on the surface temperature was evaluated for each experiment. Interesting results were obtained from the comparison of these experimental results, showing that the heat-transfer coefficient and the Leidenfrost temperature increase with the increasing water pressure. Very interesting results were obtained during the tests with different inclination angles. The highest heat-transfer coefficient was obtained for the angle of 20 deg and the lowest value of the heat-transfer coefficient was obtained for the angle of 40 deg at the surface temperatures of around 200 degrese of Celsius.

Klíčová slova

spray cooling, flat jet nozzles, impact angle, water impingement density, Leidenfrost temperature

Autoři

HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M.

Rok RIV

2015

Vydáno

1. 5. 2015

Nakladatel

Insitute of Metals and Technology, Ljubljana, Slovenia

Místo

LJUBLJANA SLOVENIJA

ISSN

1580-2949

Periodikum

Materiali in tehnologije

Ročník

49

Číslo

3

Stát

Slovinská republika

Strany od

333

Strany do

336

Strany počet

4

URL

BibTex

@article{BUT114425,
  author="Milan {Hnízdil} and Martin {Chabičovský} and Miroslav {Raudenský}",
  title="Influence of the impact angle and pressure on the spray cooling of vertically moving hot steel surfaces",
  journal="Materiali in tehnologije",
  year="2015",
  volume="49",
  number="3",
  pages="333--336",
  doi="10.17222/mit.2013.239",
  issn="1580-2949",
  url="http://mit.imt.si/Revija/"
}