Detail publikace

Optimization of the Tilted Fibre Bragg Gratings for the Fibre Accelerometric Sensor

URBAN, F. URBAN, F.

Originální název

Optimization of the Tilted Fibre Bragg Gratings for the Fibre Accelerometric Sensor

Český název

Optimization of the Tilted Fibre Bragg Gratings for the Fibre Accelerometric Sensor

Anglický název

Optimization of the Tilted Fibre Bragg Gratings for the Fibre Accelerometric Sensor

Typ

článek v časopise

Jazyk

en

Originální abstrakt

The presentation shows the principle and construction of the fibre optic accelerometric sensor. The sensor element is based on the use of the tilted fibre Bragg grating (TFBG) that is imprinted to the bend insensitive single-mode telecommunication grade fibre. The fibre section with TFBG is then coupled to the evaluation fibre circuit with the cladding-core mode conversion element that provides the core re-coupling of the optical power injected by TFBG to the fibre cladding. The cladding-core mode conversion efficiency is sensitive to the acceleration generated fibre bending. It is shown that the sensitivity of the device depends on the rate of the main core reflection versus cladding ghost reflection induced by the grating. The analysis of the core reflection power coupling on the angle of the grating tilt and the analysis of the cladding ghost reflection power coupling on the angle of the grating tilt is presented and the optimal parameters of the tilt and refractive index modulation are derived. The presentation gives the experimental results of the TFBG sensor prepared according to the optimization process.

Český abstrakt

The presentation shows the principle and construction of the fibre optic accelerometric sensor. The sensor element is based on the use of the tilted fibre Bragg grating (TFBG) that is imprinted to the bend insensitive single-mode telecommunication grade fibre. The fibre section with TFBG is then coupled to the evaluation fibre circuit with the cladding-core mode conversion element that provides the core re-coupling of the optical power injected by TFBG to the fibre cladding. The cladding-core mode conversion efficiency is sensitive to the acceleration generated fibre bending. It is shown that the sensitivity of the device depends on the rate of the main core reflection versus cladding ghost reflection induced by the grating. The analysis of the core reflection power coupling on the angle of the grating tilt and the analysis of the cladding ghost reflection power coupling on the angle of the grating tilt is presented and the optimal parameters of the tilt and refractive index modulation are derived. The presentation gives the experimental results of the TFBG sensor prepared according to the optimization process.

Anglický abstrakt

The presentation shows the principle and construction of the fibre optic accelerometric sensor. The sensor element is based on the use of the tilted fibre Bragg grating (TFBG) that is imprinted to the bend insensitive single-mode telecommunication grade fibre. The fibre section with TFBG is then coupled to the evaluation fibre circuit with the cladding-core mode conversion element that provides the core re-coupling of the optical power injected by TFBG to the fibre cladding. The cladding-core mode conversion efficiency is sensitive to the acceleration generated fibre bending. It is shown that the sensitivity of the device depends on the rate of the main core reflection versus cladding ghost reflection induced by the grating. The analysis of the core reflection power coupling on the angle of the grating tilt and the analysis of the cladding ghost reflection power coupling on the angle of the grating tilt is presented and the optimal parameters of the tilt and refractive index modulation are derived. The presentation gives the experimental results of the TFBG sensor prepared according to the optimization process.

Klíčová slova

Optical Fibre, Tilted Fibre Bragg Grating, Accelerometric Sensor, Cladding Modes, Reflected Spectrum

Rok RIV

2014

Vydáno

21.05.2014

Nakladatel

Scientific Research Publishing Inc.

Místo

China

ISBN

2327-5219

Kniha

Journal of Computer and Communications

Číslo edice

2

Strany od

36

Strany do

41

Strany počet

6

BibTex


@article{BUT110289,
  author="František {Urban} and František {Urban}",
  title="Optimization of the Tilted Fibre Bragg Gratings for the Fibre Accelerometric Sensor",
  annote="The presentation shows the principle and construction of the fibre optic accelerometric sensor. The sensor element is based on the use of the tilted fibre Bragg grating (TFBG) that is imprinted to the bend insensitive single-mode telecommunication grade fibre. The fibre section with TFBG is then coupled to the evaluation fibre circuit with the cladding-core mode conversion element that provides the core re-coupling of the optical power injected by TFBG to the fibre cladding. The cladding-core mode conversion efficiency is sensitive to the acceleration generated fibre bending. It is shown that the sensitivity of the device depends on the rate of the main core reflection versus cladding ghost reflection induced by the grating. The analysis of the core reflection power coupling on the angle of the grating tilt and the analysis of the cladding ghost reflection power coupling on the angle of the grating tilt is presented and the optimal parameters of the tilt and refractive index modulation are derived. The presentation gives the experimental results of the TFBG sensor prepared according to the optimization process.",
  address="Scientific Research Publishing Inc.",
  booktitle="Journal of Computer and Communications",
  chapter="110289",
  doi="10.4236/jcc.2014.27006",
  howpublished="online",
  institution="Scientific Research Publishing Inc.",
  number="7",
  volume="2",
  year="2014",
  month="may",
  pages="36--41",
  publisher="Scientific Research Publishing Inc.",
  type="journal article"
}