Detail publikace

Study of the Passive Layer and Corrosion Resistance of Stainless Steels

CHÁRA, T. TKACZ, J. ZMRZLÝ, M.

Originální název

Study of the Passive Layer and Corrosion Resistance of Stainless Steels

Typ

přednáška

Jazyk

angličtina

Originální abstrakt

The objective of this study is to compare the composition of the passive layer (made by natural or chemical passivation) on stainless steel AISI 304L. X-ray photoelectron spectroscopy (XPS) with ion etching was used. First, scanning electron microscope (SEM) with energy dispersive analyser(EDS) was used to verify the chemical composition of stainless steel and metallographic structure characterization was done. With DLD Ultra AXIS X-ray photoelectron spectrometerelemental composition of the passive layerwas determined as a function of sputtering time. The quality of the two observed passive layers was evaluated on the basis of recorded contents of chromium in oxidized and in metal form. The measurementswere conducted in 3 locations (1 - area of weld, 2 - heat-affected zone, 3 - the area of the base material). Furthermore, tests according to standard CSN EN ISO 9227 were performed in neutral salt spray for up to 1000 hours. According to standard CSN 03 8171 stainless steel samples were exposed in a solution of ferric chloride, using FeCl3.6H2O (concentration of FeCl3 = 6 %). The XPS measurement showed that better passive layer was formed on stainless steel after chemical passivation.Measurements using ion etching can be divided into three stages, where the most interesting is the second stage in which there was a linear removal of the passive layer.

Klíčová slova

Passive layer, stainless steels, XPS.

Autoři

CHÁRA, T.; TKACZ, J.; ZMRZLÝ, M.

Vydáno

22. 7. 2014

Nakladatel

DGM

Místo

Lausanne

BibTex

@misc{BUT109004,
  author="Tomáš {Chára} and Jakub {Tkacz} and Martin {Zmrzlý}",
  title="Study of the Passive Layer and Corrosion Resistance of Stainless Steels",
  year="2014",
  publisher="DGM",
  address="Lausanne",
  note="lecture"
}