Vysoké učení technické v Brně - Vnitřní projekty VUT

- plně financující (2017-01-01 - 2018-12-31)

FSI-S-17-4104

čeština

Píštěk Václav, prof. Ing., DrSc. - hlavní řešitel
Bartošová Daniela, Ing. - spoluřešitel
Bazala Jiří, Ing. - spoluřešitel
Dlugoš Jozef, Ing., Ph.D. - spoluřešitel
Drbal Milan, Ing. - spoluřešitel
Fojtášek Jan, Ing., Ph.D. - spoluřešitel
Janoušek Michal, Ing., Ph.D. - spoluřešitel
Kučera Pavel, doc. Ing., Ph.D. - spoluřešitel
Malášek Jiří, doc. Ing., Ph.D. - spoluřešitel
Novotný Pavel, prof. Ing., Ph.D. - spoluřešitel
Pokorný Prokop, Ing. - spoluřešitel
Porteš Petr, doc. Ing., Ph.D. - spoluřešitel
Prokop Aleš, Ing., Ph.D. - spoluřešitel
Řehák Kamil, Ing., Ph.D. - spoluřešitel
Škopán Miroslav, doc. Ing., CSc. - spoluřešitel
Špičák Milan, Ing., Ph.D. - spoluřešitel
Vajdák Martin, Ing. - spoluřešitel
Zeizinger Lukáš, Ing., Ph.D. - spoluřešitel

Ústav automobilního a dopravního inženýrství
- interní (01.01.2017 - 31.12.2019)
Fakulta strojního inženýrství
- příjemce (01.01.2017 - 31.12.2019)

PORTEŠ, P.; KUČERA, P.; PÍŠTĚK, V.; FOJTÁŠEK, J.; ZHÁŇAL, L. MODERN TOOLS FOR VEHICLE DEVELOPMENT. In Engineering Mechanics 2017. 1. Brno University of Technology, 2017. p. 54-57. ISBN: 978-80-214-5497-2.
Detail

KUČERA, P.; PÍŠTĚK, V. Analyses of truck powertrain torque and vibration. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2017. p. 101-106. ISSN: 2345-0533.
Detail

PROKOP, A.; ŘEHÁK, K. VIRTUAL PROTOTYPE APPLICATION TO HEAVY-DUTY VEHICLE GEARBOX CONCEPT. In Engineering Mechanics 2017. 1. 2017. p. 810-813. ISBN: 978-80-214-5497-2.
Detail

KUČERA, P.; PÍŠTĚK, V. Using HIL testing for Differential Lock Control. In Transport Means 2017 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas, LITHUANIA: 2017. p. 640-643. ISSN: 1822-296X.
Detail

KAŠPÁREK, J.; JONÁK, M.; ŠKOPÁN, M. Design of the tracked chassis module. In Transport Means 2017. Transport Means. Kaunas, Litevská republika: Technologija, 2017. p. 666-670. ISSN: 1822-296X.
Detail

ŘEHÁK, K.; KOPEČKOVÁ, B.; PROKOP, A. Numerical simulation of gearbox structure dynamics focused on backlash influence. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Geliu ratas 15A, LT-50282, Kaunas, Lithuania: JVE International Ltd., 2017. p. 115-120. ISSN: 2345-0533.
Detail

PROKOP, A.; KOPEČKOVÁ, B.; ŘEHÁK, K. Dynamic Analysis of Single Stage Gearbox Focused on Input Parameters Influence. In Transport Means 2017. Transport Means. Kaunas Lithuania: 2017. p. 479-484. ISSN: 1822-296X.
Detail

ŘEHÁK, K.; KOPEČKOVÁ, B.; PROKOP, A. Dynamic Analysis of Single Stage Gearbox with Backlash Influence. In Transport Means 2017. Transport Means. Kaunas Lithuania: 2017. p. 575-579. ISSN: 1822-296X.
Detail

KAŠPÁREK, J.; ŠKOPÁN, M. Experimental verification of regulated vibration on the subsoil. In Vibroengineering Procedia. Vibroengineering Procedia. Geliu ratas 15A, LT-50282, Kaunas, Lithuania: JVE International Ltd., 2017. p. 15-19. ISSN: 2345-0533.
Detail

PÍŠTĚK, V.; KUČERA, P.; NOZHENKO, O.; KRAVCHENKO, K.; SVÍDA, D. An unconventional rubber torsional vibration damper with two degrees of freedom. In Vibroengineering PROCEDIA. Vibroengineering Procedia. JVE International, 2017. p. 136-141. ISSN: 2345-0533.
Detail

GORBUNOV, M.; PÍŠTĚK, V.; KOVTANETS, M.; NOZHENKO, O.; KARA, S.; KUČERA, P.;. Research to improve traction and dynamic quality of locomotives. In Vibroengineering PROCEDIA. Vibroengineering Procedia. JVE International, 2017. p. 159-164. ISSN: 2345-0533.
Detail

NOZHENKO, O.; CHERNIAK, G.; PÍŠTĚK, V.; SUSLOV, E.; NOZHENKO, V.; KRAVCHENKO, K..; KUČERA, P.;. Results of the experimental research of dynamic vibration processes of the rail for rolling stocks fault diagnostics. In Vibroengineering PROCEDIA. Vibroengineering Procedia. JVE International, 2017. p. 165-170. ISSN: 2345-0533.
Detail

SUSLOV, E..; NOZHENKO, O.; ANATOLII, M.; PÍŠTĚK, V.; KUČERA, P.;. Using spectral analysis for flat wheel detections. In Vibroengineering PROCEDIA. Vibroengineering Procedia. JVE International, 2017. p. 171-174. ISSN: 2345-0533.
Detail

KUČERA, P.; PÍŠTĚK, V. Testing of the Mechatronic Robotic System of the Differential Lock Control on a Truck. International Journal of Advanced Robotic Systems, 2017, vol. 14, no. 5, p. 1-7. ISSN: 1729-8814.
Detail

ZEIZINGER, L.; POKORNÝ, P.; POKORNÝ, P. Návrhová optimalizace příhradových konstrukcí. In DYNAMIKA TUHÝCH A DEFORMOVATELNÝCH TĚLES 2017 SBORNÍK PŘEDNÁŠEK. Ústí nad Labem: Univerzita J. E. Purkyně v Ústí n. L., FVTM, 2017. s. 1-7. ISBN: 978-80-7561-083-6.
Detail

POKORNÝ, P.; ZEIZINGER, L. Napěťová analýza návrhu laboratorního modelu kontejnerového spreaderu. In 43. Medzinárodná vedecká konferencia katedier dopravných, manipulačných, stavebných a poľnohospodárskych strojov. Košice: Technická univerzita v Košiciach, 2017. s. 139-146. ISBN: 978-80-553-2828-7.
Detail

KUČERA, P.; PÍŠTĚK, V. Torsional analysis of the engine computational model. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2017. p. 25-28. ISSN: 2345-0533.
Detail

PÍŠTĚK, V.; KUČERA, P.; SVÍDA, D.; BERAN, M. A torsional vibration damper based on a serial viscoelastic coupling of its seismic mass. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2017. p. 56-60. ISSN: 2345-0533.
Detail

ŘEHÁK, K.; KOPEČKOVÁ, B.; PROKOP, A. Gear Drive System Simulation with Different Model of Input Speed. In Acoustics and Vibration of Mechanical Structures—AVMS-2017. Springer Proceedings in Physics. 1. Springer, Cham, 2017. p. 331-339. ISBN: 9783319698236. ISSN: 0930-8989.
Detail

PROKOP, A.; KOPEČKOVÁ, B.; ŘEHÁK, K. Gear Drive System Simulation of Input Parameters Effect on Rattle. In Acoustics and Vibration of Mechanical StructureS. Springer Proceedings in Physics. 1. Springer, Cham, 2017. p. 381-388. ISBN: 9783319698236. ISSN: 0930-8989.
Detail

NOVOTNÝ, P. Increasing The Mechanical Efficiency of Turbochargers. In Sborník přednášek XLVIII. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. 1. Liberec: Technická univerzita v Liberci, 2017. p. 145-157. ISBN: 978-80-7494-354-6.
Detail

ŠPIČÁK, M.; KNIGHT, J.; KUZENKO, A.; HARITOS, G.; GUOGANG, R. Investigation of Vehicle Ride Height and Diffuser Ramp Angle on Downforce and Efficiency. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2018, vol. 233, no. 8, p. 2139-2145. ISSN: 0954-4070.
Detail

KUČERA, P.; PÍŠTĚK, V. HIL TESTOVÁNÍ MECHTRONICKÉHO SYSTÉMU V LABORATORNÍCH PODMÍNKÁCH. Perners' Contacts, 2018, roč. XIII, č. 1, s. 83-89. ISSN: 1801-674X.
Detail

KUČERA, P.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. MEASUREMENT OF THE POWERTRAIN TORQUE. In Engineering Mechanics 2018. 1. 2018. p. 449-452. ISBN: 978-80-86246-88-8.
Detail

KUČERA, P.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. Transmission error analysis for heavy-duty gearbox. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 113-116. ISSN: 2345-0533.
Detail

PÍŠTĚK, V.; GORBUNOV, M.; KUČERA, P.; NOZHENKO, O. Comparison of torsional vibration dampers in terms of the dissipated power amount. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 68-72. ISSN: 2345-0533.
Detail

GORBUNOV, M.; PÍŠTĚK, V.; KOVTANETS, M.; NOZHENKO, O.; KARA, S.; KUČERA, P. Supplying system abrasive material with automatic dosing control. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 207-214. ISSN: 2345-0533.
Detail

JONÁK, M.; KAŠPÁREK, J.; HLOUŠEK, D. Dynamic simulation of the wheeled transport machine. In ZBІRNIK NAUKOVICH PRAC VІІІ-I MІŽNARODNOI NAUKOVO-PRAKTIČNOI KONFERENCІI «TRANSPORT І LOGІSTIKA: PROBLEMI TA RІŠENNA». Odessa, Ukrajina: VOLODYMYR DAHL EAST UKRAINIAN NATIONAL UNIVERSITY, 2018. p. 9-12. ISBN: 978-617-7414-37-6.
Detail

ZEIZINGER, L.; POKORNÝ, P. The consequence of using orthotropic material in a mechanical system. In Vibroengineering Procedia. Vibroengineering Procedia. Geliu ratas 15A, LT-50282, Kaunas, Lithuania: JVE International Ltd., 2018. p. 128-131. ISSN: 2345-0533.
Detail

KUČERA, P.; PÍŠTĚK, V. GEOMETRY OF FRONT AXLE OF ALL-TERRAIN VEHICLE WITH ELECTRIC DRIVE. In VІІІ-ї МІЖНАРОДНОЇ НАУКОВО-ПРАКТИЧНОЇ КОНФЕРЕНЦІЇ «ТРАНСПОРТ І ЛОГІСТИКА: ПРОБЛЕМИ ТА РІШЕННЯ». 2018. p. 188-190. ISBN: 978-617-7414-37-6.
Detail

ŘEHÁK, K.; KUČERA, P.; PROKOP, A. Parameter effecting the experimental determination of modal properties. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 96-100. ISSN: 2345-0533.
Detail

ZAJAC, R.; PROKOP, A.; ŘEHÁK, K. Determination of the modal parameters on the thin flat structures. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational Ltd., 2018. p. 91-95. ISSN: 2345-0533.
Detail

PROKOP, A.; KUČERA, P.; ŘEHÁK, K. Heavy-Duty Transmission Gear Shift Investigation by Virtual Prototypes. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 226-230. ISSN: 2345-0533.
Detail

DLUGOŠ, J.; NOVOTNÝ, P. Piston secondary motion measurement by laser displacement sensors. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 170-175. ISSN: 2345-0533.
Detail

FOJTÁŠEK, J. Heavy Commercial Vehicle Yaw Control Simulation. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas: JVE International Ltd., 2018. p. 138-143. ISSN: 2345-0533.
Detail

JONÁK, M.; HLOUŠEK, D.; ŘEHÁK, K. Experimental verification of the power required for the movement of the tracked vehicle. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational Ltd., 2018. p. 123-127. ISSN: 2345-0533.
Detail

DRÁPAL, L.; VOPAŘIL, J. Investigation of an Engine Block Load by means of Crank Train Rotating Parts. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2018. p. 117-122. ISSN: 2345-0533.
Detail

VOPAŘIL, J.; DRÁPAL, L. Computational Modelling and Measurement of Vibration of Power Train Mountings of a Passenger Car. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2018. p. 144-149. ISSN: 2345-0533.
Detail

KAŠPÁREK, J.; ŠKOPÁN, M.; POKORNÝ, P. Komprimační bočnice jako nástavbové zařízení pro forwardery. In Sborník přednášek 44. mezinárodní vědecké konference kateder dopravních, manipulačních, stavebních a zemědělských strojů. Kurdějov: Vysoké učení technické v Brně, Fakulta strojního inženýrství, 2018. s. 208-215. ISBN: 978-80-214-5644-0.
Detail

KUČERA, P.; PÍŠTĚK, V.; ŘEHÁK, K.; PROKOP, A. Kinematics of the front axle of All-Terrain Vehicle. In Transport Means 2018 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas, LITHUANIA: 2018. p. 560-563. ISSN: 1822-296X.
Detail

KUČERA, P.; PÍŠTĚK, V.; ŘEHÁK, K.; PROKOP, A. Transmission error analysis of the gearbox. In Transport Means 2018 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas, LITHUANIA: 2018. p. 705-708. ISSN: 1822-296X.
Detail

KAŠPÁREK, J.; ŠKOPÁN, M.; SEDLÁČEK, M. The development of the modular forwarder superstructure for the dendromass transport. In Transport Means 2018 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas, LITHUANIA: Kaunas University of Technology, Kaunas, LITHUANIA, 2018. p. 537-541. ISSN: 1822-296X.
Detail

ŠKOPÁN, M.; SEDLÁČEK, M.; KAŠPÁREK, J. The experimental testing of the operational capabilities of the compression superstructure prototype. In Transport Means 2018 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas: Kaunas University of Technology, Kaunas, LITHUANIA, 2018. p. 1156-1160. ISSN: 1822-296X.
Detail

DRÁPAL, L.; VOPAŘIL, J. Investigation of torsional vibration of an innovative crank train concept for a four-cylinder engine. In KOKA 2018 Scientific Proceedings. Nitra: Publishing Centre of Slovak University of Agriculture in Nitra, 2018. p. 73-78. ISBN: 978-80-552-1880-9.
Detail

DRÁPAL, L.; VOPAŘIL, J. Crank Train Concept Design of an In-Line Two-Cylinder Range Extender Engine. In Transport Means 2018 – Proceedings of the 22nd International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2018. p. 978-982. ISSN: 1822-296X.
Detail

DRÁPAL, L.; VOPAŘIL, J.; PÍŠTĚK, V. Crank Train Concept Design and Balancing of an Internal-Combustion Engine for Range Extending of an Electric Vehicle. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2018. p. 279-283. ISSN: 2345-0533.
Detail

BARTOŠOVÁ, D.; OTIPKA, V.; ŘEHÁK, K. Determination of transmission error in spur gear by numerical approach. In Vibroengineering PROCEDIA. Vibroengineering Procedia. 2018. p. 284-288. ISSN: 2345-0533.
Detail

DRBAL, M.; SVÍDA, D. Mathematical modelling of the rotary engine. In Vibroengineering PROCEDIA. Vibroengineering Procedia. KAUNAS, LITHUANIA: 2018. p. 289-292. ISSN: 2345-0533.
Detail

HLOUŠEK, D.; JONÁK, M. Using a Dynamic Simulation to Determine the Power Requirement for the Tracked Vehicle Movement. In Transport Means 2018 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas, LITHUANIA: Kaunas University of Technology, Kaunas, LITHUANIA, 2018. p. 1024-1026. ISSN: 1822-296X.
Detail

POKORNÝ, P.; KAŠPÁREK, J.; ŠKOPÁN, M. Provozní schopnosti prototypu nástavby komprimačních bočnic. In Dynamics of rigid and deformable bodies 2018 - Proceeding of conference. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, Fakulta strojního inženýrství, 2018. s. 135-141. ISBN: 978-80-7561-142-0.
Detail

PORTEŠ, P.; ZHÁŇAL, L.; FOJTÁŠEK, J. Complex approach to computations and analysis of vehicle dynamics. In Vibroengineering Procedia. Vibroengineering Procedia. Lithuania: JVE International, 2018. p. 132-137. ISSN: 2345-0533.
Detail

DRÁPAL, L.; VOPAŘIL, J. Design Concept of a Crankshaft for Reduction of Main Bearings Power Losses and a Deep Skirt Engine Block Load. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME) 2018. Brno: Brno University of Technology, 2018. p. 533-536. ISBN: 978-80-214-5543-6.
Detail

NOVOTNÝ, P.; JONÁK, M.; DOMAN, J. Vibration analysis of the turbocharger considering low frequency excitations. In Transport Means 2018 – Proceedings of the 22nd International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2018. p. 759-764. ISSN: 1822-296X.
Detail

NOVOTNÝ, P.; JONÁK, M.; DLUGOŠ, J.; HLINÍK, J.; DOMAN, J. Solution approaches and tools for turbocharger development. In KOKA 2018 Scientific Proceedings. Nitra: Publishing Centre of Slovak University of Agriculture in Nitra, 2018. p. 79-88. ISBN: 978-80-552-1880-9.
Detail

NOVOTNÝ, P. Virtual Turbocharger – A Tool for Powertrain Development. Stuttgart, Germany: FEV GmbH, 2018. p. 1-20.
Detail

KUČERA, P.; PÍŠTĚK, V. Computational Model of a Truck Transmission. ІХ-ої МІЖНАРОДНОЇ НАУКОВО-ПРАКТИЧНОЇ КОНФЕРЕНЦІЇ «ТРАНСПОРТ І ЛОГІСТИКА: ПРОБЛЕМИ ТА РІШЕННЯ». 2019. p. 140-140. ISBN: 978-617-7414-66-6.
Detail

PÍŠTĚK, V.; KUČERA, P. Methanol as a fuel variant for tomorrow. ІХ-ої МІЖНАРОДНОЇ НАУКОВО-ПРАКТИЧНОЇ КОНФЕРЕНЦІЇ «ТРАНСПОРТ І ЛОГІСТИКА: ПРОБЛЕМИ ТА РІШЕННЯ». 2019. p. 141-144. ISBN: 978-617-7414-66-6.
Detail

ZEIZINGER, L.; POKORNÝ, P.; POKORNÝ, P. Důsledky použití ortotropního materiálu pro demoliční zařízení. In Sborník přednášek 44. mezinárodní vědecké konference kateder dopravních, manipulačních, stavebních a zemědělských strojů. Kurdějov: Vysoké učení technické v Brně, Fakulta strojního inženýrství, 2018. s. 222-226. ISBN: 978-80-214-5644-0.
Detail

ZEIZINGER, L. Koncepční návrh pohonu dálkové pásové dopravy. In Dynamics of rigid and deformable bodies 2018 - Proceeding of conference. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, Fakulta strojního inženýrství, 2018. s. 221-225. ISBN: 978-80-7561-142-0.
Detail

ŠPIČÁK, M. Longitudinal Performance Optimization of RWD Vehicle. Perners' Contacts, 2019, no. 55, p. 12-17. ISSN: 1801-674X.
Detail

KUČERA, P.; PÍŠTĚK, V. Prototyping a System for Truck Differential Lock Control. SENSORS, 2019, vol. 19, no. 16, p. 1-18. ISSN: 1424-8220.
Detail

DRÁPAL, L.; VOPAŘIL, J. Introduction to Crank Train Concept Design of an Internal-combustion Engine for the Range Extender of an Electric Vehicle. In Proceedings of the L. International Conference of Czech and Slovak Universities and Institutions Dealing with the Motor Vehicles and Internal Combustion Engines Research. Brno: Mendelova univerzita v Brně, 2019. p. 71-77. ISBN: 978-80-7509-668-5.
Detail

KAŠPÁREK, J.; ŠKOPÁN, M.; POKORNÝ, P. Identifikace silových účinků při pracovním režimu vyvážecího stroje. In Sborník - 45. mezinárodní vědecká konference kateder dopravních, manipulačních, stavebních a zemědělských strojů. Plzeň: Západočeská univerzita v Plzni, 2019. s. 113-119. ISBN: 978-80-261-0884-9.
Detail

DRÁPAL, L.; VOPAŘIL, J. Modification of Valve Train with Overhead Valves of Inverted Aircraft Reciprocating Engine. In Transport Means 2019, Sustainability: Research and Solutions – Proceedings of the 23rd International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2019. p. 734-737. ISSN: 1822-296X.
Detail

KAŠPÁREK, J.; ŠKOPÁN, M.; POKORNÝ, P.; HLOUŠEK, D. Reverse analysis of the frame destruction causes. In Transport Means 2019, Sustainability: Research and Solutions – Proceedings of the 23rd International Scientific Conference. Transport Means. Palanga, Lithuania: Kaunas university of technology, 2019. p. 1364-1369. ISSN: 1822-296X.
Detail

KRPALEK, D.; PROKOP, A.; ŘEHÁK, K. Innovative Technology Application for Design of Bogie Drive Components. 2019.
Detail

ŘEHÁK, K.; KUČERA, P.; PROKOP, A. Application of Virtual Prototype to Heavy-duty Gearbox housing evaluation. In TRANSBALTICA XI: Transportation Science and Technology. Springer International Publishing, 2019. p. 361-368. ISBN: 978-3-030-38665-8.
Detail

PROKOP, A.; ŘEHÁK, K.; ZAJAC, R.; OTIPKA, V. Gear Shift Investigation Using Virtual Prototype. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. Springer Science and Business Media Deutschland GmbH, 2019. p. 415-424. ISBN: 978-3-030-54135-4.
Detail

ŘEHÁK, K.; PROKOP, A.; ZAJAC, R.; OTIPKA, V. Acoustic and Vibration Response Analysis of Heavy-Duty Gearbox. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. Springer Science and Business Media Deutschland GmbH, 2019. p. 443-451. ISBN: 978-3-030-54135-4.
Detail

OTIPKA, V.; ZAJAC, R.; ŘEHÁK, K.; PROKOP, A. Numerical dynamic analysis of gearbox behaviour. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. Springer Science and Business Media Deutschland GmbH, 2019. p. 433-441. ISBN: 978-3-030-54135-4.
Detail

PROKOP, A.; ŘEHÁK, K. Gear Shift Simulation by Using Virtual Prototype. In Vibroengineering PROCEDIA, Vol. 29. Vibroengineering Procedia. 2019. p. 6-11. ISSN: 2345-0533.
Detail

FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Strength determination of wagon bearing structures made of round pipes at railroad ferry transportation. In Vibroengineering Procedia. Vibroengineering Procedia. 2019. p. 100-105. ISSN: 2345-0533.
Detail

FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Dynamic load computational modelling of containers placed on a flat wagon at railroad ferry transportation. In Vibroengineering Procedia. Vibroengineering Procedia. 2019. p. 118-123. ISSN: 2345-0533.
Detail

FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Dynamic load effect on the transportation safety of tank containers as part of combined trains on railway ferries. In Vibroengineering Procedia. Vibroengineering Procedia. 2019. p. 124-129. ISSN: 2345-0533.
Detail

NOVOTNÝ, P.; ŠKARA, P. Multibody simulation of turbocharger transient rotordynamics. In ENGINEERING MECHANICS 2019. First edition. 2019. p. 259-262. ISBN: 978-80-87012-71-0.
Detail

NOVOTNÝ, P.; HRABOVSKÝ, J. Review of methods for increasing the mechanical efficiency of exhaust gas turbochargers. In Proceedings of the L. International Scientific Conference of Czech and Slovak Universities and Institutions Dealing with Motor Vehicles and Internal Combustion Engines Research – KOKA 2019. 1. Nitra: Publishing Centre of Slovak University of Agriculture in Nitra, 2019. p. 225-234. ISBN: 978-80-7509-668-5.
Detail

BAZALA, J.; FISCHER, O.; HÉBERT, G. Effect of Cooler Design on Particulate fouling. In Heat Exchanger Fouling and Cleaning XI - 2017. 2017. p. 70-74. ISBN: 978-0-9984188-0-3.
Detail

HÉBERT, G.; BAZALA, J.; FISCHER, O.; NOTHBAUM, J.; THEWES, M.; VOSSHALL, T. Exhaust Gas Condensate as an Enabler for Self-Contained Water Injection Systems. In 28th. Aachen Colloquium Automovile and Engine Technology 2019. 2019. p. 1081-1102. ISBN: 978-3-00-060311-2.
Detail

NOVOTNÝ, P.; HRABOVSKÝ, J. Efficient computational modelling of low loaded bearings of turbocharger rotors. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, vol. 174, no. 2020, p. 374-383. ISSN: 0020-7403.
Detail

DRBAL, M. Computational Model of Rotary Engine Thermodynamic Cycle. Acta Mechanica Slovaca, 2019, vol. 23, no. 2, p. 26-29. ISSN: 1335-2393.
Detail

ZHÁŇAL, L.; PORTEŠ, P. Calculation of mechanism motion using discrete time approach. Vibroengineering Procedia, 2018, vol. 18, no. 18, p. 222-225. ISSN: 2345-0533.
Detail

ŠKOPÁN, M. Recyklace stavebních a demoličních odpadů v ČR v podmínkách novelizované legislativy. Waste forum, 2017, roč. 2017, č. 5, s. 505-510. ISSN: 1804-0195.
Detail

MAUDER, T.; PORTEŠ, P.: Random Road; Random Road v.01. Budova A3, místnost 301, areál FSI, VUT v Brně. URL: http://www.uadi.fme.vutbr.cz/vyzkum-produkty-vav. (software)
Detail

ŠKOPÁN, M.; ZEIZINGER, L.; HLOSKA, J.; POKORNÝ, P.; MALÁŠEK, J.; KAŠPÁREK, J.; POKORNÝ, P.; SEDLÁČEK, M.; HLOUŠEK, D.: 44. Mezinárodní vědecká konference kateder dopravních, manipulačních, stavebních a zemědělských strojů. Kurdějov (11.09.2018)
Detail

KUČERA, P.; PÍŠTĚK, V.: IX - International Scientific-Practical Conference - Transport and logistics: problems and solutions. Odessa (22.05.2019)
Detail

DRÁPAL, L.; NOVOTNÝ, P.: KOKA 2019. Lednice (11.09.2019)
Detail

ŘEHÁK, K.; PROKOP, A.; PÍŠTĚK, V.: Vibroengineering 2018. Brno (22.05.2018)
Detail

KAŠPÁREK, J.; ZEIZINGER, L.; HLOUŠEK, D.: Dynamika tuhých a deformovatelných těles 2018. Ústí nad Labem (17.10.2018)
Detail