Detail projektu

Studie vlivu přípravy vzorků na výsledné vlastnosti anorganických pojiv

Období řešení: 01.01.2015 — 31.12.2017

Zdroje financování

Grantová agentura České republiky - Standardní projekty

- plně financující (2015-01-01 - 2017-12-31)

O projektu

Projekt se zabývá sledováním vlivu technologie přípravy vzorků na výsledné vlastnosti anorganických pojiv, a to zejména cementu a vápna. V souvislosti s požadavky na redukci množství skleníkových plynů produkovaných v rámci technologie výroby cementu e třeba stále hledat nové přístupy a technologie. Relevantní cestou je příprava směsných cementů metodou vysokoenergetického mletí s využitím alternativních surovin, které budou po úpravě ve směsných cementech působit fyzikálně chemicky jako pucolán. rámci projektu budou sledovány vlivy nových dostupných technologií mletí pomocí vysokorychlostních desintegrátorů na výsledné mineralogické, chemické a fyzikálně mechanické vlastnosti směsných cementů. Problematika vlastností vápen je zcela zásadní pro jejich využití. Například tvrdě pálená vápna pro výrobu pórobetonů se prozatím nedaří běžně vyrobit v pecích na plynná paliva. V této oblasti jde o objasnění příčiny vlivů, které výpalem dávají vápno nestandardních vlastností.

Popis anglicky
The project deals with monitoring of the effect of sample preparation technology on final properties of inorganic binders, especially cement and lime. In the context of requirements to reduce the amount of greenhouse gases produced within the cement industry it is necessary to seek new approaches and technologies. Relevant route is the preparation of blended cements by high energy milling with the use of alternative materials which will be used in blended cements physico-chemically as pozzolan. The roject will observed the effects of the new available milling technologies especially high-speed disintegrators on the final mineralogical, chemical and physico-mechanical properties of blended cements. The issue of lime properties is essential for their use. For example, hard burnt lime for the production of porous concrete is very difficult to produce in kilns burning gaseous fuels. In this area, in terms of clarifying the cause of effects which give the lime with non-standard properties by burning.

Klíčová slova
cement, vápno, mletí

Klíčová slova anglicky
cement, lime, milling

Označení

GA15-08755S

Originální jazyk

čeština

Řešitelé

Dvořák Karel, doc. Ing., Ph.D. - hlavní řešitel

Útvary

Centrum AdMaS
- příjemce (30.09.2014 - nezadáno)

Výsledky

HÁJKOVÁ, I.; DVOŘÁK, K.; FRIDRICHOVÁ, M.; DOLÁK, D. Influence of grinding processes on gypsum microstructure. In Ekologie a nové stavební hmoty a výrobky. Advanced Materials Research. Švýcarsko: 2015. p. 151-155. ISBN: 978-3-03835-587-8. ISSN: 1022-6680.
Detail

TKACHENKO, S.; DVOŘÁK, K.; JECH, D.; SLÁMEČKA, K.; KLAKURKOVÁ, L.; PALOUŠEK, D.; ČELKO, L. Wear of grinding rotors with thermally-sprayed coatings in a high-speed mill. WEAR, 2018, vol. 412-413, no. 1, p. 49-59. ISSN: 0043-1648.
Detail

DVOŘÁK, K.; HÁJKOVÁ, I. The Effect of High-Speed Grinding Technology on the Properties of Fly Ash. Materiali in tehnologije, 2016, vol. 50, no. 5, p. 683-687. ISSN: 1580-2949.
Detail

DVOŘÁK, K.; DOLÁK, D.; VŠIANSKÝ, D.; DOBROVOLNÝ, P. Evaluation of the Grindability of Recycled Glass in the Production of Blended Cements. Materiali in tehnologije, 2016, vol. 50, no. 5, p. 729-734. ISSN: 1580-2949.
Detail

DOLÁK, D.; DVOŘÁK, K.; HÁJKOVÁ, I. VPLYV TECHNOLÓGIE MLETIA NA VLASTNOSTI PORTLANDSKÉHO CEMENTU. In CONSTRUMAT 2016, Sborník příspěvků z XXII. mezinárodní konference o stavebních materiálech. Jan Kočí, Eva Vejmelková. Praha: České vysoké učení technické v Praze, 2016. s. 90-98. ISBN: 978-80-01-05958-6.
Detail

BUREŠ, J.; DOLÁK, D.; DVOŘÁK, K.; VŠIANSKÝ, D. Initial analysis for study of pure limestone decarbonation. In Binders, Materials and Technologies in Modern Construction II. Materials Science Forum. 2016. Switzerland: Trans tech publications Ltd, 2016. p. 81-87. ISBN: 978-3-03835-740-7. ISSN: 0255-5476.
Detail

DVOŘÁK, K.; DOLÁK, D.; DOČKAL, J. Comparison of separate and co-grinding of the blended cements with the pozzolanic component. In Procedia Engineering. Procedia Engineering. Nizozemsko: Elsevier, 2016. p. 66-72. ISBN: 978-1-5108-2855-1. ISSN: 1877-7058.
Detail

MIKULICA, K.; HÁJKOVÁ, I. Testing of technological properties of foam concrete. In Binders, Materials and Technologies in Modern Construction II. Materials Science Forum. Switzerland: Trans tech publication, 2016. p. 229-233. ISSN: 0255-5476.
Detail

DOLÁK, D.; DVOŘÁK, K. Impact of milling intensifiers on specific surface area of cement. In Special concrete and Compisites 2016. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications Ltd, 2016. p. 140-145. ISBN: 978-3-0357-1079-3. ISSN: 1013-9826.
Detail

DOLÁK, D.; BUREŠ, J.; DVOŘÁK, K.; VŠIANSKÝ, D. STUDIUM REAKTIVITY VÁPNA NA VYBRANÝCH VZORCÍCH VÁPENCŮ. Vápenický seminář 2016. 10. Hradec Králová: Vustah, 2016. s. 55-60.
Detail

DOLÁK, D.; DVOŘÁK, K.; BUREŠ, J.; VŠIANSKÝ, D. Dependence of residual CO2 of limestones on apparent density. In Dependence of residual CO2 of limestones on apparent density. Procedia Engineering. Elsevier, 2017. p. 232-238. ISSN: 1877-7058.
Detail

DOLÁK, D.; DVOŘÁK, K.; VŠIANSKÝ, D.; BUREŠ, J. Methodology of sample selection for study of limestone decarbonation. In Sborník MBMST 2016. Procedia Engineering. Netherlands: Procedia engineering, 2017. p. 157-164. ISSN: 1877-7058.
Detail

DOLÁK, D.; DVOŘÁK, K. VZTAH REAKTIVITY A SEDIMENTAČNÉHO OBJEMU ROZNYCH DRUHOV VÁPNA. In Juniorstav 2017. Brno: VUT v Brně, 2017. s. 1-7. ISBN: 978-80-214-5473-6.
Detail

DOLÁK, D.; DVOŘÁK, K.; HÁJKOVÁ, I. Srovnání konečných vlastností portlandských cementů vlivem druhu mletí. TZB-info, 2017, roč. 19, č. 5, s. 1-6. ISSN: 1801-4399.
Detail

DVOŘÁK, K.; DOLÁK, D.; DOBROVOLNÝ, P. The Improvement of the Pozzolanic Properties of Recycled Glass during the Production of Blended Portland Cements. In International High- Performance Built Environment Conference – A Sustainable Built Environment Conference 2016 Series. Procedia Engineering. Netherlands: Elsevier, 2017. p. 1229-1236. ISSN: 1877-7058.
Detail

DOLÁK, D.; DVOŘÁK, K.; BUREŠ, J.; GAZDIČ, D. Comparison of mineralogical changes during thermal processing of limestones. In Binders, Materials and Technologies in Modern Construction III. Materials Science Forum. Switzerland: Trans Tech Publishing Ltd., 2017. p. 56-60. ISBN: 978-3-0357-1157-8. ISSN: 0255-5476.
Detail

DOLÁK, D.; DVOŘÁK, K.; BUREŠ, J. Effect of firring temperature on reactivity and sedimentation volume of different types of limestones. In Binders, Materials and Technologies in Modern Constructions III. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 45-50. ISBN: 978-3-0357-1157-8. ISSN: 0255-5476.
Detail

DVOŘÁK, K.; ŠVÉDA, M. Effect of ageing period on properties of mechanically activated Portland cement. In Special Concrete and Composites 2017. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2018. p. 37-42. ISBN: 978-3-0357-1240-7. ISSN: 1013-9826.
Detail

DVOŘÁK, K.; DOLÁK, D. Alternative Evaluation of the grindability of Pozzolanic Materials for Cement Production. In 3rd International Conference on Innovative Materials, Structures and Technologies (IMST 2017). IOP Conference Series: Materials Science and Engineering. United Kingdoms: IOP Publishing, 2017. p. 92-100. ISSN: 1757-8981.
Detail

DVOŘÁK, K.; DOLÁK, D.; PALOUŠEK, D.; ČELKO, L.; JECH, D. The Effect of the Wear of Rotor Pins on Grinding Efficiency in a High-speed Disintegrator. Materials Science, 2018, vol. 24, no. 1, p. 29-34. ISSN: 1392-1320.
Detail

KALASOVÁ, D.; DVOŘÁK, K.; SLOBODNÍK, M.; VŠIANSKÝ, D.; ZIKMUND, T.; DLUHOŠ, J.; VÁŇA, R.; BUREŠ, J.; KAISER, J. Characterization of inner structure of limestone by X-ray computed sub-micron tomography. CONSTRUCTION AND BUILDING MATERIALS, 2018, vol. 174, no. 1, p. 693-700. ISSN: 1879-0526.
Detail

DVOŘÁK, K.; RAVASZOVÁ, S.; GAZDIČ, D. Effect of milling agents on pozzolanic activity of glass. In Binders, Materials and Technologies in Modern Construction IV. Solid State Phenomena. Switzerland: Trans Tech Publications, 2018. p. 47-52. ISBN: 978-3-0357-1348-0. ISSN: 1662-9779.
Detail

DVOŘÁK, K.; DOLÁK, D.; BUREŠ, J.; VŠIANSKÝ, D.; RAVASZOVÁ, S. The ralation of limestone origin and its reactivity to the preparation of desulphurization agents. In Binders, Materials and Technologies in Modern Construction IV. Solid State Phenomena. Switzerland: Trans Tech Publications, 2018. p. 83-88. ISBN: 978-3-0357-1348-0. ISSN: 1662-9779.
Detail

DVOŘÁK, K.; SKLENÁŘOVÁ, D.; DOLÁK, D.; STACHOVÁ, J. Effect of the firing process to the lime crystallinity. In Binders, Materials and Technologies in Modern Construction IV. Solid State Phenomena. Switzerland: Trans Tech Publications, 2018. p. 89-94. ISBN: 978-3-0357-1348-0. ISSN: 1662-9779.
Detail

DVOŘÁK, K.; DOLÁK, D.; HÁJKOVÁ, I. Impact of Grinding Technology on Final Properties of Portland Cement. In Cpecial Concrete and Composites 2015. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications Ltd., 2015. p. 191-197. ISBN: 978-3-03835-579-3. ISSN: 1013-9826.
Detail