Evropská unie - OP VK - Oblast podpory 2.3 - Lidské zdroje ve VaV

- plně financující (2012-07-01 - 2015-06-30)

EE2.3.30.0039

čeština

Tomešová Lucie, Ing., MPA - hlavní řešitel
Badíková Iveta, Ing. - spoluřešitel
Bejček Vlastimil, Ing., CSc. - spoluřešitel
Dobai Roland, Ing., Ph.D. - spoluřešitel
Hruška Tomáš, prof. Ing., CSc. - spoluřešitel
Kotoul Michal, prof. RNDr., DrSc. - spoluřešitel
Přikryl Zdeněk, Ing., Ph.D. - spoluřešitel
Sekanina Lukáš, prof. Ing., Ph.D. - spoluřešitel
Zemčík Pavel, prof. Dr. Ing., dr. h. c. - spoluřešitel

Centrum podpory projektů
- odpovědné pracoviště (01.11.2016 - nezadáno)
Fakulta elektrotechniky a komunikačních technologií
- spolupříjemce (01.07.2012 - nezadáno)
Fakulta strojního inženýrství
- spolupříjemce (01.07.2012 - 30.06.2015)
Středoevropský technologický institut VUT
- spolupříjemce (25.07.2012 - nezadáno)
Ústav informačních systémů
- spolupříjemce (01.07.2012 - 30.06.2015)
Ústav počítačové grafiky a multimédií
- spolupříjemce (01.07.2012 - 30.06.2015)
Ústav počítačových systémů
- spolupříjemce (01.07.2012 - 30.06.2015)
Rektorát
- příjemce (01.07.2012 - nezadáno)

ROUPEC, J.; MAZŮREK, I.; STRECKER, Z.; KLAPKA, M. The Behavior of the MR Fluid During Durability Test. Journal of Physics: Conference Series, 2012, vol. 412, no. 1, p. 1-8. ISSN: 1742-6588.
Detail

MAJER, Z.; NÁHLÍK, L. Micro-Crack Propagation in Particulate Composite with Different Types of Matrix. Applied Mechanics and Materials, 2012, vol. 245, no. 1, p. 138-143. ISSN: 1660-9336.
Detail

MAZŮREK, I.; ROUPEC, J.; KLAPKA, M.; STRECKER, Z. Load and rheometric unit for the test of magnetorheological fluid. MECCANICA, 2013, vol. 48, no. 3, p. 631-641. ISSN: 0025-6455.
Detail

ŠMERKOVÁ, K.; DOSTÁLOVÁ, S.; ŠKUTKOVÁ, H.; VACULOVIČOVÁ, M.; ADAM, V.; PROVAZNÍK, I.; KIZEK, R. Isolation of Xis Gen Fragment of lambda Phage from Agarose Gel Using Magnetic Particles for Subsequent Enzymatic DNA Sequencing. CHROMATOGRAPHIA, 2012, vol. 2012, no. 10, p. 1-6. ISSN: 0009-5893.
Detail

MARTON, D. Vodohospodářské řešení zásobního objemu nádrže v podmínkách nejistotou měření ovlivněných hydrologických dat. In Zborník súťažných prác mladých odborníkouv. Bratislava: Slovenský hydrometeorologický ústav, 2012. s. 1-10. ISBN: 978-80-88907-81-7.
Detail

REBENDA, J.; ŠMARDA, Z. Stability and asymptotic properties of a system of functional differential equations with nonconstant delays. APPLIED MATHEMATICS AND COMPUTATION, 2013, vol. 219, no. 12, p. 6622-6632. ISSN: 0096-3003.
Detail

ŠIKULA, O.; MĚRKA, V.; PLÁŠEK, J.; HIRŠ, J. VYUŽITÍ SOLÁRNÍCH ZISKŮ VE VZDUCHOTECHNICE. In VYKUROVANIE 2013 21. medzinárodná konferencia na tému: Energetické, environmentálne a ekonomické aspekty pri prevádzke vykurovacích systémov. Bratislava: Slovenská spoločnosť pre techniku prostredia ZSVTS Bratislava, 2013. s. 277-280. ISBN: 978-80-89216-53-6.
Detail

FILKUSOVÁ, M.; FEDORKOVÁ, A.; ORIŇÁKOVÁ, R.; ORIŇÁK, A.; NOVÁKOVÁ, Z.; ŠKANTÁROVÁ, L. Effect of multi-walled carbon nanotubes on the thermal stability and surface morphology of LiFePO4 cathode material. NEW CARBON MATERIALS, 2013, vol. 28, no. 1, p. 1-7. ISSN: 1007-8827.
Detail

ČEKON, M. Thermodynamic properties of reflective coatings. In International conference proceedings enviBUILD 12. Advanced Materials Research. Switzerland: Trans Tech Publications, 2013. p. 179-182. ISBN: 978-3-03785-596-6. ISSN: 1022-6680.
Detail

SLÁVIK, R.; ČEKON, M.; KALOUSEK, M. Numerická analýza priebehu teplôt horného plášťa vetraných dvojplášťových strešných konštrukcií s vplyvom sálania oblohy. In ZBORNÍK z konferencie s medzinárodnou účasťou PORUCHY A OBNOVA OBALOVÝCH KONŠTRUKCIÍ BUDOV. 1. Podbanské - Vysoké tatry, SR: Technická univerzita v Kośiciach, Stavebná fakulta, 2013. s. 124-132. ISBN: 978-80-553-1393-1.
Detail

ŠIMŠÍKOVÁ, M.; ANTALÍK, M.; KAŇUCHOVÁ, M.; ŠKVARLA, J. Cytochrome c conjugated to ZnO–MAA nanoparticles: The study of interaction and influence on protein structure. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2013, vol. 59, no. 1, p. 235-241. ISSN: 0141-8130.
Detail

PLÁŠEK, J.; ŠIKULA, O. NUMERICKÁ SIMULACE ROZLOŽENÍ STŘEDNÍ RADIAČNÍ TEPLOTY V HALE PROVOZNÍHO OŠETŘENÍ VOZŮ METRA VYTÁPĚNÉ SÁLAVÝMI OTOPNÝMI PANELY. In Konference Vytápění Třeboň 2013. Praha: Společnost pro techniku prostředí, 2013. s. 271-275. ISBN: 9788002024316.
Detail

DRDA, M.; ŠIKULA, O.; PLÁŠEK, J. EKONOMICKO-ENVIRONMENTÁLNÍ ANALÝZA NÁVRHU VZT JEDNOTEK PRO TEPLOVZDUŠNÉ VYTÁPĚNÍ – PŘÍPADOVÁ STUDIE. In Konference Vytápění Třeboň 2013. Praha: Společnost pro techniku prostředí, 2013. s. 254-258. ISBN: 9788002024316.
Detail

DLUGOŠ, J.; ROUPEC, J.; STRECKER, Z.; MAZŮREK, I. Problems of FEM Simulation of Magnetorheological Clutch's Magnetic Circuit. In Engineering Mechanics 2013. 19th international Conference. Praha: IT ASCR, 2013. p. 29-30. ISBN: 978-80-87012-46-8.
Detail

ČEKON, M.; KALOUSEK, M. "Reflexné" vlastnosti stavebných náterov. In Tepelná ochrana budov 2013. Štrbské Pleso: BB Print s.r.o., 2013. s. 73-76. ISBN: 9788089627028.
Detail

ČEKON, M.; INGELI, R. Účinnosť náterových hmôt na báze keramických dutých mikroguličiek vo vzťahu s tepelnou ochranou budov. In Tepelná ochrana budov 2013. Štrbské Pleso: BB Print s.r.o., 2013. s. 77-80. ISBN: 9788089627028.
Detail

ŠOTNER, R.; LAHIRI, A.; KARTCI, A.; HERENCSÁR, N.; JEŘÁBEK, J.; VRBA, K. Design of Novel Precise Quadrature Oscillators Employing ECCIIs with Electronic Control. ADV ELECTR COMPUT EN, 2013, vol. 13, no. 2, p. 65-72. ISSN: 1582-7445.
Detail

ŠOTNER, R.; JEŘÁBEK, J.; HERENCSÁR, N. Voltage Differencing Buffered/Inverted Amplifiers and Their Applications for Signal Generation. Radioengineering, 2013, vol. 22, no. 2, p. 490-504. ISSN: 1210-2512.
Detail

REBENDA, J.; ŠMARDA, Z. Stability of a Functional Differential System with a Finite Number of Delays. Abstract and Applied Analysis, 2013, vol. 2013, no. Article ID 85313, p. 1-11. ISSN: 1085-3375.
Detail

ŠOTNER, R.; JEŘÁBEK, J.; JAIKLA, W.; HERENCSÁR, N.; VRBA, K.; DOSTÁL, T. Novel Oscillator Based on Voltage and Current-Gain Adjusting Used for Control of Oscillation Frequency and Oscillation Condition. Elektronika Ir Elektrotechnika, 2013, vol. 19, no. 6, p. 75-80. ISSN: 1392-1215.
Detail

HNILICA, O.; PLÁŠEK, J. BSim Simulation of Indoor Climate of Romanesque Rotunda in Znojmo. In Proceedings of CLIMA 2013. 1st Edition. Praha: Society of Environmental Engineering (STP), 2013. p. 614-623. ISBN: 978-80-260-4001-9.
Detail

FEDORKOVÁ, A.; ORIŇÁKOVÁ, R.; ORIŇÁK, A.; SEDLAŘÍKOVÁ, M. LiFePO4 cathode material for Li-ion batteries modified with conductive polymer PPy/PEG. 18th Meeting of the Portuguese Electrochemical Society. Porto, Portugalsko: 2013. p. 48-48. ISBN: 978-989-95527-1-5.
Detail

FEDORKOVÁ, A.; ORIŇÁKOVÁ, R.; ČECH, O.; SEDLAŘÍKOVÁ, M. New Composite Cathode Materials for Li/S Batteries: A Review. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2013, vol. 8, no. 8, p. 10308-10319. ISSN: 1452-3981.
Detail

FEDORKOVÁ, A. PPy/PEG-LiFePO4 Cathode Material for Li-ion Batteries. In Book of abstracts, NFA 2012, Nanomaterials: Fundamentals and Applications. Košice: UPJS, 2012. p. 12-12. ISBN: 978-80-7097-970-9.
Detail

ŠOTNER, R.; HRUBOŠ, Z.; HERENCSÁR, N.; JEŘÁBEK, J.; DOSTÁL, T.; VRBA, K. Precise Electronically Adjustable Oscillator Suitable for Quadrature Signal Generation Employing Active Elements with Current and Voltage Gain Control. CIRCUITS SYSTEMS AND SIGNAL PROCESSING, 2014, vol. 33, no. 1, p. 1-35. ISSN: 0278-081X.
Detail

VACULOVIČOVÁ, M.; ŠMERKOVÁ, K.; PEKÁRKOVÁ, J.; HUBÁLEK, J.; ADAM, V.; KIZEK, R. Glutathione modified CdTe quantum dots as a label for studying DNA interactions with platinum based cytostatics. Electrophoresis, 2013, vol. 34, no. 6, p. 801-808. ISSN: 0173-0835.
Detail

VACULOVIČOVÁ, M.; ŠMERKOVÁ, K.; SEDLÁČEK, J.; VYSLOUŽIL, J.; HUBÁLEK, J.; KIZEK, R.; ADAM, V. Integrated chip electrophoresis and magnetic particle isolation used for detection of hepatitis B virus oligonucleotides. Electrophoresis, 2013, vol. 34, no. 11, p. 1548-1554. ISSN: 0173-0835.
Detail

MAJER, Z.; MARCIÁN, P.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Particulate Composite Damage: Numerical Estimation of Micro-Crack Propagation Direction. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 445-448. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
Detail

ŠIKULA, O.; PLÁŠEK, J.; HIRŠ, J. The Effect of Shielding Barriers on Solar Air Collector Gains. In TerraGreen 13 International Conference 2013 - Advancements in Renewable Energy and Clean Environment. Proceedings of a meeting held 15-17 February 2013, Beirut, Lebanon. Energy Procedia. Amsterdam: Elsevier, 2013. p. 1070-1075. ISBN: 9781629935706. ISSN: 1876-6102.
Detail

KISELA, T. Power functions and essentials of fractional calculus on isolated time scales. Advances in Difference Equations, 2013, vol. 2013, no. 8, p. 1-18. ISSN: 1687-1847.
Detail

ŠIMŠÍKOVÁ, M.; ANTALÍK, M.; KAŇUCHOVÁ, M.; ŠKVARLA, J. Anionic 11-mercaptoundecanoic acid capped ZnO nanoparticles. Applied Surface Science, 2013, vol. 282, no. 1, p. 342-347. ISSN: 0169-4332.
Detail

MAJER, Z.; HUTAŘ, P.; NÁHLÍK, J. Determination of the Effect of Interphase on Fracture Toughness and the Stiffness of a Polymer Particulate Composite. MECHANICS OF COMPOSITE MATERIALS, 2013, vol. 49, no. 5, p. 1-12. ISSN: 0191-5665.
Detail

PETRÁČEK, J.; EKSIOGLU ÖZOK, Y.; STERKHOVA, A. Simulation of self-pulsing in Kerr-nonlinear coupled ring resonators. Optics Communications, 2014, vol. 318, no. 5, p. 147-151. ISSN: 0030-4018.
Detail

ČEKON, M.; KALOUSEK, M.; HRAŠKA, J. Verification of MZELWE module in ESP-r programme with experimental confrontation. In Research and Applications in Structural Engineering, Mechanics and Computation. CRC Press, Taylor&Francis Group. Cape Town, JAR: CRC Press, Balkema, Taylor&Francis Group, 2013. p. 649-650. ISBN: 978-1-138-00061-2.
Detail

ČEKON, M.; KALOUSEK, M.; INGELI, R. Thermal performance effect of hollow ceramic micro-spheres coating assessed by dynamic outdoor testing in the summer season. In 2nd Central European Symposium on Building Physics. RSA, Vienna, Austria. Vídeň, Rakousko: RSA, Vienna, Austria, 2013. p. 149-156. ISBN: 978-3-85437-321-6.
Detail

FEDORKOVÁ, A.; ORIŇÁKOVÁ, R.; SEDLAŘÍKOVÁ, M.; GÓMEZ-ROMERO, P. Lítium-síra-LiFePO4 nanokompozitný katódový materiál pre Li/S batérie. ChemZi. 2013. s. 75-75. ISSN: 1336-7242.
Detail

BRUMMER, V.; JECHA, D.; SKRYJA, P.; LEŠTINSKÝ, P. Design of multifunctional pilot unit for waste gases pollutants reduction. MCS-8 Eighth mediterranean combustion symposium Book of Abstracts. 2013. p. PFC-1 1 (PFC-1 11 p.)
Detail

POLZER, S.; GASSER, T.; BURŠA, J.; STAFFA, R.; VLACHOVSKÝ, J.; MAN, V.; SKÁCEL, P. Importance of material model in wall stress prediction in abdominal aortic aneurysms. MEDICAL ENGINEERING & PHYSICS, 2013, vol. 35, no. 4, p. 1282-1289. ISSN: 1350-4533.
Detail

MAJER, Z.; NÁHLÍK, L. Influence of Interphase Imperfection on Micro-Crack Behavior in Polymer Composites Filled by Rigid Particles. In Local Mechanical Properties IX. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 194-197. ISBN: 978-3-03785-876-9. ISSN: 1013-9826.
Detail

POLZER, S.; BURŠA, J.; GASSER, T.; STAFFA, R.; VLACHOVSKÝ, R. A numerical implementation to predict residual strains from the homogeneous stress hypothesis with application to abdominal aortic aneurysms. ANNALS OF BIOMEDICAL ENGINEERING, 2013, vol. 41, no. 7, p. 1516-1527. ISSN: 0090-6964.
Detail

POLZER, S.; GASSER, T.; FORSELL, C.; DRUCKMÜLLEROVÁ, H.; TICHÝ, M.; STAFFA, R.; VLACHOVSKÝ, R.; BURŠA, J. Automatic Identification and Validation of Planar Collagen Organization in the Aorta Wall with Application to Abdominal Aortic Aneurysm. MICROSCOPY AND MICROANALYSIS, 2013, vol. 19, no. 6, p. 1395-1404. ISSN: 1431-9276.
Detail

JECHA, D.; MARTINEC, J.; BRUMMER, V.; STEHLÍK, P.; LEŠTINSKÝ, P. Modernization of Unit for Elimination of VOCs by Catalytic Oxidation. Chemical Engineering Transactions, 2013, vol. 35, no. 2013, p. 745-750. ISSN: 1974-9791.
Detail

ČEKON, M.; KALOUSEK, M.; HRAŠKA, J. Verification of MZELWE moule in ESP-r programme with experimental confrontation. In Research and Applications in Structural Engineering, Mechanics and Computation. CRC Press, Taylor&Francis Group. Cape Town, JAR: CRC Press, Balkema, Taylor&Francis Group, 2013. p. 1813-1818. ISBN: 978-1-315-85078-8.
Detail

VONDÁL, J.; HÁJEK, J. Heat Flux Measurement Methods for Process Furnaces – a Case Study. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 1153-1158. ISSN: 1974-9791.
Detail

VONDÁL, J.; HÁJEK, J. Comparison of SAS Turbulence Model to the SST k-omega in Non-Premixed Combustion Simulation. Proceedings of 14th European Turbulence Conference. Lyon, Francie: 2013. p. 1-2.
Detail

JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P.; SKRYJA, P. Návrh multifunkční poloprovozní jednotky pro snižování polutantů z odpadního plynu. In CHISA 2013 - plné texty příspěvků. 1. Srní: ČSCHI, 2013. s. B 4.3 (B 4.5 s.)ISBN: 978-80-02-02500-9.
Detail

FRÝBA, L.; BÉBAR, L.; TOUŠ, M. Evaluation of Sewage Sludge Co-incineration in the Existing Heating Plant or Power Plant from Emission Production Point of View. Chemical Engineering Transactions, 2013, vol. 2013, no. 35, p. 823-828. ISSN: 1974-9791.
Detail

TOUŠ, M.; FRÝBA, L.; PAVLAS, M. Improving Calculation of Lower Heating Value of Waste by Data Reconciliation – Analysis and Evaluation. Chemical Engineering Transactions, 2013, vol. 2013, no. 35, p. 877-882. ISSN: 1974-9791.
Detail

PÍŠKA, M.; SEDLÁK, J.; PEKÁRKOVÁ, E. New Technologies for Individual Joint Implants. In Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies, NEWTECH 2013. Stockholm, Sweden: Universitetsservice US AB, 2013. p. 263-272. ISBN: 978-91-7501-893-5.
Detail

KLOC, P.; MAZÁNKOVÁ, V.; ELIÁŠ, M.; TRUNEC, D.; ZAJÍCKOVÁ, L. Investigation of barrier discharge in argon with acetylene and methane admixture and heated electrode. XXXI International Conference of Phenomena in Ionized Gases. Granada: 2013. p. PS3-060 (PS3-063 p.)ISBN: N.
Detail

PLÁŠEK, J.; ŠIKULA, O. Numerická simulace rozložení střední radiační teploty v hale provozního ošetření vozů metra, vytápěné sálavými panely. Vytápění, větrání, instalace, 2013, roč. 2013, č. 5, s. 230-232. ISSN: 1210-1389.
Detail

ROUPEC, J.; KUBÍK, M.; MAZŮREK, I.; STRECKER, Z. Problems of FEM Analysis of Magnetic Circuit. In Mechatronics 2013 - Recent Technological and Scientific Advances. London: Springer, 2013. p. 299-305. ISBN: 978-3-319-02294-9.
Detail

ŠOBROVÁ, P.; VACULOVIČOVÁ, M.; PEKAŘÍK, V.; HUBÁLEK, J.; ADAM, V.; KIZEK, R. Femtogram electrochemical sensing of prion proteins using quantum dots. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2013, vol. 8, no. 12, p. 12466-12475. ISSN: 1452-3981.
Detail

ŠKRIPKOVÁ, L. Capillary transfer coefficient of polynomial type in the diffusion equation. In 11th International Conference of Numerical Analysis and Applied Mathematics 2013, AIP Conference Proceedings 1558. AIP conference proceedings. Melville, New York: American Institute of Physics, 2013. p. 1008-1011. ISBN: 978-0-7354-1184-5. ISSN: 0094-243X.
Detail

ŠOBROVÁ, P.; VACULOVIČOVÁ, M.; HUBÁLEK, J.; ADAM, V.; KIZEK, R. Voltammetry as a Tool for Characterization of CdTe Quantum Dots. International Journal of Molecular Sciences, 2013, vol. 14, no. 7, p. 13497-13510. ISSN: 1422-0067.
Detail

JANŮ, L.; STANISAVLJEVIC, M.; KŘÍŽKOVÁ, S.; ŠOBROVÁ, P.; VACULOVIČOVÁ, M.; KIZEK, R.; ADAM, V. Electrophoretic study of peptide-mediated quantum dot-human immunoglobulin bioconjugation. Electrophoresis, 2013, vol. 34, no. 18, p. 2725-2732. ISSN: 0173-0835.
Detail

ŠIKULA, O.; MOHELNÍKOVÁ, J.; PLÁŠEK, J. Thermal CFD Analysis of Tubular Light Guides. ENERGIES, 2013, vol. 6, no. 12, p. 6304-6321. ISSN: 1996-1073.
Detail

REBENDA, J.; ŠMARDA, Z. Comparison of differential transformation method with Adomian decomposition method for functional differential equations with proportional delays. In 11th International Conference on Numerical Analysis and Applied Mathematics: ICNAAM 2013. AIP conference proceedings. 2013. p. 1190-1193. ISBN: 978-0-7354-1184-5. ISSN: 0094-243X.
Detail

DOBAI, R.; SEKANINA, L. Towards Evolvable Systems Based on the Xilinx Zynq Platform. 2013 IEEE International Conference on Evolvable Systems (ICES). Proceedings of the 2013 IEEE Symposium Series on Computational Intelligence (SSCI). Singapur: IEEE Computational Intelligence Society, 2013. p. 89-95. ISBN: 978-1-4673-5869-9.
Detail

DOBAI, R.; SEKANINA, L. Image Filter Evolution on the Xilinx Zynq Platform. Proceedings of the 2013 NASA/ESA Conference on Adaptive Hardware and Systems. Torino: IEEE Circuits and Systems Society, 2013. p. 164-171. ISBN: 978-1-4673-6381-5.
Detail

ZACHARIÁŠOVÁ, M.; PŘIKRYL, Z.; HRUŠKA, T.; KOTÁSEK, Z. Automated Functional Verification of Application Specific Instruction-set Processors. IFIP Advances in Information and Communication Technology, 2013, vol. 4, no. 403, p. 128-138. ISSN: 1868-4238.
Detail

DIBLÍK, J.; REBENDA, J.; ŠMARDA, Z. Singular Initial Value Problem for Certain Classes of Systems of Ordinary Differential Equations. Abstract and Applied Analysis, 2013, vol. 2013, no. 1, p. 1-12. ISSN: 1085-3375.
Detail

DIBLÍK, J.; VÍTOVEC, J. Lower and upper estimates of solutions to systems of delay dynamic equations on time scales. Boundary Value Problems, 2013, vol. 2013, no. 1, p. 1-14. ISSN: 1687-2770.
Detail

LEŠTINSKÝ, P.; BRUMMER, V.; JECHA, D.; SKRYJA, P.; STEHLÍK, P. Design of catalytic oxidation unit for elimination of VOC and CO. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2014, vol. 53, no. 2, p. 732-737. ISSN: 0888-5885.
Detail

LÍZAL, F.; ELCNER, J.; JEDELSKÝ, J.; JÍCHA, M. Investigation of Flow in a Model of Human Airways using Constant Temperature Anemometry and Numerical Simulation. In Recent Advances in Fluid Mechanics and Heat & Mass Transfer. Vouliagmeni, Athens, Greece: WSEAS Press, 2013. p. 35-40. ISBN: 978-1-61804-183-8.
Detail

LÍZAL, F.; JEDELSKÝ, J.; ADAM, J.; BĚLKA, M.; JÍCHA, M. Aerosol Deposition Measurement in the Model of Human Lungs using Positron Emission Tomography. Prague, Czech Republic: European Aerosol Assembly, 2013. p. 1 (1 s.).
Detail

ŠÍMA, J.; ŠIKULA, O.; KOŠÚTOVÁ, K.; PLÁŠEK, J. Theoretical evaluation of night sky cooling in the Czech Republic. In 2nd International Conference on Solar Heating and Cooling for Buildings and Industry (SHC 2013). Proceedings of a meeting held 23-25 September 2013, Freiburg, Germany. Energy Procedia. Amsterdam: Elsevier, 2014. p. 645-653. ISBN: 9781632663665. ISSN: 1876-6102.
Detail

DRONGOVÁ, K.; SOBOTKOVÁ, V. Projevy vodní eroze v drahách soustředěného povrchového odtoku. Littera Scripta, 2013, roč. 6, č. 2, s. 183-193. ISSN: 1805-9112.
Detail

SEDLÁK, J.; CHLADIL, J.; NOVÁK, L. Návrh technologie výroby zadané součásti v podmínkách dílny ÚST FSI VUT v Brně. Strojírenská technologie, 2013, roč. XVIII, č. 2, s. 97-105. ISSN: 1211-4162.
Detail

ORAVEC, P. Conversion of a rural building in Beskydy after 90 years of use. In Proceedings of the International Scientifical Conference, enviBUILD – Buildings and Environment 2013. first. Bratislava: STU – Nakladateľstvo STU, 2013. s. 279-282. ISBN: 978-80-227-4070-8.
Detail

INGELI, R.; VAVROVIČ, B.; ČEKON, M. Thermal bridges minimizing through typical details in low energy designing. In International conference proceedings enviBUILD 13. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 62-65. ISBN: 978-3-03835-040-8. ISSN: 1022-6680.
Detail

INGELI, R.; VAVROVIČ, B.; ČEKON, M.; PAULOVIČOVÁ, L. Thermal bridges minimizing through window jamb in low energy buildings. In International conference proceedings enviBUILD 13. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 66-69. ISBN: 978-3-03835-040-8. ISSN: 1022-6680.
Detail

ORAVEC, P. Windows in buildings - diagnostics of selected properties after time of using. In enviBUILD 2013. Advanced Materials Research (online). Switzerland: Trans Tech Publications, 2014. p. 184-187. ISBN: 978-3-03835-040-8. ISSN: 1662-8985.
Detail

NOVÁKOVÁ, Z.; ORIŇÁKOVÁ, R.; ORIŇÁK, A.; HVIZDOŠ, P.; STRAKOVÁ FEDORKOVÁ, A. Elimination Voltammetry as a New Method for Studying the SAM Formation. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2014, vol. 9, no. 7, p. 3846-3863. ISSN: 1452-3981.
Detail

MAJER, Z.; HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L. Particulate Composite Damage: Numerical Estimation of Micro-Crack Paths. In Local Mechanical Properties X. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 261-264. ISBN: 978-3-03835-062-0. ISSN: 1013-9826.
Detail

HUSÁR, A.; PŘIKRYL, Z.; DOLÍHAL, L.; MASAŘÍK, K.; HRUŠKA, T. ASIP Design with Automatic C/C++ Compiler Generation. Haifa: 2013. p. 0-0.
Detail

SLÁVIK, R.; ČEKON, M.; KALOUSEK, M. Predikcia miery vplyvu tepelno-izolačných vlastností na vývoj teploty horného plášťa. In PORUCHY A OBNOVA OBALOVÝCH KONŠTRUKCIÍ BUDOV zborník z konferencie s medzinárodnou účasťou. 1. Košice: Technická univerzita v Košiciach, 2014. s. 129-134. ISBN: 978-80-553-1678-9.
Detail

ORAVEC, P.; PARTIKA, R.; KALOUSEK, M. Poznatky z návrhu a realizace obnovy domu. Zborník z konferencie s medzinárodnou účasťou PORUCHY A OBNOVA OBALOVÝCH KONŠTRUKCIÍ BUDOV. Košice: 2014. s. 58-61. ISBN: 978-80-553-1678-9.
Detail

PARTIKA, R.; ORAVEC, P. Problematika napojování stěn na šikmou střechu s tepelnou izolací nad krokvemi. Zborník z konferencie s medzinárodnou účasťou PORUCHY A OBNOVA OBALOVÝCH KONŠTRUKCIÍ BUDOV. Košice: 2014. s. 62-65. ISBN: 978-80-553-1678-9.
Detail

HRUBÁ, B.; ORAVEC, P.; VLČEK, P. Vzduchotěsnost obvodového pláště pasivního domu. Zborník z konferencie s medzinárodnou účasťou PORUCHY A OBNOVA OBALOVÝCH KONŠTRUKCIÍ BUDOV. Košice: 2014. s. 234-239. ISBN: 978-80-553-1678-9.
Detail

ŠOTNER, R.; JEŘÁBEK, J.; HERENCSÁR, N.; PROKOP, R.; VRBA, K.; DOSTÁL, T. Resistor-less First-Order Filter Design with Electronical Reconfiguration of its Transfer Function. In Proceedings of the 24th International Conference Radioelektronika 2014. Bratislava, Slovakia: 2014. p. 63-66. ISBN: 978-1-4799-3715-8.
Detail

ČEKON, M.; KALOUSEK, M.; HRAŠKA, J.; INGELI, R. Spectral optical properties and thermodynamic performance of reflective coatings in a mild climate zone. ENERGY AND BUILDINGS, 2014, vol. 77, no. C, p. 343-354. ISSN: 0378-7788.
Detail

MARTON, D.; STARÝ, M.; MENŠÍK, P. Water management solution of reservoir storage function under Water management solution of reservoir storage function under condition of measurement uncertainties in hydrological input data. In 12TH INTERNATIONAL CONFERENCE ON COMPUTING AND CONTROL FOR THE WATER INDUSTRY, CCWI2013. Procedia Engineering. Procedia Engineering. Amsterdam: Elsevier Science Publishers, 2014. p. 1094-1101. ISSN: 1877-7058.
Detail

JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P.; MARTINEC, J.; STEHLÍK, P. Effective abatement of VOC and CO from acrylic acid and related production waste gas by catalytic oxidation. Clean Technologies and Environmental Policy, 2014, vol. 16, no. 7, p. 1329-1338. ISSN: 1618-954X.
Detail

SEDLÁK, J.; SEKERKA, V.; SLANÝ, M.; KOUŘIL, K.; ZEMČÍK, O.; CHLADIL, J. Production of prototype parts using Direct Metal Laser Sintering technology. In ERIN 2014, 8th International Conference for Young Researchers and Ph.D. Students; Proceedings of Abstracts. Litera Brno: Brno University of Technology, 2014. p. 1-13. ISBN: 978-80-214-4931-2.
Detail

ORAVEC, P.; FIŠAROVÁ, Z.; VLČEK, P. Diagnostika kročejového zvuku stropních konstrukcí v bytovém domě. Stavební fyzika v pozemním stavitelství: Teorie a praxe. Brno: 2014. s. 75-78. ISBN: 978-80-214-4926-8.
Detail

DIBLÍK, J.; VÍTOVEC, J. Asymptotic behavior of solutions of systems of dynamic equations on time scales in a set whose boundary is a combination of strict egress and strict ingress points. APPLIED MATHEMATICS AND COMPUTATION, 2014, vol. 238, no. 6, p. 289-299. ISSN: 0096-3003.
Detail

BOHÁČ, M.; PALOU, M.; NOVOTNÝ, R.; MÁSILKO, J.; VŠIANSKÝ, D.; STANĚK, T. Investigation on early hydration of ternary Portland cement-blast-furnace slag-metakaolin blends. Construction and building materials, 2014, vol. 2014, no. 64, p. 333-341. ISSN: 0950-0618.
Detail

ORIŇÁKOVÁ, R.; ORIŇÁK, A.; KUPKOVÁ, M.; SABALOVÁ, M.; STRAKOVÁ FEDORKOVÁ, A.; KABÁTOVÁ, M.; KAĽAVSKÝ, F.; SEDLAŘÍKOVÁ, M. Effect of Heat Treatment on the Corrosion and Mechanical Properties of Electrolytical Composite Ni-B Coatings. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2014, vol. 9, no. 8, p. 4268-4286. ISSN: 1452-3981.
Detail

ROY, S.; PROVAZNÍK, I. In-silico characterization of human metallothionein (MT-1E) and its role in prevention and therapy of bladder cancer with dietary agents. In 2014 IEEE 27th International Symposium on Computer-Based Medical Systems. New York: IEEE, 2014. p. 469-470. ISBN: 978-1-4799-4435-4.
Detail

ŠOTNER, R.; HERENCSÁR, N.; JEŘÁBEK, J.; PROKOP, R.; KARTCI, A.; DOSTÁL, T.; VRBA, K. Z-Copy Controlled-Gain Voltage Differencing Current Conveyor: Advanced Possibilities in Direct Electronic Control of First-Order Filter. Elektronika Ir Elektrotechnika, 2014, vol. 20, no. 6, p. 77-83. ISSN: 1392-1215.
Detail

TOUŠ, M.; MÁŠA, V.; PAVLAS, M.; AVRAMOV, V. Improving the enegy management of a building complex through utility system modelling. In 24th European Symposium on Computer Aided Process Engineering (ESCAPE). Computer Aided Chemical Engineering. Netherlands: Elsevier, 2014. p. 445-450. ISBN: 978-0-444-63443-6. ISSN: 1570-7946.
Detail

HÁJEK, J.; JEGLA, Z.; VONDÁL, J. CFD analysis of tube circumference heat flux variation in radiant section of fired heater. In Third International Conference on Computational Methods for Thermal Problems. ThermaComp proceedings. Napoli, Italy: Giannini Editore, 2014. p. 237-240. ISBN: 978-88-7431-727-1. ISSN: 2305-5995.
Detail

HÁJEK, J.; JEGLA, Z.; VONDÁL, J. Numerical Analysis of Radiant Section of Fired Heater Focused on the Effect of Wall-Tube Distance. In 24th European Symposium on Computer Aided Process Engineering (ESCAPE). Computer Aided Chemical Engineering. Netherlands: Elsevier, 2014. p. 331-336. ISBN: 978-963-9970-48-9. ISSN: 1570-7946.
Detail

MENŠÍK, P.; STARÝ, M.; MARTON, D. Using Predictive Models of Mean Monthly Flows for Operative Outflows Control from Large Open Reservoirs. In Proceedings ITISE 2014, International work-conference on Time Series. Spain, Granada: Copicentro Granada S.L, 2014. p. 382-395. ISBN: 978-84-15814-97-9.
Detail

STRAKOVÁ FEDORKOVÁ, A.; ORIŇÁKOVÁ, R.; SLÁVIK, M.; SEDLAŘÍKOVÁ, M. Corrosion in Li-S batteries based on conversion reaction. Corrosion in power industry 2014. 2014. p. 14-14. ISBN: 978-80-553-1715-1.
Detail

STRAKOVÁ FEDORKOVÁ, A.; ČECH, O.; KAZDA, T.; ORIŇÁKOVÁ, R.; SEDLAŘÍKOVÁ, M. High performance sulfur nanocomposites as cathode materials based on conversion reaction. In XIV. Pracovní setkání fyzikálních chemikú a elektrochemikú. 2014. p. 36-39. ISBN: 978-80-210-6842-1.
Detail

ŠOTNER, R.; JEŘÁBEK, J.; HERENCSÁR, N.; HORNG, J.; VRBA, K. Electronically Linearly Voltage Controlled Second-Order Harmonic Oscillator With Multiples of pi/4 Phase Shifts. In Proceedings of the 38th International Conference on Telecommunication and Signal Processing. Berlin, Germany: 2014. p. 708-712. ISBN: 978-1-4799-8497-8.
Detail

ŠOTNER, R.; JEŘÁBEK, J.; HERENCSÁR, N.; PETRŽELA, J.; VRBA, K.; KINCL, Z. Linearly Tunable Quadrature Oscillator Derived from LC Colpitts Structure Using Voltage Differencing Transconductance Amplifier and Adjustable Current Amplifier. ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING, 2014, vol. 81, no. 1, p. 121-136. ISSN: 0925-1030.
Detail

MIKULKA, J. Parallelized Calculation of the T2 Relaxation Time in MRI. In 37th International Conference on Telecommunications and Signal Processing (TSP). 2015. p. 725-728. ISBN: 978-80-214-4983-1.
Detail

VONDÁL, J.; HÁJEK, J.; JEGLA, Z. Počítačové modelování tepelných toků v pecích procesního průmyslu. In Sborník ANSYS 2014 Setkání uživatelů a konference. 1. Dolní Morava, ČR: 2014. s. 1-17. ISBN: 978-80-905040-9-7.
Detail

VONDÁL, J.; VAN DER STEEN, M.; TUMMERS, M. Tracking of Impiging Jet Flame. In ENGINEERING MECHANICS 2014. Engineering Mechanics .... 2014. p. 692-695. ISBN: 978-80-214-4871-1. ISSN: 1805-8248.
Detail

VÍTOVEC, J. Critical oscillation constant for Euler-type dynamic equations on time scales. APPLIED MATHEMATICS AND COMPUTATION, 2014, vol. 243, no. 7, p. 838-848. ISSN: 0096-3003.
Detail

ORAVEC, P. Typical renovation measures of brick houses from 1970 - 1990. In International Multidisciplinary Scientific Geoconferences. 2014. p. 27-32. ISBN: 978-619-7105-12-4.
Detail

ORAVEC, P. Analysis of a family house on the basis of wood after 35 years of use. In International Multidisciplinary Scientific Geoconferences. 2014. p. 417-422. ISBN: 978-619-7105-12-4.
Detail

ORAVEC, P.; HRUBÁ, B.; LABUDEK, J. Diagnostics and optimalization of airtightness in experimental wooden structures. In 6th International Conference on Contemporary Problems of Architecture and Construction. 2014. s. xx (xx s.)ISBN: 978-80-248-3147-3.
Detail

WINKLER, J.; KUBEČKOVÁ, D.; ZDRAŽILOVÁ, N.; ORAVEC, P. Influence of Electrical Power Lines on Acoustic Properties of Partition Constructions. In 6th International Conference on Contemporary Problems of Architecture and Construction. 2014. s. xx (xx s.)ISBN: 978-80-248-3147-3.
Detail

STRAKOVÁ FEDORKOVÁ, A. Nová generace lithiových baterií s konverzní katodou. Energetika, 2014, roč. 2014, č. 2, s. 115-116. ISSN: 0375-8842.
Detail

TKACHENKO, S.; NEČAS, D.; DATSKEVICH, O.; ČUPERA, J.; SPOTZ, Z.; VRBKA, M.; KULAK, L.; FORET, R. Tribological behavior of Ti–Si based in situ composites under sliding. In Metal 2014. Ostrava: Tanger Ltd., 2014. p. 2704-2709. ISBN: 978-80-87294-52-9.
Detail

UPADHYAY, H.; DWIVEDI, G.; ROY, S.; SHARMA, A.; DAROKAR, M.; SRIVASTAVA, S. Phytol Derivatives as Drug Resistance Reversal Agents. ChemMedChem, 2014, vol. 9, no. 8, p. 1860-1868. ISSN: 1860-7187.
Detail

KLOC, P.; AUBRECHT, V.; COUFAL, O.; BARTLOVÁ, M. Influence of Copper Vapours on the Radiative Transfer in Thermal Air Plasma. In Proceedings of the XXth International Conference on Gas Discharges and Their Applications. Orléans: GREMI UMR 7344, 2014. p. 139-142. ISBN: 978-2-9548207-2-9.
Detail

MAJER, Z.; PLETZ, M.; KRAUTGASSER, C.; NÁHLÍK, L.; HUTAŘ, P.; BERMEJO, R. Numerical Analysis of Sub-Critical Crack Growth in Particulate Ceramic Composites. Procedia Materials Science, 2014, vol. 3, no. 1, p. 2071-2076. ISSN: 2211-8128.
Detail

FRÝBA, L.; BÉBAR, L.; TOUŠ, M. Analysis of Requirement for Sewage Sludge Incineration. In Proceedings of the 17th CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION PRES 2014. Chemical Engineering Transactions. Milano, Italy: AIDIC Servizi S.r.l., 2014. p. 631-636. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

MAJER, Z.; ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P. Point load effect determination for different pressure pipe SDR series. In Advances in Fracture and Damage Mechanics XIII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2015. p. 373-376. ISBN: 978-3-03835-235-8. ISSN: 1013-9826.
Detail

TOUŠ, M.; PAVLAS, M.; STEHLÍK, P. Waste-to-energy plant operation planning based on stochastic simulation. In Proceedings of the 17th CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION PRES 2014. 2014. p. 673-678. ISBN: 978-88-95608-30-3.
Detail

SEDLÁK, J. Aplikace aditivní technologie pro výrobu prototypových modelů totální endoprotézy kolenního kloubu. In Sborník příspěvků Mezinárodní konference výrobních technologií při příležitosti 50. výročí založení Katedry obrábění a montáže Fakulty strojní VŠB-TU. Ostrava, 2014, 1. vydání: VŠB - TU Ostrava, Fakulta strojní, 2014. s. 1-10. ISBN: 978-80-248-3518-1.
Detail

MACKŮ, R.; ŠICNER, J.; KOKTAVÝ, P.; TRČKA, T. Fracture related electromagnetic emission measurement and excess noise analysis of reinforced composites. Procedia Materials Science, 2014, vol. 2014, no. 3, p. 116-121. ISSN: 2211-8128.
Detail

KLOC, P.; AUBRECHT, V.; BARTLOVÁ, M. Scaling of the Net Emission Coefficients. In Contributed Papers & Abstracts of Invited Lectures,Topical Invited Lectures, Progress Reports and Workshop Lectures. Belgrade: Institute of Physics, 2014. p. 375-379. ISBN: 978-86-7762-600-6.
Detail

BOHÁČ, M.; STANĚK, T.; URBÁNEK, P. Testing of surface photoactivity of fibre-cement composites. In Ecology and New Building Materials and Products. Advanced Materials Research. 2014. p. 35-38. ISSN: 1022-6680.
Detail

BOHÁČ, M.; OPRAVIL, T.; BARTONÍČKOVÁ, E.; FRAJKOROVÁ, F.; PALOU, M. The role of metakaolin fineness on rheological properties of cement pastes. In Ecology and New Building Materials and Products. Advanced Materials Research. 2014. p. 39-42. ISSN: 1022-6680.
Detail

IFKA, T.; PALOU, M.; KULIFFAYOVÁ, M.; BOHÁČ, M.; FRAJKOROVÁ, F.; BÁGEĽ, Ľ. Pore structure analysis of Portland cement and blended Portland cements cured under hydrothermal conditions cements cured under hydrothermal conditions. In Ecology and New Building Materials and Products. Advanced Materials Research. 2014. p. 235-238. ISSN: 1022-6680.
Detail

MIKULKA, J.; DVOŘÁK, P. Fast Calculation of T2 Relaxation Time in Magnetic Resonance Imaging. In Proceedings of PIERS 2014 in Guangzhou. Progress In Electromagnetics. Guangzhou, Čína: 2014. p. 2331-2335. ISBN: 978-1-934142-28-8. ISSN: 1559-9450.
Detail

MIKULKA, J. Multiparametric Biological Tissue Analysis: A Survey of Image Processing Tools. In Proceedings of PIERS 2014 in Guangzhou. Progress In Electromagnetics. Guangzhou, Čína: 2014. p. 1861-1864. ISBN: 978-1-934142-28-8. ISSN: 1559-9450.
Detail

MIKULKA, J. Matlab Extension for 3DSlicer: A Robust MR Image Processing Tool. In Proceedings of PIERS 2014 in Guangzhou. Progress In Electromagnetics. Guangzhou, Čína: 2014. p. 1857-1860. ISBN: 978-1-934142-28-8. ISSN: 1559-9450.
Detail

SEDLÁK, J.; MUZIKANT, D.; VALÁŠEK, P. Výroba optických zrcadel pro vysokofrekvenční antény. Kovárenství, 2014, roč. 2014, č. 50, s. 73-76. ISSN: 1213-9289.
Detail

ŠIKULA, O.; MOHELNÍKOVÁ, J.; PLÁŠEK, J. Thermal Analysis of Light Pipes for Insulated Flat Roofs. ENERGY AND BUILDINGS, 2014, vol. 2014, no. 85, p. 436-444. ISSN: 0378-7788.
Detail

LEŠTINSKÝ, P.; STEHLÍK, P.; NAVRÁTIL, P.; VEČEŘ, M. Removing CO2 from biogas – the optimization of a PSA (pressure swing adsorption) unit using breakthrough curves. In Chemical Engineering Transaction. Chemical Engineering Transactions. Itálie: AIDIC Servizi S.r.l., 2014. p. 265-270. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

LEŠTINSKÝ, P.; VEČEŘ, M. Effect of the draft tube on mixing in the reactor with internal circulation loop – CFD simulation. In 21st International Congress of Chemical and Process Engineering CHISA 2014 and 17th Conference PRES 2014, Authors of papers. Praha: 2014. p. 1-9. ISBN: 978-80-02-02555-9.
Detail

ČEKON, M.; INGELI, R. Spectral emissivity of roof membranes and vapor barriers. In Contemporary Problems in Architecture and Construction. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 21-24. ISBN: 978-3-03835-237-2. ISSN: 1022-6680.
Detail

PLÁŠEK, J.; ŠIKULA, O. Transient Numerical Simulation of Linear Thermal Transmittance in Software CalA. In Envibuild 2014. Advanced Materials Research. 2014. Switzerland: Trans Tech Publications, 2014. p. 281-284. ISBN: 978-3-03835-280-8. ISSN: 1022-6680.
Detail

ORAVEC, P.; HRUBÁ, B.; PEŘINA, Z. The Windows in the Modular Structure - Air Tightness and Quality of Installation Diagnostics. In enviBUILD 2014 - Buildings and Environment, International Conference proceedings. 2014. s. 191-194. ISBN: 978-80-214-5003-5.
Detail

CHOUDHURY, D.; CHING, H.A.; MAMAT, A.B.; ČÍŽEK, J.; ABU OSMAN, N.A.; VRBKA, M.; HARTL, M.; KŘUPKA, I. Fabrication and characterization of DLC coated microdimples on hip prosthesis heads. Journal of biomedical materials research. Part B, Applied biomaterials (Print), 2015, vol. 103, no. 5, p. 1002-1012. ISSN: 1552-4973.
Detail

INGELI, R.; MINAROVIČOVÁ, K.; ČEKON, M. Architectural elements with respect to the energy performance of buildings. In Contemporary Problems in Architecture and Construction. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 561-565. ISBN: 978-3-03835-237-2. ISSN: 1022-6680.
Detail

ČERMÁK, J.; KISELA, T. Exact and discretized stability of the Bagley-Torvik equation. Journal of Computational and Applied Mathematics, 2014, vol. 269, no. 10, p. 53-67. ISSN: 0377-0427.
Detail

BUDAY, P.; INGELI, R.; ČEKON, M. Advanced Thermal Performance Analysis of Thermal Break Element Applied in Balcony Slab. In enviBUILD 2014. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 171-174. ISBN: 978-3-03835-280-8. ISSN: 1022-6680.
Detail

SLÁVIK, R.; ČEKON, M. Hygrothermal Loads of Building Components in Bathroom of Dwellings. In enviBUILD 2014. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 273-276. ISBN: 978-3-03835-280-8. ISSN: 1022-6680.
Detail

FINTOVÁ, S.; KUNZ, L. Cyclic plastic behavior and fatigue life of AZ91 alloy in as-cast and ultrafine-grained state. Materiálové inžinierstvo, 2014, vol. 21, no. 3, p. 109-115. ISSN: 1335-0803.
Detail

VONDÁL, J.; HÁJEK, J. Numerical Flow Field Prediction Downstream of Axial Guide Vane Swirl Generator. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: AIDIC Servizi S.r.l., 2014. p. 907-912. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

ZIMMERMANN, T.; STRAUSS, A.; LEHKÝ, D.; NOVÁK, D.; KERŠNER, Z. Stochastic fracture-mechanical characteristics of concrete based on experiments and inverse analysis. Construction and building materials, 2014, vol. 2014, no. 73, p. 535-543. ISSN: 0950-0618.
Detail

ROY, S.; KUMAR, A.; PROVAZNÍK, I. Virtual screening, ADMET profiling, molecular docking and dynamics approaches to search for potent selective natural molecule based inhibitors against metallothionein-III to study Alzheimer's disease. In Proceedings IEEE International Conference on Bioinformatics and Biomedicine (BIBM). Belfast, United Kingdom: IEEE, 2014. p. 352-356. ISBN: 978-1-4799-5669-2.
Detail

EKSIOGLU, Y.; PETRÁČEK, J. Self-Pulsing and Chaos in Kerr-Nonlinear Coupled Ring Resonators. In Proc. 16th Int. Conference on Transparent Optical Networks ICTON 2014. International Conference on Transparent Optical Networks. 2014. p. Mo.D6.5-1 (Mo.D6.5-4 p.)ISBN: 978-1-4799-5601-2. ISSN: 2162-7339.
Detail

BROUKAL, J.; HÁJEK, J.; VONDÁL, J. An experimental study of effervescent sprays: axial evolution of mean drop diameter. In 26th European Conference on Liquid Atomization & Spray Systems. Bremen, Germany: 2014. p. 1-6. ISBN: 978-3-88722-744-9.
Detail

Khan S., Verma V., Verma S., POLZER S. and Jha S. Assessing the potential risk of rupture of abdominal aortic aneurysms. CLINICAL RADIOLOGY, 2015, vol. 70, no. 1, p. 11-20. ISSN: 0009-9260.
Detail

ČEKON, M. Thermal performance analyzing of hollow microspheres coatings for building energy efficiency. Book of Abstracts CEITEC Annual Conference “Frontiers in Material and Life Sciences”. first. Brno: Published by Masaryk University, Brno, 2014. p. 107-107. ISBN: 978-80-210-7159.
Detail

MENŠÍK, P.; MARTON, D. Software pro automatizované řešení zásobní funkce vodohospodářské soustavy. In Zborník príspevkov z 13. konferencia mladých vodohospodárov. Bratislava: Slovenský hydrometeorologický ústav, 2014. s. 1-9. ISBN: 978-80-88907-87-9.
Detail

ŠOTNER, R.; JEŘÁBEK, J.; PETRŽELA, J.; HERENCSÁR, N.; PROKOP, R.; VRBA, K. Second-order Simple Multiphase Oscillator Using Z-Copy Controlled-Gain Voltage Differencing Current Conveyor. Elektronika Ir Elektrotechnika, 2014, vol. 20, no. 9, p. 13-18. ISSN: 1392-1215.
Detail

BUDAY, P.; INGELI, R.; ČEKON, M. Influence of Thermal Break Element Applied in Balcony Slab on Internal Surface Temperature. Advanced Materials Research, 2014, vol. 1057, no. II, p. 79-86. ISSN: 1022-6680.
Detail

LEŠTINSKÝ, P.; JECHA, D.; BRUMMER, V.; BÉBAR, L.; STEHLÍK, P. Removal of SO2 from flue gases using a new design of a Venturi scrubber. 2014.
Detail

KUNZ, L.; FINTOVÁ, S. Fatigue behaviour of AZ91 magnesium alloy in as-cast and severe plastic deformed conditions. In 11th International Fatigue Congress. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 397-402. ISBN: 978-3-03835-008-8. ISSN: 1022-6680.
Detail

FINTOVÁ, S.; KUNZ, L. Initiation of fatigue cracks in AZ91 Mg alloy processed by ECAP. In NANOMATERIALS BY SEVERE PLASTIC DEFORMATION. INTERNATIONAL CONFERENCE. 6TH 2014. (NanoSPD6) (2 PARTS). IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2014. p. 1-8. ISBN: 978-1-63439-874-9. ISSN: 1757-8981.
Detail

KUNZ, L.; FINTOVÁ, S. Initiation of Fatigue Cracks in Ultrafine-grained Materials in High-cycle Fatigue Region. Procedia Engineering, 2014, vol. 74, no. 1, p. 2-5. ISSN: 1877-7058.
Detail

ARZAGHI, M.; FINTOVÁ, S.; SARRAZIN-BAUDOUX, C.; KUNZ, L.; PETIT, J. Near threshold fatigue crack growth in ultrafinegrained copper. IOP Conference Series: Materials Science and Engineering, 2014, vol. 63, no. 1, p. 1-9. ISSN: 1757-8981.
Detail

ŠIMŮNKOVÁ, H.; KALINA, L.; SEDLÁČEK, J.; BOUŠEK, J.; MOZALEV, A. Electrolytic formation of tantalum nanotube arrays on the metal substrate through the alumina nanopores. Book of Abstracts of the Anodizing Science and Technology International Conference (AST) 2014. Sapporo, Japan: Anodizing Research Society, The Surface Finishing Society of Japan, 2014. p. 102-102.
Detail

ŠIMŮNKOVÁ, H.; KALINA, L.; BOUŠEK, J.; MOZALEV, A. Electrodeposition of Tantalum Coatings from TaF5 in ([BMP]Tf2N) Ionic Liquid and Their XPS Characterization. International Conference EUCHEM 2014 Tallinn. 2014. ISBN: 9789949430734.
Detail

ŠIMŮNKOVÁ, H.; KALINA, L.; BOUŠEK, J.; MOZALEV, A. Formation and electrical properties of tantalum nanotube arrays via electrodeposition from ionic liquid. Book of Abstracts, CEITEC Annual Conference 2014. Didot, spol. s.r.o., Trnkova 119, 628 00 Brno: Masaryk University, Brno, 2014. p. 225-225. ISBN: 978-80-210-7159-9.
Detail

ŠIMŮNKOVÁ, H.; KALINA, L.; BOUŠEK, J.; MOZALEV, A. Electrical properties of tantalum nanotube arrays prepared by electrodeposition from ionic liquid. Nanocon 2014, Conference Proceedings. Ostrava: TANGER Ltd., Ostrava, 2014. p. 106-106. ISBN: 978-80-87294-55-0.
Detail

STANISAVLJEVIC, M.; PEKÁRKOVÁ, J.; DOSTÁLOVÁ, S.; KŘÍŽKOVÁ, S.; VACULOVIČOVÁ, M.; ADAM, V.; KIZEK, R. Interactions between CdTe quantum dots and DNA revealed by capillary electrophoresis with laser-induced fluorescence detection. Electrophoresis, 2014, vol. 35, no. 18, p. 2587-2592. ISSN: 0173-0835.
Detail

LÍZAL, F.; TUHOVČÁK, J.; JÍCHA, M. Measurement of the airflow velocity upstream and downstream a wire mesh using constant temperature anemometry. In EPJ Web of Conferences. EPJ Web of Conferences. Francie: EDP Sciences, 2013. p. 1-4. ISBN: 978-80-260-5375-0. ISSN: 2100-014X.
Detail

FINTOVÁ, S.; KUNZ, L. Fatigue properties of magnesium alloy AZ91 processed by severe plastic deformation. Journal of the mechanical behavior of biomedical materials, 2015, vol. 42, no. 1, p. 219-228. ISSN: 1751-6161.
Detail

Antonio Guerrero, Martin Pfannmöller, Alexander Kovalenko, Teresa S. Ripolles, Hamed Heidari, Sara Bals, Louis-Dominique Kaufmann, Juan Bisquert, Germà Garcia-Belmonte. Nanoscale mapping by electron energy-loss spectroscopy reveals evolution of organic solar cell contact selectivity. ORGANIC ELECTRONICS, 2014, vol. 2015, no. 16, p. 227-233. ISSN: 1566-1199.
Detail

Alexander Kovalenko, Petr Ashcheulov, Antonio Guerrero, Patricie Heinrichová, Ladislav Fekete, Martin Vala, Martin Weiter, Irena Kratochvílová, and Germà Garcia Belmonte. Diamond-based electrodes for organic photovoltaic devices. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2015, vol. 2015, no. 134, p. 73-79. ISSN: 0927-0248.
Detail

ŠIMŠÍKOVÁ, M.; ČECHAL, J.; ZORKOVSKÁ, A.; ANTALÍK, M.; ŠIKOLA, T. Preparation of CuO/ZnO nanocomposite and its application as a cysteine / homocysteine colorimetric and fluorescence detector. Colloids and Surfaces B: Biointerfaces, 2014, vol. 123, no. 1, p. 951-958. ISSN: 0927-7765.
Detail

ČERMÁK, J.; KISELA, T. Introduction to Stability Theory of Linear Fractional Difference Equations. In Fractional Calculus: Theory. Mathematics Research Developments. 2014. p. 117-162. ISBN: 978-1-63463-002-3.
Detail

STANISAVLJEVIC, M.; VACULOVIČOVÁ, M.; KIZEK, R.; ADAM, V. Capillary electrophoresis of quantum dots: Minireview. Electrophoresis, 2014, vol. 35, no. 14, p. 1929-1937. ISSN: 0173-0835.
Detail

MENŠÍK, P.; STARÝ, M.; MARTON, D. Using Predictive Model of Mean Monthly Flows for Large Open Reservoirs Hydropower Control. In Procedia Engineering. Procedia Engineering. Amsterdam: Elsevier Science Publishers, 2014. p. 1486-1492. ISSN: 1877-7058.
Detail

SOBOTKOVÁ, V.; DUMBROVSKÝ, M. The new volumetric approach for field measurements of rill erosion. Abstract Book - 9th International Soil Science Congress on “The Soul of Soil and Civilization”. Samsun, Turkey: Pazar Mah, 2014. p. 243-243. ISBN: 979‐605‐63090-21.
Detail

SOBOTKOVÁ, V.; ŠARAPATKA, B.; DUMBROVSKÝ, M.; UHROVÁ, J.; BEDNÁŘ, M. The Influence of Conservation Measures, Limiting Soil Degradation, on the Quality of Surface Water Resources. World Academy of Science, Engineering and Technology, 2014, vol. 8, no. 10, p. 275-280. ISSN: 1307-6892.
Detail

DUMBROVSKÝ, M.; SOBOTKOVÁ, V.; ŠARAPATKA, B.; CHLUBNA, L.; VÁCHALOVÁ, R. Cost-effectiveness evaluation of model design variants of broad-base terrace in soil erosion control. ECOLOGICAL ENGINEERING, 2014, vol. 68, no. 2014, p. 260-269. ISSN: 0925-8574.
Detail

DUMBROVSKÝ, M.; SOBOTKOVÁ, V. The methods for field assessment of rill and ephemeral gully erosion in Czech Republic. Biogeochemical Processes at Air-Soil-Water Interfaces and Environmental Protection. Italy: 2014. p. 68-68.
Detail

ŠOTNER, R.; JEŘÁBEK, J.; HERENCSÁR, N.; DOSTÁL, T.; VRBA, K. Design of Z-copy controlled-gain voltage differencing current conveyor based adjustable functional generator. Microelectronics Journal, 2015, vol. 46, no. 2, p. 143-152. ISSN: 0026-2692.
Detail

MARTON, D.; KAPELAN, Z. Risk and Reliability Analysis of Open Reservoir Water Shortages Using Optimization. In 16th Water Distribution System Analysis Conference, WDSA2014 Urban Water Hydroinformatics and Strategic Planning. Procedia Engineering. Procedia Engineering. Amsterdam: Elsevier, 2014. p. 1478-1485. ISSN: 1877-7058.
Detail

DOBAI, R.; GLETTE, K.; TORRESEN, J.; SEKANINA, L. Evolutionary Digital Circuit Design with Fast Candidate Solution Establishment in Field Programmable Gate Arrays. In 2014 IEEE International Conference on Evolvable Systems Proceedings. Piscataway: Institute of Electrical and Electronics Engineers, 2014. p. 85-92. ISBN: 978-1-4799-4480-4.
Detail

MENŠÍK, P.; STARÝ, M.; MARTON, D. Water Management Software for Controlling the Water Supply Function of Many Reservoirs in a Watershed. WATER RESOUR+, 2015, vol. 42, no. 1, p. 133-145. ISSN: 0097-8078.
Detail

LÍZAL, F.; JEDELSKÝ, J.; ADAM, J.; BĚLKA, M.; JÍCHA, M. Measurement of Aerosol Deposition in a Replica of Human Airways by Positron Emission Tomography. Busan, Korea: Korean Association for Particle and Aerosol Research, 2014. p. 1 (1 s.).
Detail

DOBAI, R. Evolutionary On-line Synthesis of Hardware Accelerators for Software Modules in Reconfigurable Embedded Systems. In 2014 24th International Conference on Field Programmable Logic and Applications (FPL). Munich: Institute of Electrical and Electronics Engineers, 2014. p. 1-6. ISBN: 978-3-00-044645-0.
Detail

PŘIKRYL, Z. Fast Simulation of Pipeline in ASIP simulators. In 15th International Workshop on Microprocessor Test and Verification. Austin: IEEE Computer Society, 2014. p. 1-6. ISBN: 978-0-7695-4000-9.
Detail

LÍZAL, F.; JEDELSKÝ, J.; BĚLKA, M.; ZAREMBA, M.; MALÝ, M.; JÍCHA, M. Investigation of the Airflow inside Realistic and Semi-Realistic Replicas of Human Airways. In EPJ Web of Conferences. EPJ Web of Conferences. Francie: EDP Sciences, 2015. p. 1-8. ISSN: 2100-014X.
Detail

JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P. Multifunkční jednotka pro snižování polutantů z odpadních plynů. In Ochrana Ovzdušia 2014. Kongres STUDIO, s.r.o., 2014. s. 120-123. ISBN: 978-80-89565-17-7.
Detail

SEDLÁK, J.; CHLADIL, J.; SLANÝ, M.; KOUŘIL, K. Introduction to Processing of CT Clinical Metadata of Disabled Part of Patient Knee Joint. Manufacturing TECHNOLOGY, 2014, vol. 14, no. 4, p. 611-618. ISSN: 1213-2489.
Detail

RICHTER, I.; KWIECIEN, P.; FIALA, J.; PETRÁČEK, J.; EKSIOGLU ÖZOK, Y.; KUZMIAK, V.; ČTYROKÝ, J. Physics and advanced simulations of photonic and plasmonic structures. In Proc. 16th Int. Conference on Transparent Optical Networks ICTON 2014. International Conference on Transparent Optical Networks. 2014. p. Tu.D5.3-1 (Tu.D5.3-9 p.)ISBN: 978-1-4799-5601-2. ISSN: 2162-7339.
Detail

PETRÁČEK, J.; KWIECIEN, P.; RICHTER, I.; EKSIOGLU ÖZOK, Y. Analysis of plasmonic slot waveguide couplers in linear and nonlinear regimes. Proc. XXII International Workshop on Optical Waveguide Theory and Numerical Modelling OWTNM 2014. 2014. p. 75-75.
Detail

EKSIOGLU, Y.; PETRÁČEK, J. Self-pulsing and chaos in coupled ring resonators with non-instantaneous Kerr-nonlinear response. In Proc. 14th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2014, Postdeadline papers. 2014. p. 1-2. ISBN: 9781479936823.
Detail

INGELI, R.; ČEKON, M.; PAULOVIČOVÁ, L. Energy consumption for heating of recovery elementary school. Vienna, Austria: 2014. p. 130-133.
Detail

CHOUDHURY, D.; URBAN, F.; VRBKA, M.; HARTL, M.; KŘUPKA, I. A novel tribological study on DLC-coated micro-dimpled Orthopedics implant interface. Journal of the mechanical behavior of biomedical materials, 2015, vol. 2015, no. 45, p. 121-131. ISSN: 1751-6161.
Detail

CHOUDHURY, D.; ROY, T.; KRUPKA, I.; HARTL, M.; MOOTANAH, R. Tribological Investigation of Ultra-High Weight Molecular Polyethylene Against Advanced Ceramic Surfaces in a hip Joint Conditions. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2015, vol. 229, no. 4, p. 410-419. ISSN: 1350-6501.
Detail

ALBHILIL, A.; PALOU, M.; KOZÁNKOVÁ, J.; BOHÁČ, M. Thermal and Microstructure Stability of Cordierite-Mullite Ceramics Prepared from Natural Raw Materials-Part II. Arabian Journal for Science and Engineering, 2014, vol. 2015, no. 40, p. 151-161. ISSN: 2191-4281.
Detail

KLOC, P.; AUBRECHT, V.; BARTLOVÁ, M.; COUFAL, O. Radiation transfer in air and air-Cu plasmas for two temperature profiles. Journal of Physics D: Applied Physics, 2015, vol. 48, no. 5, p. 1-13. ISSN: 0022-3727.
Detail

ŠOTNER, R.; JEŘÁBEK, J.; HERENCSÁR, N.; VRBA, K.; DOSTÁL, T. Features of multi-loop structures with OTAs and adjustable current amplifier for second-order multiphase/quadrature oscillators. AEU - International Journal of Electronics and Communications, 2015, vol. 69, no. 5, p. 814-822. ISSN: 1434-8411.
Detail

YADAV, R.; HAVLICA, J.; PTÁČEK, P.; KUŘITKA, I.; KOŽÁKOVÁ, Z.; PALOU, M.; BARTONÍČKOVÁ, E.; BOHÁČ, M.; FRAJKOROVÁ, F.; MÁSILKO, J.; ZMRZLÝ, M.; HAJDÚCHOVÁ, M.; ENEV, V. Structural and Magnetic Properties of CoFe2O4 Nanoparticles Synthesized by Starch-Assisted Sol-Gel Auto-Combustion Method in Air, Argon, Nitrogen and Vacuum Atmospheres. Journal of Superconductivity and Novel Magnetism, 2014, vol. 2015, no. 28, p. 249-258. ISSN: 1557-1947.
Detail

YADAV, R.; HAVLICA, J.; KUŘITKA, I.; KOŽÁKOVÁ, Z.; PALOU, M.; BARTONÍČKOVÁ, E.; BOHÁČ, M.; FRAJKOROVÁ, F.; MÁSILKO, J.; HAJDÚCHOVÁ, M.; ENEV, V.; WASSERBAUER, J. Magnetic Properties of ZnFe2O4 Nanoparticles Synthesized by Starch-Assisted Sol-Gel Auto-combustion Method. Journal of Superconductivity and Novel Magnetism, 2014, vol. 2015, no. 28, p. 1417-1423. ISSN: 1557-1947.
Detail

YADAV, R.; HAVLICA, J.; HNATKO, M.; ŠAJGALÍK, P.; CIGÁŇ, A.; PALOU, M.; BARTONÍČKOVÁ, E.; BOHÁČ, M.; FRAJKOROVÁ, F.; MÁSILKO, J.; ZMRZLÝ, M.; KALINA, L.; HAJDÚCHOVÁ, M.; ENEV, V. Magnetic properties of Co1-xZnxFe2O4 spinel ferrite nanoparticles synthesized by starch-assisted sol–gel auto-combustion method and its ball milling. J. Magnetism Magn. Mat., 2014, vol. 2015, no. 378, p. 190-199. ISSN: 0304-8853.
Detail

HASIL, P.; VÍTOVEC, J. Conditional oscillation of half-linear Euler-type dynamic equations on time scales. Electronic Journal of Qualitative Theory of Differential Equations, 2015, vol. 2015, no. 6, p. 1-24. ISSN: 1417-3875.
Detail

HÁJEK, J.; DOHNAL, M.; VONDÁL, J.; BROUKAL, J. Analysis of effervescent spray quality for oil-fired furnace application. Clean Technologies and Environmental Policy, 2015, vol. 17, no. 5, p. 1195-1205. ISSN: 1618-954X.
Detail

YADAV, R.; HAVLICA, J.; KUŘITKA, I.; KOŽÁKOVÁ, Z.; PALOU, M.; BARTONÍČKOVÁ, E.; BOHÁČ, M.; FRAJKOROVÁ, F.; MÁSILKO, J.; KALINA, L.; HAJDÚCHOVÁ, M.; ENEV, V.; WASSERBAUER, J. Magnetic Properties of Dysprosium-Doped Cobalt Ferrite Nanoparticles Synthesized by Starch-Assisted Sol-Gel Auto-Combustion Method. Journal of Superconductivity and Novel Magnetism, 2015, vol. 2015, no. 28, p. 2097-2107. ISSN: 1557-1947.
Detail

SEDLÁK, J.; ŘÍČAN, D.; PÍŠKA, M.; ROZKOŠNÝ, L. Study of materials produced by powder metallurgy using classical and modern additive laser technology. Procedia Engineering, 2015, vol. 100, no. 1, p. 1232-1241. ISSN: 1877-7058.
Detail

SEDLÁK, J.; ŘÍČAN, D.; PÍŠKA, M. Study of Materials Produced by Powder Metallurgy Using Classical and Modern Additive Laser Technology. In DAAAM International. 1. Vienna: DAAAM International Symposium, 2014. p. 1-10. ISBN: 978-3-901509-99-5.
Detail

Taposh Roy, Dipankar Choudhury, Subir Ghosh, Azuddin Bin Mamat, Belinda Pingguan-Murphy. Improved friction and wear performance of microdimpled ceramic-on-ceramic interface for hip joint arthroplasty ceramic-on-ceramicinterfaceforhipjointarthroplasty. Ceramics International, 2014, vol. 41, no. 1, p. 681-690. ISSN: 0272-8842.
Detail

Hee Ay Ching, Dipankar Choudhury, Md Julker Nine, Noor Azuan Abu Osman. Effects of surface coating on reducing friction and wear of orthopaedic implants. Science and Technology of Advanced Materials, 2014, vol. 15, no. 1, p. 1-21. ISSN: 1878-5514.
Detail

Subir Ghosh, Dipankar Choudhury, Nabangshu Shekhar das, Belinda Pingguan-Murphy. Tribological role of synovial fluid compositions on artificial joints a systematic review of the last ten. Lubrication Science, 2014, vol. 26, no. 6, p. 387-410. ISSN: 1557-6833.
Detail

POLZER, S.; GASSER, T.; NOVÁK, K.; MAN, V.; TICHÝ, M.; SKÁCEL, P.; BURŠA, J. Structure-based constitutive model can accurately predicts planar biaxial properties of arotic wall tissue. Acta Biomaterialia, 2015, vol. 14, no. 1, p. 133-145. ISSN: 1742-7061.
Detail

MENŠÍK, P.; STARÝ, M.; MARTON, D. Automatizace řešení zásobní funkce vodohospodářské soustavy. Vodohospodářské technicko-ekonomické informace, 2015, roč. 57, č. 1, s. 2-5. ISSN: 0322-8916.
Detail

GIRGLE, F.; HORÁK, D.; KOSTIHA, V.; PROKEŠ, J.; ŠTĚPÁNEK, P. Moderní kompozitní materiály jako náhrada klasické výztuže do betonu. Materiály pro stavbu, 2015, roč. 20, č. 2, s. 30-33. ISSN: 1213-0311.
Detail

MARTON, D.; STARÝ, M.; MENŠÍK, P.; PASEKA, S. Hydrological Reliability Assessment of Water Management Solution of Reservoir Storage Capacity in Conditions of Uncertainty. In Drought: Research and Science-Policy Interfacing. 1. Leiden, Netherlands: CRC Press Taylor & Francis Group, 2015. p. 377-382. ISBN: 978-1-138-02779-4.
Detail

ELIÁŠ, M.; KLOC, P.; JAŠEK, O.; MAZÁNKOVÁ, V.; TRUNEC, D.; HRDÝ, R.; ZAJÍČKOVÁ, L. Atmospheric pressure barrier discharge at high temperature: Diagnostics and carbon nanotubes deposition. Journal of Aplied Physics, 2015, vol. 117, no. 10, p. 103301-1 (103301-10 p.)ISSN: 0021-8979.
Detail

EKSIOGLU, Y.; PETRÁČEK, J. Self-pulsing and chaos in coupled ring resonators with non-instantaneous Kerr-nonlinear response. Proc. CEITEC Annual Conference "Frontiers in material and Life Science". Brno: 2014. p. 118-118. ISBN: 978-80-210-7159-9.
Detail

KOVALENKO, A. GUERERRO, A. GARCIA-BELMONTE, G. Role of vertical segregation in semitransparent organic photovoltaics. ACS APPL MATER INTER, 2014, vol. 2015, no. 7, p. 1234-1239. ISSN: 1944-8244.
Detail

Antonio Guerrero, Hamed Heidari, Teresa S. Ripolles, Alexander Kovalenko, Martin Pfannmöller, Sara Bals, Louis-Dominique Kauffmann, Juan Bisquert, Germà Garcia-Belmonte. Shelf Life Degradation of Bulk Heterojunction Solar Cells: Intrinsic Evolution of Charge Transfer Complex. Advanced Energy Materials, 2014, vol. 2014, no. 4, p. 1401997-1401997. ISSN: 1614-6840.
Detail

BOHÁČ, M.; PALOU, M.; NOVOTNÝ, R.; FRAJKOROVÁ, F. Vliv teploty na hydrataci ternárního systému: cement-metakaolin-struska. In 36. Mezinárodní slovenský a český kalorimetrický semináž. 1. Universita Pardubice: 2014. s. 89-92. ISBN: 978-80-7395-784-1.
Detail

PTÁČEK, P.; BARTONÍČKOVÁ, E.; ŠVEC, J.; OPRAVIL, T.; ŠOUKAL, F.; FRAJKOROVÁ, F. The kinetics and mechanism of thermal decomposition of SrCO3 polymorphs. Ceramics International, 2015, vol. 41, no. 1, p. 115-126. ISSN: 0272-8842.
Detail

PETRÁČEK, J.; KWIECIEN, P.; RICHTER, I.; EKSIOGLU ÖZOK, Y. Analysis of plasmonic slot waveguide couplers in linear and nonlinear regimes. Proc. CEITEC Annual Conference "Frontiers in material and Life Science". Masarykova univerzita, 2014. p. 195-195. ISBN: 978-80-210-7159-9.
Detail

BOHÁČ, M.; NOVOTNÝ, R.; FRAJKOROVÁ, F.; YADAV, R.; OPRAVIL, T.; PALOU, M. Properties of Cement Pastes with different Particle Size Fractions of Metakaolin. World Academy of Science, engeneering and Technology, 2015. p. 538-542.
Detail

SEDLÁK, J.; SLANÝ, M.; FIALA, Z.; JAROŠ, A. Production Method of Implant Prototype of Knee-Joint Femoral Component. Manufacturing TECHNOLOGY, 2015, vol. 15, no. 2, p. 195-204. ISSN: 1213-2489.
Detail

SEDLÁK, J.; DRÁBEK, T.; MOURALOVÁ, K.; CHLADIL, J.; KOUŘIL, K. Machining Issues of Titanium Alloys. International Journal of Metalcasting, 2015, vol. 9, no. 2, p. 41-50. ISSN: 1939-5981.
Detail

MÁRIK, M.; HUBÁLEK, J.; ŠIMŮNKOVÁ, H.; MOZALEV, A. Electrochemical preparation and characterization of tantalum layers. Ceitec PHD Retreat. 1. Brno: MUNI PRESS, 2015. p. 102-102. ISBN: 978-80-210-7825-3.
Detail

JEGLA, Z.; VONDÁL, J.; HÁJEK, J. Standards for fired heater design: An assessment based on computational modelling. Applied Thermal Engineering, 2015, vol. 89, no. 1, p. 1068-1078. ISSN: 1359-4311.
Detail

MACKŮ, R.; KOKTAVÝ, P.; SEDLÁK, P.; SMULKO, J.; TRAWKA, M. Analytical fluctuation enhanced sensing by resistive gas sensors. Sensors and Actuators B: Chemical, 2015, vol. 2015, no. 213, p. 390-396. ISSN: 0925-4005.
Detail

GABOR, G.; RUSZKOWSKI, S.; VÍTOVEC, J. Ważewski type theorem for non-autonomous systems of equations with a disconnected set of egress points. APPLIED MATHEMATICS AND COMPUTATION, 2015, vol. 265, no. 6, p. 358-369. ISSN: 0096-3003.
Detail

BRUMMER, V.; JECHA, D.; LEŠTINSKÝ, P.; SKRYJA, P.; HUDÁK, I. Pilot plant long-term test of particulate matter (PM) removal from air stream emerging from granulated fertilizers production (stationary source). In Air Pollution XXIII. Southampton, UK: WIT Press, 2015. p. 419-430. ISBN: 978-1-84564-964-7.
Detail

LEŠTINSKÝ, P.; VEČEŘ, M.; NAVRÁTIL, P.; STEHLÍK, P. The removal of CO2 from biogas using a laboratory PSA unit: design using breakthrough curves. Clean Technologies and Environmental Policy, 2015, vol. 17, no. 5, p. 1281-1289. ISSN: 1618-954X.
Detail

LEŠTINSKÝ, P.; VEČEŘ, M.; VAŸRYNEN, P.; WICHTERLE, K. The effect of the draft tube geometry on mixing in a reactor with an internal circulation loop - A CFD simulation. Chemical Engineering and Processing, 2015, vol. 94, no. 8, p. 29-34. ISSN: 0255-2701.
Detail

LEŠTINSKÝ, P.; JECHA, D.; BRUMMER, V.; STEHLÍK, P. Wet Flue Gas Desulfurization Using a New O-Element Design Which Replaces the Venturi Scrubber. In International Science Index. World Academy of Science, Engineering and Technology. New York: 2015. p. 130-134. ISSN: 1307-6892.
Detail

ČEKON, M. Accuracy analysis of longwave sky radiation models in the MZELWE module of the ESP-r program. ENERGY AND BUILDINGS, 2015, vol. 2015, no. 103, p. 147-158. ISSN: 0378-7788.
Detail

ROY, S.; KUMAR, A.; BAIG, M.; MASAŘÍK, M.; PROVAZNÍK, I. Virtual screening, ADMET profiling, molecular docking and dynamics approaches to search for potent selective natural molecules based inhibitors against metallothionein-III to study Alzheimer disease. METHODS, 2015, vol. 25, no. 4, p. 1-26. ISSN: 1046-2023.
Detail

KOLLÁROVÁ, V.; ČOLLÁKOVÁ, J.; DOSTÁL, Z.; SLABÝ, T.; VESELÝ, P.; CHMELÍK, R. Quantitative phase imaging through scattering media. In Quantitative Phase Imaging. San Francisco, CA: SPIE-INT SOC OPTICAL ENGINEERING, 1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA, 2015. p. 93360T-1 (93360T-8 p.)ISBN: 978-1-62841-426-4.
Detail

MENŠÍK, P.; MARTON, D.; STARÝ, M. Using Predictive Model for Strategic Control of Multi-reservoir System Storage Capacity. In SGEM Conference Proceedings. International multidisciplinary geoconference SGEM. Hydrology and Water Resources. 51 Alexander Malinov Blvd., 1712, Sofia, Bulgaria: STEF92 Technology Ltd., 2015. p. 729-736. ISBN: 978-619-7105-36-0. ISSN: 1314-2704.
Detail

MACKŮ, R.; KOKTAVÝ, P.; TRČKA, T. Anatomy of Excess Noise Sources and Electromagnetic Emission During Loading of Fibre Reinforced Composites. In Proceedings of the 4th International Conference of Engineering Against Failure. 2015. p. 511-518. ISBN: 978-960-88104-5-7.
Detail

ŠKRIPKOVÁ, L. Capillary transfer coefficient in diffusion equation derived from a known solution. In ICNAAM 2014 - AIP Conference Proceedings 1648. Melville: American Institute of Physics, 2015. p. 410015-1 (410015-4 p.)ISBN: 978-0-7354-1287-3.
Detail

VONDÁL, J.; HÁJEK, J. Wall heat transfer in gas-fired furnaces: Effect of radiation modelling. Applied andComputational Mechanics, 2015, vol. 9, no. 1, p. 67-78. ISSN: 1802-680X.
Detail

JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P. Snižování polutantu VOC na multifunkční jednotce. In Sborník přednášek - VOC 2015 - Emise organických látek z technologických procesů a metody jejich snižování. Český svaz vědeckotechnických společností. Pardubice: Český svaz vědeckotechnických společností, 2015. s. 49-53. ISBN: 978-80-02-02597-9.
Detail

VONDÁL, J.; JEGLA, Z.; HÁJEK, J. Fired heaters: validation of design parameters based on numerical modelling. In 10th European Conference on Industrial Furnaces and Boilers. Rio Tinto, Portugal: CENERTEC, 2015. p. 1-12. ISBN: 978-972-99309-7-3.
Detail

ŠKVARENINA, Ľ. Current Fluctuations of Reverse-Biased Solar Cells. In Proceedings of the 21st Conference STUDENT EEICT 201. Brno: Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015. p. 546-550. ISBN: 978-80-214-5148-3.
Detail

KŘÍŽKOVÁ, S.; NGUYEN, H.; STANISAVLJEVIC, M.; KOPEL, P.; VACULOVIČOVÁ, M.; ADAM, V.; KIZEK, R. Microchip Capillary Electrophoresis: Quantum Dots and Paramagnetic Particles for Bacteria Immunoseparation. In Microchip Capillary Electrophoresis Protocols. Springer Science+Business Media New York 2015, 2015. p. 67-79. ISBN: 978-1-4939-2353-3.
Detail

BOHÁČ, M.; NOVOTNÝ, R.; MÁSILKO, J.; OPRAVIL, T.; ŠOUKAL, F.; YADAV, R.; PALOU, M. Hydration of Synthetized Clinker Phases C3S and C3A with Metakaolin in Isothermal Conditions. Advanced Materials Research (online), 2015, vol. 2015, no. 1124, p. 23-30. ISSN: 1662-8985.
Detail

FIALA, Z.; JAROŠ, A.; SEDLÁK, J.; KOLÁŘ, L.; BLAŽKOVÁ, V. Effect of Spindle Unit Extrusion on Stability of Machining Process. Manufacturing TECHNOLOGY, 2015, vol. 15, no. 3, p. 329-333. ISSN: 1213-2489.
Detail

SEDLÁK, J.; SLANÝ, M.; FIALA, Z.; JAROŠ, A.; BLAŽKOVÁ, V. Testing of Implant Prototype of Femoral Component Using Hydraulic Machine ZD40. Manufacturing TECHNOLOGY, 2015, vol. 2015, no. 3, p. 416-423. ISSN: 1213-2489.
Detail

TKACHENKO, S.; NEČAS, D.; DATSKEVICH, O.; ČUPERA, J.; SPOTZ, Z.; VRBKA, M.; KULAK, L.; FORET, R. Tribological Performance of Ti-Si-Based in Situ Composites. TRIBOLOGY TRANSACTIONS, 2016, vol. 59, no. 2, p. 340-351. ISSN: 1040-2004.
Detail

MIKULKA, J. GPU-Accelerated Reconstruction of T2 Maps in Magnetic Resonance Imaging. Measurement Science Review, 2015, vol. 2015, no. 4, p. 210-218. ISSN: 1335-8871.
Detail

BLAŽKOVÁ, V.; SEDLÁK, J.; JAROŠ, A.; FIALA, Z.; MOURALOVÁ, K.; KOLÁŘ, L. Obrábění pokročilých keramických materiálů. Strojírenská technologie, 2015, roč. 20, č. 1, s. 2-11. ISSN: 1211-4162.
Detail

BARTOŠ, M.; HRABOVSKÝ, M. Humidity sensing properties of graphene and graphene oxid. San Francisco: 2015. p. 238-238.
Detail

ŠIKULA, O.; VOJKŮVKOVÁ, P.; ŠÍMA, J.; PLÁŠEK, J.; GEBAUER, G. Hybrid Roof Panels for Night Cooling and Solar Energy Utilization in Buildings. In International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability 2015 (TMREES15). Energy Procedia. Energy Procedia Volume 74. Amsterdam: Elsevier, 2015. p. 177-183. ISBN: 9781510812239. ISSN: 1876-6102.
Detail

SEDLÁK, J.; ZEMČÍK, O.; SLANÝ, M.; CHLADIL, J.; KOUŘIL, K.; SEKERKA, V.; ROZKOŠNÝ, L. Production of Prototype Parts Using Direct Metal Laser Sintering Technology. Acta Polytechnica, 2015, vol. 55, no. 4, p. 260-266. ISSN: 1210-2709.
Detail

KISELA, T. An analysis of the stability boundary for a linear fractional difference system. Mathematica Bohemica, 2015, vol. 140, no. 2, p. 195-203. ISSN: 0862-7959.
Detail

KISELA, T.; ČERMÁK, J. Stability properties of two-term fractional differential equations. NONLINEAR DYNAMICS, 2015, vol. 80, no. 4, p. 1673-1684. ISSN: 0924-090X.
Detail

KISELA, T.; ČERMÁK, J. Asymptotic Stability Of Dynamic Equations With Two Fractional Terms: Continuous Versus Discrete Case. Fractional Calculus and Applied Analysis, 2015, vol. 18, no. 2, p. 437-458. ISSN: 1311-0454.
Detail

ŠOMPLÁK, R.; TOUŠ, M.; PAVLAS, M.; GREGOR, J.; POPELA, P.; RYCHTÁŘ, A. Multi-Commodity Network Flow Model Applied to Waste Processing Cost Analysis for Producers, Chemical Engineering Transactions. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering Transactions. Milano, Itálie: AIDIC Serviyi Srl, 2015. p. 733-738. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
Detail

CHOUDHURY, D.; GHOSH, S.; ALI, F.; VRBKA, M.; HARTL, M.; KŘUPKA, I. The influence of surface modification on friction and lubrication mechanism under a bovine serum lubricated condition. TRIBOLOGY TRANSACTIONS, 2016, vol. 59, no. 2, p. 316-322. ISSN: 1040-2004.
Detail

MARTON, D.; MENŠÍK, P.; STARÝ, M. Using Predictive Model for Strategic Control of Multi-reservoir System Storage Capacity. Procedia Engineering, 2015, vol. 2015, no. 119, p. 994-1002. ISSN: 1877-7058.
Detail

FRAJKOROVÁ, F.; BODIŠOVÁ, K.; BOHÁČ, M.; BARTONÍČKOVÁ, E.; SEDLÁČEK, J. Preparation and characterisation of porous composite biomaterials based on silicon nitride and bioglass. Ceramics International, 2015, vol. 41, no. 8, p. 9770-9778. ISSN: 0272-8842.
Detail

MÁŠA, V.; TOUŠ, M.; PAVLAS, M. Using a utility system grey-box model as a support tool for progressive energy management and automation of buildings. Clean Technologies and Environmental Policy, 2016, vol. 18, no. 1, p. 195-208. ISSN: 1618-954X.
Detail

EKSIOGLU ÖZOK, Y.; PETRÁČEK, J. Dynamical analysis of double-ring resonator with non-instantenous Kerr response and effect of loss. Optical and Quantum Electronics, 2015, vol. 47, no. 10, p. 3323-3335. ISSN: 0306-8919.
Detail

VONDÁL, J.; HÁJEK, J.; DOHNAL, M. Numerical study of stirred tank with multiphase system. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering Transactions. Milano, Italy: Aidic Servizi Srl, 2015. p. 1051-1056. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
Detail

DOHNAL, M.; HÁJEK, J.; VONDÁL, J. Unsteadiness and Spatio-Temporal Statistics in Intermediate Effervescent Spray Region. In CHEMICAL ENGINEERING TRANSACTIONS - VOL.45. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi Srl, 2015. p. 1027-1032. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
Detail

ELCNER, J.; LÍZAL, F.; JEDELSKÝ, J.; JÍCHA, M.; CHOVANCOVÁ, M. Numerical investigation of inspiratory airflow in a realistic model of the human tracheobronchial airways and a comparison with experimental results. Biomechanics and Modeling in Mechanobiology, 2016, vol. 15, no. 2, p. 447-469. ISSN: 1617-7959.
Detail

MARTON, D.; STARÝ, M.; MENŠÍK, P. Analysis of the influence of input data uncertainties on determining the reliability of reservoir storage capacity. Journal of Hydrology and Hydromechanics, 2015, vol. 63, no. 4, p. 287-294. ISSN: 0042-790X.
Detail

MAJER, Z.; NÁHLÍK, L.; MALÍKOVÁ, L. Particulate Composite Damage: The Influence of Particle Shape on Crack Path. Key Engineering Materials (print), 2015, vol. 662, no. 1, p. 77-80. ISSN: 1013-9826.
Detail

LÍZAL, F.; BĚLKA, M.; ADAM, J.; JEDELSKÝ, J.; JÍCHA, M. A method for in vitro regional aerosol deposition measurement in a model of the human tracheobronchial tree by the positron emission tomography. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2015, vol. 229, no. 10, p. 750-757. ISSN: 0954-4119.
Detail

CETIN , A. E.; ETEZADI, D.; GALARRETA, B.C.; BUSSON, M.P.; EKSIOGLU ÖZOK, Y.; ALTUG, H. Plasmonic nanohole arrays on a robust hybrid substrate for highly sensitive label-free biosensing. ACS Photonics, 2015, no. 2, p. 1167-1174. ISSN: 2330-4022.
Detail

EKSIOGLU, Y.; CETIN , A. E.; PETRÁČEK, J. Optical Response of Plasmonic Nanohole Arrays: Comparison of Square and Hexagonal Lattices. Plasmonics, 2016, vol. 11, no. 3, p. 852-856. ISSN: 1557-1955.
Detail

BRUMMER, V.; JECHA, D.; MARTINEC, J.; SKRYJA, P.; STEHLÍK, P. Impact of catalytic oxidation operating conditions on VOC and CO conversions on the Pt-Pd/Al2O3 catalyst. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Milan, Italy: Aidic Servizi S.r.l., 2015. ISBN: 978-88-95608-36-5.
Detail

DOKOUPIL, J.; PAPEŽ, M.; VÁCLAVEK, P. Bayesian comparison of Kalman filters with known covariance matrices. In AIP conference proceedings. AIP conference proceedings. 2015. p. 1-4. ISBN: 978-0-7354-1287-3. ISSN: 0094-243X.
Detail

DOKOUPIL, J.; VÁCLAVEK, P. A multi-mode cantilever singular point detection using adaptive hypothesis testing. Journal of Physics: Conference Series, 2015, vol. 633, no. 1, p. 1-4. ISSN: 1742-6588.
Detail

DOKOUPIL, J.; VÁCLAVEK, P. Bayesian change detection in the growing window recursive strategy. In Applied mechanics and materials. Applied Mechanics and Materials. Německo: Trans Tech Publications Ltd, 2015. p. 399-403. ISBN: 978-3-03835-499-4. ISSN: 1660-9336.
Detail

EKSIOGLU ÖZOK, Y.; PETRÁČEK, J. Self-pulsing in nonlinear Kerr-type coupled ring resonators with effect of loss. In Nonlinear Optics and Applications IX. Proc. SPIE. Bellingham: SPIE, 2015. p. 950309-1 (950309-8 p.)ISBN: 9781628416244.
Detail

ČERMÁK, J.; KISELA, T.; HORNÍČEK, J. Stability regions for fractional differential systems with a time delay. Communications in Nonlinear Science and Numerical Simulation, 2016, vol. 31, no. 1-3, p. 108-123. ISSN: 1007-5704.
Detail

ŠIMŮNKOVÁ, H.; KALINA, L.; BOUŠEK, J.; MOZALEV, A. Tantalum nanotube arrays via porous-alumina-assisted electrodeposition from ionic liquid: Electrical characterization. Hammamet, Tunisia: 2015. p. 19-19.
Detail

ŠIMŮNKOVÁ, H.; KALINA, L.; BOUŠEK, J.; MOZALEV, A. Electrical/dielectric properties of tantalum nanotube arrays via porous-alumina-assisted electrodeposition from ionic liquid. E-MRS Spring Meeting, Lille, France: 2015.
Detail

MAJER, Z.; NÁHLÍK, L. NUMERICAL ESTIMATION OF MICRO-CRACK PATHS IN POLYMER PARTICULATE COMPOSITE. In Engineering Mechanics 2014. 1. 2014. p. 376-379. ISBN: 978-80-214-4871-1.
Detail

DOKOUPIL, J.; PAPEŽ, M.; VÁCLAVEK, P. Comparison of Kalman filters formulated as the statistics of the Normal-inverse-Wishart distribution. In 54th IEEE Conference on Decision and Control. 54th IEEE Conference on Decision and Control. Institute of electrical and electronics engineers inc., 2015. p. 5008-5013. ISBN: 978-1-4799-7884-7. ISSN: 0743-1546.
Detail

RYBA, L.; DOKOUPIL, J.; VODA, A.; BESANCON, G. A real-time inverse-based hysteresis compensation with adaptation. In 54th IEEE Conference on Decision and Control. 54th IEEE Conference on Decision and Control. Institute of electrical and electronics engineers inc., 2015. p. 7335-7340. ISBN: 978-1-4799-7884-7. ISSN: 0743-1546.
Detail

DOBAI, R.; SEKANINA, L. Low-Level Flexible Architecture with Hybrid Reconfiguration for Evolvable Hardware. ACM Transactions on Reconfigurable Technology and Systems, 2015, vol. 8, no. 3, p. 1-24. ISSN: 1936-7406.
Detail

Tantalum nanotube arrays via porous-alumina-assisted electrodeposition from ionic liquid: Electrical characterization. In Tunisia: IOP Publishing Proceeding journals.
Detail

DUMBROVSKÝ, M.; SOBOTKOVÁ, V. et al. Long-Term Improvement in Surface Water Quality after Land Consolidation in a Drinking Water Reservoir Catchment. Soil and Water Research, 2015, vol. 10, no. 1, p. 49-55. ISSN: 1801-5395.
Detail

TOUŠ, M.; PAVLAS, M.; PUTNA, O.; STEHLÍK, P.; CRHA, L. Combined heat and power production planning in a waste-to-energy plant on a short-term basis. Energy, 2015, no. 90, p. 137-147. ISSN: 0360-5442.
Detail

STANISAVLJEVIC, M.; KŘÍŽKOVÁ, S.; VACULOVIČOVÁ, M.; KIZEK, R.; ADAM, V. Quantum dots-fluorescence resonance energy transfer-based nanosensors and their application. BIOSENSORS & BIOELECTRONICS, 2015, vol. 74, no. 1, p. 562-574. ISSN: 0956-5663.
Detail

MAJER, Z.; HUTAŘ, P.; FRANK, A.; ŠEVČÍK, M.; ZOUHAR, M.; PINTER, G.; NÁHLÍK, L. Point load effect on the buried polyolefin pipes lifetime. Polymer Engineering & Science, 2016, vol. 56, no. 1, p. 79-86. ISSN: 1548-2634.
Detail

ČEKON, M.; ROVNANÍK, P. Optical performance of colored crystalline solar cells for building energy efficient application. Procedia Manufacturing, 2015, vol. 2, no. 2, p. 342-347. ISSN: 2351-9789.
Detail

SHARMA, V.; HYNEK, D.; TRNKOVÁ, L.; HEMZAL, D.; MÁRIK, M.; KIZEK, R.; HUBÁLEK, J. Electrochemical determination of adenine using a glassy carbon electrode modified with graphene oxide and polyaniline. Microchimica Acta, 2016, vol. 161, no. 457, p. 1-8. ISSN: 0026-3672.
Detail

CHOVANCOVÁ, M.; ELCNER, J. The pressure gradient in the human respiratory tract. In EPJ Web of Conferences. EPJ Web of Conferences. EDP Sciences, 2014. p. 1-6. ISBN: 978-80-260-5375-0. ISSN: 2100-014X.
Detail

ŠIMŠÍKOVÁ, M. Interaction of graphene oxide with albumins: Effect of size, pH, and temperature. ARCHIVES OF BIOCHEMISTRY AND BIOPHYSICS, 2016, vol. 593, no. 1, p. 69-79. ISSN: 0003-9861.
Detail

SPOTZ, Z.; ČELKO, L.; ŠVEJCAR, J. Analysis of NiCrAl powder doped by Fe and Si after high temperature exposure. Kovové materiály, 2015, vol. 53, no. 6, p. 459-462. ISSN: 0023-432X.
Detail

PLASCENCIA, A.; CALTENCO, H.; BERAN, V. Comparison of Different Powered-wheelchair Control Modes for Individuals with Severe Motor Impairments. In ICINCO 2014 - Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics. Vienna: IEEE Computer Society, 2014. p. 353-359. ISBN: 978-989-758-040-6.
Detail

PLASCENCIA, A.; KARSTOFT, H. Map Building Based on a Xtion Pro Live RGBD and a Laser Sensors. Journal of Information Technology & Software Engineering, 2014, vol. 4, no. 1, p. 1-7. ISSN: 2165-7866.
Detail

ŠIMŠÍKOVÁ, M.; BARTOŠ, M.; KEŠA, P.; ŠIKOLA, T. Green approach for preparation of reduced graphene oxide decorated with gold nanoparticles and its optical and catalytic properties. MATERIALS CHEMISTRY AND PHYSICS, 2016, vol. 177, no. 1, p. 339-345. ISSN: 0254-0584.
Detail

ŠIMŠÍKOVÁ, M.; BARTOŠ, M.; ČECHAL, J.; ŠIKOLA, T. Decolorization of organic dyes by gold nanoflowers prepared on reduced graphene oxide by tea polyphenols. Catalysis Science and Technology, 2016, vol. 6, no. 9, p. 3008-3017. ISSN: 2044-4753.
Detail

ČEKON, M.; ROVNANÍK, P.; INGELI, R. Optical advances in the field of selected solar technologies for exploitation in building energy efficiency. The Asian Conference on Sustainability, Energy and the Environment, 2016, vol. 2015, no. 1, p. 723-735. ISSN: 2186-2311.
Detail

CABADA, A.; KISELA, T. Existence of positive periodic solutions of some nonlinear fractional differential equations. Communications in Nonlinear Science and Numerical Simulation, 2017, vol. 50, no. 1, p. 51-67. ISSN: 1007-5704.
Detail

Choudhury, D.; Lackner, JM. ; Major, L.; Morita, T.; Sawae, Y.; Bin Mamat, A. ; Stavness, I. ; Roy, CK.; Krupka, I. Improved wear resistance of functional diamond like carbon coated Ti-6Al-4V alloys in an edge loading conditions. Journal of the mechanical behavior of biomedical materials, 2016, vol. 59, no. 1, p. 586-595. ISSN: 1751-6161.
Detail

Choudhury, D.; Morita, T.; Sawae, Y. ; Lackner, JM. ; Towler, M. ; Krupka, I. A novel functional layered diamond like carbon coating for orthopedics applications. Diamond and Related Materials, 2016, vol. 61, no. 1, p. 56-69. ISSN: 0925-9635.
Detail

FRAJKOROVÁ, F.; MOLERO, E.; MONTERO, P.; CARMEN, M.; JAVIER, A.; FERRARI, B. Biodegradable bi-layered coatings shaped by dipping of Ti films followed by the EPD of gelatin/hydroxyapatite composites. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2016, vol. 36, no. 2, p. 343-355. ISSN: 1873-619X.
Detail

POSPÍŠILOVÁ ŠKRIPKOVÁ, L.; POSPÍŠIL, M. Representation of solutions of neutral differential equations with delay and with linear parts defined by pairwise permutable matrices. Miskolc Mathematical Notes, 2015, vol. 16, no. 1, p. 423-438. ISSN: 1787-2405.
Detail

ŠIMŮNKOVÁ, H.; LEDNICKÝ, T.; WHITEHEAD, A.; KALINA, L.; ŠIMŮNEK, P.; HUBÁLEK, J. Tantalum-based nanotube arrays via porous-alumina-assisted electrodeposition from ionic liquid: Formation and electrical characterization. Applied Surface Science, 2021, vol. 548, no. 149264, p. 149264-149274. ISSN: 0169-4332.
Detail

ČEKON, M.; Vysoké učení technické v Brně: Keramická tvarovka s nízkoemisivní povrchovou úpravou dutin. 28821, užitný vzor. (2015)
Detail

VONDÁL, J.; HÁJEK, J.; Vysoké učení technické v Brně, Brno, CZ: Zařízení pro výrobu cementového slínku. 28930, užitný vzor. (2015)
Detail

HÁJEK, J.; JUŘENA, T.; VONDÁL, J.; Vysoké učení technické v Brně, Brno, CZ: Redukční ventil. 28199, užitný vzor. (2015)
Detail

PAVLÍK, F.; SOBOTKOVÁ, V.; DUMBROVSKÝ, M.; DRONGOVÁ, K.; UHROVÁ, J.; Vysoké učení technické v Brně, Brno, CZ.: Zařízení pro volumetrickou kvantifikaci projevů vodní eroze půdy v efemérních rýhách. 25471, užitný vzor. (2013)
Detail

STRECKER, Z.; MAZŮREK, I.; ROUPEC, J.; Vysoké učení technické v Brně Technická 2896/2 616 69 BRNO Česká Republika: Ovládací obvod magnetoreologického tlumiče. 304636, patent. (2014)
Detail

VACULOVIČOVÁ, M.; ZÍTKA, J.; ADAM, V.; KIZEK, R.; Vysoké učení technické v Brně, Brno, CZ: 3D-tištěný optický detektor pro mikro-kolonové separace. 28931, užitný vzor. (2015)
Detail

JECHA, D.; BÉBAR, L.; BRUMMER, V.; LEŠTINSKÝ, P.; Vysoké učení technické v Brně, Brno, CZ: Homogenizační zařízení s nástřikem kapaliny. 28048, užitný vzor. (2015)
Detail

MACKŮ, R.; TRČKA, T.: AFC Central Power Unit v. 1.0; AFC Central Power Unit v. 1.0. laboratoře Baumann Technoloagie CZ, a.s.. URL: http://www.ufyz.feec.vutbr.cz/veda-a-vyzkum/produkty/2013/AFC-central-power-unit-v-1-0. (funkční vzorek)
Detail

MACKŮ, R.; GRMELA, L.: Start and Battery Unit v. 2.0; Start and Battery Unit v. 2.0. laboratoře Baumann Technoloagie CZ, a.s.. URL: http://www.ufyz.feec.vutbr.cz/veda-a-vyzkum/produkty/2013/start-and-battery-unit-v-2-0. (funkční vzorek)
Detail

DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: 6/2013; Rozlišení zemních teras z hlediska jejich využití. Vysoké učení technické, Fakulta Stavební, Ústav vodního hospodářství, Žižkova 17, 602 00 Brno. (specializovaná mapa s odborným obsahem)
Detail

DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: 5/2013; Kategorizace zemních teras z hlediska ozelenění terasových svahů. Vysoké učení technické, Fakulta Stavební, Ústav vodního hospodářství, Žižkova 17, 602 00 Brno. (specializovaná mapa s odborným obsahem)
Detail

DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: 6/2013; Vymezení zemních teras, kategorizace podle typu zemních teras a jejich poškození. Vysoké učení technické, Fakulta Stavební, Ústav vodního hospodářství, Žižkova 17, 602 00 Brno. (specializovaná mapa s odborným obsahem)
Detail

DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: 4/2013; Mapa erozního smyvu po zhutnění půdy. Vysoké učení technické, Fakulta Stavební, Ústav vodního hospodářství, Žižkova 17, 602 00 Brno. (specializovaná mapa s odborným obsahem)
Detail

SEDLÁK, J.; DUSBABA, M.: Válec motoru Jawa 50; Válec motoru Jawa 50. Ústav strojírenské technologie, odbor technologie obrábění. Fakulta strojního inženýrství Vysokého učení technického v Brně, Technická 2896/2, 616 69 Brno. (funkční vzorek)
Detail

SEDLÁK, J.; SAMOHÝL, L.: Díl upínacího systému mačky; Přední díl upínacího systému horolezecké mačky. Ústav strojírenské technologie, odbor technologie obrábění. Fakulta strojního inženýrství Vysokého učení technického v Brně, Technická 2896/2, 616 69 Brno. (funkční vzorek)
Detail

ROUPEC, J.; KUBÍK, M.; MAZŮREK, I.; STRECKER, Z.: TSN-100; Testovací magnetický obvod reometru. A2/412. URL: http://dl.uk.fme.vutbr.cz/zobraz_soubor.php?id=2250. (funkční vzorek)
Detail

MIKULKA, J.; FIALA, P.: Dendro čtečka; Dendrochronologická čtečka. Thermosanace, s.r.o.. URL: http://www.utee.feec.vutbr.cz/?q=cs/dendrochronologicka-ctecka. (funkční vzorek)
Detail

MIKULKA, J.: Dendrochronologie; Dendrochronology. Thermonosanace, VUT FEKT, UTEE. URL: http://www.utee.feec.vutbr.cz/?q=cs/software-pro-dendrochronologicke-datovani. (software)
Detail

DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: Hodonínsko-eroze; Mapa erozní ohroženosti zemědělských půd vodní erozí v Mikroregionu Hodonínsko. VUT v Brně, FAST, ÚVHK. (specializovaná mapa s odborným obsahem)
Detail

DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: Hodonínsko-hydro; Mapa hydrologických poměrů v Mikroregionu Hodonínsko. VUT v Brně, FAST, ÚVHK. (specializovaná mapa s odborným obsahem)
Detail

DUMBROVSKÝ, M.; SOBOTKOVÁ, V.: Podluží-hydro; Mapa hydrologických poměrů v Mikroregionu Podluží. VUT v Brně, FAST, ÚVHK. (specializovaná mapa s odborným obsahem)
Detail

SEDLÁK, J.: Skořepinový implantát; Skořepinový implantát femorální komponenty. Funkční vzorek je vystaven na pracovišti řešitele. Ústav strojírenské technologie, odbor technologie obrábění. Fakulta strojního inženýrství Vysokého učení technického v Brně, Technická 2896/2, 616 69 Brno, IČ 00216305.. (funkční vzorek)
Detail

MARTON, D.; STARÝ, M.; MENŠÍK, P.: UNCERESERVOIR; UNCERESERVOIR - Vodohospodářské řešení zásobní funkce nádrže. http://uvhk.fce.vutbr.cz/software.php. URL: http://uvhk.fce.vutbr.cz/software.php. (software)
Detail

ŠIMŮNKOVÁ, H.: Elektrochemická cela; Elektrochemická cela s upevněnou pomocnou a referenční elektrodou. LabSensNano T10-N0.66. URL: http://www.umel.feec.vutbr.cz/LabSensNano/products.aspx?id=108. (funkční vzorek)
Detail

MENŠÍK, P.; STARÝ, M.: HyRes; Operativní řízení hydroenergetické funkce nádrže. http://uvhk.fce.vutbr.cz/software.php. URL: http://uvhk.fce.vutbr.cz/software.php. (software)
Detail

ŠIKULA, O.; PLÁŠEK, J.: CalA 4.0; Calculation Area verze 4.0 Education (CalA 4.0e). http://www.fce.vutbr.cz/TZB/sikula.o/cala_uvod.html. URL: http://www.fce.vutbr.cz/TZB/sikula.o/cala_uvod.html. (software)
Detail

MIKULKA, J.; SEDLÁK, J.: prosvětlovací stůl; Prosvětlovací stůl. FEKT, UTEE. (funkční vzorek)
Detail

MIKULKA, J.; SEDLÁK, J.: Utrazvukový tester; Modul akustické kontroly automobilových filtrů. FEKT, UTEE. (funkční vzorek)
Detail

MIKULKA, J.; SEDLÁK, J.: Modul plynové zkoušky; Modul pro plynovou zkoušku automobilového filtru. FEKT, UTEE. (funkční vzorek)
Detail

KOVALENKO, A.; YADAV, R.; VALA, M.; WEITER, M.: Organic_magnetic_solar; Organický solární článek s uspořádanými feritovými nanočásticemi. Laboratoř čistých prostor CMV. (funkční vzorek)
Detail

MACKŮ, R.; ŠKARVADA, P.: Solar Hybrid System Isolation Co; Solar Hybrid System Isolation Converter v. 1.7. Laboratoře NEE s.r.o.. URL: http://www.ufyz.feec.vutbr.cz/veda-a-vyzkum/produkty/2013/solar-hybrid-system-isolation-converter-v-1-7. (funkční vzorek)
Detail

MACKŮ, R.; ŠICNER, J.: Voltage Profile Unit v. 4.0; Voltage Profile Unit v. 4.0. laboratoře Baumann Technologie CZ, a.s.. URL: http://www.ufyz.feec.vutbr.cz/veda-a-vyzkum/produkty/2013/voltage-profile-unit-v-4-0. (funkční vzorek)
Detail

MACKŮ, R.; VONDRA, M.: Alkaline Fuel Cell Autonomous Po; Alkaline Fuel Cell Autonomous Power Supply v. 2.0. laboratoře Baumann Technologie CZ, a.s.. URL: http://www.ufyz.feec.vutbr.cz/veda-a-vyzkum/produkty/2013/alkaline-fuel-cell-autonomous-power-supply-v-2-0. (funkční vzorek)
Detail

KOKTAVÝ, P.; KOKTAVÝ, B.; TRČKA, T.; ŠTOUDEK, R.; MACKŮ, R.: Kapacitní senzor; Kapacitní senzor pro měření elektromagnetické emise. Ústav Fyziky, FAST, VUT v Brně, http://fyzika.fce.vutbr.cz/pub/Kapacitni%20senzor%202013.pdf. URL: http://fyzika.fce.vutbr.cz/pub/Kapacitni%20senzor%202013.pdf. (funkční vzorek)
Detail

SOBOTKOVÁ, V.; DUMBROVSKÝ, M.: Mapa 3 Nový Jičín; Identifikace míst povodňového ohrožení v modelovém území okresu Nový Jičín. Ministerstvo zemědělství, Územní odbor, Ústřední pozemkový úřad Moravskoslezský kraj, Husova 13, 741 01 Nový Jičín. (specializovaná mapa s odborným obsahem)
Detail

SOBOTKOVÁ, V.; DUMBROVSKÝ, M.: Mapa 2 Nový Jičín; Prostorová lokalizace míst potenciálního vzniku efemerních rýh v modelovém území okresu Nový Jičín. Ministerstvo zemědělství, Územní odbor, Ústřední pozemkový úřad Moravskoslezský kraj, Husova 13, 741 01 Nový Jičín. (specializovaná mapa s odborným obsahem)
Detail

MARTON, D.; STARÝ, M.: LRMsoft; LRMsoft - generátor umělých měsíčních průtoků. http://uvhk.fce.vutbr.cz/software.php. URL: http://uvhk.fce.vutbr.cz/software.php. (software)
Detail

SOBOTKOVÁ, V.; DUMBROVSKÝ, M.: Mapa 1 Nový Jičín; Prostorová lokalizace erozního smyvu při R40 v okrese Nový Jičín. Ministerstvo zemědělství, Územní odbor, Ústřední pozemkový úřad Moravskoslezský kraj, Husova 13, 741 01 Nový Jičín. (specializovaná mapa s odborným obsahem)
Detail

DOKOUPIL, J.: 54th IEEE Conference on Decision and Control. Osaka (15.12.2015)
Detail

http://www.isvav.cz/projectDetail.do?rowId=EE2.3.30.0039