Ing.

Oldřich Ševeček

Ph.D.

FSI, ÚMTMB OLMMM – odborný asistent

+420 54114 2857
sevecek@fme.vutbr.cz

Odeslat VUT zprávu

Ing. Oldřich Ševeček, Ph.D.

Publikace

  • 2020

    RUBEŠ, O.; MACHŮ, Z.; ŠEVEČEK, O.; HADAŠ, Z. Crack Protective Layered Architecture of Lead-Free Piezoelectric Energy Harvester in Bistable Configuration. SENSORS, 2020, roč. 20, č. 20, s. 1-18. ISSN: 1424-8220.
    Detail | WWW | Plný text v Digitální knihovně

    STACHIV, I.; GAN, L.; KUO, CH.Y.; ŠITTNER, P.; ŠEVEČEK, O. Mass Spectrometry of Heavy Analytes and Large Biological Aggregates by Monitoring Changes in the Quality Factor of Nanomechanical Resonators in Air. ACS Sensors, 2020, roč. 5, č. 7, s. 2128-2135. ISSN: 2379-3694.
    Detail | WWW

    ŠEVEČEK, O.; HANÁK, J.; MAJER, Z.; DRDLÍK, D.; CHLUP, Z.; KOTOUL, M. Prediction of the ceramic foam structure failure using a detailed finite element model. In Advances in Fracture and Damage Mechanics XVIII. Key Engineering Materials (print). 1. Švýcarsko: Trans Tech Publications Ltd, 2020. s. 222-227. ISBN: 9783035715866. ISSN: 1013-9826.
    Detail | WWW

    HOFER, A.; WALTON, R.; ŠEVEČEK, O.; MESSING, G.; BERMEJO, R. Design of damage tolerant and crack-free layered ceramics with textured microstructure. Journal of the European Ceramic Society, 2020, roč. 2020, č. 40, s. 427-435. ISSN: 0955-2219.
    Detail | WWW

    ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T.; HRSTKA, M. Crack kinking out of interface of two orthotropic materials under combined thermal/mechanical loading. Theoretical and Applied Fracture Mechanics, 2020, roč. 105, č. 1, s. 1-18. ISSN: 0167-8442.
    Detail | WWW

    ŠEVEČEK, O.; PAPŠÍK, R.; MAJER, Z.; KOTOUL, M. Influence of the cell geometry on the tensile strength of open-cell ceramic foams. In 9th International Conference Materials Structure & Micromechanics of Fracture (MSMF9). Procedia Structural Integrity. Itálie: Elsevier, 2020. s. 553-558. ISSN: 2452-3216.
    Detail | WWW | Plný text v Digitální knihovně

    MACHŮ, Z.; ŠEVEČEK, O.; HADAŠ, Z.; KOTOUL, M. Modeling of electromechanical response and fracture resistance of multilayer piezoelectric energy harvester with residual stresses. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2020, roč. 31, č. 19, s. 2261-2287. ISSN: 1530-8138.
    Detail | WWW

  • 2019

    TOFEL, P.; MACHŮ, Z.; CHLUP, Z.; HADRABA, H.; DRDLÍK, D.; ŠEVEČEK, O.; MAJER, Z.; HOLCMAN, V.; HADAŠ, Z. Novel layered architecture based on Al2O3/ZrO2/BaTiO3 for SMART piezoceramic electromechanical converters. European Physical Journal-Special Topics, 2019, roč. 228, č. 7, s. 1575-1588. ISSN: 1951-6355.
    Detail | WWW

    ŠEVEČEK, O.; BERTOLLA, L.; CHLUP, Z.; ŘEHOŘEK, L.; MAJER, Z.; MARCIÁN, P.; KOTOUL, M. Modelling of cracking of the ceramic foam specimen with a central notch under the tensile load. Theoretical and Applied Fracture Mechanics, 2019, roč. 100, č. 1, s. 242-250. ISSN: 0167-8442.
    Detail | WWW

  • 2018

    ŠEVEČEK, O.; MAJER, Z.; MARCIÁN, P.; BERTOLLA, L.; KOTOUL, M. Computational Analysis of Crack-Like Defects Influence on the Open Cell Ceramic Foam Tensile Strength. In Advances in Fracture and Damage Mechanics XVII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2018. s. 271-276. ISBN: 9783035713503. ISSN: 1013-9826.
    Detail | WWW

    MASINI, A.; ŠIŠKA, F.; ŠEVEČEK, O.; CHLUP, Z.; DLOUHÝ, I. Elastic properties of multi-layered ceramic systems for SOCs. International Journal of Applied Ceramic Technology, 2018, roč. 2017, č. 1, s. 370-379. ISSN: 1744-7402.
    Detail | WWW

    BERTOLLA, L.; CHLUP, Z.; TATARKO, P.; HANZEL, O.; ŠEVEČEK, O.; ROUPCOVÁ, P.; DLOUHÝ, I. Preparation and characterization of novel environmentally friendly Al2O3/SiO2/CaO ceramic foams. Ceramics International, 2018, roč. 44, č. 1, s. 19063-19069. ISSN: 0272-8842.
    Detail | WWW

    MAJER, Z.; ŠEVEČEK, O.; MACHŮ, Z.; ŠTEGNEROVÁ, K.; KOTOUL, M. Optimization of design parameters of fracture resistant piezoelectric vibration energy harvester. In Key Engineering Materials. Key Engineering Materials (print). 774. Trans Tech Publications Ltd, 2018. s. 416-422. ISBN: 9783035713503. ISSN: 1013-9826.
    Detail | WWW

    MACHŮ, Z.; MAJER, Z.; ŠEVEČEK, O.; ŠTEGNEROVÁ, K.; HADAŠ, Z. Electro-mechanical analysis of a multilayer piezoelectric cantilever energy harvester upon harmonic vibrations. In MATEC Web of Conferences. MATEC Web of Conferences. 210. EDP Sciences, 2018. s. 1-6. ISSN: 2261-236X.
    Detail | WWW

    MACHŮ, Z.; ŠEVEČEK, O.; MAJER, Z.; HADAŠ, Z.; KOTOUL, M. Optimization of the electro-mechanical response of the multilayer piezoelectric energy harvester. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. Brno: Brno University of Technolgy, 2018, 2018. s. 143-148. ISBN: 978-80-214-5543-6.
    Detail | WWW

    LEGUILLON, D.; MARTIN, É.; ŠEVEČEK, O.; BERMEJO, R. What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation?. INTERNATIONAL JOURNAL OF FRACTURE, 2018, roč. 212, č. 1, s. 89-103. ISSN: 0376-9429.
    Detail | WWW

    MARTIN, É.; LEGUILLON, D.; ŠEVEČEK, O.; BERMEJO, R. Understanding the tensile strength of ceramics in the presence of small critical flaws. Engineering Fracture Mechanics, 2018, roč. 201, č. 1, s. 167-175. ISSN: 0013-7944.
    Detail | WWW

  • 2017

    ŠEVEČEK, O.; MAJER, Z.; KOTOUL, M. INFLUENCE OF CERAMIC FOAM PARAMETERS ON THE FRACTURE BEHAVIOUR UPON THE TENSILE TEST. In Engineering Mechanics 2017. Engineering mechanics 2014. Praha: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, DOLEJSKOVA 5, PRAGUE 8, 182 00, CZECH REPUBLIC, 2017. s. 862-865. ISBN: 978-80-214-5497-2. ISSN: 1805-8248.
    Detail

    BOCCACCINI, D.; ŠEVEČEK, O.; FRANDSEN, H.; DLOUHÝ, I.; MOLIN, S.; HJELM, J.; CANNIO, M.; HENDRIKSEN, P. Determination of the bonding strength in solid oxide fuel cells’ interfaces by Schwickerath crack initiation test. Journal of the European Ceramic Society, 2017, roč. 2017, č. 37, s. 3565-3578. ISSN: 0955-2219.
    Detail

    KOTOUL, M.; SKALKA, P.; ŠEVEČEK, O.; BERTOLLA, L.; MERTENS, J.;MARCIÁN, P.; CHAWLA, N. Crack bridging modelling in Bioglass ®based scaffolds reinforced by poly-vinyl alcohol/ microfibrillated cellulose composite coating. Mechanics of Materials, 2017, roč. 110, č. 1, s. 16-28. ISSN: 0167-6636.
    Detail | WWW

    ŠEVEČEK, O.; NAVRÁTIL, P.; PAPŠÍK, R.; SKALKA, P.; KOTOUL, M. Influence of the Ceramic Foam Structure Irregularity on the Tensile Response. In Materials Structure and Micromechanics of Fracture VIII. Solid State Phenomena. Švýcarsko: Trans Tech Publications, 2017. s. 161-164. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.
    Detail

    ŠEVEČEK, O.; MAJER, Z.; BERTOLLA, L.; CHLUP, Z.; KOTOUL, M. Fracture-Mechanics Behaviour of Ceramic Foam with Macroscopic Stress Concentrator upon the Tensile Test. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (web). Švýcarsko: Trans Tech Publications, 2017. s. 99-102. ISBN: 978-3-0357-1168-4. ISSN: 1662-9795.
    Detail

  • 2016

    BOCCACCINI, D.; ŠEVEČEK, O. et al. Investigation of the bonding strength and bonding mechanisms of SOFCs interconnector-electrode interfaces. MATERIALS LETTERS, 2016, roč. 2015, č. 162, s. 250-253. ISSN: 0167-577X.
    Detail | WWW

    ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Modelling of edge crack formation and propagation in ceramic laminates using the stress–energy coupled criterion. Engineering Fracture Mechanics, 2016, roč. 167, č. 2016, s. 45-55. ISSN: 0013-7944.
    Detail | WWW

    ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Assessment of crack-related problems in layered ceramics using the finite fracture mechanics and coupled stress-energy criterion. In Procedia Structural Integrity. Procedia Structural Integrity. Itálie: Elsevier, 2016. s. 2014-2021. ISSN: 2452-3216.
    Detail | WWW

  • 2015

    ŠEVEČEK, O.; LEGUILLON, D.; PROFANT, T.; KOTOUL, M. Validity of the Finite Fracture Mechanics based Asymptotic Analysis for Predictions of Crack Deflection in Thin Layers of Ceramic Laminates. In Advances in Fracture and Damage Mechanics XIII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2015. s. 237-240. ISBN: 978-3-03835-235-8. ISSN: 1013-9826.
    Detail

    CHANG, Y.; BERMEJO, R.; ŠEVEČEK, O.; MESSING, G. Design of alumina-zirconia composites with spatially tailored strength and toughness. Journal of the European Ceramic Society, 2015, roč. 2015, č. 35, s. 631-640. ISSN: 0955-2219.
    Detail

    LEGUILLON, D.; ŠEVEČEK, O.; MARTIN, É.; BERMEJO, R. Edge cracking due to a compressive residual stress in ceramic laminates. COMPTES RENDUS MECANIQUE, 2015, roč. 2015, č. 343, s. 192-198. ISSN: 1631-0721.
    Detail

    ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Understanding the edge crack phenomenon in ceramic laminates. Frattura ed Integrita Strutturale, 2015, roč. 9, č. 34, s. 362-370. ISSN: 1971-8993.
    Detail | WWW | Plný text v Digitální knihovně

    LEGUILLON, D.; MARTIN, É.; ŠEVEČEK, O.; BERMEJO, R. Application of the coupled stress-energy criterion to predict the fracture behaviour of layered ceramics designed with internal compressive stresses. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2015, roč. 2015, č. 54, s. 94-104. ISSN: 0997-7538.
    Detail

  • 2014

    KLUSÁK, J.; HRSTKA, M.; PROFANT, T.; KREPL, O.; ŠEVEČEK, O.; KOTOUL, M. The influence of the first non-singular stress terms on crack initiation direction in an orthotropic bi-material plate. Theoretical and Applied Fracture Mechanics, 2014, roč. 71, č. 2014, s. 67-75. ISSN: 0167-8442.
    Detail

    ŠEVEČEK, O.; BERMEJO, R.; PROFANT, T.; KOTOUL, M. Influence of the T-stress on the crack bifurcation phenomenon in ceramic laminates. In 20th European Conference on Fracture (ECF 2014). Procedia Materials Science. Procedia Materials Science Volume 3. Trondheim, Norsko: Elsevier, 2014. s. 1062-1067. ISBN: 9781632669094. ISSN: 2211-8128.
    Detail

    GUIMARAES, J.; GARCIA, E.; OSENDI, M.; ŠEVEČEK, O.; BERMEJO, R. Effect of aging on the onset of cracks due to redistribution of residual stresses in functionally graded environmental barrier coatings of mullite /ZrO2. COMPOSITES PART B-ENGINEERING, 2014, roč. 2014, č. 61, s. 199-205. ISSN: 1359-8368.
    Detail

    PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M.; HRSTKA, M.; MARCIÁN, P. An effect of the first non-singular term of the Williams asymptotic expansion to the stability of the bi- material orthotropic notch. In Materials Structure & Micromechanics of Fracture VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. s. 745-748. ISSN: 1013-9826.
    Detail

    DAMBORSKÝ, P.; ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Criterion for crack kinking out of the interface of two orthotropic layers subjected to thermal and mechanical loading. In Materials Structure and Micromechanics of Fracture VII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2014. s. 169-172. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
    Detail

    MARCIÁN, P.; VALÁŠEK, J.; HRSTKA, M.; MAJER, Z.; ŠEVEČEK, O.; PROFANT, T.; DLOUHÝ, I.; FLORIAN, Z. Computational Modeling of Porous Ceramics with Bioactive Layer. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. s. 378-381. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
    Detail

    DAMBORSKÝ, P.; ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Crack Deflection from the Interface between Two Orthotropic Materials-Effect of Higher Order Terms in Asymptotic Analysis. In Advances in Fracture and Damage Mechanics XII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2014. s. 157-160. ISBN: 978-3-03785-830-1. ISSN: 1013-9826.
    Detail

    HRSTKA, M.; PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M. A Stability Criterion of an Orthotropic Bi-Material Notch Based on the Strain Energy Density. In Engineering Mechanics 2014. 1. Svratka: BUT, 2014. s. 232-235. ISBN: 978-80-214-4871-1.
    Detail

  • 2013

    PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M. On the direction of a crack initiated from an orthotropic bi-material notch composed of materials with non-uniform fracture mechanics On the direction of a crack initiated from an orthotropic bi-material notch composed of materials with non- uniform fracture mechanics properties. Key Engineering Materials (print), 2013, roč. 525- 526, č. 1, s. 545-548. ISSN: 1013- 9826.
    Detail

    ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T.; BERMEJO, R. Influence of the residual stresses on the crack deflection in ceramic laminates. 2013.
    Detail

    ŠEVEČEK, O.; BERMEJO, R.; KOTOUL, M. Prediction of the crack bifurcation in layered ceramics with high residual stresses. Engineering Fracture Mechanics, 2013, roč. 2013, č. 108, s. 120-138. ISSN: 0013- 7944.
    Detail

    PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; HRSTKA, M.; KOTOUL, M. An energetic criterion for a micro-crack of finite length initiated in orthotropic bi- material notches. Engineering Fracture Mechanics, 2013, roč. 110, č. 2013, s. 396-409. ISSN: 0013- 7944.
    Detail

  • 2012

    ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T. Effect of higher order asymptotic terms on the competition between crack penetration and debond at a bimaterial interface between aligned orthotropic materials. Engineering Fracture Mechanics, 2012, roč. 80, č. 1, s. 28-51. ISSN: 0013- 7944.
    Detail

    KOTOUL, M.; ŠEVEČEK, O.; PROFANT, T. Modelling of Crack Bifurcation in Laminar Ceramics with Large Compressive Stress. Key Engineering Materials (print), 2012, roč. 488- 489, č. 2012, s. 130-133. ISSN: 1013- 9826.
    Detail

    KLUSÁK, J.; PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. Crack propagation from bi-material notches - matched asymptotic procedure. Key Engineering Materials (print), 2012, roč. 488- 489, č. 2012, s. 416-419. ISSN: 1013- 9826.
    Detail

    ŠEVEČEK, O.; BERMEJO, R.; KOTOUL, M. Crack path prediction in layered ceramics designed with residual stresses. In Proceedings of the 4th International Conference on CRACK PATHS (CP 2012). 2012. s. 87-98. ISBN: 9788895940441.
    Detail

    BERMEJO, R.; CHLUP, Z.; ŠESTÁKOVÁ, L.; ŠEVEČEK, O.; DANZER, R. Strategies to Optimize the Strength and Fracture Resistance of Ceramic Laminates. In Mechanical Properties and Performance of Engineering Ceramics and Composites VII. kniha. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. s. 163-174. ISBN: 9781118205884.
    Detail

    BERMEJO, R.; CHLUP, Z.; ŠESTÁKOVÁ, L.; ŠEVEČEK, O.; DANZER, R. Layered ceramics with internal compressive stresses to improve strength and toughness. Nürnberg: 2012.
    Detail

    KOTOUL, M.; ŠEVEČEK, O.; VYSLOUŽIL, T. Crack Growth in Ceramic Laminates with Strong Interfaces and Large Compressive Residual Stresses. Theoretical and Applied Fracture Mechanics, 2012, roč. 2012 (61), č. 1, s. 40-50. ISSN: 0167- 8442.
    Detail

  • 2009

    KOTOUL, M.; ŠEVEČEK, O.; PROFANT, T. Analysis of multiple cracks in thin coating on orthotropic substrate under mechanical and residual stresses. Engineering Fracture Mechanics, 2009, roč. 77, č. 2, s. 229-248. ISSN: 0013- 7944.
    Detail

    KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O.; KLUSÁK, J. Computational model of the transition of crack across the sharp material interface. In 12th International Conference on Fracture. 2009. s. 1-10. ISBN: 9781617382277.
    Detail

  • 2008

    KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O. Analysis of Multiple Cracks in Thin Coating on Orthotropic Substrate. In Multilevel Approach to Fracture of Materials, Components and Structures. 1. Czech Republic: VUTIUM Brno, 2008. s. 170-177. ISBN: 9781617823190.
    Detail

    PROFANT, T.; KOTOUL, M.; ŠEVEČEK, O. Stronger and weaker singularity of an inclined crack terminating at the orthotropic bimaterial interface. In 17th European conference on fracture. Brno: VITIUM, 2008. s. 170-170. ISBN: 9781617823190.
    Detail

  • 2007

    ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Crack propagation criteria for the crack terminating on the interface of a thin orthotropic layer and an orthotropic substrate. In Engineering Mechanics 2007. Prague: Institute of thermomechanics Academy of science of the Czech Republic, 2007. s. 271-272. ISBN: 978-80-87012-06- 2.
    Detail

    ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Řešení problému přemostění trhliny v tenké ortotropní vrstvě s vrcholem na rozhraní ortotropního substrátu. In Applied Mechanics 2007. Ediční středisko VŠB. Ostrava: VŠB Technická universita Ostrava, 2007. s. 207-208. ISBN: 978-80-248-1389- 9.
    Detail

    PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. The Analysis of the Stress and Displacement Field Near the Surface Crack Tip Terminating Perpendicular to the Interface Between Two Orthotropic Materials. Materials Science Forum, 2007, roč. 567, č. 1, s. 137-140. ISSN: 0255- 5476.
    Detail

    KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O.; KREJČÍŘ, M. a kol. Modeling of cracks crossing an interface between dissimilar elastic anisotropic materials. Materials Science Forum, 2007, roč. 567, č. 1, s. 17-22. ISSN: 0255- 5476.
    Detail

    PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M.; VYSLOUŽIL, T. Dislocation tri-material solution in the analysis of bridged crack in anisotropic bimaterial half- space. INTERNATIONAL JOURNAL OF FRACTURE, 2007, roč. 147, č. 4, s. 199-217. ISSN: 0376- 9429.
    Detail

    PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. Calculation of k-factor and t- stress for cracks in anisotropic bimaterials. Engineering Fracture Mechanics, 2007, roč. 75, č. 11, s. 3707-3726. ISSN: 0013- 7944.
    Detail

    KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O.; KREJČÍŘ, M. Solution methods for general stress concentrators in anisotropic heterogeneous media. Key Engineering Materials (print), 2007, roč. 348- 349, č. 1, s. 677-680. ISSN: 1013- 9826.
    Detail

  • 2006

    KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O. Calculation of K-factor and T- stress for crack at anisotropic bimaterials. In Fracture of Nano and Engineering Materials and Structures. Holandsko: Springer, 2006. s. 879-879. ISBN: 1-4020-4971- 4.
    Detail

    PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. ANALÝZA SINGULARITY NAPĚTÍ U TRHLIN NA ROZHRANÍ DVOU ORTOTROPNÍCH MATERIÁLŮ. In Computational Mechanics. Hrad Nečtiny: University of West Bohemia in Pilsen, 2006. s. 483-490. ISBN: 80-7043-477- 5.
    Detail

    ŠEVEČEK, O.; PROFANT, T. Problematika obecných koncentrátorů na rozhraní dvou anisotropních materiálů. In Víceúrovňový design pokrokových materiálů 2005. Brno: Ústav fyziky materiálů AVČR, 2006. s. 155-162. ISBN: 80-239-8271- 0.
    Detail

    ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T. Výpočet zobecněného součinitele intensity napětí pro trhlinu kolmou na rozhraní dvou anisotropních materiálů. In Aplikovaná mechanika 2006. Srní: 2006. s. 93-94. ISBN: 80-7043-441- 4.
    Detail

    PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. STRESS SINGULARITY AT AN SEMI- INFINITE CRACK PERPENDICULAR TO THE INTERFACE BETWEEN TWO ORTHOTROPIC MATERIALS. In Dynamika tuhých a deformovatelných těles 2006. Ústí nad Labmem: Univerzita J.E. Purkyně, 2006. s. 175-182. ISBN: 80-7044-782- 6.
    Detail

    ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T. Konstrukce fundamentálního řešení pro dislokaci v anisotropním bimateriálovém tělese pomocí MKP. In Engineering mechanics 2006. Svratka: 2006. s. 350-351. ISBN: 80-86246-27- 2.
    Detail

    ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Problematika přechodu trhlin přes rozhraní dvou anisotropních materiálů. In Computational mechanics 2006. Nečtiny: University of West Bohemia, 2006. s. 601-608. ISBN: 80-7043-477- 5.
    Detail

    PROFANT, T.; KOTOUL, M.; ŠEVEČEK, O. Analysis of Edge Bridged Crack in Bimaterial Anisotropic Half- Space. Key Engineering Materials (print), 2006, roč. 324, č. 9, s. 1143-1143. ISSN: 1013- 9826.
    Detail

  • 2005

    ŠEVEČEK, O.; KOTOUL, M. Řešení obecných koncentrátorů napětí v anisotropních prostředích. In Víceúrovňový design pokrokových materiálů 2006. Brno: 2005. s. 215-222. ISBN: 80-239-6145- 4.
    Detail

*) Citace publikací se generují jednou za 24 hodin.