Ing.

Miroslav Jopek

Ph.D.

FSI, ÚST OTTKP – vedoucí odboru

+420 54114 2632
jopek@fme.vutbr.cz

Odeslat VUT zprávu

Ing. Miroslav Jopek, Ph.D.

Publikace

  • 2023

    SMYK, E.; GIL,P..; JOPEK, M. PIV measurements of axisymmetric synthetic jet velocity. In AIP Conference Proceedings. AIP Conference Proceedings. American Institute of Physics Inc., 2023. s. 020021-1 (020021-7 s.)ISSN: 1551-7616.
    Detail | WWW

  • 2022

    KUNČICKÁ, L.; KOCICH, R.; KAČOR, P.; JAMBOR, M.; JOPEK, M. Influence of Sub Structure Development within Rotary Swaged Al–Cu Clad Conductors on Skin Effect during Transfer of Alternating Current. Materials, 2022, roč. 15, č. 2, s. 1-19. ISSN: 1996-1944.
    Detail | WWW | Plný text v Digitální knihovně

    ZOUHAR, J.; GABRIŠ, A.; JOPEK, M.; PODANÝ, K. Determination of the Johnson-Cook Material Model of EN AW 6061-T6511 with evaluation for grooving machining. Experimental Stress Analysis 2022 Book of Extended Abstract. first. Prague: Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Mechanics, Biomechanics and Mechatronics, Technická 4, 160 00 Prague 6, 2022. s. 152-153. ISBN: 978-80-01-07010-9.
    Detail

    VILIŠ, J.; POKORNÝ, Z.; ZOUHAR, J.; JOPEK, M. Ballistic Resistance of Composite Materials Tested by Taylor Anvil Test. Manufacturing TECHNOLOGY, 2022, roč. 22, č. 5, ISSN: 1213-2489.
    Detail | WWW

    SMYK, E.; GIL,P.; DANČOVÁ, P.; JOPEK, M. The PIV Measurements of Time-Averaged Parameters of the Synthetic Jet for Different Orifice Shapes. Applied Sciences - Basel, 2022, roč. 13, č. 1, ISSN: 2076-3417.
    Detail | WWW

  • 2021

    ŘIHÁČEK, J.; PODANÝ, K.; ŘIHÁČEK, V.; PETERKOVÁ, E.; CÍSAŘOVÁ, M.; JOPEK, M.; LIDMILA, Z. Výzkumná zpráva OP PIK Inovace: Výzkum a vývoj nové generace dešťových kanalizačních vpustí. Brno: ÚST FSI VUT v Brně, 2021. s. 1-78.
    Detail

    JOPEK, M.; FOREJT, M.; HARANT, M. Mechanical properties of aluminium alloys at high strain rate. MM Science Journal, 2021, roč. 2021, č. 2, s. 4505-4511. ISSN: 1803-1269.
    Detail | WWW

    JOPEK, M. Determination of Carbon Steel Dynamic Properties. Manufacturing TECHNOLOGY, 2021, roč. 21, č. 4, s. 479-482. ISSN: 1213-2489.
    Detail | WWW | Plný text v Digitální knihovně

    KUNČICKÁ, L.; JOPEK, M.; KOCICH, R.; DVOŘÁK, K. Determining Johnson-Cook Constitutive Equation for Low-Carbon Steel via Taylor Anvil Test. Materials, 2021, roč. 14, č. 17, s. 1-15. ISSN: 1996-1944.
    Detail | WWW | Plný text v Digitální knihovně

  • 2004

    FOREJT, M.; JOPEK, M.; BUCHAR, J. Estabilishing the dynamic mechanical properties of materials by the hopkinson test method. Acta Mechanica Slovaca, 2004, roč. 8, č. 2B, s. 93-98. ISSN: 1335- 2393.
    Detail

  • 2003

    FOREJT, M., JOPEK, M., PERNICA, Z., KRÁSNY, D. Zjišťování rázových sil a napětí při Taylorově testu. In 8th International Conference TECHNOLÓGIA 2003. Bratislava: SjF STU v Bratislave, 2003. s. 118- 1 (118-4 s.)ISBN: 80-227-1935- 8.
    Detail

    FOREJT, M., JOPEK, M. Modelling the Taylor Anvil Test. In 11th International Scientific Conference CO-MAT- TECH 2003. Trnava: Slovak University of Technology in bratislava, 2003. s. 193-201. ISBN: 80-227-1949- 8.
    Detail

  • 2002

    FOREJT, M., BUCHAR, J., JOPEK, M., KREJČÍ, J. Parametric numerical studies of the taylor test. In 11th International Metallusgical& Materials Conference METAL 2002. Ostrava: TANGER, s.r.o. Ostrava, 2002. s. 80/ 1 (80/7 s.)ISBN: 80-85988-73- 9.
    Detail

    FOREJT, M., KREJČÍ, J., JOPEK, M., BUCHAR, J., PERNICA, Z. Dynamic models of formed materials. Acta Mechanica Slovaca, 2002, roč. 6, č. 2, s. 21-26. ISSN: 1335- 2393.
    Detail

    FOREJT, M., KREJČÍ, J., JOPEK, M. Optimalizace parametrů dynamických modelů tvářených materiálů. In Form 2002. Brno: Brno university of technology, 2002. s. 37 ( s.)ISBN: 80-214-2162- 2.
    Detail

    FOREJT, M., KREJČÍ, J., JOPEK, M. Optimalizace parametrů dynamických modelů tvářených materiálů. In 6th International conference FORM 2002, Forming technology, tools and machines. Brno: Brno University of Technology, 2002. s. 37 ( s.)ISBN: 80-214-2162- 2.
    Detail

  • 2001

    JOPEK, M., PERNICA, Z., FOREJT, M. Chování materiálů za vyšších teplot a rychlostí deformace. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2001, roč. 279/ 2001, č. 72, s. 85 ( s.)ISSN: 1429- 6055.
    Detail

    JOPEK, M., FOREJT, M. Modelování mechanického chování uhlíkové oceli TRISTAL. In Juniormat´ 01. Brno: ÚMI FSI VUT Brno a ČSNMT, 2001. s. 176 ( s.)ISBN: 80-214-1885- 0.
    Detail

    PERNICA, Z., JOPEK, M., FOREJT, M. Zkoušení materiálů pomocí Hopkinsonova Testu. In Juniormat´ 01. Brno: ÚMI FSI VUT Brno a ČSNMT, 2001. s. 127 ( s.)ISBN: 80-214-1885- 0.
    Detail

    FOREJT, M., JOPEK, M., KREJČÍ, J. Effect of deformation changes on mikrostrukture of forming steels. In Metal 2001: Proceedings of the 10th international metalurgical conference, symposium B. Ostrava: TANGER s.r.o. Ostrava, 2001. s. 21/ 1 (21/6 s.)ISBN: 80-85988-56- 9.
    Detail

    FOREJT, M., JOPEK, M., KREJČÍ, J., KREJČOVÁ, J. Deformation of steel for applications during taylor test in dependence on impact velocity. In 7th International conference Technológia 2001. Bratislava: STU Bratislava, 2001. s. 748-751. ISBN: 80-227-1567- 0.
    Detail

    JOPEK, M. Modeling mechanical properties of carbon steels at high strain rates. In 3rd international conference of PhD students. Miskolc, Hungary: University of Miskolc, 2001. s. 211 ( s.)ISBN: 963-661-480- 6.
    Detail

    FOREJT, M., KREJČÍ, J., JOPEK, M., BUCHAR, J. Relations between structure of material, strain rate and numerical simulations. In 9th International Scientific Conference CO-MAT- TECH 2001. Bratislava: STU Bratislava, 2001. s. 64-69. ISBN: 80-227-1591- 3.
    Detail

  • 2000

    JOPEK, M.; BUCHAR, J.; FOREJT, M. Plastic deformation at real compression rates. In 8th international conference on METAL FORMING 2000. Akademia Górniczo-Hutnicza, Kraków, Pola: A.A.BALKEMA/Rotterdam/Brookfield/ 2000, 2000. s. 729 ( s.)ISBN: 90-5809-157- 0.
    Detail

    FOREJT, M., JOPEK, M., BUCHAR, J. Chování tvářené oceli při vysokých rychlostech deformace. In 5th International conference Forming Technology, Tools and Machines - FORM 2000. BRNO, Congres Centre Brno Co: Brno University of Technology, 2000. s. 101-106. ISBN: 80-214-1661- 0.
    Detail

    FOREJT, M., JOPEK, M., BUCHAR, J. Constitutive equations for the behaviour of BCC steels at high strain rates. In 9th International Metallurgical Conference METAL 2000. OSTRAVA , Hotel ATOM, Czech Republic: TANGER s.r.o. Ostrava, 2000. s. B1-214/ 1 (B1-214/6 s.)ISBN: 80-85988-48- 8.
    Detail

    BUCHAR, J.; FOREJT, M.; JOPEK, M. Evaluation of constitutive relations for high strain rate behaviour using the Taylor test. Journal de Physique IV, 2000, roč. 10, č. 9, s. Pr9- 75 (Pr9-80 s.)ISSN: 1155- 4339.
    Detail

    FOREJT, M., BUCHAR, J., JOPEK, M. High strain rate compression loading of BCC steels. In 8.medzinárodná vedecká konferencia CO-MAT- TECH 2000. STU Materiálovotechnologická fakulta v T: STU v Bratislave, Vazovova 5, 2000. s. 45-50. ISBN: 80-227-1413- 5.
    Detail

    BUCHAR, J., FOREJT, M., JOPEK, M. Evaluation of constitutive relations for high strain rate behaviour using the Taylor test. 2000, roč. 10, č. 9, s. 75 ( s.)
    Detail

  • 1999

    FOREJT, M.; BUCHAR, J.; JOPEK, M. Plastické deformace při vysokých rychlostech deformace. In 6th International conference TECHNOLÓGIA´ 99. Bratislava, Slovenská republika: ES STU Bratislava, 1999. s. 286-289. ISBN: 80-227-1255- 8.
    Detail

*) Citace publikací se generují jednou za 24 hodin.