doc. Ing.

Jana Horníková

Ph.D.

FSI, ÚMTMB OMPM – docent

+420 54114 2866, +420 54114 2877
hornikova@fme.vutbr.cz

Odeslat VUT zprávu

doc. Ing. Jana Horníková, Ph.D.

Publikace

  • 2023

    KIANICOVÁ, M.; DLOUHÝ, I.; ŠANDERA, P.; HORNÍKOVÁ, J.; POKLUDA, J. Dynamic Fracture Characteristics of High-Strength Steel. Defect and Diffusion Forum, 2023, roč. 422, č. 1, s. 45-49. ISSN: 1012-0386.
    Detail | WWW

  • 2021

    POKLUDA, J.; DLOUHÝ, I.; KIANICOVÁ, M.; ČUPERA, J.; HORNÍKOVÁ, J.; ŠANDERA, P. Temperature Dependence of Fracture Characteristics ofVariously Heat-Treated Grades of Ultra-High-Strength Steel:Experimental and Modelling. Materials, 2021, roč. 14, č. 19, s. 1-28. ISSN: 1996-1944.
    Detail | WWW | Plný text v Digitální knihovně

  • 2020

    ŠANDERA, P.; HORNÍKOVÁ, J.; KIANICOVÁ, M.; DLOUHÝ, I.; POKLUDA, J. Determination of Ramberg-Osgood approximation for estimation of low- temperature fracture toughness. In Fracture and Damage Mechanics. AIP Conference Proceedings. AIP Publishing LLC., 2020. s. 020024-1 (020024-6 s.)ISBN: 978-0-7354-4045-6. ISSN: 1551-7616.
    Detail

    KIANICOVÁ, M.; ŠANDERA, P.; HORNÍKOVÁ, J.; KOTTFER, D.; POKLUDA, J. The Effect of Prior Surface Roughness on Fatigue Life of Nitrided Specimens. In Metallography XVII. Defect and Diffusion Forum. Švýcarsko: TransTech Publication, 2020. s. 271-276. ISBN: 978-3-0357-1612-2. ISSN: 1662-9507.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P. Influence of Nonlinear Transformation of Data on Verification Lefort’s Formula for the Critical Crack Length. International Journal of Advances in Mechanical and Civil Engineering, 2020, roč. 7, č. 2, s. 6-11. ISSN: 2394-2827.
    Detail | WWW

  • 2019

    OHNIŠŤOVÁ, P.; PÍŠKA, M.; DLUHOŠ, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; PETRENEC, M. A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading. In Procedia Structural Integrity. Procedia Structural Integrity. Elsevier, 2019. s. 469-474. ISSN: 2452-3216.
    Detail | WWW

    HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S.; POKLUDA, J. Study on Generalization of Lefort’s Approach toCriticalCrackLength. In Advances in Fracture and Damage Mechanics XVIII. Key Engineering Materials (print). Trans Tech Publications Ltd, 2019. s. 153-158. ISBN: 9783035715866. ISSN: 1013-9826.
    Detail | WWW

    OHNIŠŤOVÁ, P.; PÍŠKA, M.; DLUHOŠ, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; PETRENEC, M. A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading. In Materials Structure & Micromechanics of Fracture (MSMF9). 1. Brno: Vutium, 2019. s. 124-124. ISBN: 978-80-214-5760-7.
    Detail

    OHNIŠŤOVÁ, P.; PÍŠKA, M.; PETRENEC, M.; DLUHOŠ, J.; HORNÍKOVÁ, J.; ŠANDERA, P. Fatigue Life of 7475-T7351 Aluminum After Local Severe Plastic Deformation Caused by Machining. Materials, 2019, roč. 12, č. 21, s. 1-23. ISSN: 1996-1944.
    Detail | WWW | Plný text v Digitální knihovně

    ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P.; VOJTEK, T.; KIANICOVÁ, M.; POKLUDA, J. Local and equivalent stress intensity factors for tortuous cracks under remote mode II loading. Theoretical and Applied Fracture Mechanics, 2019, roč. 101, č. 1, s. 35-45. ISSN: 0167-8442.
    Detail | WWW

    HORNÍKOVÁ, J.; ŠANDERA, P. Influence of Nonlinear Transformation of Data on Verification Lefort’S Formula for the Critical Crack Length. In Proceedings of ISER International Conference. Khandagiri, India: Institute for Technology and Research, 2019. s. 12-17. ISBN: 978-93-89732-10-8.
    Detail

  • 2018

    KIANICOVÁ, M.; POKLUDA, J.; HORNÍKOVÁ, J.; ŠANDERA, P. The Original Method for Assessment of Residual Stresses in Reinforced Surface Layers. In 26th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger, 2018. s. 1315-1320. ISBN: 978-80-87294-79-6.
    Detail

    PÍŠKA, M.; OHNIŠŤOVÁ, P.; HORNÍKOVÁ, J. Progressive milling technologies, surface quality and fatigue properties of the aluminum alloy 7475-T7351. In 18th International Conference on New Trends in Fatigue and Fracture. 1. Lisboa: Tecnico Lisboa, 2018. s. 205-208. ISBN: 978-989-20-8548-7.
    Detail

    POKLUDA, J.; HORNÍKOVÁ, J.; PÍŠKA, M.; ŠANDERA, P. Fatigue Behaviour of Powder Steel Specimens Made by Selective Laser Melting. In 26th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger, 2018. s. 979-984. ISBN: 978-80-87294-79-6.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S.; POKLUDA, J. Stress Intensity Factors for Cracks Emanating from a Notch under Shear-Mode Loading. In Key Engineering Materials: Advances in Fracture and Damage Mechanics XVII. Key Engineering Materials (print). Trans Tech Publications, 2018. s. 48-53. ISBN: 9783035713503. ISSN: 1013-9826.
    Detail

  • 2017

    ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P. Stress intensity factors for rough cracks loaded in mode II. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Trans Tech Publications, 2017. s. 310-313. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail

    SHAYANFARD, P.; HELLER, L.; DOSTÁLOVÁ, D.; ŠANDERA, P.; ŠITTNER, P.; HORNÍKOVÁ, J.; ALARCON, E.; FROST, M.; SEDLÁK, P.; POKLUDA, J. Effect of Martensitic Transformation on Local Stresses and Strains at a Notch of Cyclically Loaded Superelastic NiTi Ribbon. Rhodes, Greece: ICF, 2017.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P. Modelling of Tortuous Crack Fronts in Shear Loading Mode. Proceedings of 5th International Conference on Mechanical Engineering, Materials Science and Civil Engineering. Kuala Lumpur: X-Academy, 2017. s. 14-15.
    Detail

    ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P.; VOJTEK, T.; POKLUDA, J. Determination of local stress intensity factors at microstructurally tortuous crack fronts under remote mode II loading. In Procedia Structural Integrity. Procedia Structural Integrity. Elsevier, 2017. s. 254-261. ISSN: 2452-3216.
    Detail

    TRUBAČOVÁ, P.; PÍŠKA, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Analysis of Selective Laser Melting Process Parameters Effect on Mechanical and Material Properties for Stainless Steel 316L. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. s. 579-582. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail

    LEJČEK, P.; ŠANDERA, P.; HORNÍKOVÁ, J.; ŘEHÁK, P.; POKLUDA, J. Grain Boundary Segregation of Elements of Groups 14 and 15 and its Consequences for Intergranular Cohesion of Ferritic Iron. Journal of Materials Science, 2017, roč. 52, č. 1, s. 5822-5834. ISSN: 1573-4803.
    Detail

    PÍŠKA, M.; TRUBAČOVÁ, P.; HORNÍKOVÁ, J. Analysis of powder steel material, laser sintering technology and machining on surface parameters and fatigue. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2017, roč. 48, č. 7, s. 1-11. ISSN: 0933-5137.
    Detail

    PÍŠKA, M.; OHNIŠŤOVÁ, P.; HORNÍKOVÁ, J.,HERVOCHES, CH. A Study of Progressive Milling Technology on Surface Topography and Fatigue Properties of the High Strength Aluminum Alloy 7475-T7351. In Proceedings of the 17th International Conference on New Trends in Fatigue and Fracture. Springer. Basel: Springer International Publishing AG, 2017. s. 7-19. ISBN: 978-3-319-70364-0.
    Detail | WWW

    SHAYANFARD, P.; ŠANDERA, P.; HORNÍKOVÁ, J.; PETRUŠKA, J.; ŠITTNER, P.; POKLUDA, J. NiTi Self-expanding Vascular Stent Configuration and Biomedical Interaction with Artery: Finite Element Analysis. In Solid State Phenomena. Solid State Phenomena. Švýcarsko: Trans Tech Publications, Switzerland, 2017. s. 366-369. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.
    Detail

    ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P. Shear Mode Stress Intensity Factors for Serrated Crack Fronts. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (web). 1. Switzerland: Trans Tech Publications, 2017. s. 214-217. ISBN: 9783035711684. ISSN: 1662-9795.
    Detail

  • 2016

    TRUBAČOVÁ, P.; PÍŠKA, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Analysis of Selective Laser Melting Process Parameters Effect on Mechanical and Material Properties for Stainless Steel 316L. Solid State Phenomena, 2016, roč. 258, č. 1, s. 579-582. ISSN: 1662-9779.
    Detail | WWW

    ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P. Stress Intensity Factors for Rough Cracks Loaded in Mode II. Materials Structure & Micromechanics of Fracture 8. 1. Brno: VUTIUM, 2016. s. 218-218. ISBN: 978-80-214-5357-9.
    Detail

    SLÁMEČKA, K.; ŠESTÁK, P.; VOJTEK, T.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. A fractographic study of bending/torsion fatigue failure in metallic materials with protective surface layers. Advances in Materials Science and Engineering, 2016, roč. 2016, č. 1, s. 1-6. ISSN: 1687-8434.
    Detail | WWW | Plný text v Digitální knihovně

    PÍŠKA, M.; TRUBAČOVÁ, P.; HORNÍKOVÁ, J. On the Analysis of Powder Steel Material, Laser Sintering Technology and Machining on Surface Parameters and Fatigue. NT2F16 16th International Conference on New Trends in Fatigue and Fracture. 1. Zagreb: University of Zagreb, Croatia, 2016. s. 31-32. ISBN: 978-953-7738-39- 6.
    Detail

    HORNÍKOVÁ, J.; ŽÁK, S.; ŠANDERA, P. Numerical Fracture Analysis of Compact Tension Shear (CTS) Specimens with Tortuous Crack Fronts. In Advances in Fracture and Damage Mechanics. Key Engineering Materials (print). Key Engineering MAterials. Trans Tech Publications, 2016. s. 77-80. ISBN: 978-3-03835-541-0. ISSN: 1013-9826.
    Detail

    LEJČEK, P.; ŠANDERA, P.; HORNÍKOVÁ, J.; POKLUDA, J.; GODEC, M. On the Segregation Behavior of Tin and Antimony at Grain Boundaries of Polycrystalline bcc Iron. Applied Surface Science, 2016, roč. 363, č. 1, s. 140-144. ISSN: 0169-4332.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P. Study of Fracture Behaviour of Doped Polycrystalline Fe Alloy. Abstract proceeding book - ECBA. Seminyak: Academic Fora, 2016. s. 13-13. ISBN: 978-969-683- 2.
    Detail

    PÍŠKA, M.; TRUBAČOVÁ, P.; HORNÍKOVÁ, J.; ŠANDERA, P.; BOIVIE, K. A Study of Selective Laser Melting Technology on the Ultra-High Strength Tool Steel Use—Quality, Mechanical Properties and Fatigue. In Applied Mechanics, Behavior of Materials, and Engineering Systems. Switzerland: Springer International Publishing, 2016. s. 67-86. ISBN: 978-3-319-41467-6.
    Detail | WWW

  • 2015

    HORNÍKOVÁ, J.; ŠANDERA, P.; VOJTEK, T.; POKLUDA, J. Description of Fatigue Crack Propagation under Mixed-mode II+III in Terms of J-integral. Key Engineering Materials (print), 2015, roč. 627, č. 1, s. 145-148. ISSN: 1013-9826.
    Detail

    VOJTEK, T.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; HOHENWARTER, A.; PIPPAN, R. Analysis of fatigue crack propagation under mixed mode II + III in ARMCO iron. INTERNATIONAL JOURNAL OF FATIGUE, 2015, roč. 76, č. 1, s. 47-52. ISSN: 0142-1123.
    Detail

    ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Verification of Linear Dependence of Plastic Zone Size on J-integral for Mixed- mode Loading. Applied Mechanics and Materials, 2015, roč. 751, č. 1, s. 15-20. ISSN: 1660-9336.
    Detail

    SLÁMEČKA, K.; ŠESTÁK, P.; VOJTEK, T.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Biaxial Fatigue Fractures of Case-Hardened and High-Temperature-Coatings- Protected Specimens. Powder Metallurgy Progress, 2015, roč. 15, č. special, s. 145-149. ISSN: 1335-8987.
    Detail | WWW

  • 2014

    ŠANDERA, P.; POKLUDA, J.; SCHÖBERL, T.; HORNÍKOVÁ, J.; ČERNÝ, M. Modeling Load-displacement Curve and Pop- in Effect in Nanoindentation Tests. Procedia Materials Science, 2014, roč. 3, č. 1, s. 1111-1116. ISSN: 2211-8128.
    Detail

    VOJTEK, T.; POKLUDA, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Description of Fatigue Crack Growth under Modes II, III and II+III in Terms of J- integral. Procedia Materials Science, 2014, roč. 3, č. 1, s. 835-840. ISSN: 2211-8128.
    Detail

    SLÁMEČKA, K.; NĚMEC, K.; ČELKO, L.; HORNÍKOVÁ, J.; POKLUDA, J.; ŠVEJCAR, J. Bending Fatigue Behaviour of Diffusion and Thermal Barrier Coating Systems. In Key Engineering Materials. Key Engineering Materials (print). Zurich-Durnten, Switzerland: Trans Tech Publications Ltd, 2014. s. 716-719. ISBN: 9783037859346. ISSN: 1013-9826.
    Detail | WWW

    HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S.; POKLUDA, J. Specimens for Simultaneous Mode II, III and II+III Fatigue Crack Propagation: Elasto-Plastic Solution of Crack Tip Stress- Strain Field. In 11TH INTERNATIONAL FATIGUE CONGRESS. Advanced Materials Research. 1. Melbourne: Trans Tech Publications, 2014. s. 1585-1590. ISBN: 978-3-03835-008- 8. ISSN: 1022- 6680.
    Detail

  • 2013

    SLÁMEČKA, K.; POKLUDA, J.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; OBRTLÍK, K. Fatigue Life of Cast Inconel 713LC with/without Protective Diffusion Coating under Bending, Torsion and their Combination. Engineering Fracture Mechanics, 2013, roč. 110, č. 1, s. 459-467. ISSN: 0013- 7944.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S.; POKLUDA, J. Elasto-plastic Solution of Stress-strain Field at the Crack Tip in Special Specimens for Mode II, III and II+ III Fatigue Crack Propagation. Euromat 2013. 1. Sevilla: Barceló Congresos, 2013. s. 617-617.
    Detail

    HORNÍKOVÁ, J.; ŽÁK, S.; ŠANDERA, P. K-calibration of Special Specimens for Mode II, III and II+ III Crack Growth. Engineering Fracture Mechanics, 2013, roč. 110, č. 1, s. 430-437. ISSN: 0013- 7944.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Modelling Load-displacement Curve and the Onset of Pop-in during Nanoindentation Tests. Nanomaterials 2013. 1. Cancun: Zing Conferences, 2013. s. 50-50.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S. Elasto-Plastic Solution of Stress-Strain Field at the Crack Tip in Special Specimens for Mode II, III and II+ III Fatigue Crack Propagation. Materials Structure & Micromechanics of Fracture (MSMF7). 1. Brno: Vutium, 2013. s. 194-194. ISBN: 978-80-214-4739- 4.
    Detail

  • 2012

    HORNÍKOVÁ, J.; ŽÁK, S.; ŠANDERA, P. K-calibration of Special Specimen for Mode II, III and II+ III Crack Growth. 8th Meeting of the TC2 on Micromechanisms (ESIS). 1. Oxford: Mansfield College, 2012. s. 35-35.
    Detail

    VOJTEK, T.; POKLUDA, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; HOHENWARTER, A.; PIPPAN, R. Equivalent K-factor for Near-threshold Mode II+ III Fatigue Crack Growth in ARMCO Iron. Oxford: 2012.
    Detail

    VOJTEK, T.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; SLÁMEČKA, K.; PIPPAN, R.; HOHENWARTER, A. Near-threshold Fatigue Crack Propagation under Mixed-mode II+ III in ARMCO Iron. In 19th European Conference on Fracture. Kazan: 2012. s. 188-193. ISBN: 978-5-905576-18- 8.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Comparison of Solutions of Stress Field based on Hertzian and Combined Numerical- Crystallographic Approaches beneath Nanoindenter. In Advances in Fracture and Damage Mechanics X. Key Engineering Materials (print). 1. 2012. s. 395-398. ISBN: 978-3-03785-218- 7. ISSN: 1013- 9826.
    Detail

    LEJČEK, P.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; JENKO, M. Solute Segregation at 46.8deg(111) Twist Grain Boundary of a Phosphorus Doped Fe-2.3% V Alloy. Surface Science, 2012, roč. 606, č. 1, s. 258-262. ISSN: 0039- 6028.
    Detail

    POKLUDA, J.; OBRTLÍK, K.; SLÁMEČKA, K.; HORNÍKOVÁ, J.; HUTAŘOVÁ, S.; KIANICOVÁ, M.; PODRÁBSKÝ, T. Fatigue Crack Paths in Cast Inconel 713LC with/ without Al Diffusion Coating under Various Loading and Temperature Conditions. In Proceedings of the 4th International Conference on Crack Paths. 2012. s. 967-975. ISBN: 9788895940441.
    Detail

  • 2011

    HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Stress Intensity Factors for Surface Semi- elliptical Crack in Cylindrical Specimen under Combined Torsion and Axial Compression. Key Engineering Materials, 2011, roč. 452- 453, č. 1, s. 673-676. ISSN: 1013- 9826.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; PANTĚLEJEV, L.; POKLUDA, J. Geometrical Shielding Produced by Intergranular Crack-tip Branching in Fe-V- P Alloy. Key Engineering Materials, 2011, roč. 465, č. 1, s. 574-577. ISSN: 1013- 9826.
    Detail

    VOJTEK, T.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Near- threshold Fatigue Crack Propagation under Modes II and III in ARMCO Iron. Berlin: 2011.
    Detail

  • 2010

    HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Linear-Elastic and Elastoplastic Mode II and III Crack Tip Stress- Strain Fields in Cylindrical Specimens with Circumferential Crack. Key Engineering Materials, 2010, roč. 417- 418, č. 1, s. 321-324. ISSN: 1013- 9826.
    Detail

    ŠANDERA, P.; POKLUDA, J.; HORNÍKOVÁ, J.; VLACH, B.; LEJČEK, P.; JENKO, M. Fracture of Polycrystalline Fe-2.3%V-0.12% P Alloy. Engineering Fracture Mechanics, 2010, roč. 77, č. 1, s. 385-392. ISSN: 0013- 7944.
    Detail

  • 2009

    HOLÁŇ, L.; PIPPAN, R.; POKLUDA, J.; HORNÍKOVÁ, J.; HOHENWARTER, A.; SLÁMEČKA, K. Near- Threshold Propagation of Mode II and Mode III Cracks. In Crack Paths. Vicenza, Italy: University of Parma, 2009. s. 585-592. ISBN: 0000000000000.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J.; LEJČEK, P. Phosphorus-Induced Quasi-Brittle Fracture of Fe-2.3% V-0.12% P Alloy. In Fractography. 1. Košice: IMR SAS, 2009. s. 9-16. ISBN: 978-80-968543-8- 7.
    Detail

  • 2008

    POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; ŠANDERA, P.; HORNÍKOVÁ, J. Assessment of Extrinsic Crack Tip Shielding in Austenitic Steel near Fatigue Threshold. In Fracture and Damage Mechanics. 1. Seoul: TransTech Publication, 2008. s. 49-52. ISBN: 978-0-87849-369- 2.
    Detail

    POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; KOZÁK, V.; HORNÍKOVÁ, J.; ŠANDERA, P. Microstructural Interpretation of Effective Fatigue Threshold of Structural Steel. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. s. 2216-2219. ISBN: 9781617823190.
    Detail

    POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; ŠANDERA, P.; HORNÍKOVÁ, J. Assessment of Extrinsic Crack Tip Shielding in Austenitic Steel near Fatigue Threshold. Key Engineering Materials, 2008, roč. 385- 387, č. 1, s. 49-52. ISSN: 1013- 9826.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale Modelling of Nanoindentation Test in Copper Crystal. Engineering Fracture Mechanics, 2008, roč. 75, č. 12, s. 3755-3762. ISSN: 0013- 7944.
    Detail

    MAJOR, Š.; PAPUGA, J.; HORNÍKOVÁ, J.; POKLUDA, J. Comparison of Fatigue Criteria for Combined Bending- torsion Loading of Nitrided and Virgin Specimens. Strength of Materials, 2008, roč. 40, č. 1, s. 64-66. ISSN: 0556- 171X.
    Detail

  • 2007

    MAJOR, Š.; PAPUGA, J.; HORNÍKOVÁ, J.; POKLUDA, J. Comparison of Fatigue Criteria for Combined Bending- torsion Loading of Nitrided and Virgin Specimens. Brno: Vutium, 2007. s. 148-148.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale Modelling of Nanoindentation Test in Copper Crystal. Brno: Vutium, 2007. s. 45-45.
    Detail

    HORNÍKOVÁ, J.; BURŠÍKOVÁ, V.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale Modelling of Nanoindentation Test in Nickel Crystal. Brno: Vutium, 2007. s. 24-24.
    Detail

    HORNÍKOVÁ, J.; BURŠÍKOVÁ, V.; ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J. On the Relation between Pop- Ins in Nanoindentation Tests and the Ideal Shear Strength. Dar es Salaam: University of Dar es Salaam, 2007. s. o- 88 (o-88 s.)
    Detail

    HORNÍKOVÁ, J.; BURŠÍKOVÁ, V.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale Modelling of Nanoindentation Test in Nickel Crystal. Acta Metallurgica Slovaca, 2007, roč. 13, č. 6, s. 65-69. ISSN: 1335- 1532.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale modelling of nanoindentation test in Cu crystal. Engineering Fracture Mechanics, 2007, roč. 76, č. 1, s. 0-0. ISSN: 0013- 7944.
    Detail

    PILCH, J.; POKLUDA, J.; FLORIAN, Z.; HELLER, L.; ŠANDERA, P.; HORNÍKOVÁ, J. Thermomechanical Properties of Nitinol Wires for Stewart Platform. AT& P journal PLUS, 2007, roč. 2007, č. 1, s. 63-66. ISSN: 1336- 5010.
    Detail

    HORNÍKOVÁ, J.; ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J. Onset of Microplasticity in Copper Crystal during Nanoindentation. Key Engineering Materials (print), 2007, roč. 348- 349, č. 1, s. 801-804. ISSN: 1013- 9826.
    Detail

    POKLUDA, J.; ŠANDERA, P.; OHLÍDAL, M.; ČERNÝ, M.; PILCH, J.; FLORIAN, Z.; SLÁMEČKA, K.; ŠESTÁK, P.; DOLOŽÍLEK, M.; HORNÍKOVÁ, J. Physical Engineering: Research Support of Mechatronic Models. In Simulation Modelling of Mechatronic Systems II. mechatronika. Brno: VUT v Brně, 2007. s. 15-27. ISBN: 978-80-214-3559- 9.
    Detail

  • 2006

    POKLUDA, J.; SLÁMEČKA, K.; HORNÍKOVÁ, J.; ŠANDERA, P. On the Reconstruction of Crack Paths in Biaxial Fatigue. In Fractography 2006. 1. Stará Lesná: ÚMV SAV, 2006. s. 497-500. ISBN: 80-968543-5- 6.
    Detail

    ŠANDERA, P.; HORNÍKOVÁ, J.; POKLUDA, J. On the Correspondence of 2D and 3D Grain Size Statistics in Ultra- fine Grain Materials. S4G. Praha: 2006.
    Detail

    JANOVEC, J.; POKLUDA, J.; JENKO, M.; LEJČEK, P.; VLACH, B.; HORNÍKOVÁ, J. Influence of Phosphorus Enrichment at Grain Boundaries on Energy of Intergranular Fracture in Fe-Si- P Alloys. Surface and Interface Analysis, 2006, roč. 38, č. 4, s. 401-405. ISSN: 0142- 2421.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Computation of Effective Fatigue Thresholds Based on a New Concept of Crack Closure. Key Engineering Materials (print), 2006, roč. 324- 325, č. 1, s. 324-325. ISSN: 1013- 9826.
    Detail

    POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. Low Fatigue Crack Growth Thresholds in ultra- Fine Grained Metallic Materials. Advances in Nanostructured Materials, Processing - Microstructure - Properties (Nanoved06). 1. Stará Lesná: 2006.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Modelling Crack- Tip Shielding Effects in Particle Reinforced Composites. In ECF 16. Alexandroupolis: ESIS, 2006. s. CDROM ( s.)
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Computation of Effective Fatigue Thresholds Based on a New Concept of Crack Closure. In 5th International Conference on Fracture and Damage Mechanics. 1. Harbin: Trans Tech Publications, 2006. s. 803-806. ISBN: 0-87849-413- 8.
    Detail

    POKLUDA, J.; MAJOR, Š.; HORNÍKOVÁ, J. Biaxial Fatigue Life of Plasma- Nitrided and Virgin Specimens. In Životnost materiálů a konstrukcí. 1. Brno: ÚFM AV ČR, 2006. s. 23-27. ISBN: 80-239-6751- 7.
    Detail

  • 2005

    HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Influence of Tempering Temperature on Mechanical Properties of Ultra-High Strength Low- Alloy Steels. In Super- High Strength Steels 05. 1. Rome: AIM & CSM Italy, 2005. s. CD 94_ 1 ( s.)ISBN: 80-214-3085- 0.
    Detail

    POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. Analysis of Roughness-Induced Crack- Tip Shielding in Terms of Size Ratio Effect. Journal of ASTM International, 2005, roč. 2, č. 4, s. 1-15. ISSN: 1546- 962X.
    Detail | WWW

    HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J.; KOTOUL, M. On the Crack Tip Shielding in Particle Reinforced Composites. In 4th International Conference on Fracture and Damage Mechanics. 1. Mallorca, Spain: 2005. s. 509-512. ISBN: 0-9547783-1- 6.
    Detail

    HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. On the Crack Tip Shielding in Particle Reinforced Composites. Materials Science Forum, 2005, roč. 482, č. 0, s. 311-314. ISSN: 0255- 5476.
    Detail

  • 2004

    POKLUDA, J. ŠANDERA, P. HORNÍKOVÁ, J. Statistical Approach to Roughness- Induced Shielding Effects. Fatigue & Fracture of Engineering Materials & Structures, 2004, roč. 27, č. 2, s. 141 ( s.)ISSN: 8756- 758X.
    Detail

  • 2003

    ŠANDERA, P.; POKLUDA, J.; HORNÍKOVÁ, J. 3D Statistical Characteristics of Grain Size in Ultra Fine Grained Ceramics. In Nano 03. Brno: 2003. s. 33 ( s.)ISBN: 80-214-2527- X.
    Detail

    POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. Analysis of Roughness-Induced Shielding in Terms of Size Ratio Effect. In nd International ASTM/ ESIS Symposium on Fatigue and Fracture Mechanics. Tampa, Florida: 2003. s. 62 ( s.)
    Detail

    POKLUDA, J., ŠANDERA, P., HORNÍKOVÁ, J., VLACH, B. Fracture Surfaces in Fe-0.05%C-2.6%Si Alloy Contaminated by Phosphorus. In Fractography 2003. Košice: 2003. s. 358 ( s.)ISBN: 80-968543-2- 1.
    Detail

    POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. 3D Statistical Characteristics of Grain Size in Ultra- Fine Grained Ceramics. In Nano03. Brno: 2003. s. 15 ( s.)ISBN: 80-214-2486- 9.
    Detail

  • 2002

    ŠANDERA, P., HORNÍKOVÁ, J., POKLUDA, J. Simple Calculation of Geometrical Shielding at Intergranular Crack Front by Means of Pyramidal Model. In Fracture Mechanics Beyond 2000, ECF 14. Krakow: EMAS, 2002. s. 383 ( s.)ISBN: -88906-04- 6.
    Detail

    POKLUDA, J., ŠANDERA, P., HORNÍKOVÁ, J. Application of Statistical Concept of Roughness- Induced Crack Closure to Titanium and Aluminium Alloys. In Fatigue 02. Stockholm: EMAS, 2002. s. 2385 ( s.)ISBN: 1-901537-32- 3.
    Detail

  • 2001

    HORNÍKOVÁ, J., ŠANDERA, P., POKLUDA, J. Effective Stress Intensity Factor for Crack of Intergranular Morphology. In Materials Structure & Micromechanics of Fracture (MSMF-3). Brno: Vutium, 2001. s. 737 ( s.)ISBN: 80-214-1892- 3.
    Detail

    POKLUDA, J., ŠANDERA, P., HORNÍKOVÁ, J. Kvantitativní interpretace závislosti rozkmitu prahových hodnot K-faktoru na střední velikosti zrna ARMCO železa. In Degradácia vlastností konštrukčných materiálov únavou. Žilina: ŽU Žilina, 2001. s. 31 ( s.)ISBN: 80-7100-873- 7.
    Detail

    ŠANDERA, P., POKLUDA, J., HORNÍKOVÁ, J. Pyramidal Model of Intergranular Crack Front. In Materials Structure & Micromechanics of Fracture (MSMF-3). Brno: Vutium, 2001. s. 786 ( s.)ISBN: 80-214-1892- 3.
    Detail

    ŠANDERA, P., HORNÍKOVÁ, J., POKLUDA, J. Aproximální výpočet stínícího efektu na čele interkrystalické trhliny pomocí pyramidálního modelu. In Křehký lom. Brno: ÚFM AV ČR, 2001. s. 69 ( s.)
    Detail

  • 2000

    POKLUDA, J., SAXL, I., ŠANDERA, P., PONÍŽIL, P., MATOUŠEK, M., PODRÁBSKÝ, T., HORNÍKOVÁ, J. Real- like Polycrystal with Intergranular Crack. In Euromat 2000. Tours (Francie): Elsevier, 2000. s. 449 ( s.)ISBN: 0-08-042815- 0.
    Detail

    HORNÍKOVÁ, J., ŠANDERA, P., POKLUDA, J. Effective Stress Intensity Factor for the Straight Crack Front with 3D- Ledges. In EUROMAT 99. Muenchen (SRN): Wiley- VCH, 2000. s. 232 ( s.)ISBN: 3-527-30122- 4.
    Detail

    POKLUDA, J., VLACH, B., ŠANDERA, P., JANOVÁ, D., HORNÍKOVÁ, J. Fraktografická podpora interpretace anomálního vztahu lomové a vrubové houževnatosti ultrapevné oceli. In Fractography 2000. Košice: ÚMV SAV, 2000. s. 383 ( s.)ISBN: 80-968468-3- 3.
    Detail

    POKLUDA, J., ŠANDERA, P., HORNÍKOVÁ, J. Statistical Model of Roughness Induced Crack Closure. In Fracture Mechanics: Applications and Challenges, ECF 13. San Sebastian: Elsevier, 2000. s. CD ( s.)
    Detail

  • 1999

    HORNÍKOVÁ, J., POKLUDA, J., ŠANDERA, P. Efektivní součinitel intenzity napětí pro dvojnásobně vyhnutou trhlinu ve Voronoiově mozaice. Inženýrská mechanika - Engineering Mechanics, 1999, roč. 6, č. 2, s. 97 ( s.)ISSN: 1210- 2717.
    Detail

  • 1998

    HORNÍKOVÁ, J., ŠANDERA, P., POKLUDA, J. Stress Intensity Factor of 3D Branched Crack. In Materials Structure & Micromechanics of Fracture (MSMF-2). Brno: Vutium, 1998. s. 57 ( s.)ISBN: 80-214-1181- 3.
    Detail

    ŠANDERA, P., HORNÍKOVÁ, J., POKLUDA, J. Effective Stress Intensity Factor of a Real- Like 3D Intergranular Crack Front. In ECF 12, Fracture from Defects. UK, Sheffield: Elsevier, 1998. s. 811 ( s.)ISBN: 190153703.
    Detail

  • 1997

    HORNÍKOVÁ, J., ŠANDERA, P. Calculation of Effective Value of Stress Intensity Factor of Intergranularly Kinked Crack. In Fractography 97. Košice: Institute of Materials Research SAV, 1997. s. 169 ( s.)ISBN: 80-967814- X.
    Detail

*) Citace publikací se generují jednou za 24 hodin.