Ing.

Jakub Roupec

Ph.D.

FSI – externí pedagog

+420 54114 3136, +420 54114 3216
roupec.j@fme.vutbr.cz

Odeslat VUT zprávu

Ing. Jakub Roupec, Ph.D.

Publikace

  • 2021

    ROUPEC, J.; MICHAL, L.; STRECKER, Z.; KUBÍK, M.; MACHÁČEK, O.; CHOI, H. Influence of clay-based additive on sedimentation stability of magnetorheological fluid. SMART MATERIALS & STRUCTURES, 2021, roč. 30, č. 2, s. 1-9. ISSN: 0964-1726.
    Detail | WWW

  • 2020

    ROUPEC, J.; JENIŠ, F.; STRECKER, Z.; KUBÍK, M.; MACHÁČEK, O. Stribeck Curve of Magnetorheological Fluid within Pin-on-Disc Configuration: An Experimental Investigation. Materials, 2020, roč. 13, č. 20, s. 1-11. ISSN: 1996-1944.
    Detail | WWW | Plný text v Digitální knihovně

  • 2019

    KUBÍK, M.; PAVLÍČEK, D.; MACHÁČEK, O.; STRECKER, Z.; ROUPEC, J. A magnetorheological fluid shaft seal with low friction torque. Smart Materials and Structures, 2019, roč. 1, č. 28, s. 1-11. ISSN: 1361-665X.
    Detail | WWW

    MACHÁČEK, O.; KUBÍK, M.; STRECKER, Z.; ROUPEC, J.; MAZŮREK, I. Design of a frictionless magnetorheological damper with a high dynamic force range. Advances in Mechanical Engineering, 2019, roč. 11, č. 3, s. 1-8. ISSN: 1687-8132.
    Detail | WWW | Plný text v Digitální knihovně

    STRECKER, Z.; KUBÍK, M.; VÍTEK, P.; ROUPEC, J.; PALOUŠEK, D.; ŠREIBR, V. Structured magnetic circuit for magnetorheological damper made by selective laser melting technology. SMART MATERIALS & STRUCTURES, 2019, roč. 28, č. 55016, s. 1-13. ISSN: 0964-1726.
    Detail | WWW

    KUBÍK, M.; ROUPEC, J.; JENIŠ, F.; MAZŮREK, I. The settings of CFD model with magnetorheological fluid and its influence on the results. In Engineering Mechanics 2019, 25th International Conference. Praha: Institute of Thermomechanics of the Czech Academy of Sciences, 2019. s. 223-226. ISBN: 978-80-87012-71-0.
    Detail

    JENIŠ, F.; ROUPEC, J.; ŽÁČEK, J.; KUBÍK, M.; MACHÁČEK, O.; SMILEK, J.; SMILKOVÁ, M.; MAZŮREK, I. Abrasion of Magnetorheological Fluids. In Engineering Mechanics 2019, 25th International Conference. Praha: Institute of Thermomechanics of the Czech Academy of Sciences, 2019. s. 169-172. ISBN: 978-80-87012-71-0.
    Detail

    ROUPEC, J.; STRECKER, Z.; KUBÍK, M.; MACHÁČEK, O.; SMILEK, J.; SMILKOVÁ, M. Stribeck Curves of Selected Magnetorheological Fluids. In Engineering Mechanics 2019, 25th International Conference. Praha: Institute of Thermomechanics of the Czech Academy of Sciences, 2019. s. 323-326. ISBN: 978-80-87012-71-0.
    Detail

  • 2018

    MACHÁČEK, O.; KUBÍK, M.; STRECKER, Z.; ROUPEC, J.; NOVÁK, P.; MAZŮREK, I. Axial and Pressure Thrust Stiffness of Metal Bellows for Vibration Isolators. In MATEC Web of Conferences. MATEC Web of Conferences. 2018. s. 1-5. ISSN: 2261-236X.
    Detail | WWW

    KUBÍK, M.; MACHÁČEK, O.; ROUPEC, J.; STRECKER, Z.; NOVÁK, P.; MAZŮREK, I. Transient magnetic model of magnetorheological damper and its experimental verification. In ICMME 2017. MATEC Web of Conferences. MATEC web of Conferences, 2018. s. 1-5. ISSN: 2261-236X.
    Detail

    LAŠTŮVKOVÁ, M.; SMILEK, J.; VLACHOVÁ, K.; OHAREK, L.; MACHÁČEK, O.; ROUPEC, J. Preparation of magnetorheological fluids and effect of additives on their stability. Book of Abstracts of 32nd Conference of The European Colloid and Interface Society - ECIS2018. Narodna in univerzitetna knjižnica, Ljubljana. Ljubljana, Slovenia: Narodna in univerzitetna knjižnica, Ljubljana, 2018. s. 224-224. ISBN: 978-961-6756-90-7.
    Detail

    SMILEK, J.; LAŠTŮVKOVÁ, M.; VLACHOVÁ, K.; OHAREK, L.; KARGEROVÁ, A.; MACHÁČEK, O.; ROUPEC, J. Sedimentation analysis of magnetorheological fluids stabilized by amphiphilic compounds by analytical centrifuge. Book of Abstracts of 32nd Conference of The European Colloid and Interface Society - ECIS2018. Narodna in univerzitetna knjižnica, Ljubljana. Ljubljana, Slovinsko: ECIS, 2018. ISBN: 978-961-6756-90-7.
    Detail

    LAŠTŮVKOVÁ, M.; SMILEK, J.; MACHÁČEK, O.; ROUPEC, J. Study on Stability of Magnetorheological Fluids Stabilized by Surface Active Agents. Proceedings 10th Anniversary International Conference on Nanomaterials - Research and Application October 17th - 19th 2018. 1st Edition, 2018. Keltickova 62, 710 00 Ostrava, Czech Republic, EU: TANGER Ltd., Ostrava, 2018. s. 75-75. ISBN: 978-80-87294-85-7.
    Detail

    STRECKER, Z.; ROUPEC, J.; MAZŮREK, I.; MACHÁČEK, O.; KUBÍK, M. Influence of response time of magnetorheological valve in Skyhook controlled three-parameter damping system. Advances in Mechanical Engineering, 2018, roč. 10, č. 11, s. 1-8. ISSN: 1687-8140.
    Detail | WWW | Plný text v Digitální knihovně

    VÍTEK, P.; STRECKER, Z.; ROUPEC, J. DESIGN OF FAST MAGNETORHEOLOGICAL DAMPER USING SELECTIVE LASER MELTING TECHNOLOGY. In ENGINEERING MECHANICS 2018. Engineering Mechanics 2018. Praha: Institute of theoretical and applied mechanics of the Czech academy of Sciences, 2018. s. 905-908. ISBN: 978-80-86246-88-8. ISSN: 1805-8256.
    Detail | WWW

    MACHÁČEK, O.; KUBÍK, M.; ROUPEC, J.; STRECKER, Z.; MAZŮREK, I. MICRO-FLUIDIC SYSTEM WITH GROOVED POLE PIECES OF MAGNETIC CIRCUIT. In ENGINEERING MECHANICS 2018. Engineering Mechanics 2018. 24th INTERNATIONAL CONFERENCE. Prague: Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, 2018. s. 521-524. ISBN: 978-80-86246-88-8. ISSN: 1805-8256.
    Detail

    KWON, S. H.; JUNG, H. S.; CHOI, H. J.; ROUPEC, J.; STRECKER, Z. Effect of octahedral typed iron oxide particles on magnetorheological behavior of carbonyl iron dispersion. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2018, roč. 555, č. 1, s. 685-690. ISSN: 0927-7757.
    Detail | WWW

    SVOBODOVÁ, Z.; KUPČÍK, R.; SMĚLÁ, D.; ROUPEC, J.; MACHÁČEK, O.; NOVÁKOVÁ, L.; BÍLKOVÁ, Z. ELECTROMAGNET FOR CAPTURE OF MAGNETIC BEADS FROM LARGE VOLUME INTO MICROFLUIDIC CHAMBRE CHIP. In CECE 2018. 15th Internation Interdisciplinary Meeting on Bioanalysis. Brno: Institute of Analytical Chemistry of the CAS, 2018. s. 286-289. ISBN: 978-80-904959-5-1.
    Detail

  • 2017

    KUBÍK, M.; MACHÁČEK, O.; ROUPEC, J.; STRECKER, Z.; MAZŮREK, I. Design and testing of magnetorheological valve with fast force response time and great dynamic force range. SMART MATERIALS & STRUCTURES, 2017, roč. 26, č. 4, s. 1-10. ISSN: 0964-1726.
    Detail | WWW

    ROUPEC, J.; MAZŮREK, I.; STRECKER, Z.; KUBÍK, M.; MACHÁČEK, O. TENSILE STRENGTH OF PURE IRON SAMPLES MANUFACTURED BY SELECTIVE LASER MELTING METHOD. In ENGINEERING MECHANICS 2017. Praha: Institute of Thermomechanics Academy of Sciences of the Czech Republic, 2017. s. 830-833. ISBN: 978-80-214-5497-2.
    Detail

    STRECKER, Z.; STRMISKA, T.; ROUPEC, J.; KUBÍK, M.; MACHÁČEK, O. DESIGN OF FAST MAGNETORHEOLOGICAL DAMPER USING SOFT MAGNETIC COMPOSITES. In ENGINEERING MECHANICS 2017. DOLEJSKOVA 5, PRAGUE 8, 182 00, CZECH REPUBLIC: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, DOLEJSKOVA 5, PRAGUE 8, 182 00, CZECH REPUBLIC, 2017. s. 934-937. ISBN: 978-80-214-5497-2.
    Detail

    ROUPEC, J.; BERKA, P.; MAZŮREK, I.; STRECKER, Z.; KUBÍK, M.; MACHÁČEK, O., ANDANI, M. Taheri. A novel method for measurement of MR fluid sedimentation and its experimental verification. SMART MATERIALS & STRUCTURES, 2017, roč. 26, č. 10, s. 1-13. ISSN: 0964-1726.
    Detail | WWW

    KUBÍK, M.; MACHÁČEK, O.; STRECKER, Z.; ROUPEC, J.; MAZŮREK, I. Dynamic viscosity of commercially available magnetorheological fluids. In 23rd International Conference ENGINEERING MECHANICS 2017. 2017. s. 538-541. ISBN: 978-80-214-5497-2.
    Detail

  • 2016

    ROUPEC, J.; MAZŮREK, I.; STRECKER, Z.; KUBÍK, M.; MACHÁČEK, O. Temperature dependence of magnetorheological fluid yield stress and Bingham viscosity. In Engineering Mechanics 2016. Engineering mechanics 2014. Praha: Academy of Science of the Czech Republic, v.v.i., 2016. s. 498-501. ISBN: 978-80-87012-59- 8. ISSN: 1805-8248.
    Detail

    STRECKER, Z.; ČÍPEK, P.; ROUPEC, J.; MACHÁČEK, O.; KUBÍK, M. Testing of Car Suspension With Fast MR Damper, Controlled by Modified Groundhook Algorithm. In Engineering Mechanics 2016. Engineering mechanics 2014. First edition. Prague: Institute of Thermomechanics Academy of Sciences of the Czech Republic, v.v.i., 2016. s. 526-529. ISBN: 978-80-87012-59- 8. ISSN: 1805-8248.
    Detail

    MACHÁČEK, O.; KUBÍK, M.; MAZŮREK, I.; STRECKER, Z.; ROUPEC, J. Frictionless Bellows Unit Connected with the Magnetorheological Valve. In ENGINEERING MECHANICS 2016. First edition, 2016. Praha: Institute of Thermomechanics Academy of Sciences of the Czech Republic, 2016. s. 354-357. ISBN: 978-80-87012-59- 8.
    Detail

    KUBÍK, M.; MACHÁČEK, O.; STRECKER, Z.; ROUPEC, J.; MAZŮREK, I. Hydraulic resistance of magnetorheological damper viscous bypass gap. In Engineering Mechanics 2016. Engineering mechanics 2014. first edition. Praha: Institute of Thermomechanics Academy of Sciences of the Czech Republic, 2016. s. 330-333. ISBN: 978-80-87012-59- 8. ISSN: 1805-8248.
    Detail

  • 2015

    STRECKER, Z.; ROUPEC, J.; MAZŮREK, I.; KLAPKA, M. Limiting factors of the response time of the magnetorheological damper. INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2015, roč. 47, č. 2, s. 541-550. ISSN: 1383-5416.
    Detail | WWW

    STRECKER, Z.; MAZŮREK, I.; ROUPEC, J.; KLAPKA, M. Influence of MR damper response time on semiactive suspension control efficiency. MECCANICA, 2015, roč. 50, č. 8, s. 1949-1959. ISSN: 0025-6455.
    Detail | WWW

    STRECKER, Z.; MAZŮREK, I.; ROUPEC, J.; MACHÁČEK, O.; KUBÍK, M.; KLAPKA, M. Design of magnetorheological damper with short time response. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2015, roč. 26, č. 14, s. 1951-1958. ISSN: 1045-389X.
    Detail

    KUBÍK, M.; MAZŮREK, I.; ROUPEC, J. Decreasing of sliding friction in hydraulic piston damper. In Engineering mechanics 2015. Prague: 2015. s. 170-171. ISBN: 978-80-86246-42- 0.
    Detail

  • 2014

    STRECKER, Z.; ROUPEC, J.; KUBÍK, M.; FRIEDEL, D. Experimental evaluation of MR damper time response on modified Groundhook algorithm efficiency. In Engineering Mechanics 2014. 1st. 2014. s. 600-603. ISBN: 978-80-214-4871-1.
    Detail

  • 2013

    DLUGOŠ, J.; ROUPEC, J.; STRECKER, Z.; MAZŮREK, I. Problems of FEM Simulation of Magnetorheological Clutch' s Magnetic Circuit. In Engineering Mechanics 2013. 19th international Conference. Praha: IT ASCR, 2013. s. 29-30. ISBN: 978-80-87012-46- 8.
    Detail

    ROUPEC, J.; KUBÍK, M.; MAZŮREK, I.; STRECKER, Z. Problems of FEM Analysis of Magnetic Circuit. In Mechatronics 2013 - Recent Technological and Scientific Advances. London: Springer, 2013. s. 299-305. ISBN: 978-3-319-02294- 9.
    Detail

    MAZŮREK, I.; ROUPEC, J.; KLAPKA, M.; STRECKER, Z. Load and rheometric unit for the test of magnetorheological fluid. MECCANICA, 2013, roč. 48, č. 3, s. 631-641. ISSN: 0025- 6455.
    Detail

  • 2012

    ROUPEC, J.; MAZŮREK, I.; STRECKER, Z.; KLAPKA, M. The Behavior of the MR Fluid During Durability Test. Journal of Physics: Conference Series, 2012, roč. 412, č. 1, s. 1-8. ISSN: 1742-6588.
    Detail | WWW

  • 2011

    ROUPEC, J.; MAZŮREK, I.; STRECKER, Z. Changing the behavior of MR fluids during long term operation. In Engineering Mechanics 2011. 17th international Conference. Brno: IT ASCR, 2011. s. 519-522. ISBN: 978-80-87012-33- 8.
    Detail

    ROUPEC, J.; MAZŮREK, I. Stability of magnetorheological effect during long term operation. In Mechatronics. Berlin Heidelberg: Springer- Verlag, 2011. s. 561-567. ISBN: 978-3-642-23243- 5.
    Detail

  • 2010

    KLAPKA, M.; MAZŮREK, I.; ROUPEC, J. Radial flexible bearings suitable stiffness estimation. MECCANICA, 2010, roč. 46, č. 2, s. 293-392. ISSN: 0025-6455.
    Detail | WWW

  • 2009

    ROUPEC, J.; MAZŮREK, I.; KLAPKA, M.; ČÍŽ, P. Identification of MR Fluids properties in Mechatronic Damping Elements. In Recent Advances in Mechatronics 2008 - 2009. Berlin, Heidelberg: Springer- Verlag Berlin Heidelberg, 2009. s. 115-120. ISBN: 978-3-642-05021- 3.
    Detail

    MAZŮREK, I.; KLAPKA, M.; ROUPEC, J. Noise Reduction of the Differential Sleeve Bearing. Engineering Mechanics, 2009, roč. 16, č. 2, s. 93-102. ISSN: 1802- 1484.
    Detail

  • 2008

    ROUPEC, J.; MAZŮREK, I. THE SOLUTION OF CAN BUS INCOMPATIBILTY. In 31. mezinárodní konference TD 2008 - DIAGON 2008 - Sborník přednášek. Academia Centrum UTB, Mostní 5139, Zlín: Academia centrum UTB ve Zlíně, 2008. s. 60-65. ISBN: 978-80-7318-707- 1.
    Detail

    KLAPKA, M.; ROUPEC, J. Roller bearing fatigue test with help of CAN bus and internet. In 49. Mezinárodní konference kateder částí a mechanismů strojů. Plzeň: Západočeská univerzita v Plzni, 2008. s. 129-132. ISBN: 978-80-7043-718- 6.
    Detail

    KLAPKA, M.; ROUPEC, J.; MAZŮREK, I. Evaluation Method of Sleeve Bearing Noise from Vibrations Data. In International Conference on Fascinating Advancements in Mechanical Engineering Proceedings. Mepco Engg. College - 626005, Sivakasi, Virudhunagar district, Tamilnadu, India: Mepco Schlenck Engineering College Sivakasi, 2008. s. 483-489. ISBN: 978-81-907108-0- 0.
    Detail

  • 2007

    ROUPEC, J.; PALOUŠEK, D. ZAŘÍZENÍ PRO VAKUOVÉ LITÍ DO SILIKONOVÝCH FOREM. In Konference diplomových prací 2007. Brno: 2007. s. 1-5. ISBN: 978-80-214-3406- 6.
    Detail

*) Citace publikací se generují jednou za 24 hodin.