Course detail

Competence in Electrical Engineering

FSI-VE0Acad. year: 2020/2021

The subject "Professional Competence in Electrical Engineering" (VE0) is intended for students of FME BUT in the Institute of Automation and Informatics.
After passing the course and the relevant exams, the course will enable to acquire qualification according to Decree 50/1978 Coll. in the sense of §4 to §6.
The content of the course is consistently based on currently valid legislation.

Language of instruction

Czech

Number of ECTS credits

4

Mode of study

Not applicable.

Learning outcomes of the course unit

The output of the study is to obtain the corresponding certificate according to §4 to §6 of the decree. 50/1978 Coll., Whereby the student acquires appropriate competencies for work with low-voltage electrotechnical equipments.

Prerequisites

Prerequisites are based on the relevant sections of Decree 50/1978 Coll., Where the conditions (eg length of experience, education, etc.) for obtaining individual eligibility clauses are set.

Co-requisites

Co-requisites are not expected in the course.

Planned learning activities and teaching methods

The course is taught in the form of lectures, which are an explanation of the basic principles and theory of the discipline. Teaching is complemented by exercises, where the theoretical knowledge of the lectures is verified. Where possible, lectures will be organized for practitioners and field trips to companies dealing with activities related to the subject matter.

Assesment methods and criteria linked to learning outcomes

Předmět je vyučován formou přednášek, cvičení a předpokládá se vykonání zkoušky. Přednášky jsou nepovinné, ale doporučuje se je navštěvovat. Cvičení je povinné (předpokládá se 100% účast, v případě nedodržení jednotlivé případy řeší vyučující). Cvičení bude ukončeno zápočtem. Tento vychází ze závěrečné zkoušky. Na závěr semestru budou studenti vykonávat zkoušku písemnou (test) a ústní před komisí, která bude zaměřena na získání § 4 až 6 podle vyhl. 50/1978 Sb. Hodnocení je uspěl nebo neuspěl, je třeba získat k hodnocení uspěl 90% správných odpovědí v testu a kladné hodnocení z ústní části.

Course curriculum

Not applicable.

Work placements

If internships are organized by the institute, participation is possible after approval. The same applies to student mobility events organized by FME or BUT.

Aims

Learning outcomes of the course unit the aim of the course is to enable students to acquire the appropriate qualification in terms of professional competence in electrical engineering according to Decree No. 50/1978 Coll.

Specification of controlled education, way of implementation and compensation for absences

Controlled participation in lessons: Controlled participation in lessons: 100% attendance at seminars is required.

Recommended optional programme components

Participation in professional excursions in educational institutions or companies that deal with problem solving according to the course syllabus is expected. It is also possible to attend lectures on the subject.

Prerequisites and corequisites

Not applicable.

Basic literature

Vyhláška č.50/1978 Sb. - vyhláška Českého úřadu bezpečnosti práce a Českého báňského úřadu o odborné způsobilosti v elektrotechnice, aktuální znění z 1.9.1982 (verze 2). (CS)
LPE s.r.o. Vyhláška 50/78 Sb. Studijní materiály pro §5, §6, §7, §8, §10. 1. vyd. Brno: LPE s.r.o, 2018. 140 s. Bez ISBN. (CS)
KŘÍŽ, Michal. Příručka pro zkoušky elektrotechniků-požadavky na základní odbornou způsobilost. 11. aktualizované vydání. Pardubice: Vydavatelství IN-EL, spol. s r.o., 2016. ISBN 978-80-87942-22-2. (CS)
Polabské školící a informační středisko. Zkušební testy podle vyhlášky č. 50/1978Sb. o odborné způsobilosti v elektrotechnice. 12. doplněné vydání. Nymburk: PŠIS, 2017. 134 s. Bez ISBN. (CS)
VOZOBULE, Josef. Učební texty ze zákonů, vyhlášek, předpisů a ČSN určené pro zkoušky revizních techniků elektrických zařízení a ostatní zájemce o elektrická zařízení.5. aktualizované vydání. Praha: Technická inspekce České republiky (TIČR), 2019. 454 s. Bez ISBN. (CS)

Recommended reading

KŘÍŽ, Michal. Dimenzování a jištění elektrických zařízení – tabulky a příklady. 5. aktualizované vydání. Pardubice: Vydavatelství IN-EL, spol. s r.o., 2019. 224 s. ISBN 978-80-87942-49-9. (CS)
ŠTĚPÁN, František. Proudové chrániče. 3. aktualizované vydání. Pardubice: Vydavatelství IN-EL, spol. s r.o., 2015. 144 s. ISBN 978-80-87942-11-6. (CS)
KŘÍŽ, Michal. Značky, barevné a alfanumerické značení v elektrotechnice. 1. vyd. el. Praha: Vydavatelství IN-EL, spol. s r.o. , 2012. 130 s. ISBN 80-86230-62-7. (CS)
KŘÍŽ, Michal. Praktické pomůcky a tabulky pro elektrotechniky. 3. aktualizované vydání. Pardubice: Vydavatelství IN-EL, spol. s r.o., 2017. 65 s. ISBN 978-80-87942-28-4. (CS)
Normy, vyhlášky a zákony, které mají návaznost na odbornou způsobilost v elektrotechnice. (CS)

Classification of course in study plans

  • Programme N-AIŘ-P Master's, 1. year of study, summer semester, elective

Type of course unit

 

Lecture

26 hours, optionally

Teacher / Lecturer

Syllabus

1. Introduction, Decree no. 50 / 1978Sb., Electrotechnical qualification.
2. Nomenclature, classification of electrical equipment according to different aspects, nominal voltages of mains and appliances
3. Wire marking in various ways.
4. Types of distribution networks and their designation (TN, TT, IT, DC networks).
5. AC sockets, leads.
6. Covering of electrical equipment, approval marks, graphic marks.
7. Nomenclature and technical standards focused on safety in electrical engineering.
8. Safe electrical installation, safe product.
9. Obligations of employees and employers in operation with electrical equipment, prohibited work, ensuring safety at work.
10. Protection against electric shock, nomenclature.
11. Areas in terms of danger of electric shock.
12. Protective equipment, protective measures (disconnection from the mains, double insulation, reinforced insulation, low voltage protection SELV, PELV).
13. First aid in case of electric shock

Laboratory exercise

26 hours, compulsory

Teacher / Lecturer

Syllabus

1. Decree no. 50 / 1978Sb. Electrotechnical qualification.
2. Classification of electrical equipment according to different aspects, nominal voltages of mains and appliances.
3. Wire marking in various ways.
4. Types of distribution networks and their designation (TN, TT, IT, DC networks).
5. Types of distribution networks.
6. AC sockets, leads.
7. Protection of electrical equipment, approval marks, graphic marks.
8. Nomenclature and technical standards with a focus on safety in electrical engineering.
9. Safe electrical installation, safe product.
10. Obligations of employees and employers in operation with electrical equipment, prohibited work, ensuring safety at work.
11. Protection against electric shock, nomenclature, areas in terms of danger of electric shock.
12. Protective equipment, protective measures (disconnection from the mains, double insulation, reinforced insulation, low voltage protection SELV, PELV).
13. First aid in case of electric shock.