Course detail

Selected sections of building technology processes - GP

FAST-CW54Acad. year: 2020/2021

The first part the course covers the study of selected construction processes linked with carcass and interior and finishing processes at the realization of the building constructions. It is dealing with technology, space and time structure, mutual links, requirements for the site preparation, principles of the execution of construction processes and respective quality requirements. In the part dealing with execution of building construction technologies of special construction foundation for excavated underground constructions are given. Further a summary of classical and modern tunnelling systems and assemblies, machines and equipment for building of underground constructions is presented.

Language of instruction

Czech

Number of ECTS credits

3

Guarantor

doc. Ing. Vít Motyčka, CSc.

Department

Institute of Technology, Mechanisation and Construction Management (TST)

Learning outcomes of the course unit

The students will master the course objective of the Selected Issues of the Technology of GP Construction Processes, acquire basic knowledge of implementation of selected building processes of underground, building and engineering constructions. This knowledge further on enables subsequent study of time planning, modelling, optimisation, and rational management of site operations.

Prerequisites

The students should have mastered the basic knowledge of geology, geo-mechanics, construction foundation, planning of underground and transport constructions.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Not applicable.

Assesment methods and criteria linked to learning outcomes

Not applicable.

Course curriculum

1. Introduction into the science of the construction technology. Analysis of building processes, process flow chart.
2.Principles of technology procedures at execution of earthworks.
3.Execution of utilities and roads. Mechanization of construction processes, definitions, tasks and stage of mechanization. Capacity of machines and machine assemblies, basic division.
4.Principles of walling made of bricks, shaped bricks and stone. Module, technology and quality requirements. Quality control.
5.Installation procedures. Interior drains. Water and central heating distributions. Execution of building insulations against water, heat, noise, vibrations and chemical impacts. Flowcharts, readiness of the building, links, tests and quality inspections.
6.Building structures surface treatment – interior and exterior plasters, types, flowcharts, preparation of the base, technology intervals, flatness requirements, quality control.
7.Technology of works of special construction foundation related with the excavated underground constructions.
8.Supporting of building structures and jet injections.
9.Casing structures (Stent Walls, pilot and underground walls).
10.Injections and anchoring of the rock environment.
11.Nomenclature of underground structures – types, division. Tunnel systems and arrangements.
12.Ring (curb) method. New Austrian tunnelling method. Method of a peripheral notch method. Micro-tunnelling.
13.Machines and equipment for construction of underground constructions (cut, excavated, micro-tunnelled).

Work placements

Not applicable.

Aims

To acquire necessary knowledge of the execution of basic construction processes of building and engineering constructions, enabling subsequent study of time planning, modelling, optimisation and rational operations management on sites. The aim is to gain knowledge of technology, space, time and economic structure of the selected partial construction processes.

Specification of controlled education, way of implementation and compensation for absences

Extent and forms are specified by guarantor’s regulation updated for every academic year.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Klepsatel,F.,Kusý,P.,Mařík,L.: Výstavba tunelů ve skalních horninách. JAGA Bratislava, 2003.
Lízal,P. a kol.: Technologie stavebních procesů pozemních staveb. Cerm,s.r.o. Brno, 2003.
Motyčka,V. a kol.: Technologie staveb I, Technologie stavebních procesů, část 2, Hrubá vrchní stavba. Cerm,s.r.o. Brno,, 2005.
Klepsatel,F.,Kusý,P.,Mařík,L.: Městské podzemní stavby. JAGA Bratislava, 2005.
Kudrna,J.: Technologie pozemních komunikací. VUT v Brně, FAST, 2007.

Recommended reading

Kolymbas,D.: Geotechnik-Tunnelbau und Tunnelmechanik. Springer, 1998.

Type of course unit

 

Lecture

26 hours, optionally

Teacher / Lecturer

doc. Ing. Vít Motyčka, CSc.

Syllabus

1. Introduction into the science of the construction technology. Analysis of building processes, process flow chart. 2.Principles of technology procedures at execution of earthworks. 3.Execution of utilities and roads. Mechanization of construction processes, definitions, tasks and stage of mechanization. Capacity of machines and machine assemblies, basic division. 4.Principles of walling made of bricks, shaped bricks and stone. Module, technology and quality requirements. Quality control. 5.Installation procedures. Interior drains. Water and central heating distributions. Execution of building insulations against water, heat, noise, vibrations and chemical impacts. Flowcharts, readiness of the building, links, tests and quality inspections. 6.Building structures surface treatment – interior and exterior plasters, types, flowcharts, preparation of the base, technology intervals, flatness requirements, quality control. 7.Technology of works of special construction foundation related with the excavated underground constructions. 8.Supporting of building structures and jet injections. 9.Casing structures (Stent Walls, pilot and underground walls). 10.Injections and anchoring of the rock environment. 11.Nomenclature of underground structures – types, division. Tunnel systems and arrangements. 12.Ring (curb) method. New Austrian tunnelling method. Method of a peripheral notch method. Micro-tunnelling. 13.Machines and equipment for construction of underground constructions (cut, excavated, micro-tunnelled).

Exercise

13 hours, compulsory

Teacher / Lecturer

doc. Ing. Vít Motyčka, CSc.

Syllabus

Surveying and staking of the construction, the procedure of earth works, trench reinforcement, execution time schedule Graphical depiction of earth work procedure, machinery selection for carrying out earth work on a particular building, type of work of selected machines, scheme of machinery movement on the site Elaboration of a complex technological regulation for execution of the assigned masonry building including necessary materials calculation and itemising The masonry construction procedure of one floor of the building in question; machinery, mechanisms and masonry tools Technological regulation for carrying out the internal wiring, piping and fitting Internal plastering procedure, readiness of the building, materials used, workforce composition, mechanisms and work tools Execution procedure, time schedule of internal plastering on the assigned building Consultation seminar Building construction – partition structures Building construction - tunnelling methods Special foundation engineering Assessment of implemented tasks, defence of proposed designs, credit awarding