Course detail

Modelling I

FSI-YM1Acad. year: 2011/2012

This subject supports the development of abilities to express one´s visual experience, concepts and ideas. It leads to acquiring the sense for matter, shape, estimation of dimensions, contents, distances and it gives information about the craftsmanship basis for the moulding practice. The course is focused on the human head modelling.

Language of instruction

Czech

Number of ECTS credits

3

Mode of study

Not applicable.

Learning outcomes of the course unit

Students acquire the basic knowledges about modeling. An excercise of still-life modeling is the base for sklill mastering and acquiring of basic knowledges for building-up the mass and character of objects in the space.

Prerequisites

The presumption is elementary knowledges about perspective and experiences with the drawing of still-life composed of basic geometric objects with the uniform surface in perspective view by the model. Practise experiences with construction of abstract area composition and another experinces in the area creation are welcome.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Teaching methods depend on the type of course unit as specified in the article 7 of BUT Rules for Studies and Examinations.

Assesment methods and criteria linked to learning outcomes

Graded course-unit credit requirements: Attendance at exercises, meeting assigned projects deadlines.
Resulting evaluation consists of evaluations on tasks. In total it will be possible to aquire 100 points. Resulting classification will be defined by the ECTS scale.
If some of the projects are awarded less than half of the maximum pts., final evaluation of the course is "failed".
According to the article No. 13 of Study and Examination Rules of Brno University of Technology ECTS evaluation degree scale is used. . If some of the projects are awarded less than 50 pts., final evaluation of the course is "failed". The course is evaluated with the following grades: ECTS EVALUATION DEGREES / PTS. RATING / NUMERIC RATING: A / 100 - 90 / 1 / Excellent; B /89 - 80 / 1,5 / Very good; C / 79 - 70 / 2 / Good; D / 69 - 60 / Satisfactory; E / 59 - 50 / Sufficient; F / 49 - 0 / 4 / Failed.

Course curriculum

Not applicable.

Work placements

Not applicable.

Aims

The assigment of this subject is to familiarize students with modeling, it means with the basic type of visual and space entry. Practical excercises accent building-up the volume with the emphasis to the proportions and the character of objects. The aim is a development of student creative potential.

Specification of controlled education, way of implementation and compensation for absences

The attendance in education is controlled. Student has to be present in scheduled hours in the schoolroom, work on given projects and wait for consultation, unless a lecturer gives any other individual plan. The excuse of absence is possible only due similar reasons as by work law, e.g. illness. Unexcused absence can lead to give no accreditation. When total absence is greater than 50% (including excused absence), projects may not be accepted for impossibility of project solving reasons, and compensatory assigning is not possible.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

BAMMES, Gottfried. Der nackte Mensch: Hand und Lehrbuch der Anatomie für Künstler. Dresden: VEB Verlag der Kunst, 1982. ISBN 3-364-00016-6.
GOLDFINGER, Eliot. Human Anatomy for Artists: The Elements of Form. New York: Oxford University Press, 1991. ISBN 978-0195052060.
KOS, Jaroslav a ŽILÁK, Pavel. Anatomie člověka pro výtvarníky. Praha: Aventinum, 1996. ISBN 80-85277-98-0.

Recommended reading

MALIVA, Josef. Doteky s uměním a časem I. díl: Přehled evropských dějin umění od pravěku po renesanci. Brno: Vysoké učení technické v Brně, 1996. ISBN 80-214-0822-7.

Classification of course in study plans

  • Programme B3A-P Bachelor's

    branch B-PDS , 3. year of study, winter semester, compulsory

Type of course unit

 

labs and studios

39 hours, compulsory

Teacher / Lecturer

Syllabus


1st project, moulding of the dome by a model, rules for construction;
Moulding of the dome by a model;
Moulding of the dome by a model;
Moulding of the dome by a model, evaluation of 1st project /positives and negatives analysis of several works/;
2nd project, moulding of the head by plaster bust, rules for construction;
Moulding of the head by a plaster bust;
Moulding of the head by a plaster bust;
Moulding of the head by a plaster bust, evaluation of 2nd project /positives and negatives analysis of several works/;
3rd project, moulding of the head by a plaster bust;
Moulding of the head by a plaster bust;
Moulding of the head by a plaster bust;
Moulding of the head by a plaster bust, evaluation of 3rd project /positives and negatives analysis of several works/, final evaluation of semester.