Course detail

Statics

FSI-3STAcad. year: 2011/2012

Introduction to solid mechanics, specification of the course Statics and its relation to other courses of solid mechanics. Model and theoretical aspects of engineering mechanics, specification of basic terms and general principles. Introduction to and discussion on the elements of Statics - force, moment of force about a point, moment of force about an axis. Discussion on both concentrated and distributed force systems. Classification of force systems and their resultants. Equivalent force systems. Replacement of a force system by a force and a couple, replacement of a force system by a single force. Conditions for rigid-body equilibrium. Basic tasks of Statics. Centre of gravity and methods of its evaluation. Body supports and connections, their computational models, kinematic pairs. Degrees of freedom of a single body, constraints, concept of a free-body diagram. Statically determinate and indeterminate problems. Algorithm of static equilibrium solution of a body and its application to the analysis and solution of statically determinate systems, mechanisms and trusses. Basic graphical constructions. Passive resistances - their analysis and computational models, dry friction and rolling resistance. Free-body diagrams in actual states of motion. Application to engineering problems including friction forces and rolling resistances.

Language of instruction

Czech

Number of ECTS credits

5

Mode of study

Not applicable.

Learning outcomes of the course unit

Students will acquire basic knowledge of mechanics of solids, description and classification of force systems, determination of their characteristics and resultants as well as possibility of their replacement. Students will be made familiar with computational models of body connections without and with passive resistances. Also provided will be the knowledge of kinematic and static analysis of supported and connected solids and mechanisms, equilibrium solution and concept of free-body diagram. Students will be able to solve static problems using basic graphics methods.

Prerequisites

Solution of system of equations (linear, nonlinear), vectorial calculus, grounding of matrix calculus, integral calculus (line, double and triple integral).

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Teaching methods depend on the type of course unit as specified in the article 7 of BUT Rules for Studies and Examinations.

Assesment methods and criteria linked to learning outcomes

The course-unit credit is granted under the condition of active participation in seminars and passing the seminar tests of basic knowledge (at least 15 ECTS points out of 30 must be gained). The points gained in seminar tests are included in the final course evaluation.

Final examination: Written part of the examination plays a decisive role, where the maximum of 70 ECTS points can be reached. Solution of several computational problems is demanded. The problems come from typical profile areas of given subject and can be supplied by a theoretical question, proof, etc. The lecturer will specify exact demands like the number and types problems during the semester preceding the examination.

Final evaluation of the course is obtained as the sum of ECTS points gained in seminars and at the examination. To pass the course, at least 50 points must be reached.

Course curriculum

Not applicable.

Work placements

Not applicable.

Aims

The aim of course "Statics" is to define and introduce basic terms, computational models, theories and algorithms of static problem solutions. Acquired knowledge is necessary to continue in following courses related to mechanics of solids (Dynamics, Strength of Materials). Knowledge of static problems solutions is important for structural design of machine parts.

Specification of controlled education, way of implementation and compensation for absences

Attendance at seminars is required. One absence can be compensated for by attending a seminar with another group in the same week, or by elaboration of substitute tasks. Longer absence may be made up via special tasks according to instructions of the tutor.
Course-unit credits are awarded on the following conditions:
- active participation in the seminars,
- good results in seminar tests of basic knowledge,
- solution of additional tasks in case of longer excusable absence.
Seminar tutor will specify the form of these conditions in the first week of semester.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Hibbeler, R. C.: Engineering Mechanics - Statics and Dynamics, 13th ed., 2012 (EN)
Beer, J. P., Johnston, E. R. Jr.: Vector Mechanics for Engineers, Statics and Dynamics, 9th ed., 2009 (EN)
Muvdi, B. B., Al-Khafaji, A. W., McNabb, J. W.: Statics for engineers, 1997 (EN)

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme B3A-P Bachelor's

    branch B-MAI , 2. year of study, winter semester, compulsory
    branch B-MET , 2. year of study, winter semester, compulsory
    branch B-FIN , 2. year of study, winter semester, compulsory

  • Programme B3S-P Bachelor's

    branch B-STI , 2. year of study, winter semester, compulsory

Type of course unit

 

Lecture

26 hours, optionally

Teacher / Lecturer

Syllabus

Defining basic terms and general principles of engineering mechanics.
Force, moment of force about a point, moment of force about an axis.
Classification of force systems, their characteristics and resultants.
Centre of gravity and methods of its evaluation.
Equivalent force systems. Static equilibrium of rigid body.
Basic tasks of Statics.
Geometry and characteristics of body supports and connections, their computational models, kinematic pairs.
Algorithm of static equilibrium solution of constrained body.
Basic graphical constructions.
Static determinate systems, mechanisms and their statics solutions.
Trusses structures, method of joints.
Passive resistances - dry friction and rolling resistance, basic models of body connections, free-body diagrams in actual states of movement.
Passive resistances - static equilibrium of body and rigid body system on movement.

Exercise

12 hours, compulsory

Teacher / Lecturer

Syllabus

1.Determination of force, moment of force about a point and moment of force about an axis.
3.Replacement of a force system by an equivalent force, resultants of distributed force systems.
5.Constraints of a rigid body, concept of a free-body diagram.
7.Static equilibrium of movable body, equilibrium position.
9.Computational and graphical solution of equilibrium of rigid body system.
11.Computational and graphical solution of trusses.

Computer-assisted exercise

14 hours, compulsory

Teacher / Lecturer

Syllabus

2.Moment of couple of force, resultants of force system.
4.Centre of gravity determination.
6.Solution of static equilibrium of constrained body.
8.Classification of rigid body systems, their degrees of freedom. Free–body diagram of body system.
10.Computational and graphical solution of equilibrium of rigid body system.
12.Statical equilibrium of movable body with passive resistances.
13.Statical equilibrium of movable body system with passive resistances.