Publication detail

DESIGN OF THE PUMP CONTROLLER OF THE LOW PRESSURE SEWER NETWORK

RUČKA, J. ANDRŠ, O. KOVÁŘ, J.

Original Title

DESIGN OF THE PUMP CONTROLLER OF THE LOW PRESSURE SEWER NETWORK

English Title

DESIGN OF THE PUMP CONTROLLER OF THE LOW PRESSURE SEWER NETWORK

Type

journal article

Language

en

Original Abstract

The paper deals with the low pressure sewer networks which are used for the systematic drainage of wastewater in locations where it is not technically possible, respectively economically advantageous to build a gravity sewer network. With regard to the size of the urban area, town or drainage site these systems can be very large, involving tens or hundreds of independently working pumps that are connected to the common pipeline system. The right one, or rather the optimal topology design of such a system and performance parameters of its elements is therefore a great challenge. The subsequent operation of the low pressure sewer network system also requires a considerable know-how, particularly with regard to the fact that these are technically complex systems with many components which exhibit a variety of typical operating defects. The removal of these disorders requires a deep understanding of the issues, experience, and availability of adequate industrial solutions. One of the possible failures of the low pressure sewer network is clogging of the pipelines with sediment from wastewater. The following text describes the technical way to prevent the clogging of the pipeline of a low pressure sewer network. This paper presents an intelligent flushing system which is developed within the research project reg. No. TA04010023 at the Faculty of Civil Engineering, Brno University of Technology.

English abstract

The paper deals with the low pressure sewer networks which are used for the systematic drainage of wastewater in locations where it is not technically possible, respectively economically advantageous to build a gravity sewer network. With regard to the size of the urban area, town or drainage site these systems can be very large, involving tens or hundreds of independently working pumps that are connected to the common pipeline system. The right one, or rather the optimal topology design of such a system and performance parameters of its elements is therefore a great challenge. The subsequent operation of the low pressure sewer network system also requires a considerable know-how, particularly with regard to the fact that these are technically complex systems with many components which exhibit a variety of typical operating defects. The removal of these disorders requires a deep understanding of the issues, experience, and availability of adequate industrial solutions. One of the possible failures of the low pressure sewer network is clogging of the pipelines with sediment from wastewater. The following text describes the technical way to prevent the clogging of the pipeline of a low pressure sewer network. This paper presents an intelligent flushing system which is developed within the research project reg. No. TA04010023 at the Faculty of Civil Engineering, Brno University of Technology.

Keywords

low pressure sewer, operation, design, waste water, clogging, flushing

Released

01.12.2016

Publisher

MM Science Journal

Location

Praha

Pages from

1654

Pages to

1658

Pages count

5

URL

BibTex


@article{BUT131044,
  author="Jan {Ručka} and Ondřej {Andrš} and Jiří {Kovář}",
  title="DESIGN OF THE PUMP CONTROLLER OF THE LOW PRESSURE SEWER NETWORK",
  annote="The paper deals with the low pressure sewer networks which are used for the systematic drainage of wastewater in locations where it is not technically possible, respectively economically advantageous to build a gravity sewer network. With regard to the size of the urban area, town or drainage site these systems can be very large, involving tens or hundreds of independently working pumps that are connected to the common pipeline system. The right one, or rather the optimal topology design of such a system and performance parameters of its elements is therefore a great challenge. The subsequent operation of the low pressure sewer network system also requires a considerable know-how, particularly with regard to the fact that these are technically complex systems with many components which exhibit a variety of typical operating defects. The removal of these disorders requires a deep understanding of the issues, experience, and availability of adequate industrial solutions. One of the possible failures of the low pressure sewer network is clogging of the pipelines with sediment from wastewater. The following  text describes the technical way to prevent the clogging of the pipeline of a low pressure sewer network. This paper presents an intelligent flushing system which is developed within the research project reg. No. TA04010023 at the Faculty of Civil Engineering, Brno University of Technology.",
  address="MM Science Journal",
  chapter="131044",
  doi="10.17973/MMSJ.2016_12_2016205",
  howpublished="online",
  institution="MM Science Journal",
  number="1",
  volume="6",
  year="2016",
  month="december",
  pages="1654--1658",
  publisher="MM Science Journal",
  type="journal article"
}