Publication detail

Determination of trace amounts of total dissolved cationic aluminium species in environmental samples by solid phase extraction using manometer-sized titanium dioxide and atomic spectrometry techniques

MATÚŠ, P. HAGAROVÁ, I. BUJDOŠ, M. DIVIŠ, P. KUBOVÁ, J.

Original Title

Determination of trace amounts of total dissolved cationic aluminium species in environmental samples by solid phase extraction using manometer-sized titanium dioxide and atomic spectrometry techniques

English Title

Determination of trace amounts of total dissolved cationic aluminium species in environmental samples by solid phase extraction using manometer-sized titanium dioxide and atomic spectrometry techniques

Type

journal article in Web of Science

Language

en

Original Abstract

Nanometer-sized titanium dioxide was used as a solid-phase extractant for the separation and preconcentration of trace amounts of AI(III) prior to its determination by electrothermal atomic absorption spectrometry (ET AAS) and inductively coupled plasma optical emission spectrometry (ICP OES). The optimal conditions for the proposed solid phase extraction (SPE; 50 mg TiO(2), 10 min extraction time, pH 6.0, HCl and HNO(3) as eluents) and ET AAS measurement (1500 degrees C pyrolysis and 2600 degrees C atomization temperatures, Mg(NO(3))(2) as matrix modifier) were obtained. The adsorption capacity of TiO(2) was 4.1 mg Al g(-1) TiO(2). Two modes of the proposed procedure were compared, (1) batch and elution mode with the elution of AI from TiO(2) phase by nitric or hydrochloric acid, and (II) batch and slurry mode (without elution) with the direct TiO(2) phase-slurry sampling. Finally, the batch and slurry mode of manometer-sized TiO(2) SPE with slurry ET AAS detection and quantification was preferred and used for the determination of trace amounts of total dissolved cationic Al species in synthetic and natural water samples. The method accuracy was checked by the analysis of lake water CRM TMDA-61 and by the technique of analyte addition (sample spiking). Under the optimal conditions, the calibration curve for batch and slurry TiO(2) SPE with a 10-fold preconcentration was linear up to 40 mu g L(-1) AI. The limit of detection (LOD) and the limit of quantification (LOQ) was 0.11 mu g L(-1) Al and 0.35 mu g L(-1) AI, respectively, with a preconcentration factor of 20 and a relative standard deviation (RSD) lower than 5%. (C) 2009 Elsevier Inc. All rights reserved.

English abstract

Nanometer-sized titanium dioxide was used as a solid-phase extractant for the separation and preconcentration of trace amounts of AI(III) prior to its determination by electrothermal atomic absorption spectrometry (ET AAS) and inductively coupled plasma optical emission spectrometry (ICP OES). The optimal conditions for the proposed solid phase extraction (SPE; 50 mg TiO(2), 10 min extraction time, pH 6.0, HCl and HNO(3) as eluents) and ET AAS measurement (1500 degrees C pyrolysis and 2600 degrees C atomization temperatures, Mg(NO(3))(2) as matrix modifier) were obtained. The adsorption capacity of TiO(2) was 4.1 mg Al g(-1) TiO(2). Two modes of the proposed procedure were compared, (1) batch and elution mode with the elution of AI from TiO(2) phase by nitric or hydrochloric acid, and (II) batch and slurry mode (without elution) with the direct TiO(2) phase-slurry sampling. Finally, the batch and slurry mode of manometer-sized TiO(2) SPE with slurry ET AAS detection and quantification was preferred and used for the determination of trace amounts of total dissolved cationic Al species in synthetic and natural water samples. The method accuracy was checked by the analysis of lake water CRM TMDA-61 and by the technique of analyte addition (sample spiking). Under the optimal conditions, the calibration curve for batch and slurry TiO(2) SPE with a 10-fold preconcentration was linear up to 40 mu g L(-1) AI. The limit of detection (LOD) and the limit of quantification (LOQ) was 0.11 mu g L(-1) Al and 0.35 mu g L(-1) AI, respectively, with a preconcentration factor of 20 and a relative standard deviation (RSD) lower than 5%. (C) 2009 Elsevier Inc. All rights reserved.

Keywords

Aluminium; Nanometer-sized titanium dioxide TiO(2); Solid phase extraction; Slurry sampling; ET AAS; ICP OES

RIV year

2009

Released

19.10.2009

Publisher

ELSEVIER SCIENCE INC

Location

NEW YORK

Pages from

1473

Pages to

1479

Pages count

7

URL

Documents

BibTex


@article{BUT46848,
  author="Pavel {Diviš} and Peter {Matúš}",
  title="Determination of trace amounts of total dissolved cationic aluminium species in environmental samples by solid phase extraction using manometer-sized titanium dioxide and atomic spectrometry techniques",
  annote="Nanometer-sized titanium dioxide was used as a solid-phase extractant for the separation and preconcentration of trace amounts of AI(III) prior to its determination by electrothermal atomic absorption spectrometry (ET AAS) and inductively coupled plasma optical emission spectrometry (ICP OES). The optimal conditions for the proposed solid phase extraction (SPE; 50 mg TiO(2), 10 min extraction time, pH 6.0, HCl and HNO(3) as eluents) and ET AAS measurement (1500 degrees C pyrolysis and 2600 degrees C atomization temperatures, Mg(NO(3))(2) as matrix modifier) were obtained. The adsorption capacity of TiO(2) was 4.1 mg Al g(-1) TiO(2). Two modes of the proposed procedure were compared, (1) batch and elution mode with the elution of AI from TiO(2) phase by nitric or hydrochloric acid, and (II) batch and slurry mode (without elution) with the direct TiO(2) phase-slurry sampling. Finally, the batch and slurry mode of manometer-sized TiO(2) SPE with slurry ET AAS detection and quantification was preferred and used for the determination of trace amounts of total dissolved cationic Al species in synthetic and natural water samples. The method accuracy was checked by the analysis of lake water CRM TMDA-61 and by the technique of analyte addition (sample spiking). Under the optimal conditions, the calibration curve for batch and slurry TiO(2) SPE with a 10-fold preconcentration was linear up to 40 mu g L(-1) AI. The limit of detection (LOD) and the limit of quantification (LOQ) was 0.11 mu g L(-1) Al and 0.35 mu g L(-1) AI, respectively, with a preconcentration factor of 20 and a relative standard deviation (RSD) lower than 5%. (C) 2009 Elsevier Inc. All rights reserved.",
  address="ELSEVIER SCIENCE INC",
  chapter="46848",
  doi="10.1016/j.jinorgbio.2009.08.004",
  institution="ELSEVIER SCIENCE INC",
  journal="JOURNAL OF INORGANIC BIOCHEMISTRY",
  number="11",
  volume="103",
  year="2009",
  month="october",
  pages="1473--1479",
  publisher="ELSEVIER SCIENCE INC",
  type="journal article in Web of Science"
}