Publication detail

Cathode material for lithium ion accumulators prepared by screen printing for Smart Textile applications

SYROVÝ, T. KAZDA, T. SYROVÁ, L. VONDRÁK, J. KUBÁČ, L. SEDLAŘÍKOVÁ, M.

Original Title

Cathode material for lithium ion accumulators prepared by screen printing for Smart Textile applications

Type

journal article in Web of Science

Language

English

Original Abstract

The presented study is focused on the development of LiFePO4 based cathode for thin and flexible screen printed secondary lithium based accumulators. An ink formulation was developed for the screen printing technique, which enabled mass production of accumulator's cathode for Smart Label and Smart Textile applications. The screen printed cathode was compared with an electrode prepared by the bar coating technique using an ink formulation based on the standard approach of ink composition. Obtained LiFePO4 cathode layers were characterized by scanning electron microscopy (SEM), energy-dispersive Xray spectroscopy (EDS) and galvanostatic charge/discharge measurements at different loads. The discharge capacity, capacity retention and stability at a high C rate of the LiFePO4 cathode were improved when Super P and PVDF were replaced by conductive polymers PEDOT:PSS. The achieved capacity during cycling at various C rates was approximately the same at the beginning and at the end, and it was about 151 mAh/g for cycling under 1C. The obtained results of this novelty electrode layer exceed the parameters of several electrode layers based on LiFePO4 published in literature in terms of capacity, cycling stability and overcomes them in terms of simplicity/industrial process ability of cathode layer fabrication and electrode material preparation.

Keywords

Screen printing,Lithium ion accumulator, Lithium iron phosphate, PEDOT:PSS, Conductive polymer,Printed electronics, Smart Textile

Authors

SYROVÝ, T.; KAZDA, T.; SYROVÁ, L.; VONDRÁK, J.; KUBÁČ, L.; SEDLAŘÍKOVÁ, M.

Released

31. 3. 2016

ISBN

0378-7753

Periodical

Journal of Power Sources

Number

309

State

Kingdom of the Netherlands

Pages from

192

Pages to

201

Pages count

10

URL

http://www.sciencedirect.com/science/article/pii/S0378775316300908

BibTex

@article{BUT128232,
  author="Tomáš {Syrový} and Tomáš {Kazda} and Lucie {Syrová} and Jiří {Vondrák} and Lubomír {Kubáč} and Marie {Sedlaříková}",
  title="Cathode material for lithium ion accumulators prepared by screen printing for Smart Textile applications",
  journal="Journal of Power Sources",
  year="2016",
  number="309",
  pages="192--201",
  doi="10.1016/j.jpowsour.2016.01.089",
  issn="0378-7753",
  url="http://www.sciencedirect.com/science/article/pii/S0378775316300908"
}