Project detail

Integrovaný návrh procesů a zařízení pro vysoké využití energetického potenciálu paliv a odpadů

Duration: 01.01.2014 — 31.12.2016

Funding resources

Brno University of Technology - Vnitřní projekty VUT

- whole funder (2014-01-01 - 2015-12-31)

On the project

Projekt je zaměřen na snižování energetické náročnosti průmyslových procesů formou systémového přístupu k integraci úsporných technologií a postupů. K naplnění záměru projektu budou zkoumány možnosti synergického spojení perspektivních technických řešení a moderních způsobů analýzy a optimalizace provozních celků, vše s důrazem na zvýšení efektivnosti, udržitelnosti a spolehlivosti procesů a snížení jejich dopadů na životní prostředí. Zvláštní pozornost bude zaměřena i na expertní základy spojené s energetickým využitím odpadů.

Mark

FSI-S-14-2481

Default language

Czech

People responsible

Buzík Jiří, Ing., Ph.D. - fellow researcher
Ferdan Tomáš, Ing., Ph.D. - fellow researcher
Frýba Lukáš, Ing., Ph.D. - fellow researcher
Hájek Jiří, doc. Ing., Ph.D. - fellow researcher
Hudák Igor, Ing., Ph.D. - fellow researcher
Jegla Zdeněk, doc. Ing., Ph.D. - fellow researcher
Kuba Pavel, Ing. - fellow researcher
Lošák Pavel, Ing., Ph.D. - fellow researcher
Nekvasil Richard, Ing., Ph.D. - fellow researcher
Nováček Filip, Ing. - fellow researcher
Pačíska Tomáš, Ing. - fellow researcher
Pavlas Martin, doc. Ing., Ph.D. - fellow researcher
Putna Ondřej, Ing., Ph.D. - fellow researcher
Skryja Pavel, Ing., Ph.D. - fellow researcher
Stehlík Petr, prof. Ing., CSc., dr. h. c. - fellow researcher
Šomplák Radovan, doc. Ing., Ph.D. - fellow researcher
Vondra Marek, Mgr. Ing., Ph.D. - fellow researcher
Máša Vítězslav, doc. Ing., Ph.D. - principal person responsible

Units

Institute of Process Engineering
- (2014-01-01 - 2016-12-31)
Faculty of Mechanical Engineering
- (2014-01-01 - 2016-12-31)

Results

ŠOMPLÁK, R.; PAVLAS, M.; KROPÁČ, J.; PUTNA, O.; PROCHÁZKA, V. Logistic model-based tool for policy-making towards sustainable waste management. Clean Technologies and Environmental Policy, 2014, vol. 16, no. 10098, p. 1275-1286. ISSN: 1618-954X.
Detail

KLUČKA, I.; NEKVASIL, R. Stress Analysis of Deformed Storage Tank Shell. In Chemical Engineering Transactions. VIA GIUSEPPE COLOMBO 81/A, MILANO, MI 20133, ITALY: AIDIC SERVIZI SRL, 2016. p. 853-858. ISBN: 978-88-95608-42-6.
Detail

KILKOVSKÝ, B.; JEGLA, Z.; STEHLÍK, P. Possibilities of Intensifying Heat Transfer through Finned Surfaces in Heat Exchangers for High Temperature Applications. Applied Thermal Engineering, 2014, vol. 70, no. 2, p. 1283-1287. ISSN: 1359-4311.
Detail

PAČÍSKA, T.; TUREK, V.; JEGLA, Z.; KILKOVSKÝ, B. Suitability of some commonly available software for unconventional condenser analysis. Applied Thermal Engineering, 2014, vol. 70, no. 2, p. 1195-1201. ISSN: 1359-4311.
Detail

ŠOMPLÁK, R.; PAVLAS, M. Potenciál výroby energie z odpadů v případě zákazu skládkování. Waste forum, 2014, roč. 2014, č. 2, s. 95-104. ISSN: 1804-0195.
Detail

NEKVASIL, R.; LOŠÁK, P.; LUKÁČ, P. ANALYSIS OF DAMAGE CONNECTION PIPING. Engineering Mechanics .... Brno: Brno University of Technology, 2014. p. 428-431. ISSN: 1805-8248.
Detail

FERDAN, T.; ŠOMPLÁK, R.; PAVLAS, M. Improved feasibility analysis under volatile conditions: case of waste-to-energy. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: AIDIC Servizi S.r.l., 2014. p. 691-696. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

PUTNA, O.; KROPÁČ, J.; FRÝBA, L.; PAVLAS, M. Prediction of Heating Value of Waste and Its Importance for Conceptual Development of New Waste-to-Energy Plants. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi S.r.l., 2014. p. 1273-1278. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

MÁŠA, V.; KUBA, P.; PETRILÁK, D.; LOKAJ, J. Decrease in Consumption of Compressed Air in Dry Ice Blasting Machine. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 805-810. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

JEGLA, Z.; HÁJEK, J.; VONDÁL, J. Numerical Analysis of Heat Transfer in Radiant Section of Fired Heater with Realistic Imperfect Geometry of Tube Coil. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 889-894. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

KUBA, P.; BOBÁK, P.; MÁŠA, V.; VONDRA, M. Acquisition of Operational Data in Industrial Laundry Facilities. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 1645-1650. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

BUZÍK, J.; NOVÁČEK, F.; LOŠÁK, P. CFD and FEA Boiler Collector Analysis. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 847-852. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

BEDNAŘÍK, A.; KUBA, P.; MOSKOVETS, E.; TOMALOVÁ, I.; KRÁSENSKÝ, P.; HOUŠKA, P.; PREISLER, J. Rapid Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry Imaging with Scanning Desorption Laser Beam. ANALYTICAL CHEMISTRY, 2014, vol. 86, no. 2, p. 982-986. ISSN: 0003-2700.
Detail

BUZÍK, J. Damage of the boiler collector caused by vibration. In Book of extended abstracts 30th conference with international participation Computational Mechanics 2014. Plzeň: University of West Bohemia, 2014. p. 11-12. ISBN: 978-80-261-0429-2.
Detail

HUDÁK, I.; BĚLOHRADSKÝ, P.; SKRYJA, P. Effects of inert gases on NOx formation in the conventional burner. In Proceedings of the 7th European Combustion Meeting. Budapest: 2015. p. 187-188. ISBN: 978-963-12-1257-0.
Detail

HÁJEK, J.; JUŘENA, T.; BAIER, B.; BAGHERZADEH, A.; SCHNICK, T.; SMEJKAL, Q. CFD Process Modeling of Industrial Calcination of Diatomite. CHEMIE INGENIEUR TECHNIK, 2015, vol. 87, no. 7, p. 991-997. ISSN: 0009-286X.
Detail

BORÁŇ, J.; HOUDKOVÁ, L.; KUNDRÁTEK, J. Koroze nerezové oceli ve vodárenství. In Sborník příspěvků VODA ZLÍN 2015. Zlín: Moravská vodárenská, a.s., 2015. s. 184-6. ISBN: 978-80-905716-1-7.
Detail

FERDAN, T.; ŠOMPLÁK, R.; ZAVÍRALOVÁ, L.; PAVLAS, M.; FRÝBA, L. A Waste-to-Energy Project: A Complex Approach towards the Assessment of Investment Risks. Applied Thermal Engineering, 2015, vol. 89, no. 1, p. 1127-1136. ISSN: 1359-4311.
Detail

MÁŠA, V.; TOUŠ, M.; PAVLAS, M. Using a utility system grey-box model as a support tool for progressive energy management and automation of buildings. Clean Technologies and Environmental Policy, 2016, vol. 18, no. 1, p. 195-208. ISSN: 1618-954X.
Detail

SKRYJA, P.; BĚLOHRADSKÝ, P.; HUDÁK, I.; JUŘENA, T. Experimental Study on NOx Formation in Gas-staged Burner. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2015. p. 997-1002. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
Detail

ŠOMPLÁK, R.; PAVLAS, M.; KROPÁČ, J.; ZAVÍRALOVÁ, L. Justýna – nástroj pro odhad produkce a výhřevnosti komunálních odpadů na úrovni mikroregionů. In elektronicka verze (online). 2015. s. 1-12. ISBN: 978-80-85990-26-3.
Detail

BUZÍK, J.; LÉTAL, T. Porovnání silových odezev u trubkového svazku za odlišných okrajových podmínek. Česká společnost chemického inženýrství, 2015. s. 1-12.
Detail

MÁŠA, V.; VONDRA, M. Operational Problems: Biomass Boilers with Oversized Output. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering Transactions. Milano, Italy: Aidic Servizi Srl, 2015. p. 331-336. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
Detail

VONDRA, M.; BOBÁK, P. Test Rig Development for Up-to-Date Experimental Study of Multi-Stage Flash Distillation Process. World Academy of Science, Engineering and Technology. Paříž: World Academy of Science, Engineering and Technology, 2015. p. 2398-2398. ISSN: 1307-6892.
Detail

NAĎ, M.; NEKVASIL, R. Analýza príčin vzniku trhlín na trubkách pri zvarovom spoji prehrievača kotla. Česká společnost chemického inženýrství, 2015. s. 1-9.
Detail

KLUČKA, I. Problematika zvlnění den uskladňovacích nádrží. Česká společnost chemického inženýrství, 2015. s. 1-15.
Detail

ŠOMPLÁK, R.; ZAVÍRALOVÁ, L. Síťové úlohy v oblasti nakládání s odpadem. 2015. s. 1-12.
Detail

BRUMMER, V.; JECHA, D.; OSIČKA, T.; LEŠTINSKÝ, P. Měření kinetiky oxidace VOC na poškozeném sypaném katalyzátoru Pt-Pd/Al2O3. In TVIP 2016. Hustopeče: CEMC, 2016. s. 113-1 (113-9 s.)ISBN: 978-80-85990-28-7.
Detail

PAVLAS, M.; PUTNA, O.; KROPÁČ, J.; STEHLÍK, P. Complex approach towards the assessment of waste-to-energy plants' future potential. In Thomé-Kozmiensky, K. J., Thiel, S. (Eds.): Waste Management, Volume 6, Waste-to-Energy. Neuruppin, Germany: TK Verlag Karl Thomé-Kozmiensky, 2016. p. 149-160. ISBN: 978-3-944310-29-9.
Detail

VONDRA, M.; MÁŠA, V.; BOBÁK, P. The Potential for Digestate Thickening in Biogas Plants and Evaluation of Possible Evaporation Methods. In CHEMICAL ENGINEERING TRANSACTIONS - VOL.52. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi Srl, 2016. p. 787-792. ISBN: 978-88-95608-42-6. ISSN: 2283-9216.
Detail

MÁŠA, V.; HAVLÁSEK, M. Integration of Air to Water Heat Pumps into Industrial District Heating Substations. In CHEMICAL ENGINEERING TRANSACTIONS - VOL.52. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi Srl, 2016. p. 739-744. ISBN: 978-88-95608-42-6. ISSN: 2283-9216.
Detail

HUDÁK, I.; BERANOVÁ, D.; SKRYJA, P.; BĚLOHRADSKÝ, P. DEHYDRATACE ENERGOSÁDROVCE V POLOPROVOZU. In Recenzovaný sborník příspěvků mezinárodní vědecké konference MMK 2016. Hradec Králové, Česká republika: MAGNANIMITAS, 2016. s. 1377-1383. ISBN: 978-80-87952-17-7.
Detail

KROPÁČ, J.; GREGOR, J.; PAVLAS, M. Material vs. Energy Recovery – An Assessment Using Computational Tools NERUDA and JUSTINE. In Pomberger, R., Trieb, T. (Eds.): Tagungsband zur 13. Recy & DepoTech-Konferenz. Leoben, Austria: Montanuniversität Leoben, 2016. p. 773-776. ISBN: 978-3-200-04777-8.
Detail

DOHNAL, M.; HÁJEK, J. Computational Analysis of Swirling Pipe Flow. In CHEMICAL ENGINEERING TRANSACTIONS. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi, S.r.l., 2016. p. 757-762. ISBN: 978-88-95608-42-6. ISSN: 2283-9216.
Detail

ZEJDA, V.; HUDÁK, I. Adsorpční jednotka PSA pro výuku a výzkum. In Recenzovaný sborník příspěvků mezinárodní vědecké konference MMK 2016. VII. Hradec Králové, Česká republika: MAGNANIMITAS, 2016. s. 1405-1413. ISBN: 978-80-87952-17-7.
Detail

JECHA, D.; GAL, P.; JÍCHA, J. Použití selektivní nekatalitické redukce (SCNR) na kotli se spalováním černého. In Ochrana ovzdušia - Air protection 2017. Bratislava: Kongras STUDIO, spol. s.r.o., 2017. s. 225-230. ISBN: 978-80-89565-30-6.
Detail

KILKOVSKÝ, B.; STEHLÍK, P.; JEGLA, Z.; KAPUSTENKO, P.; ARSENYEVA, O.; TOVAZHNYANSKY, L. Heat exchangers for energy recovery in waste and biomass to energy technologies - I. Energy recovery from flue gas. Applied Thermal Engineering, 2014, vol. 64, no. 1-2, p. 213-223. ISSN: 1359-4311.
Detail