Project detail

Výzkum a vývoj flexibilního energetického systému transformujícího primární energii biomasy i alternativních paliv při jejich spalování, popřípadě odpadní teplo z různých tepelných agregátů na elektrickou energii s možností kogenerace s vyšší účinností

Duration: 01.03.2009 — 31.12.2012

Funding resources

Ministerstvo průmyslu a obchodu ČR - TIP

- part funder (2009-03-01 - 2012-12-31)

On the project

Projekt je zaměřen na teor. popis, návrh a ověření nového energetického systému určeného k výrobě elektřiny, případně kogeneraci, s vysokou účinností transformace prim. energie tuhých, kapalných a plynných paliv i odpad. tepel, přičemž zdrojem mohou být klasická spal. zařízení. Systém pracuje na principu vlhkého Braytonova oběhu s nepřímým ohřevem prac. media. Zdrojem tepelného příkonu cca 3,5 MW pro demonstrační jednotku budou spaliny produkované plyn. hořákem spalující přebytkový koksárenský nebo směsný plyn, které budou zajišťovat ohřev prac. směsi pro pl. turbínu v soustavě výměníků na teplotu alespoň 800 C. Demonstrační jednotka v základním zapojení bude sloužit k ověření teor. principu oběhu, klíčových komponent, způsobu regulace oběhu a dynamických vlastností. Získané poznatky budou aplikovány při návrhu a výstavbě jednotek v řádech desítek MW transformující teplo paliv jejich spalováním nebo odpadní teplo produkované různými technologickými agregáty na energii elektrickou popř. kogeneraci.

Description in English
The aim of the project is to describe, design and verify new energy system for electricity production or cogeneration, with high efficiency of transformation of primary energy of solid, liquid and gas fuels and waste heat, whereas the source can be standard combustion facilities. The system is based on humid Brayton cycle with indirect heating of work media. The source of 3,5 MW heat input for demonstration unit will be the fluegas from gas burner combusting waste coke oven gas or mixture gas. The fluegas will heat up the working mixture for gas turbine in the exchangers to min. 800C. The demonstration unit in basic connection will serve to verify the theory of the cycle, the key components, regulation methods and dynamic properties. Acquired knowledge will be applied on the design and construction of units with an output of tens of MW transforming fuel heat or waste heat produced by different devices to electrical energy or cogeneration.

Keywords
flexibilní energetický systém, pevné palivo, odpad, demonstrační jednotka, vysokoteplotní výměníky, modifikovaná plynová turbína, separační kondenzátor, materiály,

Key words in English
Flexible energy system (FES); solid fuels; waste heat; demonstration unit; high temperature exchangers; modified gas turbine; separation condenser; materials; protective coatings

Mark

FR-TI1/073

Default language

Czech

People responsible

Stehlík Petr, prof. Ing., CSc., dr. h. c. - fellow researcher
Stárek Kamil, Ing., Ph.D. - principal person responsible

Units

Institute of Process Engineering
- (2009-03-01 - 2012-12-31)

Results

JEGLA, Z.; KILKOVSKÝ, B.; STEHLÍK, P.; STÁREK, K. Development of high temperature steam-air mixture heater for flexible energy system. In Proceedings of the 19th International Congress of Chemical and Process Engineering CHISA 2010. Praha: Process Engineering Publisher, Ing. Jan Novosad, 2010. p. 1200-1210. ISBN: 978-80-02-02248-0.
Detail

KILKOVSKÝ, B.; JEGLA, Z.; STEHLÍK, P. Comparison of Different Methods for Pressure Drop Calculation in 90deg and 180deg Elbows. Chemical Engineering Transactions, 2011, vol. 25, no. 1, p. 243-249. ISSN: 1974-9791.
Detail

JEGLA, Z.; ODSTRČIL, M.; KILKOVSKÝ, B.; KOHOUTEK, J. Kontrolní tepelně-hydraulické výpočty výměníku "OPVS" pro ohřev parovzduchové směsi pomocí vyvinutého výpočtového modelu. ÚPEI, FSI, VUT Brno: FSI, VUT Brno, 2010.
Detail

KILKOVSKÝ, B.; JEGLA, Z.; JONÁK, M. Comparison of methods for fluid pressure drop calculation in 180 deg elbows. In Proceedings of the 19th International Congress of Chemical and Process Engineering CHISA 2010. Praha: Process Engineering Publisher, Ing. Jan Novosad, 2010. p. 1194-1204. ISBN: 978-80-02-02248-0.
Detail