Publications

• 2020

  NÁVRAT, T.; HALABUK, D.; VOSYNEK, P. Efficiency of Plasticity Correction in the Hole-Drilling Residual Stress Measurement. Materials, 2020, vol. 13, no. 15, p. 1-15. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

• 2019

  KUBÍK, P.; ŠEBEK, F.; ZAPLETAL, J.; PETRUŠKA, J.; NÁVRAT, T. Ductile Failure Predictions for the Three-Point Bending Test of a Complex Geometry Made From Aluminum Alloy. Journal of Engineering Materials and Technology, 2019, vol. 141, no. 4, p. 1-12. ISSN: 0094-4289.
  Detail | WWW

  SLÁMA, D.; NÁVRAT, T.; KREJČÍ, P. Experimental FEM validation of the composite recurve bow. In Experimental Stress Analysis 2019. 2019. p. 475-481. ISBN: 978-80-214-5766-9.
  Detail

  BŘEZINA, M.; MAUDER, T.; KLIMEŠ, L.; ŠTĚTINA, J.; NÁVRAT, T.; PETRUŠKA, J. Coupled real-time thermo-mechanical solidification model of continuously cast steel. In METAL - 2019 - Abstracts, 28th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger s.r.o., 2019. p. 123-128. ISBN: 978-80-87294-92-5.
  Detail

• 2018

  NÁVRAT, T.; HALABUK, D.; VLK, M.; VOSYNEK, P. Eccentricity Effect in the Hole-Drilling Residual Stress Measurement. In Engineering and Innovative Materials VI. Defect and Diffusion Forum. Trans Tech Publications Ltd, 2018. p. 208-212. ISBN: 978-3-0357-1209-4. ISSN: 1662-9507.
  Detail

  ŘEHA, B.; VÁCLAVÍK, J.; NÁVRAT, T.; HALABUK, D. Residual Stresses in Railway Axles. In Residual Stresses 2018. 2018. p. 95-100. ISBN: 9781945291890.
  Detail

  VOSYNEK P., NÁVRAT T., KREJBYCHOVÁ A., PALOUŠEK D. Influence of process parameters of printing on mechanical properties of plastic parts produced by FDM 3D printing technology. In MATEC Web of Conferences. MATEC Web of Conferences. EDP Sciences, 2018. p. 1-6. ISSN: 2261-236X.
  Detail | WWW

  HALABUK, D.; NÁVRAT, T. The effect of third principal stress in the measurement of residual stresses by hole-drilling method. In MATEC Web of Conferences. MATEC Web of Conferences. EDP Sciences, 2018. p. 1-6. ISSN: 2261-236X.
  Detail

  KOČIŠ, J.; KELBL, M.; KOČIŠ, T.; NÁVRAT, T. Percutaneous versus open pedicle screw fixation for treatment of type A thoracolumbar fractures. EUR J TRAUMA EMERG S, 2018, vol. 1, no. 1, p. 1-6. ISSN: 1863-9933.
  Detail | WWW

  VRÁNA, R.; VOSYNEK, P.; KOUTNÝ, D.; NÁVRAT, T.; PALOUŠEK, D. Evaluation of mechanical behavior of 3D printed lattice structure by SLM: Experiment and FEA. In Experimental Stress Analysis - 56th International Scientific Conference. Czech Society for Mechanics, 2018. p. 443-449. ISBN: 978-80-270-4062-9.
  Detail | WWW

  HALABUK, D.; NÁVRAT, T. Thermomechanical assessment of fuel rod cladding made of zirconium alloy and silicon carbide material during reactivity-initiated accident. NUCLEAR SCIENCE AND ENGINEERING, 2018, vol. 189, no. 1, p. 69-81. ISSN: 0029-5639.
  Detail

• 2017

  PEČ, M.; VOSYNEK, P.; ŠEBEK, F.; NÁVRAT, T. Implementation of American weld connection standards into finite element computations. In 4th International Conference Recent Trends in Structural Materials. IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2017. p. 1-7. ISSN: 1757-8981.
  Detail | WWW | Full text in the Digital Library

  HALABUK, D.; NÁVRAT, T.; VLK, M. The issue of recommended hole diameters in ASTM E837-13a. In Experimental Stress Analysis 2017. Košice: Technical University of Košice, 2017. p. 8-14. ISBN: 978-80-553-3166-9.
  Detail

  BENEŠOVSKÝ, M.; NÁVRAT, T.; PETRUŠKA, J. Verification of fast algorithm for cross-roll straightening. In Engineering Mechanics 2017. 2017. p. 134-137. ISBN: 978-80-214-5497-2.
  Detail

• 2016

  PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F. Novel approach to computational simulation of cross roll straightening of bars. Journal of Materials Processing Technology, 2016, vol. 233, no. 7, p. 53-67. ISSN: 0924-0136.
  Detail

  PEČ, M.; KUBÍK, P.; ŠEBEK, F.; NÁVRAT, T.; PETRUŠKA, J. Modeling of the blast load effects in explicit dynamics. In Engineering Mechanics 2016. 2016. p. 442-445. ISBN: 978-80-87012-59- 8.
  Detail

  PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F.; BENEŠOVSKÝ, M. Optimal intermeshing of multi roller cross roll straightening machine. In AIP Conference Proceedings 1769. 2016. p. 120002-1 (120002-4 p.)ISBN: 978-0-7354-1427-3.
  Detail

• 2015

  KELBL, M.; KOČIŠ, J.; VESELÝ, R.; FLORIAN, Z.; NÁVRAT, T.; VOSYNEK, P. Biomechanical Testing of Spinal Segment Fixed by Arcofix System on the Swine Spine. Asian Spine Journal, 2015, vol. 9, no. 4, p. 503-510. ISSN: 1976-1902.
  Detail | WWW

  NÁVRAT, T.; VLK, M.; PEČ, M.; HOUFEK, L.; PETRUŠKA, J. Korekce vlivu plastizace při vyhodnocení zbytkové napjatosti metodou vrtání otvoru. In Výpočty konstrukcí metodou konečných prvků. 2015. p. 47-48. ISBN: 978-80-87012-56- 7.
  Detail

  PETRUŠKA, J.; NÁVRAT, T. Straightening of Circular Bars – Simulation and Experiment. In Proceedings of the 8th International Congress of Croatian Society of Mechanics. 2015. p. 1-6. ISBN: 978-953-7539-21- 4.
  Detail

  PETRUŠKA, J.; NÁVRAT, T. Optimization of leveling process by a fast simulation algorithm. In Manufacturing Engineering and Technology for Manufacturing Growth. IERI & PRESS, 2015. p. 105-108. ISBN: 978-1-61275-074- 3.
  Detail | WWW

• 2014

  PALOUŠEK, D.; KOUTNÝ, D.; NÁVRAT, T. Pilot study of the wrist orthosis design process. RAPID PROTOTYPING JOURNAL, 2014, vol. 20, no. 1, p. 27-32. ISSN: 1355-2546.
  Detail

  VRBKA, M.; KŘUPKA, I.; HARTL, M.; NÁVRAT, T.; GALLO, J.; GALANDÁKOVÁ, A. In situ measurements of thin films in bovine serum lubricated contacts using optical interferometry. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2014, vol. 228, no. 2, p. 149-158. ISSN: 0954-4119.
  Detail

  PETRUŠKA, J.; NÁVRAT, T. Numerical modelling of straightening process. Metal Forming, 2014, vol. XXV, no. 1, p. 39-51. ISSN: 0867- 2628.
  Detail

  NÁVRAT, T.; FLORIAN, Z.; KOČIŠ, J.; VOSYNEK, P. Biomechanical testing of spinal segment fixed by ArcoFix system. In ENGINEERING MECHANICS 2014. Brno: BUT, 2014. p. 424-427. ISBN: 978-80-214-4871-1.
  Detail

  FUIS, V.; JANÍČEK, P.; NÁVRAT, T. Stress Analysis of the Ceramics Heads with different Sizes under the Destruction Tests. World Academy of Science, Engineering and Technology, 2014, vol. 8, no. 12, p. 1748-1752. ISSN: 1307- 6892.
  Detail

  VOSYNEK, P.; VLK, M.; NÁVRAT, T. Review of Pressurized Vessel Structural Design – An Assessment of Total Life. In Advanced Development in Automation, Materials and Manufacturing. Applied Mechanics and Materials. 2014. p. 218-222. ISBN: 9783038352259. ISSN: 1660-9336.
  Detail

  ŠEBEK, F.; PETRUŠKA, J.; NÁVRAT, T. Euler- type algorithm applied to leveling process analysis. Engineering Mechanics, 2014, vol. 21, no. 3, p. 185-191. ISSN: 1802- 1484.
  Detail

  VOSYNEK, P.; NÁVRAT, T.; PEČ, M.; POŘÍZKA, J.; DIVIŠ, P. How the Decrease of Collagen or Mineral Affect the Fracture in the Turkey Long Bones. World Academy of Science, Engineering and Technology, 2014, vol. 8, no. 12, p. 1753-1756. ISSN: 1307-6892.
  Detail | WWW

  NÁVRAT, T.; PETRUŠKA, J. Eulerian Description of Rail Straightening Process. In Advanced Development in Automation, Materials and Manufacturing. Applied Mechanics and Materials. 2014. p. 213-217. ISBN: 9783038352259. ISSN: 1660- 9336.
  Detail

• 2013

  VRBKA, M.; NÁVRAT, T.; KŘUPKA, I.; HARTL, M.; ŠPERKA, P.; GALLO, J. Study of film formation in bovine serum lubricated contacts under rolling/sliding conditions. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2013, vol. 227, no. 5, p. 459-475. ISSN: 1350-6501.
  Detail

  ŠEBEK, F.; PETRUŠKA, J.; NÁVRAT, T. On Advance in Leveling Process of Long Products. In Engineering Mechanics 2013. Svratka: Institute of Thermomechanics, Prague, 2013. p. 502-509. ISBN: 978-80-87012-47- 5.
  Detail

  GALLO, J.; HARTL, M.; VRBKA, M.; NÁVRAT, T.; KŘUPKA, I. Co by měl vědět ortoped o biotribologii totální endoprotézy kyčelního kloubu. Acta Chirurgie Orthopaedicae et Traumatologie Čechoslovaca, 2013, vol. 80, no. 6, p. 377-385. ISSN: 0001- 5415.
  Detail | WWW

  PETRUŠKA, J.; NÁVRAT, T. Computational Simulation of Cross Roll Straightening. In SEECCM III. 2013. p. 548-555. ISBN: 978-960-99994-4- 1.
  Detail

  NÁVRAT, T.; VRBKA, M.; LAŠTŮVKA, J.; KŘUPKA, I.; HARTL, M.; GALLO, J. Effect of contact condition on film thickness formation in artificial joints. In Mechatronics 2013. Springer International Publishing Switzerland: Springer International Publishing, 2013. p. 863-868. ISBN: 978-3-319-02293- 2.
  Detail | WWW

  VRBKA, M.; NÁVRAT, T.; KŘUPKA, I.; HARTL, M.; GALLO, J. MAPPING OF FILM THICKNESS IN BOVINE SERUM LUBRICATED CONTACTS. Engineering Mechanics, 2013, vol. 20, no. 1, p. 27-41. ISSN: 1802- 1484.
  Detail

• 2012

  OMASTA, M.; PALOUŠEK, D.; NÁVRAT, T.; ROSICKÝ, J. Finite element analysis for the evaluation of the structural behaviour, of a prosthesis for trans- tibial amputees. MEDICAL ENGINEERING & PHYSICS, 2012, vol. 34, no. 1, p. 38-45. ISSN: 1350- 4533.
  Detail | WWW

  LAŠTŮVKA, J.; BOSÁK, D.; NÁVRAT, T.; VRBKA, M. Effect of Slide-to- roll Ratio on Film Thickness Formation in Bovine Serum Lubricated Contact. In Proceedings of the 50th Anuual Conference on Experimental Stress Analysis. Praha: Czech Technical University in Prague, 2012. p. 247-252. ISBN: 978-80-01-05060- 6.
  Detail

  PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F. A New Model for Fast Analysis of Leveling Process. Advanced Materials Research, 2012, vol. 586, no. 1, p. 389-393. ISSN: 1022- 6680.
  Detail

  VOSYNEK, P.; NÁVRAT, T.; HOUFEK, L. Vibration characteristic of the femoral bone. In Modelling and optimization of physical systems. Gliwice: Wydawnictwo Katedry Mechaniki Teoretycznej i Stosowanej, 2012. p. 31-34. ISBN: 978-83-60102-61- 9.
  Detail

  VOSYNEK, P.; HOUFEK, L.; KREJČÍ, P.; HOUFEK, M.; NÁVRAT, T. Přetvoření na headplate vývěvy. 2012.
  Detail

  BOSÁK, D.; LAŠTŮVKA, J.; VRBKA, M.; NÁVRAT, T.; HARTL, M.; KŘUPKA, I. MAPPING OF LUBRICATING FILM THICKNESS IN HUMAN HIP JOINT REPLACEMENTS. MM Science Journal, 2012, vol. 2012, no. 12, p. 378-381. ISSN: 1803- 1269.
  Detail | WWW

  BOSÁK, D.; LAŠTŮVKA, J.; VRBKA, M.; NÁVRAT, T.; HARTL, M.; KŘUPKA, I. Mapping of lubricating film thickness in human hip joint replacements. In 53rd International Conference of Machine Design Departments. 1. Brno: Brno University of Technology, 2012. p. 45-52. ISBN: 978-80-214-4533- 8.
  Detail

  VRBKA, M.; NÁVRAT, T.; KŘUPKA, I.; HARTL, M.; GALLO, J. EFFECT OF PROTEINS ON FILM FORMATION IN BOVINE SERUM LUBRICATED CONTACTS UNDER ROLLING/ SLIDING CONDITIONS. In ASME/STLE 2012 Joint Tribology Conference (IJTC2012). 1. Denver, Colorado, USA: ASME, 2012. p. 1-3. ISBN: 978-0-7918-4508- 0.
  Detail

  VRBKA, M.; NÁVRAT, T.; KŘUPKA, I.; HARTL, M.; GALLO, J.; ADAM, T. Effect of Proteins on Film Formation in Bovine Serum Lubricated Contacts. In 15th Nordic Symposium on Tribology (NORDTRIB 2012). 1. Trondheim, Norway: Norwegian University of Science and Technology, 2012. p. 91-91. ISBN: 978-82-14-05270- 1.
  Detail

  VOSYNEK, P.; NEČAS, D.; NÁVRAT, T. COMPARATIVE ANALYSIS OF DIFFERENT APPROACHS TO MODEL TRABECULAR AND COMPACT BONE IN LONG BONES. In 20th SVSFEM ANSYS Users' Group Meeting and Conference 2012. 2012. p. 300-308. ISBN: 978-80-260-2722- 5.
  Detail

• 2011

  ČIŽMÁŘ, I.; FLORIAN, Z.; NÁVRAT, T.; PALOUŠEK, D. A biomechanical study of a suture between the deltoid muscle and a free tendon graft for reconstruction of the elbow extension. Biomedical Papers, 2011, vol. 155, no. 1, p. 79-83. ISSN: 1213- 8118.
  Detail

  NÁVRAT, T.; FUIS, V.; HOUFEK, L.; VLK, M. Proceedings 49th International Scientific Conference, Experimental Stress Analysis 2011. Brno: 2011. p. 1-458.
  Detail

  FUIS, V.; NÁVRAT, T. Calculation of the ceramics Weibull parameters. An international Journal of Science, Engineering and Technology, World Academy of Science Engineering and Technology, 2011, vol. 58, no. 1, p. 642-647. ISSN: 2010- 376X.
  Detail

  VRBKA, M.; KŘUPKA, I.; SVOBODA, P.; ŠPERKA, P.; NÁVRAT, T.; HARTL, M.; NOHAVA, J. Effect of shot peening on rolling contact fatigue and lubricant film thickness within mixed lubricated non-conformal rolling/ sliding contacts. Tribology International, 2011, vol. 44, no. 12, p. 1726-1735. ISSN: 0301- 679X.
  Detail

  VRBKA, M.; ZIMMERMAN, M.; NÁVRAT, T.; KŘUPKA, I.; HARTL, M. Mapping of film thickness in bovine serum lubricated contacts. In International Conference on BioTribology (ICoBT 2011). 1. Londýn: Imperial College, 2011. p. 1-2.
  Detail

  JANŮ, I.; KOČIŠ, J.; NÁVRAT, T.; FLORIAN, Z.; WENDSCHE, P. Srovnávací analýza šroubů Socon CS a Socon v ošetření osteoporotických zlomenin torakolumbální páteře - biomechanická studie. Acta Chirurgie Orthopaedicae et Traumatologie Čechoslovaca, 2011, vol. 78, no. 4, p. 334-338. ISSN: 0001- 5415.
  Detail

• 2010

  FUIS, V.; NÁVRAT, T.; VOSYNEK, P. Analyses of the Shape Deviations of the Contact Cones of the Total Hip Joint Endoprostheses. In 6th World Congress of Biomechanics. IFMBE PROCEEDINGS. Singapore: Springer, 2010. p. 1451-1454. ISBN: 978-3-642-14514- 8. ISSN: 1680- 0737.
  Detail

  VOSYNEK, P.; NÁVRAT, T.; FUIS, V. Response analysis of bone mass of proximal femur to surface replacement of hip joint. In 6th World Congress of Biomechanics. IFMBE PROCEEDINGS. Singapore: SPRINGER, 233 SPRING STREET, NEW YORK, NY 10013, UNITED STATES, 2010. p. 807-810. ISBN: 978-3-642-14514- 8. ISSN: 1680- 0737.
  Detail

  NÁVRAT, T.; ŽENČICA, P.; PÁNIS, V.; VOSYNEK, P.; FUIS, V. Analysis of the influence of lumbosacral fusion on the adjacent moving segment. In 6th World Congress of Biomechanics. IFMBE PROCEEDINGS. Singapur: SPRINGER, 233 SPRING STREET, NEW YORK, NY 10013, UNITED STATES, 2010. p. 811-814. ISBN: 978-3-642-14514- 8. ISSN: 1680- 0737.
  Detail

  NÁVRAT, T.; FLORIAN, Z.; ŽENČICA, P.; VOSYNEK, P. Determination of mechanical properties of spinal segment with 360 fusion and total disk replacement by means of experimental modeling. Edinburgh: 2010.
  Detail

  VRBKA, M.; ŠAMÁNEK, O.; ŠPERKA, P.; NÁVRAT, T.; KŘUPKA, I.; HARTL, M. Effect of surface texturing on rolling contact fatigue within mixed lubricated non-conformal rolling/ sliding contacts. Tribology International, 2010, vol. 43, no. 8, p. 1457-1465. ISSN: 0301- 679X.
  Detail | WWW

  KOČIŠ, J.; NÁVRAT, T.; FLORIAN, Z.; WENDSCHE, P. Biomechanical testing of spinal segment fixed by thoracolumbar spine locking plate on the swine lumbar spine. Biomedical Papers, 2010, vol. 154, no. 4, p. 345-354. ISSN: 1213- 8118.
  Detail

  VOSYNEK, P.; NÁVRAT, T. Stress- strain analysis of different type of hip joint implant. Edinburgh: 2010.
  Detail

  URBANOVÁ, L.; SRNEC, R.; PROKS, P.; STEHLÍK, L.; FLORIAN, Z.; NÁVRAT, T.; NEČAS, A. Comparison of the Resistance to Bending Forces of the 4.5 LCP Plate-rod Construct and of 4.5 LCP Alone Applied to Segmental Femoral Defects in Miniature Pigs. ACTA VETERINARIA BRNO, 2010, vol. 79, no. 4, p. 613-620. ISSN: 0001-7213.
  Detail | WWW | Full text in the Digital Library

• 2009

  NÁVRAT, T.; FLORIAN, Z.; JANÍČEK, P.; ČIŽMÁŘ, I.; KOČIŠ, J.; WENDSCHE, P.; JANŮ, I.; REPKO, M.; JANÍČEK, P.; ROZKYDAL, Z.; FUIS, V.; VOSYNEK, P. Vybrané biomechanické experimentální studie pro klinickou ortopedii. Ortopedie, 2009, vol. 3, no. 2, p. 77-84. ISSN: 1802- 1727.
  Detail

  NÁVRAT, T.; VOSYNEK, P. Deformačně- napěťová analýza totální povrchové náhrady kyčelního kloubu. Ostrava: 2009.
  Detail

  JANÍČEK, P.; NÁVRAT, T.; FLORIAN, Z. Biomechanika, obor spoluřešící biomechanické problémy výpočtovým a experimentálním modelováním. Ortopedie, 2009, vol. 3, no. 2, p. 85-92. ISSN: 1802- 1727.
  Detail

• 2008

  PALOUŠEK, D.; NÁVRAT, T.; OMASTA, M.; ŠESTÁK, J. Loading character of transtibial prosthesis. In Modeling and optimization of physical systems. 2008. Gliwice: Wydawnictvo Katedry Mechaniki Stosowanej, 2008. p. 79-84. ISBN: 978-83-60102-50- 3.
  Detail

  NÁVRAT, T.; VRBKA, M.; FLORIAN, Z.; ROZKYDAL, Z. Strain- stress analysis of pathological hip joint after osteotomy. Engineering Mechanics, 2008, vol. 15, no. 5, p. 345-354. ISSN: 1802- 1484.
  Detail

  ČERNOHOUSOVÁ, I.; KOČIŠ, J.; NÁVRAT, T.; WENDSCHE, P.; FLORIAN, Z. Socon CS šrouby v léčení osteoportických zlomenin torakolumbální páteře. Znojmo: 2008.
  Detail

  PALOUŠEK, D.; NÁVRAT, T. Strain gauge measurement of transtibial prosthesis. Human biomechanics 2008. 2008. Praha: 2008. p. 39-40. ISBN: 978-80-01-04163- 5.
  Detail

  PALOUŠEK, D.; NÁVRAT, T.; ROSICKÝ, J.; HOUFEK, M.; KREJČÍ, P. Experimental Recognition of Loading Character of Transtibial Prosthesis. Engineering Mechanics, 2008, vol. 15, no. 5, p. 355-364. ISSN: 1802- 1484.
  Detail

• 2007

  POKORNÝ, P.; NÁVRAT, T.; KAŠPÁREK, J.; VRBKA, M. Ověření charakteristik ocelového lana závěsu výložníku u věžového jeřábu MB 1030. 11. In Zdvíhací zařízení v teorii a praxi 2007. Brno: VUT Brno 2007, 2007. p. 130-133. ISBN: 978-80-214-3391- 5.
  Detail

  NÁVRAT, T.; FUIS, V.; FLORIAN, Z.; HLAVOŇ, P. Strain - Stress Analysis of Surface Prosthesis of Hip Joint. In Journal of Biomechanics. 40. Taipei - Taiwan: 2007. p. 559-559.
  Detail

  NÁVRAT, T.; FLORIAN, Z.; CIENCIALA, J. Determination of Mechanical Properties of Spinal Segment after Implantation of DYNESYS Spinal Segment. In World Congress on Bioengineering 2007. Bangkok, Thailand: Biomedical Engineering Society, World Association for Chinese Biomedical Engineers, 2007. p. 181 ( p.)ISBN: 978-81-904262-8- 2.
  Detail

  HLAVOŇ, P.; FUIS, V.; FLORIAN, Z.; NÁVRAT, T. STRESS ANALYSIS OF THE RADIAL HEAD REPLACEMENT IN AN ELBOW ARTICULATION. In Journal of Biomechanics. 40. Taipei - Taiwan: 2007. p. 634-634.
  Detail

  HLAVOŇ, P.; NÁVRAT, T.; FUIS, V.; FLORIAN, Z. STRESS ANALYSIS OF THE RADIAL HEAD REPLACEMENTS IN AN ELBOW ARTICULATION. In World Congress on Bioengineering 2007. Bangkok, Thailand: 2007. p. 1-4. ISBN: 978-81-904262-8- 2.
  Detail

  NÁVRAT, T.; FLORIAN, Z.; JANÍČEK, P. Deformačně- napěťová analýza kyčelního kloubu s aplikací povrchové náhrady kyčle. Frejkovy dny 2007, Brno: 2007.
  Detail

  FUIS, V.; NÁVRAT, T.; HOUFEK, M.; HLAVOŇ, P. Stress analysis of the ceramic head of hip joint endoprosthesis under different loading. In Modelling and Optimization of Physical Systems. Gliwice, PL: Wydawnictwo Katedry Mechaniki Stosowanej, 2007. p. 47-50.
  Detail

  HOUFEK, M.; FUIS, V.; NÁVRAT, T.; HLAVOŇ, P. Design and Realization of Experimental Device for Particular Biomechanics. In Program and Abstracts. 1. Singapore: Biomedical Enginering Society, 2007. p. 1-4. ISBN: 978-81-904262-8- 2.
  Detail

  FUIS, V.; NÁVRAT, T.; HLAVOŇ, P.; KOUKAL, M.; HOUFEK, M. Analysis of contact pressure between the parts of total hip joint endoprosthesis with shape deviations. In The Proceedings of the XXI Congress of International Society of Biomechanics 2007. Taipei, Taiwan: Elsevier, 2007. p. 558-558.
  Detail

  FUIS, V.; KOUKAL, M.; HOUFEK, M.; HLAVOŇ, P.; NÁVRAT, T. Complex analysis of shape deviations of the head and the cup of the total hip joint endoprosthesis. In World Congress on Bioengineering 2007. Bangkok, Thailand: 2007. p. 1-4. ISBN: 978-81-904262-8- 2.
  Detail

  FLORIAN, Z.; FUIS, V.; NÁVRAT, T. Computational Modelling of the Biomechanical Systems Properties. In Simulation Modelling of Mechatronic Systems II. mechatronika. Brno: VUT v Brně, 2007. p. 243-254. ISBN: 978-80-214-3559- 9.
  Detail

  HOUFEK, M.; FUIS, V.; HLAVOŇ, P.; NÁVRAT, T. DEVELOPMENT OF EXPERIMENTAL DEVICE FOR SPINE SEGMENTS. In The Proceedings of the XXI Congress of International Society of Biomechanics 2007. Taiwan: Elsevier, 2007. p. 665-665.
  Detail

• 2006

  FUIS, V., HLAVOŇ, P., NÁVRAT, T. CALCULATION OF THE CERAMICS MATERIAL PARAMETERS FROM THE TESTING DESTRUCTIONS OF THE HEADS. In Engineering Mechanics 2006. Svratka: ÚTAM AV ČR, 2006. p. 76 ( p.)ISBN: 80-86246-27- 2.
  Detail

  FUIS, V.; HLAVOŇ, P.; NÁVRAT, T. CALCULATION OF WEIBULL MATERIAL PARAMETERS OF THE CERAMIC HEAD. In Modelling and optimization of physical systems. Wisla: Katerda Mechaniky Stosovanej, Gliwice, 2006. p. 15 ( p.)ISBN: 83-60102-30- 9.
  Detail

  NÁVRAT, T.; FLORIAN, Z.; FUIS, V.; ŠTEKL, M. Strain Stress Analysis of Hip Joint with Surface Replacement, Simulation of Gaint. In Human Biomechanics 2006. Hrotovice: BUT FME Brno, 2006. p. 150-151. ISBN: 80-214-3232- 2.
  Detail

  NÁVRAT, T.; VRBKA, M.; POKORNÝ, P.; KAŠPÁREK, J. Deformačně- napěťová analýza stavebního věžového jeřábu. In 14. ANSYS Users Meeting 2006. Brno: SVS FEM, 2006. p. 1-8. ISBN: 80-239-7764- 4.
  Detail

  NÁVRAT, T.; FUIS, V.; HLAVOŇ, P.; JANÍČEK, P. Strain - Stress Analysis of Artificial Hip Joint, Influence of Bearing Material on Contact Pressure. In World Congress on Medical Physics and Biomedical Engineering. Seoul: Springer- Verlag Berlin Heidelberg, 2006. p. 2822-2825. ISBN: 3-540-36839- 6.
  Detail

  ŠTEKL, M.; NÁVRAT, T.; FLORIAN, Z.; FUIS, V. Influence of femoral head size and head/ cup fit on mechanical interaction between the head and the cup of the THR. In Human Biomechanics 2006. Hrotovice: 2006. p. 196-197. ISBN: 80-214-3232- 2.
  Detail

  SANT, Z.; FLORIAN, Z.; N. BORG, J.; NÁVRAT, T. Effect of different loads on the lumbar spine fusion. In Human Biomechanics 2006. Hrotovice: 2006. p. 180-181. ISBN: 80-214-3232- 2.
  Detail

  FUIS, V.; NÁVRAT, T.; HLAVOŇ, P.; JANÍČEK, P. Calculation of the material parameters of bioceramics from the destructions hip joint heads. In HUMAN BIOMECHANICS 2006. Hrotovice: 2006. p. 84 ( p.)ISBN: 80-214-3232- 2.
  Detail

  FUIS, V., NÁVRAT, T., KREJSA, J. Stress analysis of hip joint with the shape deviations of the contact cone. In HUMAN BIOMECHANICS 2006. Hrotovice: 2006. p. 86 ( p.)ISBN: 80-214-3232- 2.
  Detail

  HLAVOŇ, P.; FUIS, V.; NÁVRAT, T.; FLORIAN, Z.; JANÍČEK, P. Stress - deformation analysis of an elbow articulation with radial head replacement. In World Congress on Medical Physics and Biomedical engineering 2006. Seoul, Jižní Korea: Springer, 2006. p. 1-4. ISBN: 3-540-36839- 6.
  Detail

  FUIS, V.; NÁVRAT, T.; HLAVOŇ, P.; JANÍČEK, P. Reliability of the Ceramic Head of the Total Hip Joint Endoprosthesis Using Weibull's Weakest- link Theory. In World Congress on Medical Physics and Biomedical engineering 2006. IFMBE proceedings, Volume 14. Seoul: Springer, 2006. p. 2818 ( p.)ISBN: 3-540-36839- 6.
  Detail

  ŠTEKL, M.; NÁVRAT, T. Vliv polohy jamky na deformačně- napěťové stavy v kyčelním spojení s aplikovanou TEP. In Computational Mechanics 2006. Plzeň: Západočeská Univerzita v Plzni, 2006. p. 623-630. ISBN: 80-7043-477- 5.
  Detail

  VAVERKA, M.; NÁVRAT, T.; VRBKA, M.; FLORIAN, Z.; FUIS, V. Stress And Strain Analysis of The Hip Joint Using FEM. Technology and Health Care, Int. Journal of Health Care Engineering, 2006, vol. 14, no. 4- 5, p. 271-279. ISSN: 0928- 7329.
  Detail

  BŘEZINA, T.; FLORIAN, Z.; HOUŠKA, P.; HOUFEK, L.; ONDROUŠEK, V.; HOUFEK, M.; BŘEZINA, L.; NÁVRAT, T. Device for Experimental Modelling of Biomechanical Systems Properties. In Simulation Modelling of Mechatronic Systems II. mechatronika. Brno: VUT v Brně, 2006. p. 225-251. ISBN: 80-214-3341- 8.
  Detail

  FLORIAN, Z.; FUIS, V.; NÁVRAT, T.; ŠTEKL, M.; KOUKAL, M. Computational modeling of the biomechanical systems properties. In Simulation Modelling of Mechatronic Systems II. mechatronika. Brno: VUT v Brně, 2006. p. 253-276. ISBN: 80-214-3341- 8.
  Detail

  HORÁČKOVÁ, L.; KRUPA, P.; VARGOVÁ, L.; NÁVRAT, T.; FLORIAN, Z.; ROZKYDAL, Z. Příspěvek k problematice stavby proximálního konce femuru. 11. Kubátův podologický den " vliv životnoního stylu na vývoj pohybového aparátu". Praha: 2006.
  Detail

  PETRUŠKA, J.; NÁVRAT, T. Výpočty konstrukcí metodou konečných prvků 2006. Brno: 2006. ISBN: 80-214-3318- 3.
  Detail

• 2005

  BŘEZINA, T.; FLORIAN, Z.; HOUFEK, L.; NÁVRAT, T.; NEVRLÝ, J.; ONDROUŠEK, V.; SINGULE, V. Device for Experimental Modelling of Properties of Biomechanical Systems. In Simulation modeling of mechatronic systems I. Mechatronics. Praha: 2005. p. 93-110. ISBN: 80-214-3144- X.
  Detail

  FUIS, V.; KREJČÍ, P.; NÁVRAT, T. Engineering mechanics 2005. Svratka: 2005. ISBN: 80-85918-93- 5.
  Detail

  NÁVRAT, T. Deformačně- napěťová analýza kyčelního kloubu s aplikovanou povrchovou náhradou. Deformačně- napěťová analýza kyčelního kloubu s aplikovanou povrchovou náhradou. Vědecké spisy Vysokého učení technického v Brně , Edice PhD Thesis. Edice PhD Thesis, sv. 298. Brno: 2005. ISBN: 80-214-2861- 9. ISSN: 1213- 4198.
  Detail

  FLORIAN, Z., NÁVRAT, T. Deformačně- napěťová analýza kyčelního kloubu s aplikovanou povrchovou náhradou. In Aplikovaná mechanika 2005. Brno: Ústav mechaniky těles, mechatroniky a biomechaniky, FSI VUT v Brně, 2005. p. 77 ( p.)ISBN: 80-214-2373- 0.
  Detail

  HOUFEK, L.; NÁVRAT, T.; VLK, M.; FUIS, V. Experimental Stress analysis 2005. Skalský Dvůr: 2005. ISBN: 80-214-2941- 0.
  Detail

  FUIS, V., NÁVRAT, T. Stress analysis of the hip joint endoprosthesis with shape deflections. Inženýrská mechanika - Engineering Mechanics, 2005, vol. 12, no. 5, p. 323 ( p.)ISSN: 1210- 2717.
  Detail

  NÁVRAT, T.; FLORIAN, Z.; FUIS, V. The stain- stress analysis of hip joint with total hip resurfacing arthroplasty. Inženýrská mechanika - Engineering Mechanics, 2005, vol. 12, no. 5, p. 315 ( p.)ISSN: 1210- 2717.
  Detail

  FLORIAN, Z.; REPKO, M.; NÁVRAT, T.; FUIS, V. Experimentální ověřování mechanických vlastností kliček a páteřních háčků při operační terapii neuromuskulárních deformit páteře a pánve způsobem dle Luqueho a Galvestonea. In Experimental stress analysis 2005. Brno: 2005. p. 17 ( p.)ISBN: 80-214-2941- 0.
  Detail

• 2004

  Šlechtová, J. Kočiš, M., Florian, Z., Návrat, T. Computational and experiemtal modelling of the backbone element with applied fixator. In Engineering Mechanics. Svratka: 2004. p. 279 ( p.)ISBN: 80-85918-88- 9.
  Detail

  ŠLECHTOVÁ, M., KOČIŠ, J., FLORIAN, Z., NÁVRAT, T. Komplexní modelování páteřního prvku s krčními fixátory. In Experimental Stress Analysis 2004. Kašperské Hory: Škoda výzkum s. r. o., 2004. p. 257 ( p.)ISBN: 80-239-2964- X.
  Detail

  ŠLECHTOVÁ, M., KOČIŠ, J., FLORIAN, Z., NÁVRAT, T. VÝPOČTOVÉ A EXPERIMENTÁLNÍ MODELOVÁNÍ PÁTEŘNÍHO PRVKU S APLIKOVANÝM FIXÁTOREM. In Aplied Mechanics 2004. Bratislava: Department of Strenght of Materials, Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava, 2004. p. 271 ( p.)ISBN: 80-227-2030- 5.
  Detail

  FLORIAN, Z.; ČIŽMÁŘ, I.; NÁVRAT, T. Experimentální modelování šlachových stehů. In Experimental Stress Analysis. Plzeň: Škoda výzkum s.r. o, 2004. p. 51 - 54 ( p.)ISBN: 80-239-2964- X.
  Detail

  ŠLECHTOVÁ, M., KOČIŠ, J., Florian, Z., Návrat, T. Computational and experiemtal modelling of the backbone element with applied fixator. In Mechanical Engineering 2004. Bratislava: Slovak University if Technology in Bratislava, 2004. p. 65 ( p.)ISBN: 80-227-2105- 0.
  Detail

  NÁVRAT, T.; FLORIAN, Z. STRAIN STRESS ANALYSIS OF TOTAL SURFACE REPLACEMENT. In Mechanical Engineering 2004. Bratislava: Slovak Univerzity of Technology in Bratislava, 2004. p. 63 ( p.)ISBN: 80-227-2105- 0.
  Detail

  NÁVRAT, T.; FLORIAN, Z. DEFORMAČNĚ NAPĚŤOVÁ ANALÝZA RŮZNÝCH TYPŮ TOTÁLNÍ POVRCHOVÉ NÁHRADY KYČELNÍHO KLOUBU. In Applied mechanics 2004. Bratislava: Slovak Univerzity of Technology in Bratislava, 2004. p. 213 ( p.)ISBN: 80-227-2030- 5.
  Detail

  TOŠOVSKÝ, J., FLORIAN, Z., NÁVRAT, T. Experimental detection of mechanical properties of vertebral element with applied MACS TL- Twin Screw Implant. In Experimental Stress Analysis 2004. Plzeň: Czech Society for Mechanics, branch Plzeň, ŠKODA VÝZKUM s.r.o., 2004. p. 256 ( p.)ISBN: 80-239-2964- X.
  Detail

  NÁVRAT, T., FLORIAN, Z. Deformačně – napěťová analýza kyčelního kloubu s aplikovanou povrchovou náhradou. In XII. Frejkovy dny s mezinárodní účastí. Brno: Masarykova univerzita v Brně, 2004. p. 14 ( p.)ISBN: 80-210-3430- 0.
  Detail

• 2003

  NÁVRAT, T.; FLORIAN, Z. Napěťově deformační analýza fyziologického kyčelního kloubu se stochasticky zadanými materiálovými vlastnostmi. In Ansys & Star- CD Users Meeting 2003. Brno: SVS FEM, 2003. p. 1 ( p.)ISBN: 80-239-1598- 3.
  Detail

  ŠLECHTOVÁ, M., KOČIŠ, J., FLORIAN, Z., NÁVRAT, T. Výpočtové a experimentální modelování páteřního prvku s aplikovaným fixatorem. In Výpočtová mechanika 2003. Nečtiny: 2003. p. 445 ( p.)ISBN: 80-7082-999- 0.
  Detail

  ŠLECHTOVÁ, M., KOČIŠ, J., FLORIAN, Z., NÁVRAT, T. Experimentální a výpočtové modelování páteřního prvku s aplikovaným fixátorem Cervi- Lok. In Experimental Stress Analysis 2003. Brno: Ústav mechaniky Těles FSI VUT v Brně, 2003. p. 97 ( p.)ISBN: 80-214- 2314.
  Detail

  NÁVRAT, T.; FLORIAN, Z. Experimental Determination of Mechanical Properties of Bone Cement. In Experimental Stress Analysis 2003. Brno: FSI VUT v Brně, 2003. p. 69 ( p.)ISBN: 80-214-2314- 5.
  Detail

  NÁVRAT, T., FLORIAN, Z., FUIS, V. Využití MKP při posuzování totálních endoprotéz kyčelního kloubu. In Výpočty 2003 - výpočty konstrukcí metodou konečných prvků. Brno: ÚMT FSI VUT v Brně, 2003. p. 19 ( p.)ISBN: 80-214-2489- 3.
  Detail

  VAVERKA, M., VRBKA, M., NÁVRAT, T., FLORIAN, Z. Computational Modelling of the Hip in Reference to Clinical Requirements. In Applied Mechanics. Gliwice: Politechnika Slaska, Katedra mechaniky stosovanej, 2003. p. 201 ( p.)ISBN: 83-917224-3- 0.
  Detail

  NÁVRAT, T.; FLORIAN, Z. Stress Strain Analysis of Total Surface Replacement of Hip Joint for Variety of Interfaces between Implant and Bone. In Mechatronics, Robotics and Biomechanics 2003. Brno: FSI VUT v Brně, 2003. p. 167 ( p.)ISBN: 80-214-2312- 9.
  Detail

• 2002

  NÁVRAT, T., FLORIAN, Z. Napěťově deformační analýza totální povrchové náhrady kyčelního kloubu. In Výpočtová mechanika 2002. Plzeň: Zapadočeská univerzita v Plzni, 2002. p. 303 ( p.)ISBN: 80-7082-903- 6.
  Detail

  NÁVRAT, T.; FLORIAN, Z. Stress Strain Analysis of the Total Surface Replacement of the Hip Joint. In Biomechanics of Man 2002. Praha: Charles Univerzity in Prague, 2002. p. 217 ( p.)ISBN: 80-86317-23- 4.
  Detail

*) Publications are generated once a 24 hours.