doc. Ing.

Radek Vlach

Ph.D.

FME, ISMMB DM – Associate professor

+420 54114 2860
vlach.r@fme.vutbr.cz

Send BUT message

doc. Ing. Radek Vlach, Ph.D.

Publications

  • 2023

    PRUŠA, R.; HUZLÍK, R.; VLACH, R. Complex drive model of linear synchronous motor with variable load. MM Science Journal, 2023, vol. March 2023, no. 1, p. 6398-6406. ISSN: 1803-1269.
    Detail | WWW

  • 2019

    MUSIL, F.; VLACH, R. Coupled Model of Solenoid. In Mechatronics 2019: Recent Advances Towards Industry 4.0. Warsaw, Poland: Springer Verlag, 2019. p. 45-53. ISBN: 978-3-030-29992-7.
    Detail | WWW

    VLACH, R.; MUSIL, F. Coupled Modeling of Permanent Magnet Generator Cooling using CFD. In 2018 18th International Conference on Mechatronics - Mechatronika (ME). 1. 2019. p. 564-569. ISBN: 978-80-214-5543-6.
    Detail

  • 2016

    BÁRTA, J.; ONDRŮŠEK, Č.; LOŠÁK, P.; VLACH, R. Design of High-Speed Induction Machine for the 6 kW, 120 000 rpm Helium Turbo-Circulator. In USB Proceedings 2016 XXII International Conference on Electrical Machines (ICEM). 2016. p. 1552-1558. ISBN: 978-1-5090-2537-4.
    Detail | WWW

    VLACH, R.; HUZLÍK, R. Thermal Model of High Speed Asynchronous Machine. In Mechatronika 2016. 2016. p. 256-260. ISBN: 978-80-01-05882-4.
    Detail | WWW

  • 2014

    LOŠÁK, P.; VLACH, R. Study of the response of the shaft loaded by Unbalanced Magnetic Pull. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of technology, 2014, 2014. p. 79-84. ISBN: 978-80-214-4817- 9.
    Detail

    NOVOTNÝ, R.; VLACH, R.; KADLEC, J.; KUCHTA, R. Optimization of ceramics bonding in the area of pressure sensor manufacturing. Microsystem Technologies, 2014, vol. 20, no. 4-5, p. 719-728. ISSN: 0946-7076.
    Detail

    ANČÍK, Z.; HADAŠ, Z.; VLACH, R.; JANÁK, L.; SINGULE, V.; PROCHÁZKA, P. Simulation Modelling of MEMS Thermoelectric Generator for Aircraft Applications. In 16th INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE AND EXPOSITION (PEMC 2014). 1. Antalya: Gazi University, Turkey, 2014. p. 265-270. ISBN: 978-1-4799-2060- 0.
    Detail | WWW

    VLACH, R. Novel Approach to Thermoelectric Generator Modeling as Energy Harvesting System. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of technology, 2014. p. 725-728. ISBN: 978-80-214-4817- 9.
    Detail

  • 2013

    VLACH, R. Complex Model of Asynchronous Machine as Traction Machine in Mining. In Mechatronics 2013. 2013. p. 323-329. ISBN: 978-3-319-02293- 2.
    Detail

    NOVOTNÝ, R.; VLACH, R.; KADLEC, J.; KUCHTA, R. Ceramic joints for pressure sensors development. In Proceedings of the SPIE, Volume 8763, id. 876309. 876309. Grenoble, France: Society of Photo-Optical Instrumentation Engineers (SPIE), 2013. p. 1-9. ISBN: 9780819495600.
    Detail

    VLACH, R. Coupled Thermal- Structural Transient Analysis of Pressure Sensors. In Mechatronics 2013. 2013. p. 495-501. ISBN: 978-3-319-02293- 2.
    Detail

    ANČÍK, Z.; VLACH, R.; JANÁK, L.; KOPEČEK, P.; HADAŠ, Z. Modeling, simulation and experimental testing of the MEMS thermoelectric generators in wide range of operational conditions. In Proceedings of SPIE Smart Sensors, Actuators, and MEMS IV. 8763. Bellingham, Washington, USA: SPIE, 2013. p. 87631M- 1 (87631M-10 p.)ISBN: 9780819495600.
    Detail

  • 2012

    ANČÍK, Z.; TOMAN, J.; VLACH, R.; HUBÍK, V. Modeling of Thermal Phenomena in Liquid Cooling System for Aircraft Electric Unit. IEEE Transactions on Industrial Electronics, 2012, vol. 2011, no. 99, p. 1 (1 s.). ISSN: 0278- 0046.
    Detail

  • 2011

    VLACH, R. Thermal modelling of powerful traction battery charger. In Mechatronics Recent Technogical and Scientific Advances. 2011. p. 175-187. ISBN: 978-3-642-23243- 5.
    Detail

    CHALUPA, M.; VEVERKA, J.; VLACH, R. DYNAMIC LOADING OF VEHICLE TRACK SIMULATION. In Engineering Mechanics 2011, 17th International conference may 9-12, 2011, Svratka, Czech republic. 2011. Prague: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, 2011. p. 227-230. ISBN: 978-80-87012-33- 8.
    Detail

  • 2010

    URBAN, F.; KADLEC, J.; VLACH, R.; KUCHTA, R. Design of pressure sensor based on optical fiber Bragg grating lateral deformation. SENSORS, 2010, vol. 10, no. 12, p. 11212-11225. ISSN: 1424-8220.
    Detail | WWW | Full text in the Digital Library

    VLACH, R. HEATING PREDICTION OF ELECTRIC MACHINE USING NEURAL NETWORK. In MENDEL 2010 - 16th International Conference on Soft Computing. Brno: 2010. p. 298-302. ISBN: 978-80-214-4120- 0.
    Detail

  • 2009

    SIKORA, M.; VLACH, R. The Dynamic Model of Stirling Engine Crank Mechanism with Connected Electric Generator. Applied andComputational Mechanics, 2009, vol. 3, no. 1, p. 185-194. ISSN: 1802- 680X.
    Detail

  • 2008

    KADLEC, J.; HELÁN, R.; URBAN, F.; VLACH, R.; VRBA, R. Temperature calibrated design of the optical pressure sensor capsule. In Proceedings of the EDS 08 conference. Brno: Ing. Zdeněk Novotný CSc., 2008. p. 1-6. ISBN: 978-80-214-3717- 3.
    Detail

  • 2007

    VLACH, R. DC MACHINE COOLING BY HEAT PIPE. In LVEM - Low Voltage Electrical Machines 2007. Brno: 2007. p. 108 ( p.)ISBN: 978-80-214-3560- 5.
    Detail

    VLACH, R.; GREPL, R.; KREJČÍ, P. Control of Stator Winding Slot Cooling by Water Using Prediction of Heating. In ICM2007 4th IEEE international Conference on Mechatronics. Kumamoto, Japan: IEEE, 2007. p. 5-9. ISBN: 1-4244-1184- X.
    Detail

    VLACH, R. Thermal model of control non- convectional winding slot cooling by water. In Modeling and optimalization of physical systems. 2007. p. 157-162.
    Detail

    VLACH, R. Predictor for Control of Stator Winding Water Cooling of Synchronous Machine. In Recent Advances in Mechatronics. Mech. Berlín: Springer, 2007. p. 190-194. ISBN: 978-3-540-73955- 5.
    Detail

    KREJČÍ, P.; VLACH, R.; GREPL, R. Sensor of contact force vector. In ICM2007. Kumamoto. Japan: IEEE, 2007. p. 1-4. ISBN: 1-4244-1184- X.
    Detail

    SIKORA, M.; VLACH, R. Thermal Model of Stirling Engine with Using the Control Volumes Method. In Modelling and optimization of physical systems. Gliwice 2007. Gliwice, Polsko: Wydawnictwo Katedry Mechaniky Stosowanej, 2007. p. 137-142.
    Detail

    SIKORA, M.; VLACH, R. Simulation of Stirling engine working cycle. In Recent Advances in Mechatronics. Mech. Berlin: Springer, 2007. p. 42-46. ISBN: 978-3-540-73955- 5.
    Detail

    GREPL, R.; VLACH, R.; KREJČÍ, P. Modelling of Unilateral Constraints for Virtual Prototyping in SimMechanics. In Int. Conf. on Mechatronics. 1. Kumamoto: KUmamoto universtity, 2007. p. 37-37.
    Detail

  • 2006

    VLACH, R.; SIKORA, M. Virtual Model of Stirling Engine. In Simulation Modeling of Mechatronic systems II. mechatronika. 2006. p. 215-222. ISBN: 80-214-3341- 8.
    Detail

    GREPL, R., VLACH, R., KREJČÍ, P. An Effective Approach To Design Of Interactive Mechatronic System. In Engineering mechanics 2006. Svratka: ÚT AVČR, 2006. p. 82-83. ISBN: 80-86246-27- 2.
    Detail

    VLACH, R. Strain Analysis of Frame Foots of Elevator Machines of type SVM250. 2006.
    Detail

    VLACH, R. Control of Stator Winding Slot Cooling by Water. In Simulation Modeling of Mechatronics systems II. mechatronika. 2006. p. 75-83. ISBN: 80-214-3341- 8.
    Detail

    VLACH, R., GREPL, R., KREJČÍ, P. Ŕízení nekonvenčního cházení statorového vinutí vodou. In Engineering Mechanics 2006. Praha: 2006. p. 424 ( p.)ISBN: 80-86246-27- 2.
    Detail

    KREJČÍ, P.; VLACH, R.; GREPL, R. CONTACT SENSOR FOR ROBOTIC APPLICATIONS - VERIFICATION OF FUNCTIONALITY. In Engineering Mechanics 2006. 1. Svratka: Ústav termomechniky AVČR, 2006. p. 182-183. ISBN: 80-86246-27- 2.
    Detail

    SIKORA, M.; VLACH, R. The numerical model of alfa Stirling engine modification. In Simulation modelling of mechatronic system III. Mechatronics. Brno: Brno University of Technology, 2006. p. 219-227. ISBN: 978-80-214-3559- 9.
    Detail

  • 2005

    VLACH, R. COMPUTATIONAL AND EXPERIMENTAL MODELLING OF NON- CONVECTIONAL WINDING SLOT COOLING. Inženýrská mechanika - Engineering Mechanics, 2005, vol. 2005, no. 12, p. 209 ( p.)ISSN: 1210- 2717.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P.; KAPLAN, Z.; VLACH, R. Virtual Prototypes of External Heat Supply Engines. In Simulation Modelling of Mechatronic Systems I. Mechatronika. Brno: Faculty of Mechanical Engineering, Brno University of Technology, 2005. p. 197-206. ISBN: 80-214-3144- X.
    Detail

    VLACH, R. PARAMETRICKÝ MODEL PŘÍMÉHO CHLAZENÍ VINUTÍ SYNCHRONNÍHO MOTORU VODOU. In Engeneering Mechanics 2005. 2005. p. 341 ( p.)ISBN: 80-214-2940- 4.
    Detail

    VLACH, R. Parametric Model of Synchrnous Machine Winding Cooling by Heat Pipe. In Engineering Mechanics2005. Praha: 2005. p. 341 ( p.)ISBN: 80-85918-93- 5.
    Detail

  • 2004

    VLACH, R., ONDRŮŠEK, Č. Cooling of Synchronous Machine Winding Using Heat Pipe. In Engineering Mechanics 2004. Praha: 2004. p. 317 ( p.)ISBN: 80-85918-88- 9.
    Detail

    VLACH, R., ONDRŮŠEK, Č., GREPL, R. Computational and Experimental Simulation of Synchronous Generator Ventilation. In Fracture Methodologies and Manufacturing Processes. San Diego: ASME, 2004. p. 139 ( p.)ISBN: 0-7918-4669- 5.
    Detail

    VLACH, R., ONDRŮŠEK, Č. Computational and Experimental Modeling of Synchronous Generator Fan. In Engineering Meachanics 2004. Praha: 2004. p. 315 ( p.)ISBN: 80-85918-88- 9.
    Detail

    VLACH, R. Chlazení elektrických strojů. Brno: 2004. 28 p. ISBN: 80-214-2848- 1.
    Detail

    VLACH, R., ONDRŮŠEK, Č. Comparison of Synchronous Machine Cooling Using Heat Pipe and Water Cooling. Elektronika, 2004, vol. 2004, no. 8- 9, p. 195 ( p.)ISSN: 0033- 2089.
    Detail

    VLACH, R. Experimentální ověření vlastností tepelné trubice. In Modelování a měření v termomechnice kontinua. Plzeň: 2004. p. 219 ( p.)ISBN: 80-02-01654- 8.
    Detail

    GREPL, R., VLACH, R., ONDRŮŠEK, Č. Complex Dynamic Modelling of Mobile Robot. In Fracture Methodologies and Manufacturing Processes. ASME/ JSME Pressure Vessels and Piping Conference. San Diego, USA: ASME, 2004. p. 145 ( p.)ISBN: 0-7918-4669- 5.
    Detail

    VRBA, R., KADLEC, J., GROSMANOVÁ, Z., BRADÁČ, Z., KUČERA, P., FIEDLER, P., ZEZULKA, F., VLACH, R. Senzor pro snímání diference tlaku. MPO. Brno, Buchlovice: MPO, 2004. p. 0 ( p.)
    Detail

  • 2003

    VLACH, R. Výpočtově - experimentální modelování ventilátoru synchronního generátoru. In Vybrané problémy elektrických strojů a pohonů. Brno: 2003. p. 285 ( p.)ISBN: 80-214-2400- 1.
    Detail

    VLACH, R., ONDRŮŠEK, Č. Control of electric machine Ventilation Using Artificial intelligence. In Engineering mechanics 2003. Brno: 2003. p. 372 ( p.)ISBN: 80-86246-18- 3.
    Detail

    GREPL, R., VLACH, R., KRATOCHVÍL, C. Návrh tepelného modelu stejnosměrného motoru pro řízené momentové přetěžování. In Výpočtová mechanika 2003. Plzeň: 2003. p. 89 ( p.)ISBN: 80-7082-999- 0.
    Detail

    VLACH, R., GREPL, R., CHALUPA, M., ONDRŮŠEK, Č. Výpočtové modelování dynamických vlastností pásového vozidla. In Computational Mechanics 2003. Plzeň: 2003. p. 505 ( p.)ISBN: 80-7082-999- 0.
    Detail

    GREPL, R., VLACH, R. Computational Modelling of Thermal Behavior of DC Motor. In EPVE 2003. Brno: 2003. p. 155 ( p.)ISBN: 80-214-2497- 4.
    Detail

    CHALUPA, M., VLACH, R., KOTEK, V. Choice Parameters Influence at Vehicle Track Behavior. In Engineering mechanics 2003. Brno: 2003. p. 124 ( p.)ISBN: 80-86246-18- 3.
    Detail

    VLACH, R., ONDRŮŠEK, Č. HEATING PREDICTION OF ELECTRIC MACHINE USING NEURAL NETWORK. In International Conference Mechatronics, Robotics and Biomechanics 2003. UMT FSI VUT Brno. Brno: 2003. p. 93 ( p.)ISBN: 80-214-2312- 9.
    Detail

  • 2002

    VLACH, R., ONDRŮŠEK, Č. Komplexní model synchronního motoru. In Inženýrská mechanika 2002. 2002. p. 307 ( p.)ISBN: 80-214-2109- 6.
    Detail

    GREPL, R., VLACH, R., ONDRŮŠEK, Č. Návrh tepelného modelu krokového motoru. In EPVE 2002. Brno, Česká republika: 2002. p. 226 ( p.)ISBN: 80-214-2246- 7.
    Detail

    VLACH, R. Řízení ventilace elektrického stroje s využitím umělé inteligence. Brno: 2002.
    Detail

    VLACH, R., CHALUPA, M., KOTEK, V. Vliv vypraných parametrů na chování lyže pro jízdu po trávě. In Inženýrská mechanika 2002. Brno: 2002. p. 309 ( p.)ISBN: 80-214-2109- 6.
    Detail

    VLACH, R. Řízení ventilace elektrického stroje s využitím umělé inteligence. 2002. 26 p.
    Detail

    VLACH, R., ONDRŮŠEK, Č. Komplexní model synchronního motoru. In Inženýrská mechanika 2002. Brno: Institud of mechanics of solids, 2002. p. 307 ( p.)ISBN: 80-214-2109- 6.
    Detail

  • 2001

    KREJČÍ, P., VLACH, R. Optimization of ventilation network parameters of asynchronous generator by genetic algorithm. Zeszyty Naukowe Politechniki Slaskej - Elektryka, 2001, vol. 177, no. 05, p. 45 ( p.)ISSN: 0072- 4688.
    Detail

    VLACH, R. VENTILAČNÍ MĚŘENÍ SYNCHRONNÍHO MOTORU S VLASTNÍM ZDROJEM VENTILACE. In Vybrané problémy elektrických strojů a pohonů 2001. Brno: UVEE FEKT VUT Brno, 2001. p. 1000 ( p.)ISBN: 80-7580-125- 2.
    Detail

    VLACH, R. 3D ventilační síť synchronního motoru se zdrojem cizí ventilace. In Aplikovaná mecchanika 2001. 2001. p. 1 ( p.)ISBN: 80-217-1887- 1.
    Detail

    VLACH, R. Modelování ventilace synchronního motoru pomocí CFD. In Měření, analýza a identifikace parametrů pro simulační modely asynchronních strojů. Brno: UVEE FEKT VUT Brno, 2001. p. 100 ( p.)ISBN: 80-214-1979- 2.
    Detail

    VLACH, R. Analýza chování lyže pro jízdu po trávě. In Inženýrská mechanika 2001. Praha: ČVUT Praha, 2001. p. 285 ( p.)ISBN: 80-85918-64- 1.
    Detail

  • 2000

    VLACH, R. Controled of cooling of synchronous motor. In Sborník konference Diagnostika a aktivní řízení 2000. Třešť: VUT Brno, 2000. p. 138- 143 ( p.)ISBN: 80-214-1665- 3.
    Detail

    VLACH, R. Výpočtové modelování oteplení asynchronního dynamometru. In Aplikovaná elektromechanika 2000. Liberec: 2000. p. 379 ( p.)ISBN: 80-7083-388- 2.
    Detail

*) Publications are generated once a 24 hours.