Publications

• 2020

  KUNZ, J.; BENEŠ, P. Versatile Chirp Sine Generator on Fix-point FPGA. Acta Polytechnica (on-line), 2020, vol. 1, no. 1, p. 462-468. ISSN: 1805-2363.
  Detail | WWW

  KREJČÍ, J.; BENEŠ, P. A COMPARISON OF TWO MODAL ANALYSIS METHODS: AN IMPACT HAMMER VERSUS LASER VIBROMETRY. Acta Polytechnica (on-line), 2020, vol. 60, no. 5, p. 420-427. ISSN: 1805-2363.
  Detail | WWW

• 2019

  FIALKA, J.; KREJČÍ, J.; BENEŠ, P.; HAVRÁNEK, Z. New Design of the Wideband High Sensitive Acoustic Emmision Sensors. Piezo 2019: Electroceramics for End Users X - Book of Abstracts. Fyzikální ústav AV ČR, v. v. i., 2019. p. 55-55.
  Detail

  KUNZ, J.; BENEŠ, P. CHIRP SINE GENERATION ON FIX-POINT FPGA. ERIN 2019. 1. Brno: 2019. p. 29-29. ISBN: 978-80-214-5733-1.
  Detail

  KREJČÍ, J.; BENEŠ, P. COMPARISON OF TWO METHODS OF MODAL ANALYSIS AND AGREEMENT WITH MODEL. ERIN 2019. 1. Brno: 2019. p. 23-23. ISBN: 978-80-214-5733-1.
  Detail

  JANÁKOVÁ, I.; ŠEDIVÁ, S.; BENEŠ, P. Transparent Layer Compensation at the Active Triangulation Systems. In 16th IFAC Conference on Programmable Devices and Embedded Systems PDeS 2019. IFAC-PapersOnLine (ELSEVIER). IFAC, 2019. p. 508-513. ISSN: 2405-8963.
  Detail | WWW | Full text in the Digital Library

• 2018

  ČALA, M.; BENEŠ, P. A Method for Estimation of Motor Rotational Speed from STFT Spectrogram at a Non-stationary Conditions. In IFAC-PapersOnline. IFAC-PapersOnLine (ELSEVIER). Ostrava: 2018. p. 283-288. ISSN: 2405-8963.
  Detail

  KLUSÁČEK, S.; HAVRÁNEK, Z.; FIALKA, J.; BENEŠ, P. Comparing digital output MEMS microphones in the high frequency range. In Proceedings of the 25th International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. Hirosima, Japan: International Institute of Acoustic and Vibration, 2018. p. 1-6. ISBN: 978-83-7880-552-6. ISSN: 2329-3675.
  Detail

  BENEŠ, P.; KLUSÁČEK, S.; MÁLEK, P.; JÍLEK, T. CALIBRATION METHOD BASED ON NUMERICAL MODEL FOR THE MEMS 3D ACCELEROMETER. In Proceedings of the 25th International Congress on Sound and Vibration. Hiroshima: 2018. p. 150-155. ISBN: 978-83-7880-552-6.
  Detail | WWW

  BENEŠ, P.; VESELÝ, I. Testovací systém. 2018. p. 1 (1 s.).
  Detail

  KUNZ, J.; FIALKA, J.; BENEŠ, P.; HAVRÁNEK Z. An Automated measurement system for measuring an overall power efficiency and a characterisation of piezo harvesters. In Congress Proceedings as Institute of Physics. Journal of Physics: Conference Series. Belfast: IOP Publishing, 2018. p. 1-4. ISSN: 1742-6596.
  Detail | WWW | Full text in the Digital Library

  FIALKA, J.; BENEŠ, P.; HAVRÁNEK, Z. Comparison of Methods for Measurement of Curie Temperature. Structural and ferroelectric phase transitions: Book of abstracts - XXIII Czech - Polish seminar. Printed in the Czech Republic (Powerprint s.r.o., Prague): Fyzikální ústav AV ČR, v. v. i., 2018. p. 84-84. ISBN: 978-80-905962-7-6.
  Detail

  DOSEDĚL, M.; KREJČÍ, J.; BENEŠ, P.; HAVRÁNEK, Z. UTILIZATION OF MEMS ACCELEROMETERS IN VIBRODIAGNOSTICS. In Proceedings of the 25th International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. Hiroshima: 2018. p. 1-7. ISBN: 978-83-7880-552-6. ISSN: 2329-3675.
  Detail

  KUNZ, J.; ČALA, M.; PIKULA, S.; BENEŠ, P. Tracking Filter Design for Predictive Maintenance of Jet Engine - Different Approaches and Their Comparison. Strojnícky časopis, 2018, vol. 68, no. 4, p. 75-84. ISSN: 0039-2472.
  Detail | WWW

• 2017

  KUNZ, J.; BENEŠ, P. Mechanical Shock Shape Calculation from Estimated Accelerometer Parameters. In Proceedings of the 24th International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. London: 2017. p. 1-6. ISBN: 978-1-906913-27-4. ISSN: 2329-3675.
  Detail

  BENEŠ, P.; UHER, M. Vývojové zkoušky vibracemi a teplotou. 2017. p. 1 (1 s.).
  Detail

• 2016

  ČALA, M.; BENEŠ, P. Implementation of the Vold-Kalman Order Tracking Filters for Online Analysis. In Proceedings of the 23rd International Congress on Sound and Vibration. Athény: 2016. p. 1-8. ISBN: 978-960-99226-2-3.
  Detail | WWW

  FIALKA, J.; BENEŠ, P.; MICHLOVSKÁ, L.; KLUSÁČEK, S.; PIKULA, S.; DOHNAL, P.; HAVRÁNEK, Z. Measurement of thermal depolarization effects in piezoelectric coefficients of soft PZT ceramics via the frequency and direct methods. Journal of the European Ceramic Society, 2016, vol. 36, no. 11, p. 2727-2738. ISSN: 0955-2219.
  Detail | WWW

  PIKULA, S.; BENEŠ, P. Comparison of Measures of Time-Frequency Distribution Optimization. In 8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops - ICUMT. Lisabon: 2016. p. 314-319. ISBN: 978-1-4673-8817-7.
  Detail | WWW

  ČALA, M.; BENEŠ, P. Turbojet Vibrations Analysis Using the Order Tracking Methods. In Proceedings of 8th International Congress on Ultra Modern Telecommunications & Control Systems. Lisabon: 2016. p. 225-230. ISBN: 978-1-4673-8817-7.
  Detail | WWW

  KLUSÁČEK, S.; HAVRÁNEK, Z.; BENEŠ, P. Srovnání metod pro přesné určení rezonančních frekvencí lopatek turbodmychadla pomocí laserových interferometrů a kalibrace snímačů zrychlení a úhlové rychlosti na FEKT VUT v Brně. In Noise and vibration in practice. 21. Bratislava: Slovenská technická univerzita v Bratislavě, 2016. p. 83-88. ISBN: 978-80-227-4563- 5.
  Detail

• 2015

  HAVRÁNEK, Z.; BENEŠ, P.; KLUSÁČEK, S. Application of MEMS microphone array for acoustic holography. In Proceedings of Euronoise 2015. Proceedings - European Conference on Noise Control. Maastricht, Belgie: European Acoustics Association, 2015. p. 919-924. ISSN: 2226-5147.
  Detail

  VÁGNER, M.; BENEŠ, P. Start-up Response Improvement for a MEMS Inclinometer. In IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2015. 2015. p. 1363-1366. ISBN: 978-1-4799-6113-9.
  Detail

  KLUSÁČEK, S.; FIALKA, J.; HAVRÁNEK, Z.; BENEŠ, P. An Analysis of the Parameters of the Active PZT Element of a Knock Sensor. In INTER- NOISE 2015 Proceedings on USB. Proceedings - National Conference on Noise Control Engineering. San Francisco, USA: Institute of Noise Control Engineering, 2015. p. 1-7. ISSN: 0736- 2935.
  Detail | WWW

  HAVRÁNEK, Z.; FIALKA, J.; BENEŠ, P.; KLUSÁČEK, S. Numerical and experimental determination of impedance characteristics of PZT elements for acoustic emission sensors. In Proceedings of the 22nd International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. Florencie, Itálie: International Institute of Acoustic and Vibration, 2015. p. 1-8. ISBN: 978-88-88942-48- 3. ISSN: 2329- 3675.
  Detail

  KLUSÁČEK, S.; HAVRÁNEK, Z.; HASÍK, S.; FIALKA, J.; BENEŠ, P. Temperature and Sensitivity Analysis on MEMS Vibration Sensors with Different Principles of Operation. In Proceedings of the 22nd International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. Florencie, Itálie: International Institute of Acoustic and Vibration, 2015. p. 1-8. ISBN: 978-88-88942-48- 3. ISSN: 2329- 3675.
  Detail | WWW

• 2014

  KLUSÁČEK, S.; FIALKA, J.; HAVRÁNEK, Z.; BENEŠ, P. An Experimental Comparison of Laser Interferometer Methods for Accurate Determination of Resonant Frequencies in a Turbine Wheel Assembly. In Proceedings of the 21st International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. Peking: International Institute of Acoustic and Vibration, 2014. p. 1-8. ISBN: 978-83-62652-66-2. ISSN: 2329-3675.
  Detail

  BENEŠ, P.; FIALKA, J.; PIKULA, S. Design, description and calibration of the wideband acoustic emission sensors. In Proceedings of the 11th European Conference on Non- Destructive Testing. 2014. p. 1-7. ISBN: 978-80-214-5018- 9.
  Detail

  HAVRÁNEK, Z.; BENEŠ, P.; KLUSÁČEK, S. Free- field calibration of MEMS microphone array used for acoustic holography. In Proceedings of the 21st International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. Peking, Čína: 2014. p. 1-8. ISBN: 978-83-62652-66- 2. ISSN: 2329-3675.
  Detail

  KLUSÁČEK, S.; FIALKA, J.; BENEŠ, P.; HAVRÁNEK, Z.; PIKULA, S. Measurement of Temperature Dependence in the Piezoelectric Active Element of a Knock Sensor. In Proceedings of 43rd International Congress on Noise Control Engineering. Melbourne, Victoria, Austrálie: The Australian Acoustical Society, 2014. p. 1-7. ISBN: 978-0-909882-04- 4.
  Detail

  HAVRÁNEK, Z.; BENEŠ, P.; KLUSÁČEK, S. Comparison of patch acoustic holography methods for confined space. In Proceedings of 43rd International Congress on Noise Control Engineering. Melbourne, Victoria, Austrálie: The Australian Acoustical Society, 2014. p. 1-10. ISBN: 978-0-909882-04- 4.
  Detail

  PIKULA, S.; BENEŠ, P. A New Method for Interference Reduction in the Smoothed Pseudo Wigner- Ville Distribution. International Journal on Smart Sensing and Intelligent Systems, 2014, vol. 2014, no. 1, p. 599-603. ISSN: 1178- 5608.
  Detail

• 2013

  KLUSÁČEK, S.; FIALKA, J.; BENEŠ, P.; HAVRÁNEK, Z. An Experimental Study of Temperature Effect on Material Parameters of PZT Ceramic Ring Used in Knock Sensors. In Proceedings of the 2013 Seventh International Conference on Sensing Technology. 1. Wellington, New Zealand: Massey University, 2013. p. 874-879. ISBN: 978-1-4673-5221-5.
  Detail

  KLUSÁČEK, S.; FIALKA, J.; HAVRÁNEK, Z.; BENEŠ, P. Experimental methods for testing active element of piezoelectric knock sensor by using temperature dependences. In Proceedings of the 20th International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. USA: International Institute of Acoustic and Vibration, 2013. p. 1-7. ISBN: 978-616-551-682- 2. ISSN: 2329- 3675.
  Detail

  FIALKA, J.; BENEŠ, P.; PIKULA, S.; KLUSÁČEK, S. Measurement of Temperature Dependence in Material Coefficients of PZT Ceramics for Acoustic Emission Sensors. In 2013 IUS Proceedings. 1. IEEE Ultrasonics, Ferroelectrics, Frequency Control Society and European Frequency and Time Forum, 2013. p. 1109-1112. ISBN: 978-1-4673-5686-2.
  Detail

  FIALKA, J.; BENEŠ, P. Comparison of Methods for the Measurement of Piezoelectric Coefficients. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2013, vol. 62, no. 5, p. 1047-1057. ISSN: 0018-9456.
  Detail

  HAVRÁNEK, Z.; BENEŠ, P. Analysis of operational deflection shapes of the shaker armature near upper frequency limit. In Proceedings of the 20th International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. USA: International Institute of Acoustic and Vibration, 2013. p. 1-8. ISBN: 978-616-551-682- 2. ISSN: 2329- 3675.
  Detail

  VÁGNER, M.; BENEŠ, P. Scale Factor in MEMS Gyroscopes - The Effect of Power Supply Voltage. In Proceedings of the 2013 Seventh International Conference on Sensing Technology. Wellington, Nový Zéland: Massey University, 2013. p. 247-251. ISBN: 978-1-4673-5221- 5.
  Detail

• 2012

  FIALKA, J.; BENEŠ, P. Comparison of Methods of Piezoelectric Coefficient Measurement. In 2012 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2012) Proceedings. 1. 445 Hoes Lane, Piscataway, NJ 08855- 1331 USA: IEEE Service Center, 2012. p. 37-42. ISBN: 978-1-4577-1771- 0.
  Detail

  VÁGNER, M.; BENEŠ, P.; HAVRÁNEK, Z. Experience With Allan Variance Method for MEMS Gyroscope Performance Characterization. In 2012 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2012) Proceedings. 1. 445 Hoes Lane, Piscataway, NJ 08855- 1331 USA: IEEE Service Center, 2012. p. 1343-1347. ISBN: 978-1-4577-1771- 0.
  Detail

  FIALKA, J.; BENEŠ, P. Measurement of Piezoelectric Ceramic Parameters - A Characterization of the Elastic, Dielectric and Piezoelectric Properties of NCE51 PZT. In 2012 13th International Carpathian Control Conference (ICCC). 1. Faculty of BERG, Technical Universtity of Košice, B. Němcovej 3, 042 00 Košice, Slovak Republic: ICCC 2012, Institute of Control and Informatization of Production Processes, 2012. p. 147-152. ISBN: 978-1-4577-1866- 3.
  Detail

  KLUSÁČEK, S.; HAVRÁNEK, Z.; BENEŠ, P. Primární a sekundární kalibrace snímačů vibrací na FEKT VUT v Brně. In Sborník příspěvků Setkání uživatelů PULSE 2012. Praha: Spectris Praha spol. s r.o., 2012. p. 1-6. ISBN: 978-80-904648-2- 7.
  Detail

  UHER, M.; BENEŠ, P. Measurement of Particle Size Distribution by the Use of Acoustic Emission Method. In 2012 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2012) Proceedings. 1. 445 Hoes Lane, Piscataway, NJ 08855- 1331 USA: IEEE Service Center, 2012. p. 1194-1198. ISBN: 978-1-4577-1771- 0.
  Detail

  VÁGNER, M.; BENEŠ, P. Power supply sensitivity of MEMS gyroscopes. In Proceedings of XX IMEKO World Congress. Korea: 2012. p. 923- 1 (923-4 p.)ISBN: 978-89-950000-5- 2.
  Detail

  BENEŠ, P.; FIALKA, J. Comparison of methods for absolute calibration of broadband AE sensors. In Proceedings 30th European Conference on Acoustic Emission Testing and 7th International Conference on Acoustic Emission. 1. 18071 Granada, Spain: University of Granada, 2012. p. 113- 1 (113-9 p.)ISBN: 978-84-615-9941- 7.
  Detail

  UHER, M.; BENEŠ, P. Measurement of Particle Size Distribution by Acoustic Emission Method. In Proceedings of XX IMEKO(International Measurement Confederation) World Congress. Busan, Korejská republika: 2012. p. TC9-P4- 1 (TC9-P4-5 p.)ISBN: 978-89-950000-5- 2.
  Detail

• 2011

  HAVRÁNEK, Z.; KLUSÁČEK, S.; BENEŠ, P.; VÁGNER, M. Allan variance analysis on MEMS tilt sensors with different principles of operation. In 2011 IEEE SENSORS Proceedings. Limerick, Ireland: IEEE, 2011. p. 1685-1688. ISBN: 978-1-4244-9288-6.
  Detail

• 2010

  HAVRÁNEK, Z.; BENEŠ, P. Zajímavé aplikace a projekty řešené na ÚAMT. In Novinky, zajímavosti a kuriozity z oblasti výuky, vědy a výzkumu. Sborník příspěvků ze "Setkání kateder kybernetiky, měřicí a řídicí techniky a automatizace z Čech, Moravy, Slezska a Slovenska 2010". Praha: ČVUT v Praze, 2010. p. 73-79.
  Detail

  BENEŠ, P.; FIALKA, J. Hlavní problémy při kalibraci snímačů AE. In NDT for Safety / Defektoskopie 2010. listopad 2010. Technická 2 , 616 69 , Brno CZ: Brno University of Technology, Faculty of Mechanical Engineering, 2010. p. 17-24. ISBN: 978-80-214-4182- 8.
  Detail

• 2009

  KEPRT, J.; BENEŠ, P. The determination of uncertainty in the calibration of acoustic emission sensors. International Journal of Microstructure and Materials Properties, 2009, vol. 4, no. 1, p. 85-103. ISSN: 1741- 8410.
  Detail

• 2008

  KEPRT, J.; BENEŠ, P. A Comparison of AE Sensor Calibration Methods. Journal of Acoustic Emission, 2008, vol. 2008, no. 26, p. 60-71. ISSN: 0730- 0050.
  Detail

• 2007

  KEPRT, J.; BENEŠ, P. Determination of Uncertainty in Calibration of Acoustic Emission Sensors. In 4th International Conference On Non- descructive testing. Athens: Hellenic Society of NDT, 2007. p. 105-110.
  Detail

  FIDLER, P.; BENEŠ, P. EMAT snímač akustické emise. In Defektoskopie 2007 - sborník příspěvků. Praha: VUT Brno, 2007. p. 20 ( p.)ISBN: 978-80-214-3504- 9.
  Detail

  KEPRT, J.; BENEŠ, P. Stanovení nejistot primární kalibrace snímačů akustické emise. In Defektoskopie 2007 Sborník příspěvků. Praha: Česká společnost pro nedestruktivní testování, 2007. p. 105-110. ISBN: 978-80-214-3504- 9.
  Detail

• 2006

  KEPRT, J. - BENEŠ, P. Kalibrace snímačů AE. In Defektoskopie 2006 - Sborník příspěvků. Tábor: VUT Brno, 2006. p. 101 ( p.)ISBN: 80-214-3290- X.
  Detail

  BENEŠ, P.; KLUSÁČEK, S. ONLINE MEASUREMENT OF THE PARTICLE SIZE DISTRIBUTION. In Proceedings of IMEKO XVII World Congress. Rio de Janeiro: International Measurement Confederation - IMEKO, 2006. p. 1-6.
  Detail

  Stanislav Klusacek, Petr Benes. Measurement of Irregularity of Particle Size Distribution. In Modern trends in Control. Košice: Equilibria, s.r.o., 2006. p. 151-161. ISBN: 80-969224-6- 7.
  Detail

• 2005

  BENEŠ, P., MALEC, Z. Some experiences with automatic quality measuring of precision gearboxes. In TEST 2005. Norimberk: AMA, 2005. p. 12 ( p.)
  Detail

  ŠVÉDA, M., BENEŠ, P., VRBA, R., ZEZULKA, F. Chybí název. editors: M. Ilyas, I. Mahgoub. editors: M. Ilyas, I. Mahgoub. London: CRC Press, 2005. 25 p. ISBN: 0-8493-1968- 4.
  Detail | WWW

  ŠVÉDA, M., BENEŠ, P., VRBA, R., ZEZULKA, F. Introduction to Industrial Sensor Networking. In Handbook of Sensor Networks: Compact Wireless and Wired Sensing Systems. Boca Raton, Florida: CRC Press LLC, 2005. p. 10-24. ISBN: 0-8493-1968- 4.
  Detail

• 2004

  BENEŠ, P.; KLUSÁČEK, S. In Process Measurement of Particle Size Distribution. In Proceedings of IEEE Sensors 2004. Vienna: IEEE Computer Society, 2004. p. 357-361. ISBN: 0-7803-8693- 0.
  Detail

  BENEŠ, P.; HAVRÁNEK, Z.; KOPECKÝ, T., KRUPA, M. Měření fyzikálních veličin (návody do laboratorních cvičení). Brno: FEKT VUT v Brně, 2004. p. 1 ( p.)
  Detail | WWW

  BENEŠ, P., BEYER, T. Standard IEEE 1451 – budoucnost inteligentních snímačů?. Automa, 2004, vol. 10, no. 7, p. 7 ( p.)ISSN: 1210- 9592.
  Detail

• 2003

  BENEŠ, P., MAZAL, P., PAZDERA, L. Practical tests of acoustic emission method at Brno University of Technology. 2003, vol. 19, no. 1, p. 20 ( p.)
  Detail

  MALEC, Z., BENEŠ, P. An Automatic System for Measuring of Properties of Precision Gearbox. In Proceedings XVII IMEKO World Congres. Dubrovnik, Croatia: HMD, 2003. p. 1502 ( p.)ISBN: 953-7124-00- 2.
  Detail

  MALEC, Z., BENEŠ, P. Experimental stand for quality measurement of precision gearings. In TEST 2003. Nuremberg: AMA Service, 2003. p. 213 ( p.)
  Detail

• 2002

  BENEŠ, P. Process analysis on heat transfer surface. In EWGAE 2002. Praha: ČNDT, 2002. p. 51 ( p.)ISBN: 80-214-2174- 6.
  Detail

  BENEŠ, P. Particle Velocity Flowmeters. In Eurosensors XVI. Praha: Czech Technical University, 2002. p. 673 ( p.)ISBN: 80-01-02576- 4.
  Detail

  MALEC, Z., BENEŠ, P. Meassuremnent of Errors of precision gearboxes and couplings. In Proceedings of DAAAM 2002. Vienna: Danube Adria Association for Automation and Manufacturing, 2002. p. 331 ( p.)ISBN: 3-901509-29- 1.
  Detail

  MAZAL, P., BENEŠ, P., PAZDERA, L. Rozvoj metody akustické emise na VUT v Brně. In Defektoskopie 2002. Brno: ČNDT, 2002. p. 131 ( p.)ISBN: 80-214-2247- 5.
  Detail

  BENEŠ, P. "Plug and Play" snímače - standard IEEE 1451. In Teorie a praxe automatizace 2002. Brno: 2002. p. 23 ( p.)
  Detail

  MAZAL, P., BENEŠ, P., PAZDERA, L. Acoustic Emission Laboratories at Brno University of Technology. In EWGAE 2002. Brno: Czech Society for Non- destructive Testing, 2002. p. 27 ( p.)ISBN: 80-214-2174- 6.
  Detail

  BEJČEK, L., BENEŠ, P. Měření průtoku dvoufázových médií. GAČR 102/99/ 1644. Brno: GAČR, 2002.
  Detail

• 2001

  BENEŠ, P. Boiling State Measurement. In Acoustic Emission 2001. Brno: BUT, 2001. p. 5 ( p.)ISBN: 80-214-2008- 1.
  Detail

  ŠVÉDA, M., VRBA, R., BENEŠ, P. A System Architecture of Networked Pressure Sensors. In Proceedings of the 5th WSES/IEEE World Conference on Systems (CSCC2001). Rethymno: IEEE Computer Society Press, 2001. p. 3541-3546. ISBN: 960-8052-33- 5.
  Detail | WWW

  MATĚJKA, F., MATĚJKOVÁ, J., VRBA, R., BENEŠ, P. Means of Pressure Analysis using Nitride Silicon Diaphragm. In Mastorakis, N. – Pecorelli-Peres, I. A. (editors): Advances in Systems Science: Measurement, Circuits and Control. Electrical and Computer Engineering Series – A Series of Reference Books and Textbooks, Brazil, WSES Press 2001. Brazil: WSES Press, 2001. p. 70 ( p.)ISBN: 960-8052-39- 4.
  Detail

  BENEŠ, P. Boiling State Measurement. In Tepmeko 2001. Berlin: PTB - VDI/ VDE GMA, 2001. p. 322 ( p.)
  Detail

  BENEŠ, P., MATĚJKA, F., VRBA, R., KOLAŘÍK, V. Pressure Sensor with Si3N4 Diaphragm and Optoelectronic Sensing. In TEMI 2001 trends in electrical Measurement and Instrumentation. Lisbon, Portugal: Instituto de Telecomunicacoes, 2001. p. 327 ( p.)ISBN: 972-98115-4- 7.
  Detail

  BENEŠ, P., ČULEN, J. Korelační průtokoměr s využitím snímačů akustické emise. In Průtok 2001. Praha: TECH- MARKET, 2001. p. 166 ( p.)ISBN: 80-86114-41- 4.
  Detail

  BENEŠ, P., CHMELAŘ, P. Metody kalibrace snímačů AE. In defektoskopie 2001. Praha: ČNDT, 2001. p. 37 ( p.)ISBN: 80-214-2002- 2.
  Detail

  BENEŠ, P., MATĚJKA, F., VRBA, R., KOLAŘÍK, V. Optoelectronic pressure sensor with Si3N4 diaphragm. In 16th International Conference on Production Research. Praha: Czech Association of Scientific and Technical Societies, 2001. p. 132 ( p.)ISBN: 80-02-01438- 3.
  Detail

  ŠVÉDA, M., VRBA, R., BENEŠ, P. A System Architecture of Networked Pressure Sensors. In Advances in Systems Science: Measurement, Circuits and Control. Electrical and Computer Engineering Series -- A Series of Reference Books and Textbooks. Herakleion, Greece: IEEE Computer Society Press, 2001. p. 64-69. ISBN: 960-8052-39- 4.
  Detail

  VRBA, R., ŠVÉDA, M., BENEŠ, P. Pressure Analyser Networking with Low-Level Fieldbus Interconnected to Intranet/ Internet by Ethernet. In 11th IMEKO TC- 4 Symposium Trends in Electrical Measurement and Instrumentation. Lisabon, Portugalsko: Instituto de Telecomunicacoes, 2001. p. 454 ( p.)ISBN: 972-98115-4- 7.
  Detail

  BENEŠ, P., BENDA, K., DANIEL, J., KOLAŘÍK, V., MATĚJKA, F., VRBA, R. Čidlo pro tlakový analyzátor, návrh snímacího systému a návaznosti na nadřazený systém. výzkumná zpráva. Brno: ÚMEL, 2001.
  Detail

  MALEC, Z., BENEŠ, P. An automatic system for measuring of properties of precision gearboxes. In Proceedings of MAT 2001. Wunstorf, Germany: AMA Service, GmbH, 2001. p. 297 ( p.)
  Detail

  MALEC, Z., BENEŠ, P. Experimental stand for quality measurements of precision gearings. In Measurement 2001. Bratislava, SR: Institute of measurement science SAV, 2001. p. 212 ( p.)ISBN: 80-967402-5- 3.
  Detail

  VEČEŘA, I., BENEŠ, P., MATĚJKA, F., VRBA, R. Comb positional microsensor. In Proceedings of Socrates Workshop 2001 Intensive Training Programme in Electronic System Design. .: VUT, 2001. p. 329 ( p.)ISBN: 80-214-2027- 8.
  Detail

• 2000

  BENEŠ, P.; ZEHNULA, K. New design of the two- phase flowmeters. Sensors and Actuators, 2000, vol. 2000, no. 86, p. 220-225. ISSN: 0924- 4247.
  Detail

*) Publications are generated once a 24 hours.