Publications

• 2023

  POHANKA, M.; VOTAVOVÁ, H.; RESL, O.; KOTRBÁČEK, P. The Effect of Water Jet Overlaps in a Descaler on the Quality of Surface of the Hot Rolled Steel. Metals, 2023, vol. 13, no. 10, p. 1-13. ISSN: 2075-4701.
  Detail | WWW | Full text in the Digital Library

• 2022

  ZELEŇÁK, M.; ŘÍHA, Z.; VOTAVOVÁ, H.; FOLDYNA, J.; SITEK, L.; ŠČUČKA, J.; POHANKA, M. Methods for the behaviour analysis of continuous flat water jet structures. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2022, vol. 2022, no. 202, p. 111886-111886. ISSN: 0263-2241.
  Detail | WWW

  BELLEROVÁ, H.; POHANKA, M.; RESL, O. HEAT LOSSES OF BLOOM IN THE HOT ROLLING PROCESS. In Sborník z konference Metal 2022. 2022. p. 182-186. ISBN: 978-80-88365-06-8.
  Detail | WWW

  KOTRBÁČEK, P.; POHANKA, M.; CHABIČOVSKÝ, M. Energeticky úsporné systémy pro chlazení horkých povrchů, tepelné zpracování a hydraulické odstranění okují. Hutnické listy, 2022, vol. 75, no. 3-4, p. 4-8. ISSN: 0018-8069.
  Detail | WWW

  KOTRBÁČEK, P.; POHANKA, M.; CHABIČOVSKÝ, M. Design of cooling sections for heat treatment based on laboratory measurements of heat transfer coefficient. In Článek ve sborníku. 2022. p. 144-150. ISBN: 9783200085848.
  Detail | WWW

  POHANKA, M.; RESL, O. NOZZLE ORIENTATION EFFECT ON THERMAL CROWN AND STRESS IN THE WORK ROLL. 2022. p. 1-5.
  Detail

• 2021

  RESL, O.; POHANKA, M. Influence of the remaining water layer on the cooling of moving steel surfaces. In Metal. 28th International Conference on Metallurgy and Materials. Tanger, 2021. p. 288-293. ISBN: 978-80-87294-99-4. ISSN: 2694-9296.
  Detail | WWW | Full text in the Digital Library

  KOMÍNEK, J.; LUKS, T.; POHANKA, M.; HWANG, J. Y. Influence of Segmented Rolls on Homogeneity of Cooling in Continuous Casting. Metals, 2021, vol. 11, no. 8, p. 1-11. ISSN: 2075-4701.
  Detail | WWW | Full text in the Digital Library

• 2020

  POHANKA, M. DeNoRoll. 2020.
  Detail

  POHANKA, M.; KOTRBÁČEK, P.; RESL, O.; BELLEROVÁ, H. OPTIMAL HYDRAULIC DESCALING. In Metal 2020. 2020. p. 118-125. ISBN: 978-80-87294-97-0.
  Detail | WWW

  POHANKA, M.; KOTRBÁČEK, P.; BARTULI, E.; RAUDENSKÝ, M. ENERGY-EFFICIENT COOLING AND HYDRAULIC DESCALING SYSTEMS. METALLURGIST, 2020, vol. 64, no. 7-8, p. 729-740. ISSN: 0026-0894.
  Detail | WWW

• 2019

  POHANKA, M.; KOTRBÁČEK, P.; BARTULI, E.; RAUDENSKÝ, M. ЭНЕРГОЭФФЕКТИВНЫЕ СИСТЕМЫ ОХЛАЖДЕНИЯ И ГИДРАВЛИЧЕСКОГО УДАЛЕНИЯ ОКАЛИНЫ. METALLURGIST, 2019, vol. 1, no. 8, p. 6-13. ISSN: 0026-0894.
  Detail | WWW

  KOTRBÁČEK, P.; POHANKA, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Study of the heat transfer distribution during the plate heat treatment. Dusseldorf: 2019. p. 1-5.
  Detail

  POHANKA, M. ReduHeatLoss - Reduction of heat losses in hot rolling. 2019.
  Detail

  POHANKA, M. HiPerScale II. 2019.
  Detail

  KOTRBÁČEK, P.; POHANKA, M.; ZACHAR, M. Energeticky úsporné systémy pro chlazení horkých povrchů a hydraulické odstranění okují. Hutnické listy, 2019, vol. 72, no. 4, p. 15-22. ISSN: 0018-8069.
  Detail | WWW

  RESL, O.; POHANKA, M. THE EFFECT OF REMAINING WATER LAYER ON FINAL TEMPERATURE OF STEEL PLATE DURING HOT ROLLING. In METAL 2019 Conference Proceedings. Ostrava: Tanger, Ostrava, 2019. p. 355-360. ISBN: 978-80-87294-92-5.
  Detail

  KOTRBÁČEK, P.; POHANKA, M.; ZACHAR, M. Optimization of Work Roll Cooling in Rolling. Dusseldorf: 2019. p. 1-6.
  Detail

• 2018

  POHANKA, M.; VOTAVOVÁ, H.; RAUDENSKÝ, M.; HWANG, J. Y.; YOU, J. W.; LEE, S. H. THE EFFECT OF WATER TEMPERATURE ON COOLING DURING HIGH PRESSURE WATER DESCALING. Thermal Science, 2018, vol. 6, no. 22, p. 2965-2971. ISSN: 0354-9836.
  Detail | WWW

  KOMÍNEK, J.; LUKS, T.; POHANKA, M.; RAUDENSKÝ, M.; HWANG, J-Y. SECONDARY COOLING OVERLAPPED WITH BEARING HOUSING IN A CONTINUOUS CASTER. In Sborník konference METAL 2018. Ostrava: Tanger, Ostrava, 2018. p. 1-6. ISBN: 978-80-87294-83-3.
  Detail

  RAUDENSKÝ, M.; POHANKA, M.; VOTAVOVÁ, H.; ŘÍHA, Z.; ZELEŇÁK, M. Latest development of hydraulic descaling nozzles. Chicago: 2018. p. 1-5.
  Detail

  VOTAVOVÁ, H.; POHANKA, M. THE COOLING PROCESS IN SPRAY OVERLAP DURING HYDRAULIC DESCALING. In Sborník konference METAL 2018. Ostrava: Tanger, Ostrava, 2018. p. 1-6. ISBN: 978-80-87294-83-3.
  Detail

  POHANKA, M.; HNÍZDIL, M.; KOTRBÁČEK, P.; VOTAVOVÁ, H. Hydraulic descaling of wire coils during pickling program. 2018. p. 45-48.
  Detail

• 2017

  VOTAVOVÁ, H.; POHANKA, M. EFFECT OF THE SPEED OF FEEDSTOCK ON HEAT TRANSFER COEFFICIENT DURING DESCALING IN HOT ROLLING. In Sborník konference METAL 2017. Ostrava: Tanger, Ostrava, 2017. p. 261-266. ISBN: 978-80-87294-73-4.
  Detail

• 2016

  POHANKA, M.; RAUDENSKÝ, M.; HWANG, J., Y.; YOU, J., W.; LEE, S. H.;. Mutual collision of water jets from adjacent high pressure flat jet nozzles on flat surfaces during hydraulic descaling. TEHNIČKI VJESNIK - TECHNICAL GAZETTE, 2016, vol. 23, no. 5, p. 1389-1394. ISSN: 1330-3651.
  Detail | WWW | Full text in the Digital Library

  KOMÍNEK, J.; POHANKA, M. Estimation of the Number of Forward Time Steps for the Sequential Beck Approach Used for Solving Inverse Heat Conduction Problems. Materiali in tehnologije, 2016, vol. 50, no. 2, p. 207-210. ISSN: 1580-2949.
  Detail | WWW

  POHANKA, M.; VOTAVOVÁ, H. Overcooling in overlap areas during hydraulic Descaling. Materiali in tehnologije, 2016, vol. 50, no. 4, p. 575-578. ISSN: 1580-2949.
  Detail

  POHANKA, M.; ONDROUŠKOVÁ, J. Implicit numerical multidimensional heat-conduction algorithm parallelization and acceleration on a graphics card. Materiali in tehnologije, 2016, vol. 50, no. 2, p. 183-187. ISSN: 1580-2949.
  Detail | WWW

  VOTAVOVÁ, H.; POHANKA, M. Study of Water Jet Collision of High Pressure Flat Jet Nozzles for Hydraulic Descaling. In Engineering Mechanics 2015. Applied Mechanics and Materials. Switzerland: Trans Tech Publications, 2016. p. 152-158. ISBN: 978-3-03835-700- 1. ISSN: 1660- 9336.
  Detail

  VOTAVOVÁ, H.; POHANKA, M. Effect of stabilizer length on the performance of high pressure descaling nozzles. In METAL 2016, 25rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: TANGER Ltd., 2016. p. 261-266. ISBN: 978-80-87294-67-3.
  Detail | WWW

  POHANKA, M.; CHABIČOVSKÝ, M.; ONDRUCH, T. Thermophysical properties measurement of scale layer on steel substrate using flash method. 24th INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, 2016. p. 175-175. ISBN: 978-961-94088-0- 3.
  Detail

  RAUDENSKÝ, M.; HORSKÝ, J.; HRABOVSKÝ, J.; KOTRBÁČEK, P.; POHANKA, M. Mechanical Properties of Oxidized Steel Samples by Small Punch Test. Hutnické listy, 2016, vol. 69, no. 2, p. 10-16. ISSN: 0018-8069.
  Detail

  HRABOVSKÝ, J.; POHANKA, M.; LEE,P.J.; KANG, J.H. Experimental and numerical study of hot-steel-plate flatness. Materiali in tehnologije, 2016, vol. 50, no. 1, p. 17-21. ISSN: 1580-2949.
  Detail | WWW

• 2015

  VOTAVOVÁ, H.; POHANKA, M. Study of Water Jets Collision of High Pressure Flat Jet Nozzles for Hydraulic Descaling. In ENGINEERING MECHANICS 2015, 21st International Conference Engineering Mechanics 2015. Engineering mechanics 2014. 1. Svratka: Institute of Theoretical and Applied Mechanics, 2015. p. 354-355. ISBN: 978-80-86246-42- 0. ISSN: 1805- 8248.
  Detail | WWW

  KVAPIL, J.; POHANKA, M.; HORSKÝ, J. Estimation of the Thermal Contact Conductance From Unsteady Temperature Measurements. Materiali in tehnologije, 2015, vol. 49, no. 2, p. 219-222. ISSN: 1580-2949.
  Detail | WWW

  VOTAVOVÁ, H.; POHANKA, M.; BULEJKO, P. Cooling homogeneity measurement during hydraulic descaling in spray overlapping area. In METAL 2015 24th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger Ltd Ostrava, 2015. p. 265-270. ISBN: 978-80-87294-58- 1.
  Detail

  KOMÍNEK, J.; HŘIBOVÁ, V.; POHANKA, M. Methodology of Evaluation of Heat Transfer Experiment on Aluminum sample. In METAL 2015 Full Texts of Papers. Ostrava: TANGER, 2015. p. 1-6. ISBN: 978-80-87294-58- 1.
  Detail

  KVAPIL, J.; HORSKÝ, J.; POHANKA, M. Stanovení tepelného odporu v kontaktu na základě nestacionárního teplotního měření. Hutnické listy, 2015, vol. LXVIII, no. 4, p. 15-19. ISSN: 0018- 8069.
  Detail

  VOTAVOVÁ, H.; POHANKA, M. Study of Overlapping Area of High Pressure Flat Water Jets Used for Hydraulic Descaling. In Ph.D. Workshop 2015 Proceedings. Ostrava: Ediční středisko VŠB - TU Ostrava, 2015. p. 24-24. ISBN: 978-80-86407-62- 3.
  Detail

  POHANKA, M.; VOTAVOVÁ, H. OVERCOOLING IN OVERLAPPING AREAS DURING HYDRAULIC DESCALING. In Book of abstracts. 23rd International Conference on Materials and Technology. Ljubljana: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, 2015. p. 199-199. ISBN: 978-961-92518-8- 1.
  Detail

  KOTRBÁČEK, P.; HORSKÝ, J.; LUKS, T.; POHANKA, M. NUMERICAL SIMULATION AND VERIFICATION OF ROLL, TEMPERATURE HISTORY DURING ROLLING CAMPAIGN. Roll5 2015. London, United Kingdom: IOM Communicatiins Ltd, 2015. p. 1-11.
  Detail

• 2014

  POHANKA, M.; RAUDENSKÝ, M.; HWANG, J.; YOU, J.; LEE, S. Water Temperature Effect on Cooling Intensity for high Pressure Descaling Nozzles. London, UK: IOM Communications Ltd, 2014. p. 71-74.
  Detail

  KOMÍNEK, J.; POHANKA, M. Estimation of the Number of Forward Time Steps for the Sequential Beck Approach Used for Solving Inverse Heat Conduction Problems. 22nd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, Ljubljana, Slovenija, 2014. p. 122-122. ISBN: 978-961-92518-7- 4.
  Detail | WWW

  TSENG, A.; BELLEROVÁ, H.; POHANKA, M.; RAUDENSKÝ, M. Effects of titania nanoparticles on heat transfer performance of spray cooling with full cone nozzle. Applied Thermal Engineering, 2014, vol. 62, no. 1, p. 20-27. ISSN: 1359- 4311.
  Detail | WWW

• 2013

  POHANKA, M.; RAUDENSKÝ, M.; HWANG, J.; YOU, J.; LEE, S. Water jet interaction from adjacent high pressure descaling nozzles. In Vodní paprsek 2013. Ostrava: Ústav geoniky AV ČR, 2013. p. 179-187. ISBN: 978-80-86407-43- 2.
  Detail

  KOMÍNEK, J.; POHANKA, M.; ONDROUŠKOVÁ, J. Determination of Temperature Dependent Cooling Intensity for the Simulation of In- line Heat Treatment. In Conference proceedings of 22nd Conference on metallurgy and materials. 1. 2013. p. 34-40. ISBN: 978-80-87294-41- 3.
  Detail | WWW

  ONDROUŠKOVÁ, J.; KOMÍNEK, J.; POHANKA, M. Computing Cooling Intensity from Descaling Experiments. In Steelsim 2013. 2013. p. 19-19. ISBN: 978-80-260-3912- 9.
  Detail

  HORSKÝ, J.; LUKS, T.; POHANKA, M.; KVAPIL, J. Thermal and friction sensors for roll-gap - development. 2013. p. 1-30.
  Detail

  KVAPIL, J.; POHANKA, M.; HORSKÝ, J. Estimation of Thermal Contact Conductance from unsteady temperature measurements. In Steelsim 2013. Ostrava: VŠB - Technical university of Ostrava, 2013. p. 27-33. ISBN: 978-80-260-3912- 9.
  Detail | WWW

  ONDROUŠKOVÁ, J.; POHANKA, M.; VERVAET, B. HEAT-FLUX COMPUTATION FROM MEASURED- TEMPERATURE HISTORIES DURING HOT ROLLING. Materiali in tehnologije, 2013, vol. 47, no. 1, p. 85-87. ISSN: 1580-2949.
  Detail | WWW

• 2012

  KVAPIL, J.; HRABOVSKÝ, J.; POHANKA, M. Water chamber geometry and stabilizer construction effect on water pressure distribution of high pressure descaling nozzles. EPJ Web of Conferences, 2012, vol. 25, no. 4, p. 01076-p.1 (01076-p.11 p.)ISSN: 2100-014X.
  Detail | WWW | Full text in the Digital Library

  BELLEROVÁ, H.; TSENG, A.; POHANKA, M.; RAUDENSKÝ, M. Heat transfer of spray cooling using alumina/ water nanofluids with full cone nozzles. HEAT AND MASS TRANSFER, 2012, vol. 48, no. 11, p. 1971-1983. ISSN: 0947- 7411.
  Detail | WWW

  BELLEROVÁ, H.; TSENG, A.; POHANKA, M.; RAUDENSKÝ, M. Spray cooling by solid jet nozzles using alumina/ water nanofluids. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2012, vol. 62, no. 12, p. 127-137. ISSN: 1290- 0729.
  Detail | WWW

  POHANKA, M.; KOTRBÁČEK, P. Design of cooling units for heat treatment. In Heat treatment conventional and applications. In Tech. Rijeka, Croatia: InTech, 2012. p. 1-20. ISBN: 978-953-51-0768- 2.
  Detail | WWW

• 2011

  KVAPIL, J.; HRABOVSKÝ, J.; POHANKA, M. Water chamber geometry and stabilizer construction effect on water pressure distribution of high pressure descaling nozzles. In Experimental Fluid Mechanics 2011. Proceedings of the International conference. Jičín: 2011. p. 394-404. ISBN: 978-80-7372-784- 0.
  Detail

  BELLEROVÁ, H.; POHANKA, M. Spray cooling by multi- walled carbon nanotubes and Fe nanoparticles. In Computtaional Methods And Experimental Measurements XV. UK: Witt Press, 2011. p. 293-304. ISBN: 978-1-84564-540- 3.
  Detail

  RAUDENSKÝ, M.; POHANKA, M.; HNÍZDIL, M.; MARMONIER, F. COOLING SYSTEMS FOR CONTINOUS GALVANIZING LINE. In 20th Anniversary International Conference on Metallurgy and Materials - Metal 2011 - Conference Proceedings - Papers. 1. Brno: Tanger Ltd, 2011. p. 779-785. ISBN: 978-80-87294-24- 6.
  Detail

  ONDROUŠKOVÁ, J.; POHANKA, M. Nonhomogeneous cooling effect on metallurgical structure of material. In Power System Engineering, Thermodynamics & Fluid Flow. 2011. p. 10-16. ISBN: 978-80-261-0004- 1.
  Detail

  ZAHRADNÍK, R.; BOHÁČEK, J.; RAUDENSKÝ, M.; KOTRBÁČEK, P.; POHANKA, M. Stanovení součinitele přestupu tepla pro vzduchové trysky. Brno: LPTaP, 2011. p. 1-75.
  Detail

  HORÁK, A.; RAUDENSKÝ, M.; POHANKA, M.; BELLEROVÁ, H.; REICHARDT, T. Research on cooling efficiences of water, emulsions and oil. Engineering Mechanics, 2011, vol. 18, no. 2, p. 81-89. ISSN: 1802-1484.
  Detail

• 2010

  HORÁK, A.; RAUDENSKÝ, M.; POHANKA, M.; BELLEROVÁ, H.; REICHARDT, T. Research on Cooling Efficiences of Water, Emulsions and Oil. Metallurfical and Mining Industry, 2010, vol. 2, no. 4, p. 271-278. ISSN: 2076- 0507.
  Detail

  BELLEROVÁ, H.; POHANKA, M. Spray cooling by multi- walled carbon nanotubes and Fe nanoparticles. In Heat Transfer 2010. Wessex Institute of Technology, 2010. p. 1-9. ISBN: 978-1-84564-540- 3.
  Detail

  RAUDENSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; KOTRBÁČEK, P.; POHANKA, M. In- Line Heat Treatment and Hot Rolling. In International conference on advances in materials and processing technologies (AMPT2010). 1. 2010. p. 563-568. ISBN: 978-0-7354-0871- 5.
  Detail

  KVAPIL, J.; POHANKA, M. Water impact measurement of two overlapping high pressure flat jet nozzles using two different methods. In Engineering Mechanics 2010 - sborník. 2010. p. 89-90. ISBN: 978-80-87012-26- 0.
  Detail

  ONDROUŠKOVÁ, J.; POHANKA, M. Chladící účinky na pracovní válec ploché trysky versus kuželové trysky. In Engineering Mechanics 2010 - sborník. 2010. p. 135-136. ISBN: 978-80-87012-26- 0.
  Detail

  BELLEROVÁ, H.; POHANKA, M.; RAUDENSKÝ, M.; TSENG, A. Spray cooling by water based nanofluids with Al2O3 and TiO2. In 2010IEEE. 2010 IEEE. IEEE, 2010. p. 1-5. ISBN: 978-1-4244-5343- 6. ISSN: 1087- 9870.
  Detail | WWW

• 2009

  POHANKA, M.; BELLEROVÁ, H.; RAUDENSKÝ, M. Experimental Technique for Heat Transfer Measurements on Fast Moving Sprayed Surfaces. Journal of ASTM International, 2009, vol. 6, no. 4, p. 1-9. ISSN: 1546- 962X.
  Detail

  KOTRBÁČEK, P.; POHANKA, M.; HORSKÝ, J.; RAUDENSKÝ, M. Modelling of Cooling and Thermal Load of Rolls in Hot Rolling. In Proceeding 3rd SteelSim 2009. Leoben, Austria: ASMET, 2009. p. 1-8. ISBN: 9783200016330.
  Detail

• 2008

  HORSKÝ, J.; POHANKA, M.; RAUDENSKÝ, M.; KOTRBÁČEK, P.; BELLEROVÁ, H. Experiments for the investigation of heat transfer on hot plates. 2008.
  Detail

• 2007

  HORSKÝ, J.; RAUDENSKÝ, M.; KOTRBÁČEK, P.; POHANKA, M.; BOHÁČEK, J.; BELLEROVÁ, H. Improvement of cooling and related lubrication effects in cold rolling of carbon and stainless steel grades - roll. 2007. p. 1-10.
  Detail

  POHANKA, M.; HORSKÝ, J. Inverse algorithms for time dependent boundary reconstruction of multidimensional heat conduction model. In Thermophysics 2007. Bratislava: STU, 2007. p. 14-23. ISBN: 978-80-227-2746- 4.
  Detail

  RAUDENSKÝ, M.; HORSKÝ, J.; POHANKA, M.; KOTRBÁČEK, P. Optimalizace hydraulických systémů v procesu válcování - etapa E2 a E4. 2007. p. 1-17.
  Detail

  RAUDENSKÝ, M.; HORSKÝ, J.; KOTRBÁČEK, P.; POHANKA, M.; BOHÁČEK, J.; BELLEROVÁ, H. Effective Roll Cooling - final report. 2007. p. 1-14.
  Detail

  POHANKA, M.; HORSKÝ, J.; JURIGA, A.; PETRUŠKA, J. Optimalizace chlazení kalibrovaných válců. Tanger. Ostrava: TANGER spol. s.r. o., 2007. p. 1-9.
  Detail

  POHANKA, M. Limitation of thermal inverse algorithm and boundary conditions reconstruction for very fast changes on boundary. In IM2007. Praha: 2007. p. 229-230. ISBN: 978-80-87012-06- 2.
  Detail

  RAUDENSKÝ, M.; HORSKÝ, J.; KOTRBÁČEK, P.; POHANKA, M. Cooling of Rolls Used in Hot Rolling of Long Products. Birmingham: IOM Communications, 2007. p. 1-11.
  Detail

• 2006

  RAUDENSKÝ, M.; HORÁK, A.; HORSKÝ, J.; POHANKA, M.; KOTRBÁČEK, P. Hydraulic Descaling Improvement - Findings of Jet Structure on Water Hammer Effect. La Revue de Mettallurgie. neuvedeno. Paříž: ATS, 2006. p. 34-35.
  Detail

  KOTRBÁČEK, P.; RAUDENSKÝ, M.; HORSKÝ, J.; POHANKA, M. Experimental study of heat transfer in hot rolling. REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 2006, vol. 7-8, no. 103, p. 333-341. ISSN: 0035-1563.
  Detail | WWW

  POHANKA, M. Estimation of discretization error in time and space domain of numerical heat conduction. In IM2006. Svratka: 2006. p. 288-289. ISBN: 80-86246-27- 2.
  Detail

• 2005

  RAUDENSKÝ, M., HORSKÝ, J., POHANKA, M. Experimental Study of Heat Transfer in Hot Rolling and Continuous Casting. In Materials Science, Testing and Informatics II. Materials Science Forum. 2005. Switzerland: Trans Tech Publications LTD, 2005. p. 347-354. ISBN: 0-87849-957- 1. ISSN: 0255- 5476.
  Detail | WWW

  HORSKÝ, J.; VAVREČKA, L.; POHANKA, M. Simulation of Thermal Behaviour of Rolls in Rolling. In Steelsim 2005. Třinec: T-print, s.r.o., 2005. p. 453-461. ISBN: 80-239-5005- 3.
  Detail

  KOTRBÁČEK, P.; HORSKÝ, J.; RAUDENSKÝ, M.; POHANKA, M. Experimental Study of Heat Transfer in Hot Rolling. In 26 Journees Siderurgiques Internationales. Paris: ATS, 2005. p. 1-2. ISBN: 2-911212-05-3.
  Detail

• 2004

  RAUDENSKÝ, M., HORSKÝ, J., KOTRBÁČEK, P., POHANKA, M., TOŠOVSKÝ, J. Experimental study of parameters influencing efficiency of hydraulic descaling - theory of vapour explosion. In Hydraulic Descaling. Londýn: IOM Communications Ltd., 2004. p. 29-38. ISBN: 1059475.
  Detail | WWW

  KOTRBÁČEK, P.; HORSKÝ, J.; RAUDENSKÝ, M.; POHANKA, M. Influence of Parameters of Hydraulic Descaling on Temperature Losses and Surface Quality of Rolled Material. Steel Grips, Journal of steel and related materials, 2004, vol. 2004, no. 2, p. 367-370. ISSN: 1611-4442.
  Detail | WWW

• 2003

  POHANKA, M.; WOODBURY, K. Metoda pohyblivého simplexu pro výpočet meziprostorového koeficientu přenosu tepla pro odlévání slitiny. Inverse Problems in Engng, 2003, vol. 11, no. 5, p. 409-424. ISSN: 1029- 0281.
  Detail

  POHANKA, M. Two- dimensional correction of data measured using a large pressure sensor. In Computational Methods and Experimental Measurements XI. Journal of the Chinese Society of Mechanical Engineers. Neuveden. Londýn: Witpress, 2003. p. 86-84. ISBN: 1-85312-969- 0. ISSN: 0257- 9731.
  Detail | WWW

  POHANKA, M.; WOODBURY, K. A Downhill Simplex method for computation of interfacial heat transfer coefficients in alloy casting. INVERSE PROBLEMS IN ENGINEERING, 2003, vol. 11, no. 5, p. 409-424. ISSN: 1068-2767.
  Detail | WWW

• 2002

  RAUDENSKÝ, M.; HORSKÝ, J.; POHANKA, M. Optimal Cooling of Rolls in Hot Rolling. Journal of Materials Processing Technology, 2002, vol. 2002, no. 125- 126, p. 700-705. ISSN: 0924- 0136.
  Detail

  POHANKA, M.; RAUDENSKÝ, M. Determination of Heat Resistances between Installed Thermocouple and Body Used for Computing Heat Transfer. In Heat Transfer VII. 3. WITPress, 2002. p. 35-42. ISBN: 1853129062.
  Detail

  RAUDENSKÝ, M.; POHANKA, M.; HORSKÝ, J. Combined Inverse Heat Conduction Method for Highly Transient Processes. In Heat Transfer VII. 3. WITPress, 2002. p. 35-42. ISBN: 1853129062.
  Detail

  POHANKA, M. Obtaining Temperature Dependent Thermal Properties of Investment Casting Mold. In Proceedings of IMECE 2002. New Orleans, LA: ASME, 2002. p. 1-6. ISBN: 0791836509.
  Detail

  TOŠOVSKÝ, J.; KOTRBÁČEK, P.; POHANKA, M. Napjatostní analýza vrstvy okují při procesu odkujení. In 40.mezinárodní konference: Experimentální analýzy napětí. Vysoké učení technické v Praze: Vysoké učení technické v Praze, 2002. p. 247-251. ISBN: 80-01-02547- 0.
  Detail

• 2000

  POHANKA, M.; RAUDENSKÝ, M.; HORSKÝ, J. Optimization of parameters of a mathematical model for cooling hot surfaces by nozzles. In 2000. p. 267-272. ISBN: 80-86246-03- 5.
  Detail

  POHANKA, M.; RAUDENSKÝ, M.; HORSKÝ, J. Attainment of more precise parameters of a mathematical model for cooling flat and cylindrical hot surfaces by nozzles. In Advanced Computational methods in Heat Transfer VI. 1. Madrid, Spain: WIT Press, 2000. p. 627-635. ISBN: 1-85312-818- X.
  Detail

• 1999

  POHANKA, M.; RAUDENSKÝ, M.; HORSKÝ, J.; DRUCKMÜLLER, M. Zpřesnění výpočtových modelů tepelných procesů experimentálním stanovením okrajových podmínek. In Svratka: 1999. p. 717-722. ISBN: 80-214-1323- 9.
  Detail

*) Publications are generated once a 24 hours.