Ing.

Michaela Remešová

Ph.D.

CEITEC, RG-2-05 – Researcher

+420 54114 9707
michaela.remesova@ceitec.vutbr.cz

Send BUT message

Ing. Michaela Remešová, Ph.D.

Publications

  • 2023

    TKACHENKO, S.; SLÁMEČKA, K.; OLIVER URRUTIA, C.; KSENZOVA, O.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; DVOŘÁK, K.; BALÁŽ, M.; DEÁK, A.; KACHLÍK, M.; ČELKO, L.; MONTUFAR JIMENEZ, E. Effect of powder milling on sintering behavior and monotonic and cyclic mechanical properties of Mo and Mo-Si lattices produced by direct ink writing. Journal of Materials Research and Technology, 2023, vol. 27, no. 10, p. 2475-2489. ISSN: 2238-7854.
    Detail | WWW | Full text in the Digital Library

    TKACHENKO, S.; BEDNAŘÍKOVÁ, V.; KSENZOVA, O.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CIHLÁŘ, J.; BALÁŽ, M.; DEÁK, A.; ČELKO, L. Microstructure and reduction behavior of Mo powders doped with La2O3 and ZrO2 oxides using the spray drying method. Journal of Alloys and Compounds, 2023, vol. 964, no. 11.6.2023, ISSN: 0925-8388.
    Detail | WWW

    DEÁK, A.; SZABÓ, P.; BEDNAŘÍKOVÁ, V.; CIHLÁŘ, J.; DEMETER, A.; REMEŠOVÁ, M.; COLACINO, E.; ČELKO, L. The first solid-state route to luminescent Au(I)-glutathionate and its pH-controlled transformation into ultrasmall oligomeric Au10-12(SG)10-12 nanoclusters for application in cancer radiotheraphy. Frontiers in Chemistry, 2023, vol. 11, no. 6, ISSN: 2296-2646.
    Detail | WWW | Full text in the Digital Library

  • 2022

    ČELKO, L.; TKACHENKO, S.; CASAS LUNA, M.; DYČKOVÁ, L.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; KOMAROV, P.; DEÁK, A.; BALÁŽ, M.; CRAWFORD, D.; DÍAZ DE LA TORRE, S.; BODOKI, E.; CIHLÁŘ, J. High-energy ball milling and spark plasma sintering of molybdenum - lanthanum oxide (Mo-La2O3) and molybdenum - lanthanum zirconate (Mo-La2Zr2O7) composite powders. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2022, vol. 102, no. 1, p. 1-13. ISSN: 0263-4368.
    Detail | WWW | Full text in the Digital Library

    TKACHENKO, S.; ČELKO, L.; REMEŠOVÁ, M.; BEDNAŘÍKOVÁ, V.; DVOŘÁK, K.; KOMAROV, P.; ZÁBRANSKÝ, K. Microstructure of Mo-La2O3 Composite Powder Prepared Using Two Different High Energy Ball Milling Systems. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. p. 109-114. ISSN: 1012-0394.
    Detail | WWW

    TRAJIC, J.; CURCIC, M.; CASAS LUNA, M.; ROMCEVIC, M.; REMEŠOVÁ, M.; BALAZ, M.; ČELKO, L.; DVOŘÁK, K.; ROMCEVIC, N. Vibrational properties of the mechanochemically synthesized Cu2SnS3: Raman study. Journal of Raman Spectroscopy, 2022, vol. 53, no. 5, p. 977-987. ISSN: 1097-4555.
    Detail | WWW

    BEDNAŘÍKOVÁ, V.; KLAKURKOVÁ, L.; REMEŠOVÁ, M.; HORYNOVÁ, M.; SUCHÝ, J.; PALOUŠEK, D.; ČELKO, L. In Vitro Corrosion Study of Selected Laser Melted WE43 Magnesium Alloy in Hank´s Balanced Salt Solution. In Key Engineering Materials. Key Engineering Materials (web). Switzerland: Trans Tech Publications Ltd, 2022. p. 113-118. ISSN: 1662-9795.
    Detail

    KASHIMBETOVA, A.; TKACHENKO, S.; REMEŠOVÁ, M.; MATA-LEIJA, A.; GEJDOŠ, P.; ČELKO, L.; MONTUFAR JIMENEZ, E. Correlating the Microstructure with the Mechanical Behaviour of Titanium Structures Produced by Robotic Assisted Deposition. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. p. 26-30. ISSN: 1012-0394.
    Detail | WWW

    ČELKO, L.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; CASAS LUNA, M.; KLAKURKOVÁ, L.; ZÁBRANSKÝ, K.; HOLEMÝ, D.; ŠVEJCAR, J. Surface Modification of Alumina Particles to Enhance Bonding Properties with Rubber and Resin in Grinding Tools. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. p. 57-62. ISSN: 1012-0394.
    Detail | WWW

  • 2021

    SUCHÝ, J.; KLAKURKOVÁ, L.; MAN, O.; REMEŠOVÁ, M.; HORYNOVÁ, M.; PALOUŠEK, D.; KOUTNÝ, D.; KRIŠTOFOVÁ, P.; VOJTĚCH, D.; ČELKO, L. Corrosion behaviour of WE43 magnesium alloy printed using selective laser melting in simulation body fluid solution. Journal of Manufacturing Processes, 2021, vol. 69, no. 1, p. 556-566. ISSN: 1526-6125.
    Detail | WWW

    KASHIMBETOVA, A.; TKACHENKO, S.; SLÁMEČKA, K.; REMEŠOVÁ, M.; KLAKURKOVÁ, L.; PAVLOUŠKOVÁ, Z.; ČELKO, L.; MONTUFAR JIMENEZ, E. Extrusion, Debinding and Sintering of a Commercial Pure Titanium Ink for Robocasting. In Proceedings 30th Anniversary International Conference on Metallurgy and Materials. Tanger, 2021. p. 1215-1221. ISBN: 978-80-87294-99-4.
    Detail | WWW | Full text in the Digital Library

    ČELKO, L.; GUTIÉRREZ CANO, V.; CASAS LUNA, M.; MATULA, J.; OLIVER-URRUTIA, C.; REMEŠOVÁ, M.; DVOŘÁK, K.; ZIKMUND, T.; KAISER, J.; MONTUFAR JIMENEZ, E. Characterization of porosity and hollow defects in ceramic objects built by extrusion additive manufacturing. Additive Manufacturing, 2021, vol. 47, no. 1, p. 1-12. ISSN: 2214-8604.
    Detail | WWW

    KOVÁČOVÁ, M.; BALÁŽ, M.; YANKOVYCH, H.; CASAS LUNA, M.; REMEŠOVÁ, M.; ČELKO, L. Adsorption of Copper Ions on Thymus Serpyllum L. Plant for the production of nanocrystalline compound. Nanotechnology and Nanomaterials 2021. 1. Lviv, Ukaine: International Science and Innovation cooperation, 2021. p. 483-483. ISBN: 978-966-97587-3-6.
    Detail | WWW

    KOVÁČOVÁ, M.; YANKOVYCH, H.; CASAS LUNA, M.; REMEŠOVÁ, M.; FINDORÁKOVÁ, L.; STAHORSKÝ, M.; ČELKO, L.; BALÁŽ, M. Adsorption of Copper and Lead Ions on Thymus Serpyllum L. Plant. NANOCON 2021 - Abstracts. 1. Ostrava: Tanger Ltd., 2021. p. 40-40. ISBN: 978-80-88365-00-6.
    Detail

    BALÁŽ, M.; CASAS LUNA, M.; REMEŠOVÁ, M.; ČELKO, L.; TKÁČIKOVÁ, Ľ.; KOVÁČOVÁ, M.; SHPOTYUK, Y. Bio-mechanochemical synthesis of antibacterially active nanocomposite based on Ag nanoparticles, eggshell waste and Thymus serpyllum, L. plant. Nanotechnology and Nanomaterials 2021. 1. Lviv, Ukaine: International Science and Innovation cooperation, 2021. p. 478-478. ISBN: 978-966-97587-3-6.
    Detail | WWW

  • 2020

    REMEŠOVÁ, M.; TKACHENKO, S.; KVARDA, D.; ROČŇÁKOVÁ, I.; GOLLAS, B.; MENELAOU, M.; ČELKO, L.; KAISER, J. Effects of anodizing conditions and the addition of Al2O3/PTFE particles on the microstructure and the mechanical properties of porous anodic coatings on the AA1050 aluminium alloy. Applied Surface Science, 2020, vol. 513, no. 145780, p. 1-10. ISSN: 0169-4332.
    Detail | WWW

    ČELKO, L.; JECH, D.; TKACHENKO, S.; KOMAROV, P.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CTIBOR, P. Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Sisicate Attack. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. p. 360-365. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    PAVLOUŠKOVÁ, Z.; JECH, D.; KOMAROV, P.; ROČŇÁKOVÁ, I.; DYČKOVÁ, L.; REMEŠOVÁ, M.; ČELKO, L.; HOLEMÝ, D. Characterization of High-Speed Alumina Abrasive Grinding Wheel. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 365-369. ISSN: 1662-9507.
    Detail | WWW

    ČELKO, L.; JECH, D.; KOMAROV, P.; REMEŠOVÁ, M.; ROČŇÁKOVÁ, I. Technologie žárových nástřiků. Strojárstvo/Strojírenství, 2020, vol. 3864, no. 9, p. 1-5. ISSN: 1335-2938.
    Detail | WWW

    PÁLENÍČEK, M.; PAPULA, M.; REMEŠOVÁ, M.; JECH, D.; ROČŇÁKOVÁ, I.; ČELKO, L. Anodizing of Pure Magnesium in Sodium Hydroxide Electrolyte Solution. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 440-444. ISSN: 1662-9507.
    Detail | WWW

    JECH, D.; KOMAROV, P.; REMEŠOVÁ, M.; DYČKOVÁ, L.; SLÁMEČKA, K.; RAVASZOVÁ, S.; DVOŘÁK, K.; ČELKO, L. Thermal Cyclic Behaviour of Conventional YSZ and Mullite-YSZ Thermal Barrier Coatings. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 417-422. ISSN: 1662-9507.
    Detail | WWW

    SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. Surface and Coatings Technology, 2020, vol. 384, no. 125328, p. 1-13. ISSN: 0257-8972.
    Detail | WWW

    SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling behaviour of plasma-sprayed thermal barrier coatings with pre-oxidized NiCrAlY and NiCoCrAlY bond-coats. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. p. 439-444. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    JECH, D.; ČELKO, L.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CTIBOR, P. Influence of isothermal oxidation on microstructure of YSZ and Mullite-YSZ thermal barrier coatings. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. p. 378-383. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

  • 2019

    HORYNOVÁ, M.; REMEŠOVÁ, M.; KLAKURKOVÁ, L.; DVOŘÁK, K.; ROČŇÁKOVÁ, I.; YAN, S.; ČELKO, L.; SONG, G. L. Design of tailored biodegradable implants: The effect of voltageon electrodeposited calcium phosphate Coatings on puremagnesium. Journal of the American Ceramic Society, 2019, vol. 102, no. 1, p. 123-135. ISSN: 0002-7820.
    Detail | WWW | Full text in the Digital Library

    ČELKO, L.; MENELAOU, M.; CASAS LUNA, M.; HORYNOVÁ, M.; MUSÁLEK, T.; REMEŠOVÁ, M.; DÍAZ DE LA TORRE, S.; MORSI, K.; KAISER, J. Spark Plasma Extrusion and the Thermal Barrier Concept. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2019, vol. 50, no. 2, p. 656-665. ISSN: 1073-5615.
    Detail | WWW

    JECH, D.; REMEŠOVÁ, M.; KOMAROV, P.; TKACHENKO, S.; ČESÁNEK, Z.; SCHUBERT, J.; HOUDKOVÁ, Š.; ČELKO, L. Evaluation of Microstructure, Phase Composition and Hardness of Alternative Abradable Ceramic Coating Systems Produced by Means of Atmospheric Plasma Spraying. In Binders, Materials and Technologies in Modern Construction V. Solid State Phenomena. Switzerland: Trans Tech Publications, 2019. p. 161-166. ISBN: 978-3-0357-1550-7. ISSN: 1662-9779.
    Detail

    DYČKA, M.; JECH, D.; ROČŇÁKOVÁ, I.; REMEŠOVÁ, M.; DYČKOVÁ, L.; HOLEMÝ, D.; ČELKO, L. Porovnání měřících metod pro stanovení porozity žárovzdorných výrobků s širokou velikostí distribucí pórů. In Hutní keramika 2019. Ostrava: Tanger, spol. s r. o., 2019. p. 68-74. ISBN: 978-80-87294-93-2.
    Detail

  • 2018

    DYČKOVÁ, L.; KOMAROV, P.; REMEŠOVÁ, M.; DYČKA, M.; DVOŘÁK, K.; MENELAOU, M.; ČELKO, L. Optimization of Molybdenum Powder Milling Parameters. ОБРАБОТКА МЕТАЛЛОВ, 2018, vol. 20, no. 3, p. 109-122. ISSN: 1994-6309.
    Detail | WWW

    PÁLENÍKOVÁ, L.; KLAKURKOVÁ, L.; REMEŠOVÁ, M.; ROČŇÁKOVÁ, I. Single Beam Laser Remelted Molybdenum Layer on Aluminum Substrate. In Metal 2017 Conference Prosceedings. 1. Ostrava: TANGER Ltd., 2018. p. 1110-1115. ISBN: 978-80-87294-79-6.
    Detail

    ROČŇÁKOVÁ, I.; SLÁMEČKA, K.; MONTUFAR JIMENEZ, E.; REMEŠOVÁ, M.; DYČKOVÁ, L.; BŘÍNEK, A.; JECH, D.; DVOŘÁK, K.; ČELKO, L.; KAISER, J. Deposition of Hydroxyapatite and Tricalcium Phosphate Coatings by Suspension Plasma Spraying: Effects of Torch Speed. Journal of the European Ceramic Society, 2018, vol. 38, no. 16, p. 5489-5496. ISSN: 0955-2219.
    Detail | WWW | Full text in the Digital Library

    REMEŠOVÁ, M.; ROČŇÁKOVÁ, I.; ČELKO, L.; KAISER, J. Vliv intermetalických částic na anodickou oxidaci hliníkové slitiny EN AW-1050. In Progresivní a netradiční technologie povrchových úprav. 1. Jaroměř: TISK AS, s. r. o., 2018. p. 87-89. ISBN: 978-80-87583-28-9.
    Detail

  • 2017

    SLÁDKOVÁ, L.; PROCHAZKA, D.; POŘÍZKA, P.; ŠKARKOVÁ, P.; REMEŠOVÁ, M.; HRDLIČKA, A.; NOVOTNÝ, K.; ČELKO, L.; KAISER, J. Improvement of the Laser-Induced Breakdown Spectroscopy method sensitivity by the usage of combination of Ag-nanoparticles and vacuum conditions. Spectrochimica Acta Part B, 2017, no. 127, p. 48-55. ISSN: 0584-8547.
    Detail | WWW

    KOMAROV, P.; ČELKO, L.; REMEŠOVÁ, M.; SKOROKHOD, K.; JECH, D.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; MUŠÁLEK, R. The Role of Microstructure on Wettability of Plasma Sprayed Yttria Stabilized Zirconia Coatings. In Metal 2017 Conference Prosceedings. Ostrava: TANGER Ltd., 2017. p. 1116-1121. ISBN: 978-80-87294-79-6.
    Detail

    PAVLOUŠKOVÁ, Z.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; REMEŠOVÁ, M. Influence of microstructure on machinability of material and its final surface quality. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 112-117. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
    Detail

    DYČKOVÁ, L.; KLAKURKOVÁ, L.; GEJDOŠ, P.; REMEŠOVÁ, M.; JULIŠ, M.; ČELKO, L. Causal analysis of damage of a cover. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 57-62. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
    Detail

    ČELKO, L.; JECH, D.; KOMAROV, P.; REMEŠOVÁ, M.; ROČŇÁKOVÁ, I. Technologie žárových nástřiků: Aplikace, kvalita povlaků a rizika při jejich výrobě. Konstrukce Media, s.r.o., 2017, vol. 2017, no. 8, p. 1-5. ISSN: 1803-8433.
    Detail | WWW

    REMEŠOVÁ, M.; KLAKURKOVÁ, L.; ČELKO, L.; SLÁDKOVÁ, L.; JECH, D.; KAISER, J. Anodizing of Zinc-Titanium Alloy in NaOH and KOH Baths. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 399-402. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail | WWW

    REMEŠOVÁ, M.; KLAKURKOVÁ, L.; ROČŇÁKOVÁ, I.; DYČKOVÁ, L.; ČELKO, L.; KAISER, J. Application of Metallographic Analysis Techniques for Detection and Identification of Spray Paint Defects. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 118-123. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
    Detail

    REMEŠOVÁ, M.; KLAKURKOVÁ, L.; HORYNOVÁ, M.; ČELKO, L.; KAISER, J. Preparation of Metallographic Samples with Anodic Layers. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 106-110. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
    Detail | WWW

    KLAKURKOVÁ, L.; HORYNOVÁ, M.; JULIŠ, M.; GEJDOŠ, P.; SKALKA, P.; REMEŠOVÁ, M.; ČELKO, L. Failure analysis of massively failed compressed air cartridge. ENGINEERING FAILURE ANALYSIS, 2017, no. 82, p. 776-782. ISSN: 1350-6307.
    Detail | WWW

    ŠVEJCAR, J.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; REMEŠOVÁ, M.; DYČKOVÁ, L. Analysis of causes of fractures of terminal board bolts. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 93-98. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
    Detail

    ČELKO, L.; JECH, D.; KOMAROV, P.; REMEŠOVÁ, M.; DVOŘÁK, K.; ŠULÁK, I; SMETANA, B.; OBRTLÍK, K. Failure mechanism of yttria stabilized zirconia atmospheric plasma sprayed thermal barrier coatings subjected to calcia-magnesia-aluminosilicate environmental attack. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 39-44. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
    Detail

    HORYNOVÁ, M.; REMEŠOVÁ, M.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; DYČKOVÁ, L. Evaluation of surface degradation of deoxidized AW-AlMg0.7Si alloy. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 136-141. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
    Detail

    ČELKO, L.; JECH, D.; KOMAROV, P.; REMEŠOVÁ, M.; ROČŇÁKOVÁ, I. Technologie žárových nástřiků: Aplikace, kvalita povlaků a rizika při jejich výrobě. In Technologie, kvalita a rizika ve výrobě. Jaroměř: Kudláček, J., 2017. p. 49-53. ISBN: 978-80-87583-20- 3.
    Detail

    GEJDOŠ, P.; KLAKURKOVÁ, L.; JULIŠ, M.; HORYNOVÁ, M.; REMEŠOVÁ, M.; HÉGR, E. Analysis of Surface Layer Defects on Carburezed Steel Component after Alkaline Blackening. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 274-277. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
    Detail | WWW

  • 2016

    REMEŠOVÁ, M.; KLAKURKOVÁ, L.; ČELKO, L.; SLÁDKOVÁ, L.; JECH, D.; KAISER, J. Anodizing of Zinc- Titanium Alloy in NaOH and KOH Baths. Materials Structure & Micromechanics of Fracture. 1. Brno, Czech Republic: Brno University of Technology, 2016. p. 115-115. ISBN: 978-80-214-5357- 9.
    Detail

    REMEŠOVÁ, M.; KLAKURKOVÁ, L.; HORYNOVÁ, M.; ČELKO, L.; KAISER, J. Preparation of Metallographic Samples with Anodizing Layers. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. p. 133-133. ISBN: 978-80-553-2547- 7.
    Detail

    GEJDOŠ, P.; KLAKURKOVÁ, L.; JULIŠ, M.; HORYNOVÁ, M.; REMEŠOVÁ, M.; HÉGR, E. Analysis of Surface Layer Defects on Carburezed Steel Component after Alkaline Blackening. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. p. 92-92. ISBN: 978-80-553-2547- 7.
    Detail

  • 2014

    KLAKURKOVÁ, L.; HÉGR, E.; ČELKO, L.; PODRÁBSKÝ, T.; JULIŠ, M.; REMEŠOVÁ, M.; ŠVEJCAR, J. Comparative Analysis of Hard Anodized Layer on Aluminium Alloy. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publication, 2014. p. 615-618. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.
    Detail

  • 2013

    KLAKURKOVÁ, L.; HÉGR, E.; ČELKO, L.; PODRÁBSKÝ, T.; JULIŠ, M.; REMEŠOVÁ, M.; ŠVEJCAR, J. Comparative Analysis of Hard Anodized Layers on Aluminium Alloy. Abstract Booklet, 15th International Symposium on Metallography, METALLOGRAPHY 013. 1. Košice, Slovakia: Department of Materials Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 156-156. ISBN: 978-80-553-1412- 9.
    Detail

*) Publications are generated once a 24 hours.