Ing.

Karel Slámečka

Ph.D.

FME, IPE – assistant professor

+420 54114 2812
slamecka@fme.vutbr.cz

Send BUT message

Ing. Karel Slámečka, Ph.D.

Publications

  • 2020

    CASAS LUNA, M.; TORRES RODRÍGUEZ, J.; Valdés-Martínez, O. U.; Obradović, N.; SLÁMEČKA, K.; MACA, K.; KAISER, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior. Ceramics International, 2020, vol. 46, no. 7, p. 8853-8861. ISSN: 0272-8842.
    Detail | WWW

    MONTUFAR JIMENEZ, E.; SLÁMEČKA, K.; CASAS LUNA, M.; SKALKA, P.; RAMIREZ-CEDILLO, E.; ZBONČÁK, M.; KAISER, J.; ČELKO, L. Factors governing the dimensional accuracy and fracture modes under compression of regular and shifted orthogonal scaffolds. Journal of the European Ceramic Society, 2020, vol. 40, no. 14, p. 4923-4931. ISSN: 0955-2219.
    Detail | WWW

    SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. Surface and Coatings Technology, 2020, vol. 384, no. 125328, p. 1-13. ISSN: 0257-8972.
    Detail | WWW

    CASAS LUNA, M.; RAVASZOVÁ, S.; SKALKA, P.; GEJDOŠ, P.; JECH, D.; SLÁMEČKA, K.; KAISER, J.; DVOŘÁK, K.; ČELKO, L. Thermal cycling effect on the phase stability and fracture resistance of synthetic barium/magnesium aluminosilicate systems. Ceramics International, 2020, vol. 46, no. 15, p. 24129-24136. ISSN: 0272-8842.
    Detail | WWW

    MONTUFAR JIMENEZ, E.; TKACHENKO, S.; CASAS LUNA, M.; ŠKARVADA, P.; SLÁMEČKA, K.; DÍAZ DE LA TORRE, S.; KOUTNÝ, D.; PALOUŠEK, D.; KOLEDOVÁ, Z.; HERNÁNDEZ-TAPIA, L.; ZIKMUND, T.; ČELKO, L.; KAISER, J. Benchmarking of additive manufacturing technologies for commercially-pure-titanium bone-tissue-engineering scaffolds: processing-microstructure-property relationship. Additive Manufacturing, 2020, vol. 36, no. 101516, p. 1-13. ISSN: 2214-8604.
    Detail | WWW

  • 2019

    SKALKA, P.; SLÁMEČKA, K.; MONTUFAR JIMENEZ, E.; ČELKO, L. Estimation of the effective elastic constants of bone scaffolds fabricated by direct ink writing. Journal of the European Ceramic Society, 2019, vol. 39, no. 4, p. 1586-1594. ISSN: 0955-2219.
    Detail | WWW | Full text in the Digital Library

  • 2018

    SKALKA, P.; SLÁMEČKA, K.; POKLUDA, J.; ČELKO, L. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with a crack at the TGO/bond-coat interface. Surface and Coatings Technology, 2018, vol. 337, no. 1, p. 321-334. ISSN: 0257-8972.
    Detail | WWW

    TKACHENKO, S.; DVOŘÁK, K.; JECH, D.; SLÁMEČKA, K.; KLAKURKOVÁ, L.; PALOUŠEK, D.; ČELKO, L. Wear of grinding rotors with thermally-sprayed coatings in a high-speed mill. WEAR, 2018, vol. 412-413, no. 1, p. 49-59. ISSN: 0043-1648.
    Detail | WWW | Full text in the Digital Library

    ROČŇÁKOVÁ, I.; SLÁMEČKA, K.; MONTUFAR JIMENEZ, E.; REMEŠOVÁ, M.; DYČKOVÁ, L.; BŘÍNEK, A.; JECH, D.; DVOŘÁK, K.; ČELKO, L.; KAISER, J. Deposition of Hydroxyapatite and Tricalcium Phosphate Coatings by Suspension Plasma Spraying: Effects of Torch Speed. Journal of the European Ceramic Society, 2018, vol. 38, no. 16, p. 5489-5496. ISSN: 0955-2219.
    Detail | WWW | Full text in the Digital Library

  • 2017

    ČELKO, L.; JECH, D.; DVOŘÁK, K.; ROČŇÁKOVÁ, I.; MONTUFAR JIMENEZ, E.; SLÁMEČKA, K.; KLAKURKOVÁ, L. Powder Processing and Thermal Spraying of Barium-Magnesium-Aluminium-Silicate Enviromental Barier Coatings. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 569-573. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
    Detail | WWW

    KOMAROV, P.; ČELKO, L.; REMEŠOVÁ, M.; SKOROKHOD, K.; JECH, D.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; MUŠÁLEK, R. The Role of Microstructure on Wettability of Plasma Sprayed Yttria Stabilized Zirconia Coatings. In Metal 2017 Conference Prosceedings. Ostrava: TANGER Ltd., 2017. p. 1116-1121. ISBN: 978-80-87294-79-6.
    Detail

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HORYNOVÁ, M.; ŠVEJCAR, J. Formation of Thermally Sprayed Coatings on Grid-like Structure Substrate. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 387-390. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail | WWW

    SLÁMEČKA, K.; POKLUDA. Simple criterion for predicting fatigue life under combined bending and torsion loading. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 41, p. 123-128. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    TRUBAČOVÁ, P.; PÍŠKA, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Analysis of Selective Laser Melting Process Parameters Effect on Mechanical and Material Properties for Stainless Steel 316L. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 579-582. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail

    KOMAROV, P.; ČELKO, L.; JECH, D.; PAPULA, M.; SLÁMEČKA, K.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; KAISER, J. Investigations of Wettability of Wear Resistant Coatings Produced by Atmospheric Plasma Spraying. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 230-235. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
    Detail

  • 2016

    SLÁMEČKA, K.; SKALKA, P.; ČELKO, L.; POKLUDA, J.; SAUCEDO-MORA, L.; MARROW, T.; THANDAVAMOORTHY, U. Plasma-sprayed thermal barrier coatings: numerical study on damage localization and evolution. Frattura ed Integrita Strutturale, 2016, vol. 10, no. 35, p. 322-329. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    SLÁMEČKA, K.; ŠESTÁK, P.; VOJTEK, T.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. A fractographic study of bending/torsion fatigue failure in metallic materials with protective surface layers. Advances in Materials Science and Engineering, 2016, vol. 2016, no. 1, p. 1-6. ISSN: 1687-8434.
    Detail | WWW | Full text in the Digital Library

    SLÁMEČKA, K.; SKALKA, P.; POKLUDA, J.; ČELKO, L. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with an irregular top-coat/bond-coat interface. Surface and Coatings Technology, 2016, vol. 304, no. 1, p. 574-583. ISSN: 0257-8972.
    Detail | WWW

    SLÁMEČKA, K.; SKALKA, P.; JECH, D.; KLAKURKOVÁ, L.; ČELKO, L. Critical Locations in Plasma Sprayed Thermal Barrier Coatings Due to Irregularities of Bond Coat Surface. In New Trends on Integrity Reliability Failure. Porto- Portugal: FEUP- INEGI, 2016. p. 387-388. ISBN: 978-989-98832-4- 6.
    Detail

    ČELKO, L.; JECH, D.; DVOŘÁK, K.; ROČŇÁKOVÁ, I.; MONTUFAR JIMENEZ, E.; SLÁMEČKA, K.; KLAKURKOVÁ, L. Powder Processing and Thermal Spraying of Barium-Magnesium-Aluminium- Silicate Enviromental Barier Coatings. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. p. 136-136. ISBN: 978-80-553-2547- 7.
    Detail

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HORYNOVÁ, M.; ŠVEJCAR, J. Formation of Thermally Sprayed Coatings on Grid- like Structure Substrate. Materials Structure & Micromechanics of Fracture. 1. Brno, Czech Republic: Brno University of Technology, 2016. p. 111-111. ISBN: 978-80-214-5357- 9.
    Detail

    TRUBAČOVÁ, P.; PÍŠKA, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Analysis of Selective Laser Melting Process Parameters Effect on Mechanical and Material Properties for Stainless Steel 316L. Solid State Phenomena, 2016, vol. 258, no. 1, p. 579-582. ISSN: 1662-9779.
    Detail | WWW

  • 2015

    SLÁMEČKA, K.; ČELKO, L.; SKALKA, P.; POKLUDA, J.; NĚMEC, K.; JULIŠ, M.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Bending fatigue failure of atmospheric-plasma-sprayed CoNiCrAlY + YSZ thermal barrier coatings. INTERNATIONAL JOURNAL OF FATIGUE, 2015, vol. 70, no. 1, p. 186-195. ISSN: 0142-1123.
    Detail

    SKALKA, P.; SLÁMEČKA, K.; POKLUDA, J.; ČELKO, L. Stability of plasma-sprayed thermal barrier coatings: The role of the waviness of the bond coat and the thickness of the thermally grown oxide layer. Surface and Coatings Technology, 2015, vol. 274, no. 1, p. 26-36. ISSN: 0257-8972.
    Detail

    SLÁMEČKA, K.; ŠESTÁK, P.; VOJTEK, T.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Biaxial Fatigue Fractures of Case-Hardened and High-Temperature-Coatings- Protected Specimens. Powder Metallurgy Progress, 2015, vol. 15, no. special, p. 145-149. ISSN: 1335-8987.
    Detail | WWW

    ČELKO, L.; JECH, D.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; KAISER, J. Princip fukce tepelných bariér připravovaných žárovými nástřiky. Transfer, 2015, vol. 2015, no. 25, p. 42-45. ISSN: 1801- 9315.
    Detail | WWW

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; DVOŘÁČEK, R.; ŠVEJCAR, J. Influence of Technological Parameters on a Quality of Atmospheric Plasma Sprayed Al2O3+ 13TiO2 and Cr2O3 Coatings. In Multi Scale Design of Advanced Materials. Brno: 2015. p. 123-130. ISBN: 978-80-214-5146- 9.
    Detail

    SAUCEDO-MORA, L.; SLÁMEČKA, K.; THANDAVAMOORTHY, U.; MARROW, T. Multi-scale modeling of damage development in a thermal barrier coating. Surface and Coatings Technology, 2015, vol. 276, no. 1, p. 399-407. ISSN: 0257-8972.
    Detail

  • 2014

    SLÁMEČKA, K.; NĚMEC, K.; ČELKO, L.; HORNÍKOVÁ, J.; POKLUDA, J.; ŠVEJCAR, J. Bending Fatigue Behaviour of Diffusion and Thermal Barrier Coating Systems. In Key Engineering Materials. Key Engineering Materials (print). Zurich-Durnten, Switzerland: Trans Tech Publications Ltd, 2014. p. 716-719. ISBN: 9783037859346. ISSN: 1013-9826.
    Detail | WWW

    JECH, D.; ČELKO, L.; JULIŠ, M.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; OBRTLÍK, K.; ŠVEJCAR, J. Critical Weak Points of Atmospheric Plasma Sprayed Thermal Barrier Coatings. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publication, 2014. p. 567-572. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.
    Detail | WWW

    ŠVEJCAR, J.; ČELKO, L.; DVOŘÁČEK, E.; KLAKURKOVÁ, L.; JULIŠ, M.; SLÁMEČKA, K.; ZAPLETAL, J. Thermal Spray Technology and Casting in Renovation of Friction Bearings Surface. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publication, 2014. p. 573-577. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.
    Detail | WWW

    ČELKO, L.; KLAKURKOVÁ, L.; SMETANA, B.; SLÁMEČKA, K.; ŽALUDOVÁ, M.; HUI, D.; ŠVEJCAR, J. Application of sacrificial coatings and effect of composition on Al-Al3NI Ultrafine eutectic formation. Journal of Mining and Metallurgy, Section B: Metallurgy, 2014, vol. 50, no. 1, p. 31-36. ISSN: 1450-5339.
    Detail

    ČELKO, L.; DÍAZ DE LA TORRE, S.; KLAKURKOVÁ, L.; KAISER, J.; SMETANA, B.; SLÁMEČKA, K.; ŽALUDOVÁ, M.; ŠVEJCAR, J. Temperature effect on the microstructural development of Al–Ni layered binary couples produced by an unconventional method. Surface and Coatings Technology, 2014, vol. 258, no. 1, p. 95-101. ISSN: 0257-8972.
    Detail | WWW

    VOJTEK, T.; POKLUDA, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Description of Fatigue Crack Growth under Modes II, III and II+III in Terms of J- integral. Procedia Materials Science, 2014, vol. 3, no. 1, p. 835-840. ISSN: 2211-8128.
    Detail

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; DVOŘÁČEK, E.; ŠVEJCAR, J. Wear Resistant Coatings Deposited by Air Plasma Spraying Under Different Technological Parameters. In 46th International October Conference on Mining and Metallurgy - IOC 2014 – Proceedings. 46. Belegrade, Serbia: University of Belgrade - Technical Faculty in Bor, 2014. p. 659-662. ISBN: 978-86-6305-026- 6.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SMETANA, B.; ŽALUDOVÁ, M.; ŠVEJCAR, J. Effect of Heat Treatment on Formation of Al-Al3Ni Hypereutectic Alloy. In Key Engineering Materials. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 513-516. ISBN: 9783037859346. ISSN: 1013-9826.
    Detail | WWW

    JECH, D.; ČELKO, L.; CHRÁSKA, T.; SLÁMEČKA, K.; KLAKURKOVÁ, L.; DUBSKÝ, J.; ŠVEJCAR, J. Influence of Isothermal Exposure on Microstructural Changes Resulting in Delamination of Eutectic Al2O3+ZrO2+ SiO2 Thermal Barrier Coating. In Metal 2014. 1. Ostrava: TANGER Ltd., 2014. p. 885-890. ISBN: 978-80-87294-54- 3.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; JECH, D.; JULIŠ, M.; SLÁMEČKA, K.; ŠVEJCAR, J. Microstructure Development and Phlase Evolutin of Nickel Coated Aluminium and Hydronalium Substrates. In Metal 2014 Conference Prosceedings. 1. Ostrava: TANGER Ltd., 2014. p. 915-920. ISBN: 978-80-87294-54- 3.
    Detail

    ČELKO, L.; JECH, D.; CHRÁSKA, T.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SPOTZ, Z.; DUBSKÝ, J.; ŠVEJCAR, J. Formation and Growth of Thermally Grown Oxide in Two Different Atmospheric Plasma Sprayed Thermal Barrier Coating Systems. ICCE-22, Saint Julian´s, Malta, Proceedings. 22. Saint Julian´s, Malta: International Community for composites/ Nano Engineering, 2014. p. 145-146.
    Detail

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; DVOŘÁČEK, E.; ŠVEJCAR, J. Influence of Technological Parameters on a Quality of Atmospheric Plasma Sprayed Al2O3+13% TiO2 and Cr2O3 Coatings. Saint Julian´s, Malta: International Community for composites/ Nano Engineering, 2014. p. 401-402.
    Detail

    ČELKO, L.; SMETANA, B.; KLAKURKOVÁ, L.; ZLÁ, S.; SLÁMEČKA, K.; ŠVEJCAR, J. Formation of Eutectic in Nickel Coated Hydronalium Alloy After the Heat Treatment. In 46th International October Conference on Mining and Metallurgy - IOC 2014 – Proceedings. 46. Belegrade, Serbia: University of Belgrade - Technical Faculty in Bor, 2014. p. 663-666. ISBN: 978-86-6305-026- 6.
    Detail

    VOJTEK, T.; POKLUDA, J.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R. 3D Morphology of Fracture Surfaces Created by Mixed-mode II+III Fatigue Loading in Metallic Materials. Procedia Engineering, 2014, vol. 74, no. 1, p. 74-77. ISSN: 1877-7058.
    Detail | WWW | Full text in the Digital Library

  • 2013

    SLÁMEČKA, K.; KIANICOVÁ, M.; POKLUDA, J. Fractographically-aided Analysis of Fish- eye Crack Growth in Nitrided Steel. Journal of Theoretical and Applied Mechanics, 2013, vol. 51, no. 2, p. 439-446. ISSN: 1429- 2955.
    Detail

    SLÁMEČKA, K.; POKLUDA, J.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; OBRTLÍK, K. Fatigue Life of Cast Inconel 713LC with/without Protective Diffusion Coating under Bending, Torsion and their Combination. Engineering Fracture Mechanics, 2013, vol. 110, no. 1, p. 459-467. ISSN: 0013- 7944.
    Detail

    ČELKO, L.; JECH, D.; SKALKA, P.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SPOTZ, Z.; ŠVEJCAR, J. Microstructural Characterization of Thermally Grown Oxide in Atmospheric Plasma Sprayed Thermal Barier Coatings. ICCE-21, Tenerife, Proceedings. 1. Spain: Universidad de La Laguna, 2013. p. 1-2.
    Detail

    ŠVEJCAR, J.; ČELKO, L.; KLAKURKOVÁ, L.; JULIŠ, M.; SLÁMEČKA, K.; ZAPLETAL, J. Thermal Spray Technology and Casting Renovation of Friction Bearing Surface. Slovakia: Department of Material Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 148-148. ISBN: 978-80-553-1412- 9.
    Detail

    KLAKURKOVÁ, L.; ČELKO, L.; SLÁMEČKA, K.; JULIŠ, M.; JULIŠOVÁ, M.; ŠVEJCAR, J. Formation and Morphology of Intermetallic Phases and Eutectic in Iron Coated Thick Aluminium Substrates. YUCOMAT 2013, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2013. p. 73-73.
    Detail

    JECH, D.; ČELKO, L.; JULIŠ, M.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; OBRTLÍK, K.; ŠVEJCAR, J. Critical Weak Points of Atmospheric Plasma Sprayed Thermal Barrier Coatings. Slovakia: Department of Material Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 82-82. ISBN: 978-80-553-1412-9.
    Detail

  • 2012

    ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HUTAŘOVÁ, S.; JULIŠ, M.; NĚMEC, K.; PODRÁBSKÝ, T.; ŠVEJCAR, J. STRUCTURAL STABILITY OF THERMAL BARRIER COATINGS PRODUCED BY THERMAL SPRAYING. In METAL 2012 Conference proceedings. 1. Ostrava: TANGER Ltd., 2012. p. 998-1004. ISBN: 978-80-87294-29- 1.
    Detail | WWW

    VOJTEK, T.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; SLÁMEČKA, K.; PIPPAN, R.; HOHENWARTER, A. Near-threshold Fatigue Crack Propagation under Mixed-mode II+ III in ARMCO Iron. In 19th European Conference on Fracture. Kazan: 2012. p. 188-193. ISBN: 978-5-905576-18- 8.
    Detail

    POKLUDA, J.; OBRTLÍK, K.; SLÁMEČKA, K.; HORNÍKOVÁ, J.; HUTAŘOVÁ, S.; KIANICOVÁ, M.; PODRÁBSKÝ, T. Fatigue Crack Paths in Cast Inconel 713LC with/ without Al Diffusion Coating under Various Loading and Temperature Conditions. In Proceedings of the 4th International Conference on Crack Paths. 2012. p. 967-975. ISBN: 9788895940441.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; SMETANA, B.; SLÁMEČKA, K.; ŠVEJCAR, J.; ŽALUDOVÁ, M. Formation of Ultrafine Eutectic in Hypereutectic Alloys Produced by Heat Treatment of Nickel Coated. ICCE - 20. Beijing, China: State Key Lab Organic-Inorganic Composites, Beijing University of Chemical Technology, 2012. p. 94-96.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SMETANA, B.; ZLÁ, S.; ŽALUDOVÁ, M. Formation of Hypereutectic Aluminium- based Alloys or Nickel Aluminides Using Sacrificial Nickel Coatings. YUCOMAT 2012, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2012. p. 39-39.
    Detail | WWW

    KLAKURKOVÁ, L.; ČELKO, L.; SLÁMEČKA, K.; DVOŘÁČEK, E.; PODRÁBSKÝ, T.; ŠVEJCAR, J. The Role of Technological Input Parameters on a Quality of Plasma Sprayed Thermal Barrier Coatings. YUCOMAT 2012, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2012. p. 83-83.
    Detail

    PODRÁBSKÝ, T.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HUTAŘOVÁ, S.; ŠVEJCAR, J. Characterization of Slurry Aluminide Diffusion Coatins on Inconel 713LC. YUCOMAT 2012, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2012. p. 87-87.
    Detail | WWW

    HODIS, Z.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K. Atlas of Materials Structures - Educational Software. Technológia vzdelávania, 2012, vol. 20, no. 2, p. 3-7. ISSN: 1335-003X.
    Detail

  • 2011

    KLAKURKOVÁ, L.; ČELKO, L.; SLÁMEČKA, K.; DOLEŽAL, P.; ŠVEJCAR, J. Influence of Temperature on Microhardness of Aluminium-based composites Produced by Controlled Hypereutectic Reaction in Al- Ni Binary System. Chemické listy, 2011, vol. 105, no. S, p. 820-821. ISSN: 0009- 2770.
    Detail

    SLÁMEČKA, K.; POKLUDA, J.; BONAVENTUROVÁ, K.; ČELKO, L. Microfractography of Fish- Eye Fractures in Nitrided Steel. Chemické listy, 2011, vol. 105, no. S, p. 721-724. ISSN: 0009- 2770.
    Detail

    KIANICOVÁ, M.; SLÁMEČKA, K.; POKLUDA, J. Damage of Diffusion Coatings on Turbine Blades. In METAL 2011 Conference Proceedings. Metal. Ostrava: Tanger sro, 2011. p. 840-846. ISBN: 978-80-87294-24- 6.
    Detail

    SLÁMEČKA, K.; BONAVENTUROVÁ, K.; POKLUDA, J. Bending and Torsion Fatigue of Inconel 713LC with and withouth Diffusion Coating. In METAL 2011 Conference Proceedings. Metal. Ostrava: Tanger sro, 2011. p. 692-697. ISBN: 978-80-87294-24- 6.
    Detail

    SLÁMEČKA, K.; KIANICOVÁ, M.; POKLUDA, J. Fractography of Fish-eye Cracks in Nitride Steel Specimens: Assessment of Residual Fatigue Life. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2011, vol. z98, no. 1, p. 1-10. ISSN: 1429- 6055.
    Detail

  • 2010

    ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; MAN, O.; ŠVEJCAR, J. Atlas of Materials Structures -. Acta metalurgica slovaca, 2010, vol. 2010, no. 1, p. 123-128. ISSN: 1338- 1660.
    Detail | WWW

    HOLÁŇ, L.; POKLUDA, J.; SLÁMEČKA, K. Local Aspects of Shear- Mode Crack Propagation in Austenitic Steel. Chemické listy, 2010, vol. 104, no. 15, p. 314-317. ISSN: 0009- 2770.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; MAN, O.; ŠVEJCAR, J. Atlas of Materials Structures - An Useful Apllication for Students in the Field of Materials Sciences and Engineering. YUCOMAT 2010. Belgrade, Serbia: IInstitute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2010. p. 162-162. ISBN: 978-86-80321-25- 7.
    Detail

    POKLUDA, J.; SLÁMEČKA, K.; ŠANDERA, P. Mechanism of Factory- Roof Formation. Engineering Fracture Mechanics, 2010, vol. 77, no. 1, p. 1763-1771. ISSN: 0013- 7944.
    Detail

    SLÁMEČKA, K.; POKLUDA, J.; KIANICOVÁ, M.; MAJOR, Š.; DVOŘÁK, I. Quantitative fractography of fish-eye crack formation under bending- torsion fatigue. INTERNATIONAL JOURNAL OF FATIGUE, 2010, vol. 32, no. 6, p. 921-928. ISSN: 0142- 1123.
    Detail

  • 2009

    HOLÁŇ, L.; PIPPAN, R.; POKLUDA, J.; HORNÍKOVÁ, J.; HOHENWARTER, A.; SLÁMEČKA, K. Near- Threshold Propagation of Mode II and Mode III Cracks. In Crack Paths. Vicenza, Italy: University of Parma, 2009. p. 585-592. ISBN: 0000000000000.
    Detail

    SLÁMEČKA, K.; MAJOR, Š.; POKLUDA, J. SEM- stereofotogrammetrie únavových lomu krutove zatežovaných vzorku s obvodovým vrubem. In FSI Junior konference. Brno: VUTIUM, 2009. p. 56-63. ISBN: 978-80-214-3834- 7.
    Detail

    HOLÁŇ, L.; POKLUDA, J.; SLÁMEČKA, K. Local Aspects of Shear- mode Crack Propagation in Austenitic Steel. In Víceúrovňový design pokrokových materiálů 09. Brno: ÚFM AVČR, 2009. p. 123-130. ISBN: 978-80-254-6070- 2.
    Detail

    POKLUDA, J.; SLÁMEČKA, K.; ŠANDERA, P. On the Mechanism of Factory- Roof Formation. In Crack Paths. Vicenza, Italy: University of Parma, 2009. p. 155-166. ISBN: 0000000000000.
    Detail

  • 2008

    SLÁMEČKA, K.; CHAI, G.; POKLUDA, J. Analysis of Fatigue Crack Propagation and Crack Shielding in Super Duplex Stainless Steel and its Welds. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 2401-2406. ISBN: 9781617823190.
    Detail

    HOLÁŇ, L.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R.; POKLUDA, J. On the Micromechanisms of Fatigue Long Crack Growth under Remote Shear Loading Modes. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 2437-2442. ISBN: 9781617823190.
    Detail

    POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; KOZÁK, V.; HORNÍKOVÁ, J.; ŠANDERA, P. Microstructural Interpretation of Effective Fatigue Threshold of Structural Steel. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 2216-2219. ISBN: 9781617823190.
    Detail

    POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; ŠANDERA, P.; HORNÍKOVÁ, J. Assessment of Extrinsic Crack Tip Shielding in Austenitic Steel near Fatigue Threshold. In Fracture and Damage Mechanics. 1. Seoul: TransTech Publication, 2008. p. 49-52. ISBN: 978-0-87849-369- 2.
    Detail

    HOLÁŇ, L.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R.; POKLUDA, J. Quantitative Fractography of Fatigue Long Crack Growth under Remote Shear Loading Modes. In 25th Danubia- Adria Symposium on Advances in Experimental Mechanics. 2008. p. 87-88. ISBN: 978-80-01-04162- 8.
    Detail

    MAJOR, Š.; SLÁMEČKA, K.; KIANICOVÁ, M.; POKLUDA, J. Fractografical Analysis of Fish- eye Formation under Multiaxial Fatigue. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 1143-1149. ISBN: 9781617823190.
    Detail

    POKLUDA, J.; PODRÁBSKÝ, T.; SLÁMEČKA, K.; POSPÍŠILOVÁ, S.; CHAI, G. Microstructure- aided Analysis of Fatigue Thresholds in Duplex Stainless Steel. Materials Science Forum, 2008, vol. 567- 568, no. 1, p. 101-104. ISSN: 0255- 5476.
    Detail

    POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; ŠANDERA, P.; HORNÍKOVÁ, J. Assessment of Extrinsic Crack Tip Shielding in Austenitic Steel near Fatigue Threshold. Key Engineering Materials, 2008, vol. 385- 387, no. 1, p. 49-52. ISSN: 1013- 9826.
    Detail

    HOLÁŇ, L.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R.; POKLUDA, J. Experimental Evaluation of Fatigue Long Crack Propagation under Remote Shear Loading Modes II and III. Internetový časopis, Materiálovotechnologická fakulta STU so sídlom v Trnave, 2008, vol. 8, no. 4, p. 55-59. ISSN: 1335- 9053.
    Detail

    CHAI, G.; PENG, R. L; SLÁMEČKA, K.; JOHANSSON S. In Situ SEM/ EBSD analysis of fatigue crack propagation behavior of a super duplex stainless steel. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 1350-1357. ISBN: 9781617823190.
    Detail

  • 2007

    SLÁMEČKA, K.; POKLUDA, J.; PONÍŽIL, P.; ŠANDERA, P. Reconstruction and Evaluation of 3D Fracture Surface Morphology. In Advances in Computational & Experimental Engineering and Sciences. 2007. p. 1507-1513. ISBN: 0-9717880-3- 0.
    Detail

    POKLUDA, J.; ŠANDERA, P.; OHLÍDAL, M.; ČERNÝ, M.; PILCH, J.; FLORIAN, Z.; SLÁMEČKA, K.; ŠESTÁK, P.; DOLOŽÍLEK, M.; HORNÍKOVÁ, J. Physical Engineering: Research Support of Mechatronic Models. In Simulation Modelling of Mechatronic Systems II. mechatronika. Brno: VUT v Brně, 2007. p. 15-27. ISBN: 978-80-214-3559- 9.
    Detail

    SLÁMEČKA, K.; PONÍŽIL, P.; POKLUDA, J. Quantitative Fractography in Bending- Torsion Fatigue. Materials Science and Engineering A, 2007, vol. 462, no. 2, p. 359-362. ISSN: 0921- 5093.
    Detail

    SLÁMEČKA, K.; POKLUDA, J.; PONÍŽIL, P.; MAJOR, Š.; ŠANDERA, P. On the topography of fracture surfaces in bending- torsion fatigue. Engineering Fracture Mechanics, 2007, vol. 75, no. 1, p. 760-767. ISSN: 0013- 7944.
    Detail

  • 2006

    POKLUDA, J.; HORÁKOVÁ, H.; SLÁMEČKA, K. Predikce únavové životnosti při zatížení v kombinaci ohyb- krut a fraktografická analýza oceli ČSN 41 5340. In Víceúrovňový design pokrokových materiálů 06. 1. Brno: ÚFM AV ČR, 2006. p. 135-142. ISBN: 80-239-8271- 0.
    Detail

    MAJOR, Š.; PONÍŽIL, P.; SLÁMEČKA, K.; POKLUDA, J. 3D-Fractography in Bending- Torsion Fatigue. In Crack Paths. Parma: University of Parma, 2006. p. CD ROM ( p.)
    Detail

    SLÁMEČKA, K.; MAJOR, Š.; PONÍŽIL, P.; POKLUDA, J. Roughness and Fractal Analysis in Bending- Torsion Fatigue. In Fractography 2006. 1. Stará Lesná: ÚMV SAV, 2006. p. 90-96. ISBN: 80-968543-5- 6.
    Detail

    SLÁMEČKA, K.; POKLUDA, J. On the Fracture Morphology in Bending- Torsion Fatigue. In New Methods of Damage and Failure Analysis of Structural Parts. 1. Ostrava: VŠB- TU, 2006. p. 111-117. ISBN: 80-248-1126- X.
    Detail

    POKLUDA, J.; SLÁMEČKA, K.; HORNÍKOVÁ, J.; ŠANDERA, P. On the Reconstruction of Crack Paths in Biaxial Fatigue. In Fractography 2006. 1. Stará Lesná: ÚMV SAV, 2006. p. 497-500. ISBN: 80-968543-5- 6.
    Detail

    SLÁMEČKA, K.; PONÍŽIL, P.; POKLUDA, J. Quantitative Fractography in Bending- Torsion Fatigue. 2006.
    Detail

  • 2005

    SLÁMEČKA, K.; POKLUDA, J. Analysis of Fracture Morphology and Local Loading Modes in Torsional Fatigue. Materials Science Forum, 2005, vol. 482, no. 0, p. 263-266. ISSN: 0255- 5476.
    Detail

  • 2004

    SLÁMEČKA, K., POKLUDA, J. 3D Analysis of Fatigue Fracture Morphology Generated by Combined Bending - Torsion. In Advanced Fracture Mechanics for Life and Safety Assesments (ECF15). Stockholm: 2004. p. 0 ( p.)
    Detail

  • 2003

    NEMEŠ, R.; SLÁMEČKA, K.; POKLUDA, J. Biaxial Fatigue of High-Strength Low-Alloy Steel. In Transcom. Žilina: ŽU Žilina, 2003. p. 51 ( p.)ISBN: 80-8070-084- 2.
    Detail

    POKLUDA, J., PIPPAN, R., SLÁMEČKA, K., KOLEDNIK, O. Fatigue Crack Growth in Metals under Pure Mode III: Reality or Fiction?. In Fatigue Crack Paths. Parma: 2003. p. 92 ( p.)
    Detail

    SLÁMEČKA, K.; SABIROV, I.; POKLUDA, J.; PIPPAN, R. 3D Morphology of Fracture Surfaces in Bending-Torsion Fatigue. In Transcom. Žilina: ŽU Žilina, 2003. p. 55 ( p.)ISBN: 80-8070-084- 2.
    Detail

    SLÁMEČKA, K.; POKLUDA, J. Stereofotogrammetrická analýza multiaxiálních lomových povrchů oceli ČSN 15340. In Degradácia 03. Žilina: ŽU Žilina, 2003. p. 53 ( p.)ISBN: 80-8070-112- 1.
    Detail

  • 2001

    SLÁMEČKA, K., POKLUDA, J., BARTÍK, L. Životnost nízkolegované oceli při kombinovaném namáhání v krutu a ohybu. In Degradácia vlastností konštrukčných materiálov únavou. Žilina: ŽU Žilina, 2001. p. 36 ( p.)ISBN: 80-7100-873- 7.
    Detail

*) Publications are generated once a 24 hours.