prof. Ing.

Jiří Burša

Ph.D.

FME, ISMMB DTBNMM – Head of sub-department

+420 54114 2868
bursa@fme.vutbr.cz

Send BUT message

prof. Ing. Jiří Burša, Ph.D.

Publications

  • 2019

    ŠEDIVÝ, D.; BURŠA, J.; FIALOVÁ, S. Experimental and numerical investigation of flow field in flexible tube. In IOP Conference Series: Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. 2019. p. 1-7. ISSN: 1755-1315.
    Detail | WWW

    SKÁCEL, P.; BURŠA, J. Compressibility of arterial wall – direct measurement and predictions of compressible constitutive models. Journal of the mechanical behavior of biomedical materials, 2019, vol. 90, no. 1, p. 538-546. ISSN: 1751-6161.
    Detail | WWW

    TURČANOVÁ, M.; HRTOŇ, M.; DVOŘÁK, P.; BURŠA, J. Influnce of Mutual Rotation of Polarizing Filters on Light Intensity Measured with Collagen Figres. In VipIMAGE 2019. 2019. p. 279-285. ISBN: 978-3-030-32040-9.
    Detail

    LISICKÝ, O.; MALÁ, A.; BURŠA, J. Influence of Transversal Resolution on Reconstructing Atherosclerotic Plaque Components. In VipIMAGE 2019. Porto, Portugalsko: Springer, 2019. p. 501-508. ISBN: 978-3-030-32039-3.
    Detail | WWW

    BURŠA, J.; SLAŽANSKÝ, M. Computational investigation of the impact of assumption of affine deformation on constitutive models of soft tissues. Applied andComputational Mechanics, 2019, vol. 13, no. 2, p. 99-106. ISSN: 1802-680X.
    Detail | WWW

    FISCHER, J.; BURŠA, J. COMPARISON OF VARIOUS DISTRIBUTONS USED FOR COLLAGEN FIBRE ORIENTATIONS IN ARTERIAL LAYERS. In ENGINEERING MECHANICS 2019. 2019. p. 113-116. ISBN: 978-80-87012-71-0.
    Detail | WWW

  • 2018

    NOVÁK, K.; POLZER, S.; BURŠA, J. Applicability of simplified computational models in prediction of peak wall stress in abdominal aortic aneurysms. Technology and Health Care, Int. Journal of Health Care Engineering, 2018, vol. 26, no. 1, p. 165-173. ISSN: 0928-7329.
    Detail | WWW

    VAVERKA, J.; BURŠA, J.; ŠUMBERA, J.; PÁSEK, M. Effect of Transmural Differences in Excitation-Contraction Delay and Contraction Velocity on Left Ventricle Isovolumic Contraction: A Simulation Study. BioMed Research International, 2018, vol. 2018, no. 2018, p. 1-10. ISSN: 2314-6141.
    Detail | WWW | Full text in the Digital Library

    ŠEDIVÝ, D.; FIALOVÁ, S.; BURŠA, J. Experimentální a numerická studie proudového pole v elastické trubici. 2018. p. 1-10.
    Detail

    MAN, V.; POLZER, S.; GASSER, T.; NOVOTNÝ, T.; BURŠA, J. Impact of isotropic constitutive descriptions on the predicted peak wall stress in abdominal aortic aneurysms. MEDICAL ENGINEERING & PHYSICS, 2018, vol. 53, no. 1, p. 49-57. ISSN: 1350-4533.
    Detail | WWW

    BANSOD, Y.; JAKKA, V.; BURŠA, J. Bendo-tensegrity model simulates compression test of animal cell. In Engineering Mechanics 2018. 2018. p. 45-48. ISBN: 978-80-86246-88-8.
    Detail | WWW

    BARTOŇOVÁ, P.; POLZER, S.; BURŠA, J. Definition of principal material directions at irregular arterial shapes. In Engineering Mechanics 2018. Engineering Mechanics 2018. 2018. p. 57-60. ISBN: 978-80-86246-88-8. ISSN: 1805-8256.
    Detail | WWW

    BANSOD, Y.; MATSUMOTO, T.; NAGAYAMA, K.; BURŠA, J. A Finite Element Bendo-Tensegrity Model of Eukaryotic Cell. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 2018, vol. 140, no. 10, p. 1-9. ISSN: 0148-0731.
    Detail | WWW

  • 2017

    NOVÁK, K.; POLZER, S.; KŘIVKA, T.; VLACHOVSKÝ, R.; STAFFA, R.; KUBÍČEK, L.; LAMBERT, L.; BURŠA, J. Correlation between transversal and orthogonal maximal diameters of abdominal aortic aneurysms and alternative rupture risk predictors. COMPUTERS IN BIOLOGY AND MEDICINE, 2017, vol. 83, no. 3, p. 151-156. ISSN: 0010-4825.
    Detail | WWW

  • 2016

    SKÁCEL, P.; BURŠA, J. Poisson's ratio of arterial wall – inconsistency of constitutive models with experimental data. Journal of the mechanical behavior of biomedical materials, 2016, vol. 54, no. 1, p. 316-327. ISSN: 1751-6161.
    Detail | WWW

    FEDOROVA, S.; BURŠA, J. Application of polar elasticity to the problem of pure bending of a thick plate. In ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering. Crete, Greece: National Technical University of Athens, 2016. p. 2162-2171. ISBN: 9786188284401.
    Detail

    SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. Analysis of Accuracy of Biaxial Tests Based on their Computational Simulations. Strain, 2016, vol. 52, no. 5, p. 424-435. ISSN: 1475-1305.
    Detail

    MAN, V.; POLZER, S.; BURŠA, J. Influence of mesh density on calculated extreme stresses in aortic aneurysms. Applied andComputational Mechanics, 2016, vol. 10, no. 2, p. 97-110. ISSN: 1802-680X.
    Detail | WWW

    BANSOD, Y.; BURŠA, J. Finite element simulation of mechanical tests with bendo-tensegrity models of smooth muscle cell. Vranovska Ves, Czech Republic.: XXIV Cytoskeletal Club, Veterinary Research Institute, Masaryk University., 2016.
    Detail

    Stanislav Polzer, Kamil Novák, Jiří Burša. Feasibility of Incorporating Blood Pressure Distribution into Rupture Risk Assesment of Abdominal Aortic Aneurysm. ESB 2016, Lyon: 2016. p. 1 (1 s.).
    Detail | WWW

  • 2015

    POLZER, S.; GASSER, T.; NOVÁK, K.; MAN, V.; TICHÝ, M.; SKÁCEL, P.; BURŠA, J. Structure-based constitutive model can accurately predicts planar biaxial properties of arotic wall tissue. Acta Biomaterialia, 2015, vol. 14, no. 1, p. 133-145. ISSN: 1742-7061.
    Detail

    NOVÁK, K.; POLZER, S.; TICHÝ,M.; BURŠA, J. Automatic Evaluation of Collagen Fiber Directions from Polarized Light Microscopy Images. MICROSCOPY AND MICROANALYSIS, 2015, vol. 21, no. 4, p. 863-875. ISSN: 1431-9276.
    Detail | WWW

    FEDOROVA, S. Computational Modeling of Fiber Composites with Thick Fibers as Homogeneous Structures with Use of Couple Stress Theory. In Design and Analysis of Reinforced Fiber Composites. Pedro V. Marcal, Nobuki Yamagata. 2015. p. 25-47. ISBN: 978-3-319-20007- 1.
    Detail | WWW

    SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. Finite element based parametric study of inaccuracies in mechanical testing of soft tissue. 2015.
    Detail

    BANSOD, Y.; BURŠA, J. Computational model of vascular smooth muscle cell. Vranovska Ves, Czech Republic.: XXIII Cytoskeletal Club, Veterinary Research Institute, Masaryk University., 2015.
    Detail

    POLZER, S.; BURŠA, J.; MAN, V. ALGORITHM FOR INTRODUCING RESIDUAL STRESSES INTO FINITE ELEMENT MODELS OF ANEURYSMS. Prague: 2015.
    Detail

    MAN, V.; SKÁCEL, P.; POLZER, S.; ŠEVČÍK, V.; BURŠA, J. PRACTICAL ASPECT OF BIAXIAL TESTING OF VASCULAR TISSUE. Prague: 2015.
    Detail

    SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. ANALYSIS OF ACCURACY OF BIAXIAL TESTS BASED ON COMPUTATIONAL SIMULATIONS. In CMBE15, 4th International Conference on Computational & Mathematical, Biomedical Engineering. Swansea, United- Kingdom: CMBE, Zeta Computational Resources Ltd.Swansea, United- Kingdom, 2015. p. 168-171. ISBN: 978-0-9562914-3- 1.
    Detail

    BANSOD, Y.; BURŠA, J. Continuum-based modeling approaches to cell mechanics. World Academy of Science, Engineering and Technology, 2015, vol. 2, no. 9, p. 1202-1213. ISSN: 1307- 6892.
    Detail

    FEDOROVA, S.; LASOTA, T.; BURŠA, J. Application of couple- stress theory for description of large strain bending of fibre composites. 2015. p. 148-148.
    Detail | WWW

  • 2014

    BURŠA, J.; BANSOD, Y. Design and applications of prestressed tensegrity structures. In Engineering Mechanics 2014, Book of full texts. Svratka: Czech Society for Mechanics, 2014. p. 30-33. ISBN: 978-80-214-4871-1.
    Detail

    BANSOD, Y.; BURŠA, J. Tensigrity Principle Based Computational Model of Cytoskeleton. In 6th World Conference on Structural Control and Monitoring (6WCSCM). Barcelona, Spain: 6th World Conference on Structural Control and Monitoring (6WCSCM)., 2014. p. 3317-3326. ISBN: 978-84-942844-5- 8.
    Detail

    BANSOD, Y.; NANDANWAR, D.; BURŠA, J. Overview of Tensegrity - I: Basic structures. Engineering Mechanics, 2014, vol. 21, no. 5, p. 355-367. ISSN: 1805- 4633.
    Detail

    BANSOD, Y.; BURŠA, J. Overview of Tensegrity - II: High frequency spheres. Engineering Mechanics, 2014, vol. 21, no. 6, p. 437-449. ISSN: 1805- 4633.
    Detail

    SKÁCEL, P.; BURŠA, J. Comparison of constitutive models of arterial layers with distributed collagen fibre orientations. Acta of Bioengineering and Biomechanics, 2014, vol. 2014, no. 03, p. 47-58. ISSN: 1509-409X.
    Detail | WWW

    SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. Finite element analyses of biaxial tension testing with different ways of specimen clamping. 2014.
    Detail

    MAN, V.; NOVÁK, K.; POLZER, S.; BURŠA, J. Can Laplace law replace more sophisticated analyses of aortic aneurysms?. Špičák: 2014.
    Detail

    MAN, V.; NOVÁK, K.; POLZER, S.; BURŠA, J. Applicability of simplified models of abdominal aortic aneurysms. Barcelona: 2014.
    Detail

    NOVÁK, K.; POLZER, S.; TICHÝ, M.; BURŠA, J. Automatic evaluation of collagen fibre directions from polarized light microscopy images. 2014. p. 1-2.
    Detail | WWW

    BURŠA, J.; BANSOD, Y. Models of Living Cells on the Basis of Tensegrity Structures. In 6th World Conference on Structural Contral and Monitoring. Barcelona, Spain.: 6th World Conference on Structural Control and Monitoring (6WCSCM)., 2014. p. 140-146. ISBN: 978-84-942844-5- 8.
    Detail

    BANSOD, Y.; BURŠA, J. Tensigrity Models of Mechanical Behaviour of Living Cell. Spicak, Czech Republic.: Computational Mechanics 2013 Conference; University of West Bohemia, Pilsen 2013, 2014.
    Detail

    BANSOD, Y.; BURŠA, J. Computational Model of Cytoskeleton Based on Tensegrity Principle. Vranovska Ves, Czech Republic.: XXII Cytoskeletal Club, Veterinary Research Institute, Masaryk University., 2014.
    Detail

    BANSOD, Y.; BURŠA, J. Computational model of intracelluar structure for simulation of mechanical tests of cells. Barcelona, Spain: 11th World Congress on Computational Mechanics (WCCM)., 2014.
    Detail

    BANSOD, Y.; BURŠA, J. Application of tensegrity principle to Cytoskeleton. Barcelona, Spain: 6th World Conference on Structural Control and Monitoring., 2014.
    Detail

    BANSOD, Y.; BURŠA, J. A Concise Review of Soft Glassy Rheological Model of Cytoskeleton. Engineering Mechanics, 2014, vol. 21, no. 4, p. 279-285. ISSN: 1805- 4633.
    Detail

  • 2013

    HOENICKA, M.; SIEGFRIED, S.; BURŠA, J.; HUBER, G.; HOLGER, B.; BIRNBAUM, D.; SCHMID, C. Development of endothelium-denuded human umbilical veins as living scaffolds for tissue-engineered small- calibre vascular grafts. J TISSUE ENG REGEN M, 2013, vol. 7, no. 4, p. 324-336. ISSN: 1932- 6254.
    Detail

    FEDOROVA, S. Computational modelling of fibre- reinforced hyperelastic solids with fibre bending stiffness. Brno: 2013. p. 61-61. ISBN: 978-80-214-4739- 4.
    Detail

    POLZER, S.; GASSER, T.; BURŠA, J.; STAFFA, R.; VLACHOVSKÝ, J.; MAN, V.; SKÁCEL, P. Importance of material model in wall stress prediction in abdominal aortic aneurysms. MEDICAL ENGINEERING & PHYSICS, 2013, vol. 35, no. 4, p. 1282-1289. ISSN: 1350- 4533.
    Detail

    MAN, V.; STAFFA, R.; BURŠA, J. The maximum stresses in aortic aneurysms calculated on the dependence of mesh density. BOOK OF EXTENDED ABSTRACTS 29th conference with international participation Computational Mechanics 2013. Plzeň, Czech Republic: University of West Bohemia, 2013. p. 79-80. ISBN: 978-80-261-0282- 3.
    Detail

    POLZER, S.; GASSER, T.; FORSELL, C.; DRUCKMÜLLEROVÁ, H.; TICHÝ, M.; STAFFA, R.; VLACHOVSKÝ, R.; BURŠA, J. Automatic Identification and Validation of Planar Collagen Organization in the Aorta Wall with Application to Abdominal Aortic Aneurysm. MICROSCOPY AND MICROANALYSIS, 2013, vol. 19, no. 6, p. 1395-1404. ISSN: 1431- 9276.
    Detail

    VERKERKE, G.; VAN DER HOUWEN, E.; BROEKHUIS, A.; BURŠA, J.; CATAPANO, G.; MCCULLAGH, P.; MOTTAGHY, K.; NIEDERER, P.; REILLY, R.; ROGALEWICZ, V.; SEGERS, P.; VERDONSCHOT, N. Science versus design; comparable, contrastive or conducive?. Journal of the mechanical behavior of biomedical materials, 2013, vol. 41, no. 7, p. 1516-1527. ISSN: 1751- 6161.
    Detail

    SKÁCEL, P.; BURŠA, J. Numerical implementation of constitutive model for arterial layers with distributed collagen fibre orientations. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 2013, vol. 2014, no. 01, p. 1-13. ISSN: 1025-5842.
    Detail | WWW

    POLZER, S.; BURŠA, J.; GASSER, T.; STAFFA, R.; VLACHOVSKÝ, R. A numerical implementation to predict residual strains from the homogeneous stress hypothesis with application to abdominal aortic aneurysms. ANNALS OF BIOMEDICAL ENGINEERING, 2013, vol. 41, no. 7, p. 1516-1527. ISSN: 0090- 6964.
    Detail

  • 2012

    POLZER, S.; BURŠA, J. Simulation of residual stresses (strains) in arteries. In IFMBE Proceedings, Volume 37. Budapest: Springer, 2012. p. 454-457. ISBN: 978-3-642-23507- 8.
    Detail

    BURŠA, J.; HOLATA, J.; LEBIŠ, R. Tensegrity finite element models of mechanical tests of individual cells. Technology and Health Care, Int. Journal of Health Care Engineering, 2012, vol. 20, no. 2, p. 135-150. ISSN: 0928- 7329.
    Detail

    LASOTA, T.; BURŠA, J.; FEDOROVA, S. Constitutive equations and finite element formulation for anisotropic hyperelastic composites based on constrained Cosserat continuum. In ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e- Book Full Papers. Vienna: Elsevier, 2012. p. 3379-3389. ISBN: 978-3-9502481-9- 7.
    Detail

    JANÍČEK, P.; BURŠA, J. Characteristics of Science and Scientific Activities: Considerations about What Is and What Is Not Scientific. Journal of Mechanics Engineering and Automation, 2012, vol. 2, no. 9, p. 573-583. ISSN: 2159- 5275.
    Detail

    FEDOROVA, S.; LASOTA, T.; BURŠA, J.; SKÁCEL, P. Experimental verification of a constitutive model of fibre composite with hyperelastic matrix. In EAN Proceedings 50th annual conference on experimental stress analysis. Tábor: CTU Prague, 2012. p. 65-72. ISBN: 978-80-01-05060- 6.
    Detail

    POLZER, S.; GASSER, T.; MARKERT, B.; BURŠA, J.; SKÁCEL, P. Impact of poroelasticity of intraluminal thrombus on wall stress of abdominal aortic aneurysms. BIOMED ENG ONLINE, 2012, vol. 11, no. 62, p. 1-13. ISSN: 1475- 925X.
    Detail

  • 2011

    SKÁCEL, P.; BURŠA, J. Material parameter identification of arterial wall layers from homogenized stress- strain data. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 2011, vol. 14, no. 01, p. 33-41. ISSN: 1025- 5842.
    Detail

    LASOTA, T.; BURŠA, J. Simulation of mechanical tests of composite material using anisotropic hyperelastic constitutive models. Engineering Mechanics, 2011, vol. 18, no. 1, p. 23-32. ISSN: 1802- 1484.
    Detail

    JANÍČEK, P.; BURŠA, J. Characteristics of science and scientific activities; Considerations about what is and what is not scientific. In Engineering Mechanics 2011; Book of full texts. 1. Prague: Institute of Thermomechanics - Academy of Sciences of the Czech Republic - Prague, 2011. p. 25-32. ISBN: 978-80-87012-33- 8.
    Detail

    ČECH, V.; JANEČEK, P.; LASOTA, T.; BURŠA, J. A fiber-bundle pull-out test for surface-modified glass fibers in GF/ polyester composite. COMPOSITE INTERFACES, 2011, vol. 18, no. 4, p. 309-322. ISSN: 0927- 6440.
    Detail

    POLZER, S.; BURŠA, J.; SWEDENBORG, J.; GASSER, T. The impact of Intra- luminal Thrombus failure on the mechanical stress in the wall of Abdominal Aortic Aneurysms. EUROPEAN JOURNAL OF VASCULAR AND ENDOVASCULAR SURGERY, 2011, vol. 41, no. 4, p. 467-473. ISSN: 1078- 5884.
    Detail

  • 2010

    BURŠA, J.; MUCHA, P.; SKÁCEL, P. Finite element model of abdominal aortic aneurysm. In IFMBE Proceedings. Munich, Germany: Springer, 2010. p. 185-188. ISBN: 978-3-642-03897- 6.
    Detail

    DĚTÁK, M.; BURŠA, J.; ZEMÁNEK, M. Influence of geometric simplifications on stresses and strains in aneurysm model. In IFMBE Proceedings. Munich, Germany: Springer, 2010. p. 529-532. ISBN: 978-3-642-03897- 6.
    Detail

    POLZER, S.; BURŠA, J. poroelastic model of intraluminal thrombus in FEA of aortic aneurysm. In 6th world congress of biomechanics. singapore: springer, 2010. p. 763-767. ISBN: 978-3-642-14514- 8.
    Detail

    POLZER, S.; BURŠA, J. MODEL SIMPLIFICATION AND BOUNDARY CONDITIONS OF ABDOMINAL AORTIC ANEURYSM. In Engineering mechanics 2010. 2010. p. 270-279. ISBN: 978-80-87012-26- 0.
    Detail

    POLZER, S.; BURŠA, J. FEA of prestressed abdominal aortic aneurysm. In Human biomechanics 2010. 2010. p. 109-110. ISBN: 978-80-87012-26- 0.
    Detail

  • 2009

    BURŠA, J.; FUIS, V. Finite element simulation of mechanical tests of individual cells. In IFMBE Proceedings. Munich, Germany: Springer, 2009. p. 16-19. ISBN: 978-3-642-03897- 6.
    Detail

    BURŠA, J.; JANÍČEK, P. Systemic approach to modelling of constitutive behaviour of various types of matter. Part I - basic and simple constitutive models. Engineering Mechanics, 2009, vol. 16, no. 4, p. 1-15. ISSN: 1802- 1484.
    Detail

    BURŠA, J.; JANÍČEK, P. Systemic approach to modelling of constitutive behaviour of various types of matter. Part II - combined constitutive models in solid mechanics. Engineering Mechanics, 2009, vol. 16, no. 5, p. 1-17. ISSN: 1802- 1484.
    Detail

    ZEMÁNEK, M.; BURŠA, J.; DĚTÁK, M. Biaxial tension tests with soft tissues of arterial wall. Engineering Mechanics, 2009, vol. 16, no. 1, p. 3-12. ISSN: 1802- 1484.
    Detail

    LASOTA, T.; BURŠA, J. Comparison of experiment and simulation of tension and bending tests using anisotropic hyperelastic model. BOOK OF EXTENDED ABSTRACTS. Plzeň 2009: Západočeská univerzita, 2009. p. 1-2. ISBN: 978-80-7043-824- 4.
    Detail

  • 2007

    ZEMÁNEK, M.; BURŠA, J. IDENTIFICATION OF PARAMETERS OF HYPERELASTIC MODELS FROM BIAXIAL TENSION TESTS. In Experimental Stress Analysis. Plzeň: 2007. p. 121-122. ISBN: 978-80-7043-552- 6.
    Detail

    ZEMÁNEK, M.; BURŠA, J. IDENTIFICATION OF PARAMETERS OF CONSTITUTIVE MODELS FOR SOFT TISSUES FROM BIAXIAL TENSION TESTS. In Engineering Mechanics 2007. SVRATKA: Academy od Sciences of the Czech Republic, v.v.i., Prague, 2007. p. 327-328. ISBN: 978-80-87012-06- 2.
    Detail

    BURŠA, J.; ZEMÁNEK, M. Evaluation of Biaxial Tension Tests of Soft Tissues. Technology and Informatics, 2007, vol. 133, no. 1, p. 45-55. ISSN: 0926- 9630.
    Detail

    LASOTA, T.; BURŠA, J. Návrh testování elastomerů a MKP výpočet koncovky klimatizačního vedení. In Konference diplomových prací 2007. Brno: VUT, 2007. p. 1-5. ISBN: 978-80-214-3406- 6.
    Detail

    BURŠA, J.; LEBIŠ, R.; HOLATA, J. Tensegrity FE models of mechanical tests of individual cells. In Short Communications of the International Conference on Computatitonal Biomechanics and Biology. Plzeň: University of West Bohemia, 2007. p. 280 ( p.)ISBN: 978-80-7043-607- 3.
    Detail

    BURŠA, J.; JANÍČEK, P. Systemization of Constitutive Models and Identification of their Parameters. In Proceedings of Conference on Modelling of Heterogeneous Materials. Praha: ČVUT Praha, 2007. p. 1 ( p.)
    Detail

  • 2006

    BURŠA, J.; IVÁN, L.; JANÍČEK, P. STRESS ANALYSIS IN ACETABULUM AESCULAP PLASMACUP SC CERAMICS- CERAMICS. In Human Biomechanics 2006. Hrotovice: Brno University of technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2006. p. 108-109. ISBN: 80-214-3232- 2.
    Detail

    BURŠA, J.; LEBIŠ, R. DOUBLE TENSEGRITY FE MODEL OF CELL USED IN SIMULATION OF ITS INDENTATION TEST. In Human biomechanics 2006. Hrotovice: Brno University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2006. p. 138-139. ISBN: 80-214-3232- 2.
    Detail

    BURŠA, J. TENSEGRITY STRUCTURES AND THEIR APPLICATION IN MODELS OF CYTOSKELETON. In Human Biomechanics 2006. Hrotovice: Brno University of Technology, Institute of Solid mechanics, Mechatronics and Biomechanics, 2006. p. 68-69. ISBN: 80-214-3232- 2.
    Detail

    IVÁN, L., JANÍČEK, P., JANÍČEK, P., BURŠA, J. Stress analysis in acetabulum aesculap plasmatic sc ceramics- ceramics. In HUMAN BIOMECHANICS 2006. Hrotovice: 2006. p. 108 ( p.)ISBN: 80-214-3232- 2.
    Detail

    JANÍČEK, P., BURŠA, J., FUIS, V. Analysis of Credibility of Results of Solutions to Biomechanical Clinical Problems. In HUMAN BIOMECHANICS 2006. Hrotovice: 2006. p. 110 ( p.)ISBN: 80-214-3232- 2.
    Detail

    BURŠA, J.; RYŠAVÝ, P. STRESS STRAIN ANALYSIS OF ABDOMINAL AORTIC ANEURYSM. In Human Biomechanics 2006. Hrotovice: Brno University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2006. p. 178-179. ISBN: 80-214-3232- 2.
    Detail

    BURŠA, J.; LEBIŠ, R. COMPUTATIONAL MODELING OF MECHANICAL BEHAVIOUR OF CELL. In Engineering mechanics 2006. Svratka: Institute of Theoretical and Applied Mechanics, Czech Academy of Sciences, 2006. p. 216-217. ISBN: 80-86246-27- 2.
    Detail

    BURŠA, J.; LEBIŠ, R. Tensegrity FE models of mechanical tests of individual cells. In Abstracts of 5th World Congress of Biomechanics. Munich, Germany: European Society of Biomechanics, 2006. p. CD ( p.)
    Detail

    BURŠA, J.; KUŽELA, P. Significance of cancellous bone orthotropy and non- homogeneity in femoral head. In Abstracts of the 5th world Congress of Biomechanics. Munich, Germany: European Society of Biomechanics, 2006. p. CD ( p.)
    Detail

    BURŠA, J.; MUDRÁK, J.; JANÍČEK, P. Stress concentration in inclined bar and beam shoulders. Inženýrská mechanika - Engineering Mechanics, 2006, vol. 2006 (13), no. 5, p. 329-338. ISSN: 1210- 2717.
    Detail

    BURŠA, J. Human Biomechanics 2006. Hrotovice: ČSB, 2006. p. 1-156. ISBN: 80-214-3232- 2.
    Detail

    BURŠA, J.; LEBIŠ, R.; JANÍČEK, P. FE models of stress- strain states in vascular smooth muscle cell. Technology and Health Care, Int. Journal of Health Care Engineering, 2006, vol. 14, no. 4, 5, p. 311-320. ISSN: 0928- 7329.
    Detail

  • 2005

    ZEMÁNEK, M., BURŠA, J. ZAŘÍZENÍ PRO DVOJOSÉ TAHOVÉ ZKOUŠKY MĚKKÝCH TKÁNÍ. In 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: 2005. p. 84 ( p.)ISBN: 80-214-2373- 0.
    Detail

    SKÁCEL, P.; BURŠA, J. Computational Modelling of Bimaterial Interface Failure in View of Rubber- Steel Interface. Engineering Mechanics, 2005, vol. 12, no. 2, p. 73-85. ISSN: 1802- 1484.
    Detail

    SKÁCEL, P., Burša, J. Computational Modelling of Spherical Cavity Behavior in Rubber- like Solids. Materials Science Forum, 2005, vol. 482, no. 1, p. 323 ( p.)ISSN: 0255- 5476.
    Detail

    JANÍČEK, P.; SKALKA, P.; BURŠA, J.; PEŠLOVÁ, F. Výpočtové modelování deformační stability plechů odporníků elektrických lokomotiv. In Dynamic of Civil Engineering and Transport Structures and Wind Enginering. Žilina: University of Zilina, 2005. p. 136 ( p.)ISBN: 80-8070-382- 5.
    Detail

    Hanáková, S., BURŠA, J., Krmela, J. VÝPOČTOVÝ MODEL MECHANICKÉHO CHOVÁNÍ KOMPOZITU S ELASTOMEROVOU MATRICÍ. In Nečtiny. 2005. p. 189 ( p.)
    Detail

    BURŠA, J., LEBIŠ, R., RYŠAVÝ, P. COMPUTATIONAL MODELLING OF BEHAVIOUR OF SOFT BIOLOGICAL TISSUES. In IFMBE Proceedings. IFMBE Proceedings. Prague: 2005. p. 1538 ( p.)ISSN: 1727- 1983.
    Detail

    LEBIŠ, R., BURŠA, J. Vliv tuhosti komponent buňky na výsledky simulace zkoušky průniku. In Engineering Mechanics 2005. Svratka: 2005. p. 195 ( p.)ISBN: 80-85918-93- 5.
    Detail

    BURŠA, J., JANÍČEK, P., LEBIŠ, R. COMPUTATIONAL MODELLING OF SMOOTH MUSCLE CELLS. In Engineering Mechanics 2005. Svratka: 2005. p. 69 ( p.)ISBN: 80-85918-93- 5.
    Detail

    RYŠAVÝ, P., BURŠA, J., Suškevič, I., Krupa, P. DEFORMAČNĚ- NAPĚŤOVÁ ANALÝZA ANEURYSMATU BŘIŠNÍ AORTY. In 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: 2005. p. 1 ( p.)ISBN: 80-214-2373- 0.
    Detail

    Lebiš, R., BURŠA, J., Janíček, P. MOŽNOSTI MKP VÝPOČTOVÉ SIMULACE ZKOUŠKY PRŮNIKU U ISOLOVANÝCH BUNĚK. In 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: 2005. p. 65 ( p.)ISBN: 80-214-2373- 0.
    Detail

    HANÁKOVÁ, S., BURŠA, J., Krmela, J. VÝPOČTOVÝ MODEL MECHANICKÉHO CHOVÁNÍ KOMPOZITU S ELASTOMEROVOU MATRICÍ. In Proceedings of the 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: 2005. p. 35 ( p.)ISBN: 80-214-2373- 0.
    Detail

    RYŠAVÝ P., BURŠA J. Stress-Strain Analysis of Abdominal Aortic Aneurysm. In Proceedings of the 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: VUT Brno, 2005. p. 75 ( p.)ISBN: 80-214-2373- 0.
    Detail

  • 2004

    BURŠA, J., JANÍČEK, P., LEBIŠ, R. Biomechanics of smooth muscle cells. In Biomechanics of Man. Plzeň: Západočeská Univerzita Plzeň, 2004. p. 46 ( p.)ISBN: 80-7043-315- 9.
    Detail

    BURŠA, J.; JANÍČEK, P.; VAJDÁK, M. ACCURACY ESTIMATION OF ELASTICITY MODULI EVALUATED BY FOUR- POINT BENDING. Inženýrská mechanika - Engineering Mechanics, 2004, vol. 11, no. 6, p. 1 ( p.)ISSN: 1210- 2717.
    Detail

  • 2003

    SKÁCEL, P. Computational Simulation and Accuracy Analysis of Unconventional Experimental Method for Equibiaxial Stress- Strain Dependence Investigation of Elastomers. In Experimental Stress Analysis 2003. Milovy, CZ: Czech Society for Mechanics, 2003. p. 91 ( p.)ISBN: 80-214-2314- 5.
    Detail

    BURŠA, J., JANÍČEK, P. SYSTEM APPROACH TO SOLVING PROBLEMS IN BIOMECHANICS OF BLOOD VESSELS. In Mechatronics, Robotics and Biomechanics 2003. Hrotovice, CZ: ÚMTMB, 2003. p. 16 ( p.)
    Detail

    BURŠA, J., RYŠAVÝ, P., LEBIŠ, R. Stress- Strain Analysis in Anastomoses of Arteries with Vascular Grafts. In World Congress on Medical Physics and Biomedical Engineering. Sydney, Australia: International Federation of Medical and Biological Engineering, 2003. p. 223:15. 07B ( p.)ISBN: 1-877040-14- 2.
    Detail

    BURŠA, J., JANÍČEK, P. EVALUATION OF MODULI OF ELASTICITY FOR THIN LAYERS. Inženýrská mechanika - Engineering Mechanics, 2003, vol. 10, no. 2, p. 149 ( p.)ISSN: 1210- 2717.
    Detail

  • 2002

    BURŠA, J. POSOUZENÍ MOŽNOSTI URČOVÁNÍ KOHEZNÍ PEVNOSTI ZKOUŠKOU V KRUTU. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Prague, CZ: UTAM AS CR?, 2002. p. 31 ( p.)ISBN: 80-01-02547- 0.
    Detail

    VAJDÁK, M., BURŠA, J. Simulace nelineárně elastických ortotropních vlastností tepny pomocí izotropních konečných prvků. In Inženýrská mechanika 2002 Engineering Mechanics 2002. Svratka, ČR: Institute of Mechanics of Solids, Faculty of Mechanical Engineering, Brno University of Technology, 2002. p. 297 ( p.)ISBN: 80-214-2109- 6.
    Detail

    SKÁCEL, P., BURŠA, J. Computational Stress Simulation of Rubber Twist- test via FEM. In Inženýská mechanika 2002 Engineering Mechanics 2002. Svratka: VUT Brno, 2002. p. 261 ( p.)ISBN: 80-214-2109- 6.
    Detail

    BURŠA, J. Experimental- Computational analysis of Cohesion Tests. In Inženýrská mechanika 2002 Engineering Mechanics 2002. Svratka, ČR: Institute of Mechanics of Solids, Faculty of Mechanical Engineering, Brno University of Technology, 2002. p. 13 ( p.)ISBN: 80-214-2109- 6.
    Detail

    JANÍČEK, P., BURŠA, J. Experimental - computational modelling of adhesion strength in composite materials. In Seventh International Conference Damage and Fracture Mechanics VII. Kihei, USA: WITPress, Southampton, Boston, 2002. p. 403 ( p.)ISBN: 1-85312-926- 7.
    Detail

    ČERNÝ, V., BURŠA, J. POSOUZENÍ MOŽNOSTI URČOVÁNÍ KOHEZNÍ PEVNOSTI ZKOUŠKOU V KRUTU. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Prague, CZ: UTAM AS CR?, 2002. p. 31 ( p.)ISBN: 80-01-02547- 0.
    Detail

    SKÁCEL, P., BURŠA, J. Analýza vlivu tření na deformaci pryžového vzorku při zkoušce jednoosým tlakem. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Praha, CZ: UTAM?, 2002. p. 233 ( p.)ISBN: 80-01-02547- 0.
    Detail

    BURŠA, J. URČOVÁNÍ MODULŮ PRUŽNOSTI TENKÝCH VRSTEV. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Praha, CZ: UTAM?, 2002. p. 111 ( p.)ISBN: 80-01-02547- 0.
    Detail

    BURŠA, J. URČOVÁNÍ MODULŮ PRUŽNOSTI TENKÝCH VRSTEV. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Praha, CZ: UTAM?, 2002. p. 111 ( p.)ISBN: 80-01-02547- 0.
    Detail

    JANÍČEK, P., BURŠA, J. URČOVÁNÍ MODULŮ PRUŽNOSTI TENKÝCH VRSTEV. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Praha, CZ: UTAM?, 2002. p. 111 ( p.)ISBN: 80-01-02547- 0.
    Detail

    BURŠA, J. Modelling of stress-strain states in arteries as a pre- requisite for damage prediction. In Seventh International Conference Damage and Fracture Mechanics VII. Kihei, USA: WITPress, Southampton, Boston, 2002. p. 487 ( p.)ISBN: 1-85312-926- 7.
    Detail

    JANÍČEK, P., PEŠLOVÁ, F., KUBÍČEK, J., BURŠA, J., FUIS, V., KOTEK, V., FILÍPEK, J., BUMBÁLEK, L., VLK, M., ČEPERA, M. Metodologie určování mechanických charakteristik plazmatických nástřiků korundovo- baddeleyitové keramiky EUCOR. In Inženýrská mechanika. Brno: VUT FSI Brno, 2002. p. 103 ( p.)ISBN: 80-214-2109- 6.
    Detail

    JANÍČEK, P., BURŠA, J. Experimental - computational modelling of adhesion strength in composite materials. In Seventh International Conference Damage and Fracture Mechanics VII. Kihei, USA: Witpress, southampton, boston, 2002. p. 403 ( p.)ISBN: 1-85312-926- 7.
    Detail

    VAJDÁK, M., BURŠA, J. EXPERIMENT PLANNING IN EVALUATION OF SOFT TISSUE MECHANICAL CHARACTERISTICS. In Proceedings of the International Conference Biomechanics of Man 2002. Čejkovice, CZ: Charles University in Prague, Faculty of Physical Education and Sport, 2002. p. 286 ( p.)ISBN: 80-86317-23- 4.
    Detail

    BURŠA, J., KNOBLOCH, T. STRESS- STRAIN ANALYSIS IN A CONNECTION OF ARTERY AND VASCULAR GRAFT. In Proceedings of the International Conference Biomechanics of Man 2002. Čejkovice, CZ: Charles University in Prague, Faculty of Physical Education and Sport, 2002. p. 173 ( p.)ISBN: 80-86317-23- 4.
    Detail

    BURŠA, J. Výpočtové modelování deformačně- napjatostních stavů tepen. Acta Mechanica Slovaca, 2002, vol. 2002, no. 1, p. 140 ( p.)ISSN: 1335- 2393.
    Detail

    VAJDÁK, M., KNOBLOCH, T., BURŠA, J. Modelování napjatosti ve spojích tepen s cévními náhradami. Acta Mechanica Slovaca, 2002, vol. 2002, no. 1, p. 141 ( p.)ISSN: 1335- 2393.
    Detail

  • 2001

    BURŠA, J. Stress- strain analysis of an overlapped connection of artery and vascular graft. In Inženýrská mechanika 2001- EMGINEERING MECHANICS 2001. Svratka, CZ: IT AS CR Praha, AEM, ISM FME BUT Brno, ITAM AS CR Praha, 2001. p. 311 ( p.)ISBN: 80-85918-64- 1.
    Detail

    BURŠA, J. Mechanical Optimization of Geometry of the System “Artery-Vascular Graft”. In Mechatronics and Robotics. Třešť: IM BUT Brno, MC IT CAS, CC IFToMM, 2001. p. 45 ( p.)ISBN: 80-7204-207- 6.
    Detail

    JANÍČEK, P., FUIS, V., PEŠLOVÁ, F., KOTEK, V., REINISCH, M., BURŠA, J. EXPERIMENTAL AND COMPUTATIONAL INVESTIGATION OF ELASTIC CHARACTERISTICS OF POROUS MATERIALS. In Experimentální Analýza Napětí 2001. Praha: Ústav teoretické a aplikované mechaniky AV ČR, 2001. p. 125 ( p.)ISBN: 80-86246-09- 4.
    Detail

    BURŠA, J. CONSTITUTIVE CHARACTERISTICS OF RUBBER AT NORMAL, HIGH AND LOW TEMPERATURES. Materiálové inžinierstvo, 2001, vol. 8, no. 4, p. 27 ( p.)ISSN: 1335- 0803.
    Detail

    BURŠA, J. Experimental- computational Modelling of Damage of Steel reinforced Rubber Composite. In Theoretical and Experimental Problems of Materials Engineering. Púchov: FIT UT Trenčín, Matador Púchov, 2001. p. 18 ( p.)ISBN: 80-968099-5- 4.
    Detail

    BURŠA, J. Experimental-computational analysis of adhesion and fracture in composite “rubber-steel wire rope”. In Inženýrská mechanika 2001 Engineering Mechanics 2001. Svratka, CZ: IT AS CR Praha, AEM, ISM FSI VUT Brno, ITAM AS CR Praha, 2001. p. 44 ( p.)ISBN: 80-85918-64- 1.
    Detail

    BURŠA, J. EXPERIMENTÁLNÍ URČOVÁNÍ ELASTICKÝCH PARAMETRŮ PRYŽÍ PŘI RŮZNÝCH TEPLOTÁCH. In Experimentální analýza napětí 2001. Tábor, CZ: FTC CTU Praha, ITAM AS CR Praha, CSM, 2001. p. 25 ( p.)ISBN: 80-86246-09- 4.
    Detail

    BURŠA, J. EXPERIMENTAL- COMPUTATIONAL MODELLING OF DAMAGE OF STEEL REINFORCED RUBBER COMPOSITE. In Materials Structure and Micromechanics of Fracture. Brno, CZ: Vutium, Brno University of Technology, 2001. p. 22 ( p.)ISBN: 80-214-1892- 3.
    Detail

  • 2000

    JANÍČEK, P., FLORIAN, Z., BURŠA, J., PŘIKRYL, K., PELLANT, K., FUIS, V., PÁSEK, M., KRŠEK, P. Biomechanika na Ústavu mechaniky těles FSI VUT v Brně. Inženýrská mechanika - Engineering Mechanics, 2000, vol. 7, no. 6, p. 449 ( p.)ISSN: 1210- 2717.
    Detail

*) Publications are generated once a 24 hours.