prof. RNDr.

Jaroslav Cihlář

CSc.

FME, IMSE DCP – professor

+420 54114 3383
cihlar@fme.vutbr.cz

Send BUT message

prof. RNDr. Jaroslav Cihlář, CSc.

Publications

  • 2019

    NOVOTNÁ, L.; KUČERA, L.; HAMPL, A.; DRDLÍK, D.; CIHLÁŘ, J.; CIHLÁŘ, J. Biphasic calcium phosphate scaffolds with controlled pore size distribution prepared by in-situ foaming. Materials Science and Engineering C-Materials for Biological Applications, 2019, vol. 95, no. 1, p. 363-370. ISSN: 0928-4931.
    Detail | WWW

    TORRES RODRÍGUEZ, J.; KALMÁR, J.; MENELAOU, M.; ČELKO, L.; DVOŘÁK, K.; CIHLÁŘ, J.; CIHLÁŘ, J.; KAISER, J.; GYŐRI, E.; VERES, P.; FÁBIÁN, I.; LÁZÁR, I. Heat treatment induced phase transformations in zirconia and yttriastabilized zirconia monolithic aerogels. JOURNAL OF SUPERCRITICAL FLUIDS, 2019, vol. 149, no. 1, p. 54-63. ISSN: 0896-8446.
    Detail | WWW

  • 2018

    DRDLÍK, D.; SLÁMA, M.; HADRABA, H.; DRDLÍKOVÁ, K.; CIHLÁŘ, J. Physical, mechanical, and biological properties of electrophoretically deposited lithium-doped calcium phosphates. Ceramics International, 2018, vol. 44, no. 3, p. 2884-2891. ISSN: 0272-8842.
    Detail | WWW

    DRDLÍK, D.; MORÁVEK, T.; RÁHEĽ, J.; STUPAVSKÁ, M.; CIHLÁŘ, J.; DRDLÍKOVÁ, K.; MACA, K. Electrophoretic deposition of plasma activated sub-micron alumina powder. Ceramics International, 2018, vol. 44, no. 8, p. 9787-9793. ISSN: 0272-8842.
    Detail | WWW

  • 2017

    ČÁSTKOVÁ, K.; MACA, K.; SEKANINOVÁ, J.; NEMČOVSKÝ, J.; CIHLÁŘ, J. Electrospinning and thermal treatment of yttria doped zirconia fibres. Ceramics International, 2017, vol. 43, no. 10, p. 7581-7587. ISSN: 0272-8842.
    Detail

    CIHLÁŘ, J.; VRBA, R.; ČÁSTKOVÁ, K.; CIHLÁŘ, J. Effect of transition metal on stability and activity of La-Ca-M-(Al)-O (M ¼ Co, Cr, Fe and Mn) perovskite oxides during partial oxidation of methane. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, vol. 42, no. 31, p. 19920-19934. ISSN: 1879-3487.
    Detail

  • 2016

    HADRABA, H.; CHLUP, Z.; DRDLÍK, D.; CIHLÁŘ, J. Micro-fibres containing composites prepared by EPD. Journal of the European Ceramic Society, 2016, vol. 36, no. 2, p. 365-371. ISSN: 0955-2219.
    Detail | WWW

    ČÁSTKOVÁ, K.; HADRABA, H.; MATOUŠEK, A.; ROUPCOVÁ, P.; CHLUP, Z.; NOVOTNÁ, L.; CIHLÁŘ, J. Synthesis of Ca,Y-zirconia/hydroxyapatite nanoparticles and composites. Journal of the European Ceramic Society, 2016, vol. 36, no. 12, p. 2903-2912. ISSN: 0955-2219.
    Detail

    ČÁSTKOVÁ, K.; MATOUŠEK, A.; BARTONÍČKOVÁ, E.; CIHLÁŘ, J.; VANÝSEK, P.; CIHLÁŘ, J. Sintering of Ce, Sm, and Pr Oxide Nanorods. Journal of the American Ceramic Society, 2016, vol. 99, no. 4, p. 1155-1163. ISSN: 0002-7820.
    Detail | WWW

    DRDLÍK, D.; SLÁMA, M.; HADRABA, H.; DRDLÍKOVÁ, K.; CIHLÁŘ, J. On the role of the indifferent electrolyte LiCl in electrophoretic deposition of hydroxyapatite from 2-propanol dispersions. Ceramics International, 2016, vol. 42, no. 15, p. 16529-16534. ISSN: 0272-8842.
    Detail | WWW

    NOVOTNÁ, L.; SEKANINOVÁ, J.; CIHLÁŘ, J. Zirconia / Alumina Composite Foams with Calcium Phosphate Coating. Materials Engineering - Materiálové inžinierstvo (online version), 2016, vol. 23, no. 1, p. 43-50. ISSN: 1338-6174.
    Detail

    KAŠPÁREK, V.; KOCSIS, K.; BERGER, T.; CIHLÁŘ, J.; DIWALD, O. Colloidal nanoparticle processing and water splitting catalyst preparation. Prague: University of Chemistry and Technology, 2016. p. 20-20.
    Detail

  • 2015

    KRÁLOVÁ, M.; KAŠPÁREK, V., SILLANPAA, M.; LEVCHUK, I.; CIHLÁŘ, J. Photocatalytic Decomposition of Metazachlor by Lanthanides- Doped Titanium Dioxide. Global Science and Technology Forum, 2015. p. 94-100.
    Detail

    KRÁLOVÁ, M.; LEVCHUK, I.; KAŠPÁREK, V.; SILANPÄÄ, M.; CIHLÁŘ, J. Influence of synthesis conditions on physical properties of lanthanide-doped titania for photocatalytic decomposition of metazachlor. CHINESE JOURNAL OF CATALYSIS, 2015, vol. 36, no. 10, p. 1679-1685. ISSN: 0253-9837.
    Detail

    HADRABA, H.; CHLUP, Z.; DRDLÍK, D.; CIHLÁŘ, J. Micro-fibres containing laminates prepared by EPD: kinetics of co-deposition. Key Engineering Materials (print), 2015, vol. 654, no. 1, p. 65-69. ISSN: 1013-9826.
    Detail | WWW

    KRÁLOVÁ, M.; DZIK, P.; KAŠPÁREK, V.; VESELÝ, M.; CIHLÁŘ, J. Cold-setting Inkjet Printed Titania Patterns Reinforced by Organosilicate Binder. MOLECULES, 2015, vol. 20, no. 9, p. 16582-16603. ISSN: 1420-3049.
    Detail | WWW | Full text in the Digital Library

    DRDLÍK, D.; SLÁMA, M.; HADRABA, H.; CIHLÁŘ, J. Hydroxyapatite/zirconia-microfibre composites with controlled microporosity and fracture properties prepared by electrophoretic deposition. Ceramics International, 2015, vol. 2015 (41), no. 9, p. 11202-11212. ISSN: 0272-8842.
    Detail | WWW

    SLÁMA, M.; CIHLÁŘ, J.; DRDLÍK, D. EFFECT OF DISPERSION CONDUCTIVITY ON THE PREPARATION OF Ca- PHOSPHATES, BY EPD. In MULTI- SCALE DESIGN OF ADVANCED MATERIALS. 2015. p. 85-92. ISBN: 978-80-214-5146- 9.
    Detail

    NOVOTNÁ, L.; CIHLÁŘ, J. Bioactive Zirconia- Based Porous Scaffolds For Potential Bone Graft Applications. In Multi-scale Design of Advanced Materials - Conference Proceedings. 2015. p. 93-99. ISBN: 978-80-214-5146- 9.
    Detail

    ČÁSTKOVÁ, K.; MACA, K.; CIHLÁŘ, J.; HUGHES, H.; MATOUŠEK, A.; TOFEL, P.; BAI, Y.; BUTTON, T. Chemical Synthesis, Sintering and Piezoelectric Properties of Ba0.85Ca0.15 Zr0.1Ti0.9O3 Lead-Free Ceramics. Journal of the American Ceramic Society, 2015, vol. 98, no. 8, p. 2373-2380. ISSN: 0002-7820.
    Detail

    CIHLÁŘ, J.; KAŠPÁREK, V.; KRÁLOVÁ, M.; ČÁSTKOVÁ, K. Biphasic anatase-brookite nanoparticles prepared by sol-gel complex synthesis and their photocatalytic activity in hydrogen production. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2015, vol. 40, no. 7, p. 2950-2962. ISSN: 0360-3199.
    Detail | WWW

  • 2014

    KRÁLOVÁ, M.; DZIK, P.; VESELÝ, M.; CIHLÁŘ, J. Preparation and characterization of doped titanium dioxide printed layers. CATALYSIS TODAY, 2014, vol. 230, no. 4, p. 188-196. ISSN: 0920-5861.
    Detail

    DRDLÍK, D.; BARTONÍČKOVÁ, E.; HADRABA, H.; CIHLÁŘ, J. Influence of anionic stabilization of alumina particles in 2-propanol medium on the electrophoretic deposition and mechanical properties of deposits. Journal of the European Ceramic Society, 2014, vol. 2014, no. 34, p. 3365-3371. ISSN: 0955-2219.
    Detail

    NOVÁK, V.; VANÝSEK, P.; CIHLÁŘ, J. New Electrochemistry for New Materials at CEITEC. In 15th International Conference on Advanced Batteries, Accumulators and Fuel Cells (ABAF 2014). ECS Transaction. 63. Pennington, NJ: The Electrochemical Society, 2014. p. 307-313. ISBN: 978-1-62332-230-4. ISSN: 1938-6737.
    Detail | WWW

    KAŠPÁREK, V.; KRÁLOVÁ, M.; ČÁSTKOVÁ, K.; CIHLÁŘ, J. Photocatalytic water splitting by Ln-doped TiO2 (Ln = Pr, Dy, Sm). Frontiers in Material and Life Science. Brno: CEITEC, 2014. p. 145-145. ISBN: 978-80-210-7159- 9.
    Detail

  • 2013

    HADRABA, H.; DRDLÍK, D.; CHLUP, Z.; MACA, K.; DLOUHÝ, I.; CIHLÁŘ, J. Layered ceramic composites via control of electrophoretic deposition kinetics. Journal of the European Ceramic Society, 2013, vol. 33, no. 12, p. 2305-2312. ISSN: 0955- 2219.
    Detail

    CIHLÁŘ, J. Jr.; BARTONÍČKOVÁ, E.; CIHLÁŘ, J. Low-temperature sol-gel synthesis of anatase nanoparticles modified by Au, Pd and Pt and activity of TiO2/Au, Pd, Pt photocatalysts in water splitting. JOURNAL OF SOL- GEL SCIENCE AND TECHNOLOGY, 2013, vol. 65, no. 3, p. 430-442. ISSN: 0928- 0707.
    Detail

    KAŠPÁREK, V.; CIHLÁŘ, J. Low- temperature Synthesis of Nanoparticles of Anatase. Conference Proceedings 5th International Conference NANOCON 2013. 1. Ostrava: Tanger, Ltd., 2013. p. 92-93. ISBN: 978-80-87294-44- 4.
    Detail

    MATOUŠEK, A.; KUKLETOVÁ, M.; CIHLÁŘ, J. Influence of Nanograin Size ZrO2 and Al2O3 Ceramics on Biological Response of Cells. Key Engineering Materials (print), 2013, vol. 587, no. 25, p. 132-137. ISSN: 1013- 9826.
    Detail

    CIHLÁŘ, J.; DRDLÍK, D.; CIHLÁŘOVÁ, Z.; HADRABA, H. Effect of acids and bases on electrophoretic deposition of alumina and zirconia particles in 2-propanol. Journal of the European Ceramic Society, 2013, vol. 33, no. 10, p. 1885-1892. ISSN: 0955-2219.
    Detail

  • 2012

    HVIZDOŠ, P.; PUCHÝ, V.; DRDLÍK, D.; CIHLÁŘ, J. Mechanical and Tribological Properties of Al2O3- ZrO2 Based Composites Prepared by EPD. Key Engineering Materials, 2012, vol. 507, no. 1, p. 191-195. ISSN: 1013- 9826.
    Detail

    DRDLÍK, D.; CIHLÁŘ, J.; CIHLÁŘOVÁ, Z.; HADRABA, H. Studium přípravy Al2O3/ ZrO2 laminátů z kyselých a zásaditých bezvodých isopropanolových suspenzí pomocí EPD. In Víceúrovňový design pokrokových materiálů 2012. Brno: Ústav fyziky materiálů AV ČR, v.v. i, 2012. p. 113-124. ISBN: 978-80-87434-06- 2.
    Detail

    HADRABA, H.; DRDLÍK, D.; CHLUP, Z.; MACA, K.; DLOUHÝ, I.; CIHLÁŘ, J. Laminated alumina/ zirconia ceramic composites prepared by electrophoretic deposition. Journal of the European Ceramic Society, 2012, vol. 32, no. 9, p. 2053-2056. ISSN: 0955- 2219.
    Detail

  • 2011

    DRDLÍK, D.; HADRABA, H.; CHLUP, Z.; CIHLÁŘ, J. Studium přípravy a tepelného zpracování keramických částicových kompozitů na bázi Al2O3 a w- SiC. In Víceúrovňový design pokrokových materiálů. Žižkova 22, Brno: Ústav fyziky materiálů AV ČR, v.v.i., 2011. p. 135-144. ISBN: 978-80-87434-04- 8.
    Detail

  • 2010

    BARTONÍČKOVÁ, E.; CIHLÁŘ, J. Synthesis and processing of InVO4. INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2010, vol. 24, no. 6- 7, p. 770-779. ISSN: 0217- 9792.
    Detail

    KUKLETOVÁ, M.; HALAČKOVÁ, Z.; HORKÝ, D.; MATOUŠEK, A.; GOJIŠOVÁ, E.; CIHLÁŘ, J. Comparsion of Dentine-Resin Interface in Total-Etch and Self- Etching Adhesives Using Electron Microscopy. Prague Medical Report, 2010, vol. 108, no. 4, p. 358-367. ISSN: 1214- 6994.
    Detail

    MATOUŠEK, A.; CIHLÁŘ, J.; KUKLETOVÁ, M. Testování dilatace osteoblastů na oxidických keramikách. In Víceúrovňový design pokrokových materiálů. Brno: Ústav fyziky materiálů AVČR, 2010. p. 85-92. ISBN: 978-80-87434-02- 4.
    Detail

  • 2009

    VOBĚRKOVÁ, S.; HERMANOVÁ, S.; OMELKOVÁ, J.; CIHLÁŘ, J.; GRYCOVÁ, A. PRELIMINARY STUDY OF POLYCAPROLACTONE MICROBIAL DEGRADATION. Book of Abstracts. Trnava: University of SS. Cyril and Methodius in Trnava, 2009. p. 43-43. ISBN: 978-80-8105-127- 2.
    Detail

    MATOUŠEK, A.; YOONIS, E.; KUKLETOVÁ, M.; CIHLÁŘ, J. SEM Studie Rozhraní dentin - pryskyřice u dočasných zubů. In Víceúrovňový design pokročilých materiálů 2009. Brno: Ústav fyziky materiálů AVČR, Žižková 22, 616 62 Brno, 2009. p. 75-82. ISBN: 978-80-254-6070- 2.
    Detail

  • 2008

    BARTONÍČKOVÁ, E.; CIHLÁŘ, J. Synthesis of doped lanthanum ferrite perovskites. Chemické listy, 2008, vol. 102, no. 15, p. 867-868. ISSN: 1213- 7103.
    Detail

    RICHTERA, L.; HERMANOVÁ, S; JANČÍK, V.; CIHLÁŘ, J. Crystal Structure of an Lanthanide Sandwich Complex (C5Me5)2NdCl2Li(OEt2) 2. Chemické listy, 2008, vol. 102, no. 15, p. 1263-1264. ISSN: 1213- 7103.
    Detail

  • 2007

    MACA, K.; CIHLÁŘ, J.; ČÁSTKOVÁ, K.; ZMEŠKAL, O.; HADRABA, H. Sintering of gadolinia- doped ceria prepared by mechanochemical synthesis. Journal of the European Ceramic Society, 2007, vol. 27, no. 13- 15, p. 4345-4348. ISSN: 0955- 2219.
    Detail

    PELEŠKA, J.; MERNA, J.; HERMANOVÁ, S.; CIHLÁŘ, J.; KUČERA, M. Kinetic Investigation of Nickel Diimine Catalyzed Hex-1-ene Polymerization: Effect of Co- catalyst. Bratislava: Slovak Academy of Sciences, 2007. p. 65-65.
    Detail

    PELEŠKA, J.; MERNA, J.; HERMANOVÁ, S.; CIHLÁŘ, J.; KUČERA, M. Kinetic Investigation of Nickel Diimine Catalyzed Hex-1-ene Polymerization: Effect of Co- catalyst. In Workshop Book. Bratislava: Slovak Academy of Sciences, 2007. p. 65-65. ISBN: 978-80-968433-4- 3.
    Detail

    ČÁSTKOVÁ, K., CIHLÁŘ, J., MACA, K. Phase composition and morphology of ZrO2 doped by Sc2O3/Y2O3 nanoparticles prepared by sol- gel method promoted by ultrasonic field. 2007.
    Detail

    BARTONÍČKOVÁ, E.; ČÁSTKOVÁ, K.; CIHLÁŘ, J. Synthesis of nanocrystalline bismuth oxide in microwave field. In Abstract Booklet of the International Conference Nano ´ 07. 2007. Brno: Vutium Brno, 2007. p. 80-80. ISBN: 978-80-214-3460- 8.
    Detail

    BARTONÍČKOVÁ, E.; ČÁSTKOVÁ, K.; CIHLÁŘ, J. Synthesis of nanocrystalline bismuth oxide. Acta Metallurgica Slovaca, 2007, vol. 13, no. 6, p. 252-255. ISSN: 1335- 1532.
    Detail

    BARTONÍČKOVÁ, E.; CIHLÁŘ, J. Chemical analysis of advanced materials. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2007, vol. 2007, no. 321, p. 15-20. ISSN: 1429- 6055.
    Detail

  • 2006

    PELEŠKA, J.; MERNA, J.; HERMANOVÁ, S.; CIHLÁŘ, J.; KUČERA, M. Kinetics of Propene Polymerization Initiated by Nickel- Diimine Complex Activated by Organoaluminium Compounds. In Polymers for Advanced Technologies. Pune, India: National Chemical Laboratory, India, 2006. p. 5 ( p.)
    Detail

    HERMANOVÁ, S.; CIHLÁŘ, J.; KUČERA, M.; ŠEVČÍK, J. Phenoxy-imine Catalyst for Di(olefin) Polymerization. In POLYMERY 2006. 1. Třešť: Ústav makromolekulární chemie AVČR, 2006. p. P20 ( p.)ISBN: 80-85009-54- 4.
    Detail

    HERMANOVÁ, S.; CIHLÁŘ, J.; KUČERA, M.; MERNA, J. Macromonomers of Polyethylene. In MACRO- 2006. 1. Pune: National Chemical Laboratory, 2006. p. 1-5.
    Detail

    CIHLÁŘ, J.; TRUNEC, M. Vodivé keramické materiály pro elektrochemické a energetické aplikace. Sklář a keramik, 2006, vol. 56, no. 12, p. 327-330. ISSN: 0037- 637X.
    Detail

    CIHLÁŘ, J.; DEL FAVERO, D.; CIHLÁŘ, J.; BUCHAL, A.; VAN HERLE, J. Synthesis, structure and oxygen thermally programmed desorption spectra of La1-xCaxAlyFe1-yO3- d perovskites. Journal of the European Ceramic Society, 2006, vol. 26, no. 14, p. 2999-3004. ISSN: 0955- 2219.
    Detail | WWW

    TRUNEC, M.; CIHLÁŘ, J.; DIETHELM, S.; VAN HERLE, J. Tubular La0.7Ca0.3Fe0.85Co0.15O3-d Perovskite Membranes, Part II: Performance and Stability. Journal of the American Ceramic Society, 2006, vol. 89, no. 3, p. 955-959. ISSN: 0002- 7820.
    Detail

  • 2005

    Merna, J., Cihlář, J., Kučera, M., Deffieux, A., Cramail, H. Polymerization of hex-1- ene initiated by diimine complexes of nickel and palladium. European Polymer Journal, 2005, vol. 2005, no. 41, p. 303-312. ISSN: 0014- 3057.
    Detail

    HERMANOVÁ, S.; CIHLÁŘ, J.; MERNA, J.; KUČERA, M. Titanium complex having two phenoxy- imine chelate ligands for living ethylene polymerization. Chemické listy, 2005, vol. 99, no. Symposia, p. 450-451. ISSN: 0009- 2770.
    Detail

    MERNA, J., CIHLÁŘ, J., KUČERA, M., HERMANOVÁ, S. Living polymerization of olefins initiated by nickel catalysts. Chemické listy, 2005, vol. 99, no. symposia, p. 373-376. ISSN: 0009- 2770.
    Detail

    ČÁSTKOVÁ, K.; CIHLÁŘ, J. Aplikace sol- gel metod v keramické technologii. Keramický zpravodaj, 2005, vol. 21, no. 3, p. 7-12. ISSN: 1210- 2520.
    Detail

  • 2004

    ŠEDOVÁ, M.; BUCHNÍČEK, M.; CIHLÁŘ, J.; ZMEŠKAL, O. Studium iontové vodivosti v oxidu ceričitém. Chemické listy. sborník. Ostrava: ČSCH, 2004. p. 720 ( p.)ISSN: 0009- 2770.
    Detail

    HADRABA, H., MACA, K., CIHLÁŘ, J. Electrophoretic deposition of alumina and Zirconia II. Two component systems. Ceramics International, 2004, vol. 30, no. 6, p. 853 ( p.)ISSN: 0272- 8842.
    Detail

    MACA, K., HADRABA, H., CIHLÁŘ, J. Electrophoretic deposition of alumina and zirconia I. Single- component system. Ceramics International, 2004, vol. 30, no. 6, p. 843 ( p.)ISSN: 0272- 8842.
    Detail

    ČÁSTKOVÁ, K., HADRABA, H., CIHLÁŘ, J. Hydrothermal ageing of tetragonal zirconia ceramics. Ceramics- Silikáty, 2004, vol. 48, no. 3, p. 85 ( p.)ISSN: 0862- 5468.
    Detail

  • 2003

    CIHLÁŘ, J., HADRABA, H., MACA, K., ČÁSTKOVÁ, K. MECHANOCHEMICAL SYNTHESIS OF GADOLINIA DOPED CERIA POWDERS. In Grain Boundary Engineering in Electronic Materials. British Ceramics Proceedings. London: Maney, 2003. p. 53 ( p.)ISBN: 1-902653-77- 7. ISSN: 0268- 4373.
    Detail

    HADRABA, H., MACA, K., CIHLÁŘ, J. Electrophoretic deposition of Alumina and Zirconia based Ceramics. In School of Ceramics- Fifth students meeting. Novi Sad, Serbia and Montenegro: 2003. p. 66 ( p.)ISBN: 86-80995-46- 0.
    Detail

    ČÁSTKOVÁ, K., HADRABA, H., CIHLÁŘ, J. Hydrothermal corrosion of zirconia ceramics. In School of ceramics: V Students Meeting, Book of Extend Abstracts. Novi Sad: Faculty of Technology, University of Novi Sad, 2003. p. 50 ( p.)ISBN: 86-80995-46- 0.
    Detail

    HADRABA, H., MACA, K., CIHLÁŘ, J. Electrophoretic Deposition of Alumina and Zirconia Based Ceramics. In School of Ceramics. Novi Sad: 2003. p. 66 ( p.)ISBN: 86-80995-46- 0.
    Detail

    ČÁSTKOVÁ, K.; HADRABA, H.; CIHLÁŘ, J. Hydrothermal Synthesis of Ceria Doped by Rare Earth Elements. In Abstract Book. Beograd: Jožef Stefan Institute, 2003. p. 43 ( p.)
    Detail

  • 2002

    ČÁSTKOVÁ, K., CIHLÁŘ, J. Syntéza nanokrystalického oxidu ceričitého dopovaného Sm, Gd a Y v přítomnosti ultrazvuku a za hydrotermálních podmínek. In Proceedings of the National Conference Nano 02. Ostrava: VUT v Brně, FSI, 2002. p. 257 ( p.)ISBN: 80-7329-027- 8.
    Detail

    CIHLÁŘ, J.; ČÁSTKOVÁ, K. Direct synthesis of nanocrystalline hydroxyapatite by hydrothermal hydrolysis of alkylphosphates. Monatshefte fuer Chemie, 2002, vol. 133, no. 6, p. 761 ( p.)ISSN: 0026- 9247.
    Detail

    CIHLÁŘ, J. Direct synthesis of nanocrystalline hydroxyapatite by hydrothermal hydrolysis of alkylphosphates. 2002.
    Detail

    TRUNEC, M.; CIHLÁŘ, J. Effect of debinding conditions on thermal removal of multicomponent binder from injection moulded ceramics. In SHAPING II Proceedings of the International Conference on Shaping of Advanced Ceramics. Mol, Belgie: Flemish Institute for Technological Research (VITO), 2002. p. 327 ( p.)ISBN: 90-5857-004- 5.
    Detail

    TRUNEC, M.; CIHLÁŘ, J. Thermal removal of multicomponent binder from ceramic injection mouldings. Journal of the European Ceramic Society, 2002, vol. 22, no. 13, p. 2231-2241. ISSN: 0955- 2219.
    Detail

    MACA, K., TRUNEC, M., CIHLÁŘ, J. Injection Moulding and Sintering of Ceria Ceramics. Ceramics International, 2002, vol. 28, no. 3, p. 337 ( p.)ISSN: 0272- 8842.
    Detail

    ZMEŠKAL, O.; CIHLÁŘ, J.; BUCHNÍČEK, M.; SEDLÁK, O. Impedanční spektroskopie tuhých iontových elektrolytů. Chemical Papers, 2002, vol. 96, no. 6, p. 532 ( p.)ISSN: 0366- 6352.
    Detail

    HERMANOVÁ, S.; CIHLÁŘ, J.; MERNA, J.; KUČERA, M.; KRAJČOVÁ, P. Synthesis of Macromonomers via Coordination Polymerization of Olefins. Chemické listy, 2002, vol. 96, no. Symposia, p. 243-244. ISSN: 0009- 2770.
    Detail

    ZMEŠKAL, O.; CIHLÁŘ, J.; NEŽÁDAL, M.; BUCHNÍČEK, M. Impedance spectroscopy of ceramic materials. Chemické listy, 2002, vol. S, no. 96, p. S54 ( p.)ISSN: 0009- 2770.
    Detail

  • 2001

    TRUNEC, M.; CIHLÁŘ, J. Effect of Activated Carbon Bed on Binder Removal from Ceramic Injection Moldings. Journal of the American Ceramic Society, 2001, vol. 84, no. 3, p. 675 ( p.)ISSN: 0002- 7820.
    Detail

  • 2000

    JEŽ, M., ČÁSTKOVÁ, K., CIHLÁŘ, J. ULTRASONIC DEPOSITION OF HYDROXYAPATITE COATINGS. In PEDAGOGICKO-VĚDECKÁ KONFERENCE U PŘÍLEŽITOSTI 100. VÝROČÍ ZALOŽENÍ FAKULTY STROJNÍHO INŽENÝRSTVÍ, II. Sborník příspěvků doktorandů. II. Sborník příspěvků doktorandů. Brno: VUT FSI v Brně, 2000. p. 115 ( p.)ISBN: 80-214-1764- 1.
    Detail

    JEŽ, M., ČÁSTKOVÁ, K., CIHLÁŘ, J. PREPARATION OF BIOCERAMIC COATINGS BY ULTRASONIC SPRAY DEPOSITION. In Junior Euromat 2000. Lausanne, Switzerland: Deutche Gesellschaft für Materialkunde e. V.(DGM), 2000. p. 428 ( p.)
    Detail

    MACA, K., HADRABA, H., CIHLÁŘ, J. Study of Sintering of Oxide Ceramics at Constant Rate of Heating and by means of Rate- Controlled Sintering Method. In Ceramics-Processing, Reliability and Wear. Weinheim: WILEY-VCH Verlag Gmbh, Weinheim, 2000. p. 161 ( p.)ISBN: 3-527-30194- 1.
    Detail

    TRUNEC, M.; DOBŠÁK, P.; CIHLÁŘ, J. Effect of powder treatment on injection moulded zirconia ceramics. Journal of the European Ceramic Society, 2000, vol. 20, no. 7, p. 859 ( p.)ISSN: 0955- 2219.
    Detail

  • 1999

    JEŽ, M.; ČÁSTKOVÁ, K.; CIHLÁŘ, J. STRUKTURA A VLASTNOSTI KERAMICKÝCH MATERIÁLŮ S POVRCHOVÝMI VRSTVAMI. In Materiálové vědy na prahu 3. milénia. Vysoké učení technické, fakulta strojního inženýrství, Technická 2, 61669 Brno: Vysoké učení technické,fakulta strojního inženýrství, Ústav materiálového inženýrství Fr. Píška, 1999. p. 338 ( p.)ISBN: 80-214-1376- X.
    Detail

    MACA, K., CIHLÁŘ, J. Interaction between alumina ceramic cores and reactive metals. In 47th Annual Technical Meeting. Dallas: ICI, 1999. p. 16. 1 ( p.)
    Detail

  • 1998

    TRUNEC, M.; CIHLÁŘ, J. Tvarování keramických suspenzí injekčním vstřikováním. Sklář a keramik, 1998, vol. 48, no. 3, p. 49 ( p.)ISSN: 0037- 637X.
    Detail

    MACA, K., HADRABA, H., CIHLÁŘ, J. Study of Sintering of Ceramics by means of High- Temperature Dilatometry. Ceramics- Silikáty, 1998, vol. 42, no. 4, p. 151 ( p.)ISSN: 0862- 5468.
    Detail

  • 1997

    TRUNEC, M.; CIHLÁŘ, J. Thermal Debinding of Injection Moulded Ceramics. Journal of the European Ceramic Society, 1997, vol. 17, no. 2- 3, p. 203 ( p.)ISSN: 0955- 2219.
    Detail

    TRUNEC, M.; CIHLÁŘ, J. Removal of Thermoplastic Binders from Ceramic Green Bodies. Ceramics- Silikáty, 1997, vol. 41, no. 2, p. 67 ( p.)ISSN: 0862- 5468.
    Detail

    MACA, K., CIHLÁŘ, J. Study of High-temperature Processes at Interphase Boundary of Chromium (Titanium) and Alumina. Ceramics- Silikáty, 1997, vol. 41, no. 1, p. 13 ( p.)ISSN: 0862- 5468.
    Detail

  • 1995

    TRUNEC, M., CIHLÁŘ, J. Injection Moulding of Alumina Bioceramics. In Materials in Clinical Applications. Florencie, Itálie: Techna Srl., 1995. p. 99 ( p.)ISBN: 88-86538- 0.
    Detail

    CIHLÁŘ, J.; MACA, K.; MARQUIS, P. Influence of Pressure on the Interaction between Alumina- Mullite Shell Moulds and Molten Nickel Alloys. Ceramics- Silikáty, 1995, vol. 39, no. 4, p. 145-154. ISSN: 0862- 5468.
    Detail

    MACA, K., CIHLÁŘ, J. Alumina Shell Moulds and Cores for Directional Solidification of Ni- alloys. In Alumina Shell Moulds and Cores for Directional Solidificatio. Florencie, Itálie: International Ceramics Federation, 1995. p. 2839 ( p.)ISBN: 88-86538- 0.
    Detail

  • 1994

    MACA, K., CIHLÁŘ, J. Mechanism of Interaction between Single Crystal Alumina and Molten Ni- alloys. In Junior Euromat 94. Lausanne, Švýcarsko: The Federation of European Materials Societies, 1994. p. 9 ( p.)
    Detail

*) Publications are generated once a 24 hours.