prof. Ing.

Ivo Dlouhý

CSc.

FME, IMSE DMDM – Professor

+420 54114 3171
dlouhy@fme.vutbr.cz

Send BUT message

prof. Ing. Ivo Dlouhý, CSc.

Publications

  • 2023

    KOTRECHKO, S.; KOZÁK, V.; ZATSARNA, O.; ZIMINA, G.; STETSENKO, N.; DLOUHÝ, I. Micromechanical aspects of the effect of temperature and local plastic strain magnitude on the fracture toughness of ferrite steels. In MSMF 10 Proceedings. Procedia Structural Integrity. Amsterdam: Elsevier, 2023. p. 228-233. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    PAPEŽ, P.; ZELENÝ, M.; FRIÁK, M.; DLOUHÝ, I. The effect of spin-polarization, atomic ordering and charge transfer on the stability of CoCrNi medium entropy alloy. MATERIALS CHEMISTRY AND PHYSICS, 2023, vol. 304, no. -, p. 127783 (- p.)ISSN: 0254-0584.
    Detail | WWW

    KIANICOVÁ, M.; DLOUHÝ, I.; ŠANDERA, P.; HORNÍKOVÁ, J.; POKLUDA, J. Dynamic Fracture Characteristics of High-Strength Steel. Defect and Diffusion Forum, 2023, vol. 422, no. 1, p. 45-49. ISSN: 1012-0386.
    Detail | WWW

  • 2022

    MORAVČÍK, I.; ZELENÝ, M.; DLOUHÝ, A.; HADRABA, H.; MORAVČÍKOVÁ DE ALMEIDA GOUVEA, L.; PAPEŽ, P.; FIKAR, O.; DLOUHÝ, I.; RAABE, D.; LI, Z. Impact of interstitial elements on the stacking fault energy of an equiatomic CoCrNi medium entropy alloy: theory and experiments. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2022, vol. 23, no. 1, p. 376-392. ISSN: 1468-6996.
    Detail | WWW | Full text in the Digital Library

  • 2021

    MORAVČÍK, I.; PEIGHAMBARDOUST, N.; MOTALLEBZADEH, A.; MORAVČÍKOVA DE ALMEIDA GOUVÊA, L.; LIU, C.; PRABHAKAR, J.; DLOUHÝ, I.; LI, Z. Interstitial nitrogen enhances corrosion resistance of an equiatomic CoCrNi medium-entropy alloy in sulfuric acid solution. MATERIALS CHARACTERIZATION, 2021, vol. 172, no. 110869, p. 1-10. ISSN: 1044-5803.
    Detail | WWW

    POKLUDA, J.; DLOUHÝ, I.; KIANICOVÁ, M.; ČUPERA, J.; HORNÍKOVÁ, J.; ŠANDERA, P. Temperature Dependence of Fracture Characteristics ofVariously Heat-Treated Grades of Ultra-High-Strength Steel:Experimental and Modelling. Materials, 2021, vol. 14, no. 19, p. 1-28. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    MORAVČÍKOVÁ DE ALMEIDA GOUVEA, L.; MORAVČÍK, I.; POUCHLÝ, V.; KOVÁČOVÁ, Z.; KITZMANTEL, M.; NEUBAUER, E.; DLOUHÝ, I. Tailoring a Refractory High Entropy Alloy by Powder Metallurgy Process Optimization. Materials, 2021, vol. 14, no. 19, p. 1-21. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    MORAVČÍKOVÁ DE ALMEIDA GOUVÊA, L.; KOVACOVA, Z.; KITZMANTEL, M.; NEUBAUER, E.; JAN, V.; DLOUHÝ, I. Influence of Hot Pressing Sintering Temperature on the Properties of Low-Density Al0.5NbTa0.8Ti1.5V0.2Zr Refractory High-Entropy Alloy. Materials Science Forum, 2021, vol. 1016, no. 1016, p. 940-945. ISSN: 1662-9752.
    Detail | WWW

  • 2020

    MORAVČÍK, I.; HADRABA, H.; LI, L.; DLOUHÝ, I.; RAABE, D.; LI, Z. Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility. SCRIPTA MATERIALIA, 2020, vol. 178, no. 178, p. 391-397. ISSN: 1359-6462.
    Detail | WWW

    MORAVČÍK, I.; GAMANOV, Š.; MORAVČÍKOVA DE ALMEIDA GOUVÊA, L.; KOVACOVA, Z.; KITZMANTECH, M.; NEUBAUER, E.; DLOUHÝ, I. Influence of Ti on the Tensile Properties of the High-Strength Powder Metallurgy High Entropy Alloys. Materials, 2020, vol. 13, no. 3, p. 0-18. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    MORAVČÍK, I.; HORNÍK, V.; MINÁRIK, P.; LI, L.; MICHAELA, J.; RAABE, D.; LI, Z. Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy. Materials Science and Engineering A, 2020, vol. 781, no. 139242, p. 1-14. ISSN: 0921-5093.
    Detail | WWW

    DLOUHÝ, I. GLOBE - Glasses, ceramics and composites for sustainable industries and a low carbon future. 2020.
    Detail

    ŠANDERA, P.; HORNÍKOVÁ, J.; KIANICOVÁ, M.; DLOUHÝ, I.; POKLUDA, J. Determination of Ramberg-Osgood approximation for estimation of low- temperature fracture toughness. In Fracture and Damage Mechanics. AIP Conference Proceedings. AIP Publishing LLC., 2020. p. 020024-1 (020024-6 p.)ISBN: 978-0-7354-4045-6. ISSN: 1551-7616.
    Detail

    MORAVČÍK, I.; KUBÍČEK, A.; MORAVČÍKOVA DE ALMEIDA GOUVÊA, L.; ADAM, O.; KAŇA, V.; POUCHLÝ, V.; ZÁDĚRA, A.; DLOUHÝ, I. The Origins of High-Entropy Alloy Contamination Induced by Mechanical Alloying and Sintering. Metals, 2020, vol. 10, no. 9, p. 1-15. ISSN: 2075-4701.
    Detail | WWW | Full text in the Digital Library

    RUDIANTO, H.; YANG, S.; KIM, Y.; DLOUHÝ, I.; CAESARENDRA, W. Effects of solid lubricants on properties of Al-Si-SiC composite powder produced by gas atomization technique. JOURNAL OF METALS MATERIALS AND MINERALS, 2020, vol. 30, no. 3, p. 55-63. ISSN: 0857-6149.
    Detail | WWW

    MORAVČÍKOVA DE ALMEIDA GOUVÊA, L.; MORAVČÍK, I.; OMASTA, M.; VESELY, J.; ČÍŽEK, J.; MINÁRIK, P.; ČUPERA, J.; ZÁDĚRA, A.; JAN, V.; DLOUHÝ, I. High-strength Al0.2Co1.5CrFeNi1.5Ti high-entropy alloy produced by powder metallurgy and casting: A comparison of microstructures, mechanical and tribological properties. MATERIALS CHARACTERIZATION, 2020, vol. 159, no. 110046, p. 1-16. ISSN: 1044-5803.
    Detail | WWW

  • 2019

    MORAVČÍK, I.; JAN, Č.; DE ALMEIDA GOUVÊA, L.; ČUPERA, J.; GUBÁN, I.; DLOUHÝ, I. Nitrogen Interstitial Alloying of CoCrFeMnNi High Entropy Alloy through Reactive Powder Milling. ENTROPY, 2019, vol. 21, no. 4, p. 1-7. ISSN: 1099-4300.
    Detail | WWW | Full text in the Digital Library

    MORAVČÍKOVA DE ALMEIDA GOUVÊA, L.; KOVACOVA, Z.; JAN, V.; SPOTZ, Z.; KITZMANTEL, M.; NEUBAUER, E.; DLOUHÝ, I. Effect of sintering temperature on the microstructure and properties of powder metallurgy Hf0.5Nb0.5Ta0.5Ti1.5Zr refractory high-entropy alloy. In Metal 2019. 1st edition, 2019. Brno: Tanger Ltd., 2019. p. 1486-1491. ISBN: 978-80-87294-92-5.
    Detail

    JURČI, P.; ĎURICA, J.; DLOUHÝ, I.; HORNÍK, J.; PLANIETA, R.; KRALOVIČ, D. Application of-140 degrees C Sub-Zero Treatment For Cr-V Ledeburitic Steel Service Performance Improvement. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, vol. 50A, no. 5, p. 2413-2434. ISSN: 1073-5623.
    Detail | WWW

    BERTOLLA, L.; DLOUHÝ, I.; BARTONÍČKOVÁ, E.; TOUŠEK, J.; NOVÁČEK, J.; MÁCOVÁ, P. Deconstruction of microfibrillated cellulose into nanocrystalline cellulose rods and mesogenic phase formation in concentrated low-modulus sodium silicate solutions. CELLULOSE, 2019, vol. 26, no. 7, p. 4325-4344. ISSN: 0969-0239.
    Detail | WWW

    HAVLÍK, P.; KOUŘIL, J.; VÁLKA, L.; DLOUHÝ, I.; CHALUPNÍK, P. The production optimization of steel impellers by using of the electron beam welding method. In Technological Forum 2019 - Book of Proceeding. 1. Jaroměř: TISK AS, s.r.o., 2019. p. 235-241. ISBN: 978-80-87583-30-2.
    Detail

    F. Siska, J. Cizek, H. Seiner, I. Dlouhy. Numerical analysis of geometrically induced hardening in planar architectured materials. COMPOSITE STRUCTURES, 2019, vol. 233, no. 111633, p. 1-10. ISSN: 1879-1085.
    Detail | WWW

    DLOUHÝ, I.; ŘEHOŘEK, L.; SEINER, H.; ČÍŽEK, J.; ŠIŠKA, F. Architectured Multi-Metallic Structures Prepared by Cold Dynamic Spray Deposition. Key Engineering Materials (print), 2019, vol. 810, no. 9, p. 107-112. ISSN: 1013-9826.
    Detail | WWW

  • 2018

    HANUSOVÁ, P.; DLOUHÝ, I. MECHANICAL ALLOYING AS A WAY TO PRODUCE ALUMINUM MATRIX COMPOSITE WITH TiB2 PARTICLES AS A REINFORCEMENT. In 26th International Conference on Metallurgy and Materials. Ostrava: Tanger Ltd., 2018. p. 1726-1731. ISBN: 9788087294796.
    Detail

    DE ALMEIDA GOUVÊA, L.; JAN, V.; DLOUHÝ, I. Preparation and Characterization of CoCrNi-Mo Metal Matrix Composite by Powder Metallurgy. In METAL 2018. 1st Edition, 2018. Brno: Tanger Ltd., 2018. p. 1545-1550. ISBN: 978-80-87294-84-0.
    Detail

    HAVLÍK, P.; ČUPERA, J.; DLOUHÝ, I. Influence of the process parameters of electron beam to the weldability of aluminum and titanium alloys. In METAL 2017 26th International Conference on Metallurgy and Materials - CONFERENCE PROCEEDINGS. 1. Keltickova 62, 710 00 Ostrava, Czech Republic, EU: TANGER Ltd., 2018. p. 1543-1548. ISBN: 978-80-87294-79-6.
    Detail

    MATLÁK, J.; DLOUHÝ, I. Properties of electron beam hardened layers made by different beam deflection. Manufacturing TECHNOLOGY, 2018, vol. 18, no. 2, p. 279-284. ISSN: 1213-2489.
    Detail | WWW

    MORAVČÍK, I.; DE ALMEIDA GOUVÊA, L.; ČUPERA, J.; DLOUHÝ, I. Preparation and properties of medium entropy CoCrNi/boride metal matrix composite. JOURNAL OF ALLOYS AND COMPOUNDS, 2018, vol. 748, no. 748, p. 979-988. ISSN: 1873-4669.
    Detail | WWW

    KRAJŇÁKOVÁ, P.; DE ALMEIDA GOUVÊA, L.; ČUPERA, J.; JAN, V.; DLOUHÝ, I.; SPOTZ, Z. Influence of multiple electron-beam remeltings on the characteristics of HVOF and CGDS sprayed conicraly coatings. Materiali in tehnologije, 2018, vol. 52, no. 3, p. 289-293. ISSN: 1580-2949.
    Detail

    ŘEHOŘEK, L.; DLOUHÝ, I.; JAN, V. Cold gas dynamic spray deposition as additive manufacturing of architectured materials. Materiálové inžinierstvo, 2018, vol. 24, no. 4, p. 115-123. ISSN: 1335-0803.
    Detail | WWW

    MORAVČÍK, I.; DE ALMEIDA GOUVÊA, L.; HORNÍK, V.; KOVACOVA, Z.; KITZMANTEL, E.; NEUBAUER, E.; DLOUHÝ, I. Synergic strengthening by oxide and coherent precipitate dispersions in high-entropy alloy prepared by powder metallurgy. SCRIPTA MATERIALIA, 2018, vol. 157, no. 1, p. 24-29. ISSN: 1359-6462.
    Detail | WWW

    BERTOLLA, L.; CHLUP, Z.; TATARKO, P.; HANZEL, O.; ŠEVEČEK, O.; ROUPCOVÁ, P.; DLOUHÝ, I. Preparation and characterization of novel environmentally friendly Al2O3/SiO2/CaO ceramic foams. Ceramics International, 2018, vol. 44, no. 1, p. 19063-19069. ISSN: 0272-8842.
    Detail | WWW

    MORAVČÍK, I.; KOVÁČOVÁ, Z.; KITZMANTECH, M.; NEUBAUER, E.; DLOUHÝ, I. Mechanical and Microstructural Characterization of Powder Medium Entropy Alloy. Materials Science Forum, 2018, vol. 941, no. 1, p. 976-981. ISSN: 0255-5476.
    Detail | WWW

    DE ALMEIDA GOUVÊA, L.; MORAVČÍK, I.; ČÍŽEK, J.; KRAJŇÁKOVÁ, P.; JAN, V.; DLOUHÝ, I. Characterization of Powder Metallurgy High-Entropy Alloys Prepared by Spark Plasma Sintering. Materials Science Forum, 2018, vol. 941, no. 1, p. 1053-1058. ISSN: 0255-5476.
    Detail | WWW

    HAVLÍK, P.; ČUPERA, J.; KOUŘIL, J.; DLOUHÝ, I.; FORET, R. Optimization of EB keyhole welding of aluminum to titanium alloy. In Elektrotechnica & Elektronica. Elektrotechnica & Elektronica. 108 "Rakovski" str., Sofia 1000, Bulgaria: The Union of Electronics, Electrical Engineering and Telecommunications /CEEC/, Bulgaria, 2018. p. 125-131. ISSN: 0861-4717.
    Detail

    MATLÁK, J.; DLOUHÝ, I. Surface property control by electron beam deflection during hardening. Materiálové inžinierstvo, 2018, vol. 24, no. 4, p. 124-130. ISSN: 1335-0803.
    Detail | WWW

    VÁLKA, L.; DLOUHÝ, I. Fracture toughness transition of ferritic-pearlitic steel at static and dynamic loading evaluated by master curve concept. Materiálové inžinierstvo, 2018, vol. 24, no. 4, p. 101-107. ISSN: 1335-0803.
    Detail | WWW

    HAVLÍK, P.; KOUŘIL, J.; DLOUHÝ, I. Improvement the root stability of thick welds during electron beam welding. In METAL 2018 - Conference Proceedings. 1. Keltickova 62, 710 00 Ostrava, Czech Republic, EU: Tanger Ltd., 2018. p. 700-705. ISBN: 978-80-87294-84-0.
    Detail

    MORAVČÍK, I.; ČÍŽEK, J.; DLOUHÝ, I. MECHANICAL PROPERTIES OF HIGH ENTROPY ALLOY TiC REINFORCED IN-SITU COMPOSITE. In 27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018). Brno: TANGER Ltd., 2018. p. 1635-1640. ISBN: 978-80-87294-84-0.
    Detail | WWW

    HASEGAWA, M.; SAKURAI, K.; DLOUHÝ, I.; STRATIL, L.; FUKUTOMI, H. Fracture toughness of a lamellar orientation-controlled TiAl-based alloy processed by either one-step or two-step compression at high temperature. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROST, 2018, vol. 721, no. 4, p. 303-310. ISSN: 1873-4936.
    Detail | WWW

    MASINI, A.; ŠIŠKA, F.; ŠEVEČEK, O.; CHLUP, Z.; DLOUHÝ, I. Elastic properties of multi-layered ceramic systems for SOCs. International Journal of Applied Ceramic Technology, 2018, vol. 2017, no. 1, p. 370-379. ISSN: 1744-7402.
    Detail | WWW

  • 2017

    ZELENÝ, M.; DLOUHÝ, I. Magnetism of coherent Co and Ni thin films on Cu(111) and Au(111) substrates: An ab initio study. J. Magnetism Magn. Mat., 2017, vol. 424, no. -, p. 394-401. ISSN: 0304-8853.
    Detail | WWW

    HANUSOVÁ, P.; DLOUHÝ, I. Reactions in Ternary System Al-B2O3-C during Mechanical Alloying. Materials Science Forum, 2017, no. 891, p. 522-525. ISSN: 0255-5476.
    Detail

    MORAVČÍK, I.; ČÍŽEK, J.; ZAPLETAL, J.; KOVACOVA, Z.; VESELY, J.; MINÁRIK, P.; KITZMANTECH, M.; NEUBAUER, E.; DLOUHÝ, I. Microstructure and mechanical properties of Ni1,5Co1,5CrFeTi0, 5 high entropy alloy fabricated by mechanical alloying and spark plasma sintering. MATERIALS & DESIGN, 2017, vol. 119, no. 1, p. 141-151. ISSN: 1873-4197.
    Detail | WWW

    KRAJŇÁKOVÁ, P.; DLOUHÝ, I.; ČÍŽEK, J.; ČUPERA, J.; SHVAB, R. Effect of Double Electron beam Remelting on Microstructure of HVOF and CGDS Bond Coat. In Metallography XVI. Materials Science Forum. Zurich, Switzerland: Trans tech Publications Ltd, 2017. p. 574-578. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
    Detail

    MORAVČÍK, I.; ČÍŽEK, J.; KOVACOVA, Z.; HORNÍK, V.; KUBĚNA, I.; KITZMANTEL, E.; NEJEZCHLEBOVÁ, J.; NEUBAUER, E.; DLOUHÝ, I. Mechanical and Microstructural Characterization of Powder Metallurgy CoCrNi Medium Entropy Alloy. Materials Science and Engineering A, 2017, vol. 2017, no. 701, p. 370-380. ISSN: 0921-5093.
    Detail | WWW

    KRAJŇÁKOVÁ, P.; ČUPERA, J.; JAN, V.; DLOUHÝ, I. STUDY OF THE ELECTRON BEAM REMELTING OF A CGDS DEPOSITED CONICRALY LAYERS. In METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS. KELTICKOVA 62, SLEZSKA, OSTRAVA 710 00, CZECH REPUBLIC: TANGER LTD, 2017. p. 1333-1337. ISBN: 978-80-87294-79-6.
    Detail

    MATLÁK, J.; FORET, R.; DLOUHÝ, I. Influence of the beam deflection od properties of the electron beam hardened layer. In International Scientific Journal "Material Science" "Nonequilibrium Phase Transformations". Materials Science. Non-Equilibrium Phase Transformations. 2017. p. 194-197. ISSN: 2367-749X.
    Detail

    MATLÁK, J.; DLOUHÝ, I. Properties of Electron Beam Hardened Layers Made By Different Beam Deflection. In Proceedings of Abstracts "26th National Conference on Heat Treatment". 2017. p. 251-259. ISBN: 978-80-907043-0-5.
    Detail

    MATĚJKOVÁ, M.; ČÍŽEK, J.; MUŠÁLEK, R.; DLOUHÝ, I. PROPERTIES OF HYDROXYAPATITE SURFACE DEPOSITED BY PLASMA SPRAY TECHNOLOGIES. In Conference Proceedings 26th International Conference on Metallurgy and Materials. 1st Edition. Ostrava: TANGER Ltd. Ostrava, 2017. p. 1377-1381. ISBN: 978-80-87294-79-6.
    Detail

    RUDIANTO, H.; DLOUHÝ, I.; ŠOUKAL, F. Effect of Ultrasonication Dispersion Technique on Sintering Properties of CNT Reinforced Al-Zn-Mg-Cu Powder. ARCHIVES OF METALLURGY AND MATERIALS, 2017, vol. 62, no. 2, p. 1131-1135. ISSN: 1733-3490.
    Detail | WWW | Full text in the Digital Library

    BOCCACCINI, D.; ŠEVEČEK, O.; FRANDSEN, H.; DLOUHÝ, I.; MOLIN, S.; HJELM, J.; CANNIO, M.; HENDRIKSEN, P. Determination of the bonding strength in solid oxide fuel cells’ interfaces by Schwickerath crack initiation test. Journal of the European Ceramic Society, 2017, vol. 2017, no. 37, p. 3565-3578. ISSN: 0955-2219.
    Detail

  • 2016

    HALASOVÁ, M.; ČERNÝ, M.; CHLUP, Z.; STRACHOTA, A.; DLOUHÝ, I. Fracture response of SiOC-based composites on dynamic loading. JOURNAL OF COMPOSITE MATERIALS, 2016, vol. 50, no. 11, p. 1547-1554. ISSN: 0021-9983.
    Detail | WWW

    DLOUHÝ, I.; STRATIL, L.; FUKUTOMI, H.; HASEGAWA, M. Crack resistance characterization in TiAl intermetallics with enhanced toughness. Key Engineering Materials (print), 2016, vol. 741, no. 11, p. 13-18. ISSN: 1013-9826.
    Detail | WWW

    ČÍŽEK, J.; MATĚJKOVÁ, M.; KOUŘIL, J.; ČUPERA, J.; DLOUHÝ, I. Potential of New-Generation Electron Beam Technology in Interface Modification of Cold and HVOF Sprayed MCrAlY Bond Coats. Advances in Materials Science and Engineering, 2016, vol. N/A, no. N/A, p. 1-6. ISSN: 1687-8434.
    Detail | WWW | Full text in the Digital Library

    SEINER, H.; ČÍŽEK, J.; SEDLÁK, P.; HUANG, R.; ČUPERA, J.; DLOUHÝ, I.; LANDA, M. Elastic moduli and elastic anisotropy of cold sprayed metallic coatings. Surface and Coatings Technology, 2016, vol. 291, no. N/A, p. 342-347. ISSN: 0257-8972.
    Detail | WWW | Full text in the Digital Library

    MORAVČÍK, I.; ČÍŽEK, J.; GAVENDOVÁ, P.; SHEIKH, S.; GUO, S.; DLOUHÝ, I. Effect of heat treatment on microstructure and mechanical properties of spark plasma sintered AlCoCrFeNiTi0.5 high entropy alloy. MATERIALS LETTERS, 2016, vol. 174, no. 1, p. 53-56. ISSN: 0167-577X.
    Detail | WWW

    GAVENDOVÁ, P.; ČÍŽEK, J.; ČUPERA, J.; HASEGAWA, M.; DLOUHÝ, I. Microstructure modification of CGDS and HVOF sprayed CoNiCrAlY bond coat remelted by electron beam. Procedia Materials Science, 2016, vol. 12, no. 1, p. 89-94. ISSN: 2211-8128.
    Detail | WWW | Full text in the Digital Library

    HAVLÍK, P.; DLOUHÝ, I. Optimization of welding parameters of Ti6Al4V alloy using electron beam. Materials Engineering - Materiálové inžinierstvo (online version), 2016, vol. 23, no. 1, p. 11-19. ISSN: 1338-6174.
    Detail | WWW

    AL KHADDOUR, S.; STRATIL, L.; VÁLKA, L.; DLOUHÝ, I. Prediction of fracture toughness transition from tensile test data using artificial neural networks. In MULTI-SCALE DESIGN OF ADVANCED MATERIALS - CONFERENCE PROCEEDINGS. Brno: Brno University of Technology, 2016. p. 79-86. ISBN: 978-80-214-5358- 6.
    Detail

    VÁLKA, L.; DLOUHÝ, I. Fracture behaviour of weld joints made of pearlitic and bainitic steel. Materiálové inžinierstvo, 2016, vol. 23, no. 1, p. 33-42. ISSN: 1335-0803.
    Detail

    JAN, V.; MATĚJKOVÁ, M.; DLOUHÝ, I. USE OF COLD GAS DYNAMIC SPRAYING OF BI- METALLIC POWDER MIXTURES AS ALTERNATIVE TO CLASSIC POWDER METALLURGY ROUTE FOR PRODUCING INTERMETALLIC MATERIALS. Materiálové inžinierstvo, 2016, vol. 2016, no. 23, p. 1-10. ISSN: 1335-0803.
    Detail | WWW

    DLOUHÝ, I.; VÁLKA, L. Aplikovatelnost koncepce "master" křivky pro hodnocení lomové houževnatosti C- Mn oceli na odlitky. Slévárenství, 2016, vol. 64, no. 5- 6, p. 167-172. ISSN: 0037-6825.
    Detail

    MATLÁK, J.; DOLEŽAL, P.; ZAPLETAL, J.; DLOUHÝ, I. Electron beam surface quenching of X37CrMoV51 tool steel swages. Manufacturing TECHNOLOGY, 2016, vol. 16, no. 4, p. 744-749. ISSN: 1213-2489.
    Detail | WWW

    MORAVČÍK, I.; HANUSOVÁ, P.; ČUPERA, J.; ZAPLETAL, J.; ČÍŽEK, J.; DLOUHÝ, I. Fractography of AlCoCrFeNiTi0. 5 powder, multi-principal- element alloy. In MULTI- SCALE DESIGN OF ADVANCED MATERIALS. 2016. Brno: 2016. p. 25-29. ISBN: 978-80-214-5358- 6.
    Detail | WWW

    HAVLÍK, P.; KOUŘIL, J.; FORET, R.; DLOUHÝ, I.; ENZINGER, N.; WIEDNIG, CH. Evaluation of Weldability of Titanium Alloy Ti-6Al-4V and Aluminium Alloy 6061 Produced by Electron Beam Welding. Materials Science Forum, 2016, no. 879, p. 714-719. ISSN: 1662-9752.
    Detail | WWW

    ČÍŽEK, J.; CÉNEK, L.; MATĚJKOVÁ, M.; KOUŘIL, J.; ČUPERA, J.; DLOUHÝ, I. Potential of New- Generation Electron Beam Technology in Interface Modification of Cold and HVOF Sprayed MCrAlY Bond, Coats. In Proceedings of SMT30. Milan, Itálie: Politecnico di Milano, 2016. p. 1-5. ISBN: 9782123456803.
    Detail | WWW

    ČÍŽEK, J.; SEINER, H.; SEDLÁK, P.; HUANG, R.; ČUPERA, J.; DLOUHÝ, I.; LANDA, M. Elastic moduli, isotropy, and deformation accommodation mechanisms of cold sprayed deposits. In Proceedings of NMDFSP. Yokohama: Yokohama National University, 2016. p. 3-4. ISBN: 9782123456803.
    Detail | WWW

    HANUSOVÁ, P.; ČUPERA, J.; DLOUHÝ, I. Reactions in Ternary System Al-B2O3-C during Mechanical Alloying. Metallography 16. 2016. p. 124-124. ISBN: 978-80-553-2547-7.
    Detail

    MORAVČÍK, I.; ČÍŽEK, J.; DLOUHÝ, I.; KRAJŇÁKOVÁ, P. INFLUENCE OF SINTERING TEMPERATURE ON MICROSTRUCTURE AND HARDNESS OF AlCoCrFeNiTi0.5 HIGH ENTROPY ALLOY. In METAL 2016. Brno: TANGER Ltd., 2016. p. 64-65. ISBN: 978-80-87294-66-6.
    Detail

    MATĚJKOVÁ, M.; ČÍŽEK, J.; GEARTNER, F.; KLASSEN,; DLOUHÝ, I. Effect of processing parameters on high-energy ball milling HA/ Ti, composite powders. In Multi- scale design of advanced materials conference proceedings. 2016. p. 19-24. ISBN: 978-80-214-5358- 6.
    Detail

    ZELENÝ, M.; DLOUHÝ, I. Different Ab Initio Approaches for Doping Descriptions: Tetragonal Deformation of Ni-Mn-Ga Alloys. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Switzerland: Trans Tech Publications, 2016. p. 37-40. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail | WWW

    MORAVČÍK, I.; HANUSOVÁ, P.; ČUPERA, J.; DLOUHÝ, I. EFFECT OF MILLING AGENT (METHANOL) ON PHASE COMPOSITION AND STRUCTURE OF ALCOCRFENITI0, 5 HIGH ENTROPY ALLOY POWDERS. Materials Engineering - Materiálové inžinierstvo (online version), 2016, vol. 23, no. 4, p. 20-26. ISSN: 1338-6174.
    Detail | WWW

    MATLÁK, J.; DLOUHÝ, I. Flash electron beam welding of stainless steels 1.4510 and 1. 4511. In MULTI- SCALE DESIGN OF ADVANCED MATERIALS, CONFERENCE PROCEEDINGS. 2016. p. 44-49. ISBN: 978-80-214-5358- 6.
    Detail

    MATLÁK, J.; ŠIPULA, I.; ŠTRAUS, V.; DLOUHÝ, I. Flash electron beam welding of stainless steels 1.4510 and 1. 4511. In Twelfth International Conference on Electron Beam Technologies. Elektrotechnica & Elektronica. 2016. p. 74-78. ISSN: 0861-4717.
    Detail

    MATLÁK, J.; DOLEŽAL, P.; ZAPLETAL, J.; DLOUHÝ, I. Local electron beam heat treatment of forging dies. In Proceedings, European Conferenceon Heat Treatment 2016, and, 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications. 2016. p. 1-10. ISBN: 978-80-904462-9- 8.
    Detail

    BOCCACCINI, D.; ŠEVEČEK, O. et al. Investigation of the bonding strength and bonding mechanisms of SOFCs interconnector-electrode interfaces. MATERIALS LETTERS, 2016, vol. 2015, no. 162, p. 250-253. ISSN: 0167-577X.
    Detail | WWW

  • 2015

    ČÍŽEK, J.; MAN, O.; ROUPCOVÁ, P.; LOKE, K.; DLOUHÝ, I. Oxidation Performance of Cold Spray Ti-Al Barrier Coated gamma-TiAl Intermetallic Substrates. Surface and Coatings Technology, 2015, vol. 268, no. 4, p. 85-89. ISSN: 0257-8972.
    Detail | WWW | Full text in the Digital Library

    SOBOTOVÁ, J.; JURČI, P.; DLOUHÝ, I. The effect of subzero treatment on microstructure, fracture toughness, and wear resistance of Vanadis 6 tool steel. Materials Science and Engineering A, 2015, vol. 652, no. 1, p. 192-204. ISSN: 0921-5093.
    Detail | WWW

    HANUSOVÁ, P.; DLOUHÝ, I. Mechano- chemical induction of Nb3Al intermetallic phases formation in aluminium alumina matrix. In MULTI- SCALE DESIGN OF ADVANCED MATERIALS. Brno: 2015. p. 66-72. ISBN: 978-80-214-5146- 9.
    Detail

    MATLÁK, J.; KOUŘIL, M.; DLOUHÝ, I. Electron beam surface heat treatment of selected materials. In MULTI- SCALE DESIGN OF ADVANCED MATERIALS. 2015. p. 145-152. ISBN: 978-80-214-5146- 9.
    Detail

    MORAVČÍK, I.; ČÍŽEK, J.; DLOUHÝ, I. Preparation of high entropy alloy powders by mechano- chemical reactions. In MULTI- SCALE DESIGN OF ADVANCEDMATERIALS. Brno: Brno University of Technology, Antonínská 548/1, 601 90 Brno, 2015. p. 73-78. ISBN: 978-80-214-5146- 9.
    Detail | WWW

    GAVENDOVÁ, P.; ČÍŽEK, J.; DLOUHÝ, I.; ČUPERA, J.; HANUSOVÁ, P. COMPARISON OF CoNiCrAlY COATINGS PRODUCED BY HVOF AND CGDS- SPRAYING TECHNIQUE. In METAL 2015. Brno: Tanger Ltd., 2015. p. 152-158. ISBN: 978-80-87294-62- 8.
    Detail

    GAVENDOVÁ, P.; DLOUHÝ, I.; ČÍŽEK, J.; ČUPERA, J.; HANUSOVÁ, P. Effect of electron beam remelting to microstructure and phase modification of HVOF and CGDS CoNiCrAlY coatings. In Heat Treatment and Surface Engineering from tradition to innovation. Italy: Associazione Italia di Metallurgia, 2015. p. 152-159. ISBN: 978-88-98990-03- 0.
    Detail

    MORAVČÍK, I.; ČÍŽEK, J.; DLOUHÝ, I. MULTICOMPONENT ALLOY POWDERS PREPARATION BY MECHANICAL ALLOYING. In METAL 2015. Brno: TANGER Ltd., 2015. p. 195-205. ISBN: 978-80-87294-62- 8.
    Detail

    HAVLÍK, P.; KOUŘIL, J.; FORET, R.; DLOUHÝ, I. Vliv procesních parametrů při svařování elektronovým svazkem na výskyt vad. In Využití laseru v průmyslu. Plzeň: 2015. p. 144-149.
    Detail

    HALASOVÁ, M.; CHLUP, Z.; ČERNÝ, M.; STRACHOTA, A.; DLOUHÝ, I. Stress relaxation in partially pyrolyzed SiOC materials. In MULTI- SCALE DESIGN, OF ADVANCED MATERIALS. Brno: 2015. p. 100-105. ISBN: 978-80-214-5146- 9.
    Detail

    CHLUP, Z.; HADRABA, H.; DRDLÍK, D.; DLOUHÝ, I. Micro fibres containing laminates prepared by EPD: microstructure and fracture behaviour. Key Engineering Materials (print), 2015, vol. 654, no. 1, p. 53-57. ISSN: 1013-9826.
    Detail | WWW

    KOTOUL, M.; SKALKA, P.; DLOUHÝ, I. Crack Bridging Modelling in Bioglass® Based Scaffolds Using Gradient Elasticity Theory. In Advances in Fracture and Damage Mechanics. Key Engineering Materials (print). Pfaffikon, Switzerland: Trans Tech Publications, 2015. p. 105-108. ISSN: 1013-9826.
    Detail | WWW

    MATLÁK, J.; DOLEŽAL, P.; ZAPLETAL, J.; DLOUHÝ, I. Electron beam surface quenching of X37CrMoV51 tool steel swages. In Chemicko- tepelné zpracování kovových povrchů. 2015. p. 102-110. ISBN: 978-80-904462-8- 1.
    Detail

    VÁLKA, L.; DLOUHÝ, I. Vliv metalurgie na tranzitní lomové chování vysoce pevných konstrukcních ocelí. Slévárenství, 2015, vol. 63, no. 11- 12, p. 422-426. ISSN: 0037- 6825.
    Detail

    MORAVČÍK, I.; ČÍŽEK, J.; HRYHA,E.; DLOUHÝ, I. Preparation of AlCoCrFeNiTi0. 5 High Entropy Alloy by SPS , from Mechanically Alloyed Powders. In EURO PM 2015 Proceedings. Reims France: European powder metallurgy association, 2015. p. 1-6. ISBN: 978-1-899072-47- 7.
    Detail | WWW

    HANUSOVÁ, P.; PÁLENÍKOVÁ, L.; ČUPERA, J.; JAN, V.; DLOUHÝ, I. EFFECT OF HEAT TREATMENT ON MICROSTRUCTURE AND PHASES MODIFICATIONS OF BI – METALLIC MATERIALS. In Advances in Powder Metallurgy & Particulate Materials— 2015. Princeton, New Jersey: Metal Powder Industries Federation, 2015. p. 53-61. ISBN: 978-1-943694-01- 3.
    Detail

    MORAVČÍK, I.; ČÍŽEK, J.; GAVENDOVÁ, P.; DLOUHÝ, I. INFLUENCE OF SINTERING TEMPERATURE ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF HIGH ENTROPY ALLOY ALCOCRFENITI0, 5. Konštrukčné materiály 2015. Žilina: Zilinská univerzita, 2015. p. 10-15.
    Detail

    ČÍŽEK, J.; SEINER, H.; HUANG, R.; LANDA, M.; DLOUHÝ, I. Elastic Isotropy of Cold Sprayed Coatings. In International Thermal Spray Conference 2015 Proceedings. Long Beach, USA: ASM International, 2015. p. 353-356. ISBN: 978-1-62708-093- 4.
    Detail

    ČÍŽEK, J.; SEINER, H.; HUANG, R.; LANDA, M.; DLOUHÝ, I. Elastic Isotropy of Cold Sprayed Coatings. In International Conference of Engineering Against Failure. Skiathos, Řecko: University of Patras, 2015. p. 401-406. ISBN: 978-960-88104-5- 7.
    Detail

    ČÍŽEK, J.; SEINER, H.; HUANG, R.; LANDA, M.; DLOUHÝ, I. Elastic Isotropy of Cold Sprayed Coatings. Limoges: University of Limoges, 2015. p. 1-16.
    Detail

    HANUSOVÁ, P.; DLOUHÝ, I.; ČUPERA, J. PREPARATION OF Nb – Nb3Al/Al2O3 NANOCOMPOSITE POWDER BY MECHANO- CHEMICAL REACTION. In METAL 2015. Brno: Tanger Ltd., 2015. p. 320-325. ISBN: 978-80-87294-62- 8.
    Detail

    RUDIANTO, H.; JANG, G.; SUN, Y.; KIM, Y.; DLOUHÝ, I. Evaluation of Sintering Behavior of Premix Al-Zn-Mg-Cu Alloy Powder. Advances in Materials Science and Engineering, 2015, vol. 2015, no. 1, p. 1-8. ISSN: 1687-8442.
    Detail | WWW | Full text in the Digital Library

    RUDIANTO, H.; JANG, G.; YANG, S.; KIM, Y.; DLOUHÝ, I. Effect of SiC particles on sinterability of Al-Zn-Mg-Cu P/M alloy. Archives of Metallurgy and Materials, 2015, vol. 60, no. 2, p. 1383-1385. ISSN: 2300-1909.
    Detail | WWW | Full text in the Digital Library

    ČÍŽEK, J.; MATĚJKOVÁ, M.; DLOUHÝ, I.; ŠIŠKA, F.; KAY, C.; KARTHIKEYAN, J.; KURODA, S.; KOVÁŘÍK, O.; SIEGL, J.; LOKE, K.; KHOR, K. Influence of Cold-Sprayed, Warm-Sprayed and Plasma Sprayed Layers Deposition on Fatigue Properties of Steel Specimens. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2015, vol. 24, no. 5, p. 758-768. ISSN: 1059-9630.
    Detail | WWW | Full text in the Digital Library

  • 2014

    MARCIÁN, P.; VALÁŠEK, J.; HRSTKA, M.; MAJER, Z.; ŠEVEČEK, O.; PROFANT, T.; DLOUHÝ, I.; FLORIAN, Z. Computational Modeling of Porous Ceramics with Bioactive Layer. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 378-381. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
    Detail

    CHLUP, Z.; HADRABA, H.; DRDLÍK, D.; MACA, K.; DLOUHÝ, I.; BERMEJO, R. On the determination of the stress-free temperature for alumina-zirconia multilayer structures. Ceramics International, 2014, vol. 2014 (40), no. 4, p. 5787-5793. ISSN: 0272-8842.
    Detail

    HAVLÍK, P.; ŠOHAJ, P.; KOUŘIL, J.; FORET, R.; DLOUHÝ, I. EBW of stainless steels and ODS ferritic steel. Elektrotechnica & Elektronica, 2014, vol. 49, no. 5-6/2014, p. 82-89. ISSN: 0861-4717.
    Detail

    ČÍŽEK, J.; MATĚJKOVÁ, M.; KAY, C.; KARTHIKEYAN, J.; KURODA, S.; KOVÁŘÍK, O.; SIEGL, J.; KHOR, K.; DLOUHÝ, I. Influence of Cold, Warm and Plasma Sprayed Layers on High- Cycle Fatigue Properties of Steel Specimens. In International Thermal Spray Conference 2014 Proceedings. Barcelona, Španělsko: DVS Media GmbH, 2014. p. 577-581. ISBN: 978-3-87155-574- 9.
    Detail

    ČÍŽEK, J.; MAN, O.; DLOUHÝ, I. Influence of Cold-Sprayed Al/Ti Deposition on High-temperature Oxidation and Mechanical Properties Deterioration of Ti-Al- Nb Intermetallic Substrates. In International Thermal Spray Conference 2014 Proceedings. Barcelona, Španělsko: DVS Media GmbH, 2014. p. 903-907. ISBN: 978-3-87155-574- 9.
    Detail

    RUDIANTO, H.; JOO, J.; SUN, Y.; JIN, K.; DLOUHÝ, I. Mechanical Properties of Sintered of Al-5.5Zn-2.5Mg-0. 5Cu PM Alloy. Materials Science Forum, 2014, vol. 794- 996, no. -, p. 501-507. ISSN: 1662- 9752.
    Detail

    STRATIL, L.; ŠIŠKA, F.; HADRABA, H.; DLOUHÝ, I. Application of simplified mechanical model for description of specimen size effect on resistance against stable tearing. In Engineering mechanics 2014. Brno: Brno University of Technology, Institute of Solid Mechanics, Mechatronics nad Biomechanics, 2014. p. 596-599. ISBN: 978-80-214-4871-1.
    Detail

    STRATIL, L.; ŠIŠKA, F.; HADRABA, H.; DLOUHÝ, I. Modeling of ductile tearing for RAFM steel Eurofer97. Procedia Materials Science, 2014, vol. 3, no. 6, p. 1155-1160. ISSN: 2211-8128.
    Detail

    CHLUP, Z.; CERNÝ, M.; STRACHOTA, A.; SUCHARDA, Z.; HALASOVÁ, M.; DLOUHÝ, I. Influence of pyrolysis temperature on fracture response in SiOC based composites reinforced by basalt woven fabric. Journal of the European Ceramic Society, 2014, vol. 34, no. 14, p. 3389-3398. ISSN: 0955-2219.
    Detail

    ČÍŽEK, J.; DLOUHÝ, I.; ŠIŠKA, F.; KHOR, K. Modification of Plasma Sprayed TiO2 Coatings Characteristics via Controlling the In-flight Temperature and Velocity of the Powder Particles. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2014, vol. 23, no. 8, p. 1339-1349. ISSN: 1059-9630.
    Detail | WWW | Full text in the Digital Library

    MORAVČÍK, I.; PIŇOS, J.; ČÍŽEK, J.; DLOUHÝ, I. Mechanical Properties of Powder Deposits Compacted by Cold Spray Technology. SINTERING 2014. Nemecko: Sintering 2014, 2014. p. 308-308.
    Detail

    HANUSOVÁ, P.; NOVÁK, P.; DLOUHÝ, I. Properties of Al – Fe – X alloys depending on the method of manufacturing. Lausanne: 2014.
    Detail

    KOUŘIL, J.; DLOUHÝ, I.; VYKLICKÝ, O.; HAVLÍK, P.; MATLÁK, J. Možnosti využití technologie elektronového paprsku pro zpracování vybraných materiálů. In 25. dny tepelného zpracování s mezinárodní účastí. 2014. p. 131-138. ISBN: 978-80-904462-7- 4.
    Detail

    PORWAL, H.; TATARKO, P.; SAGGAR, R.; GRASSO, S.; MANI, M.; DLOUHÝ, I.; DUSZA, J.; REECE, M. Tribological properties of silica–graphene nano-platelet composites. Ceramics International, 2014, vol. 40, no. 8, p. 12067-12074. ISSN: 0272-8842.
    Detail

    BERTOLLA, L.; DLOUHÝ, I.; BOCCACCINI, A. Preparation and characterization of Bioglass(R)-based scaffolds reinforced bypoly-vinyl alcohol/microfibrillated cellulose composite coating. Journal of the European Ceramic Society, 2014, vol. 34, no. 14, p. 3379-3387. ISSN: 0955-2219.
    Detail

    BERTOLLA, L.; DLOUHÝ, I.; PHILIPPART, A.; BOCCACCINI, A. Mechanical reinforcement of Bioglass (R)-based scaffolds by novel polyvinyl-alcohol/microfibrillated cellulose composite coating. MATERIALS LETTERS, 2014, vol. 118, no. 3, p. 204-207. ISSN: 0167-577X.
    Detail

    TATARKO, P.; GRASSO, S.; PORWAL, H.; CHLUP, Z.; SAGGAR, R.; DLOUHÝ, I.; REECE, M. Boron nitride nanotubes as a reinforcement for brittle matrices. Journal of the European Ceramic Society, 2014, vol. 34, no. 14, p. 3339-3349. ISSN: 0955-2219.
    Detail

    GAVENDOVÁ, P.; ČÍŽEK, J.; ČUPERA, J.; HASEGAWA, M.; DLOUHÝ, I. Microstructure modification of CGDS and HVOF sprayed CoNiCrAlY bond coat remelted by electron beam. New Methods of Damage and Failure Analysis of Structural Parts. VŠB- TU Ostrava. Ostrava: Vydavatelství VŠB- TU Ostrava, 2014. p. 119-120. ISBN: 978-80-248-3488- 7.
    Detail

  • 2013

    BERTOLLA, L.; DLOUHÝ, I.; ŘEHOŘEK, L.; CHLUP, Z. Tensile properties of open cell ceramic foams. Acta metalurgica slovaca, 2013, vol. 2013(3), no. 1, p. 106-113. ISSN: 1338- 1660.
    Detail

    STRATIL, L.; HADRABA, H.; ŠIŠKA, F.; DLOUHÝ, I. A calibration of Gurson-Tvergaard- Needleman micromechanical model of ductile fracture. In Engineering mechanics 2013. Praha: Institute of Thermomechanics AS CR, v. v. i., 2013. p. 560-566. ISBN: 978-80-87012-47- 5.
    Detail

    KOUŘIL, M.; MATLÁK, J.; DLOUHÝ, I. Vybrané materiálové aspekty zpracování elektronovým paprskem. In Materiály v tepelném zpracování. 2013. p. 120-129. ISBN: 978-80-904462-6- 7.
    Detail

    CHLUP, Z.; CERNÝ, M.; STRACHOTA, A.; HALASOVÁ, M.; DLOUHÝ, I. Fibre- matrix interface development during high temperature exposition of long fibre reinforced SiOC matrix. Key Engineering Materials (web), 2013, vol. 2014, no. 592- 593, p. 401-404. ISSN: 1662- 9795.
    Detail

    STRATIL, L.; HADRABA, H.; DLOUHÝ, I. Ductile damage identification and tensile notch effect for Eurofer97 steel. Acta metalurgica slovaca, 2013, vol. 2013(3), no. 1, p. 185-190. ISSN: 1338- 1660.
    Detail

    HADRABA, H.; DRDLÍK, D.; CHLUP, Z.; MACA, K.; DLOUHÝ, I.; CIHLÁŘ, J. Layered ceramic composites via control of electrophoretic deposition kinetics. Journal of the European Ceramic Society, 2013, vol. 33, no. 12, p. 2305-2312. ISSN: 0955- 2219.
    Detail

    ČÍŽEK, J.; KHOR, K.; DLOUHÝ, I. In- Flight Temperature And Velocity of Powder Particles of Plasma Sprayed TiO2. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2013, vol. 22, no. 8, p. 1320-1327. ISSN: 1059- 9630.
    Detail | WWW | Full text in the Digital Library

    STRATIL, L.; HADRABA, H.; KOZÁK, V.; DLOUHÝ, I. Identification and application of Gurson–Tvergaard–Needleman model for sub-sized three-point- bend geometry. Acta Technica ČSAV, 2013, vol. 2013 (58), no. 2, p. 141-155. ISSN: 0001- 7043.
    Detail

    ČÍŽEK, J.; KOVÁŘÍK, O.; SIEGL, J.; KHOR, K.; DLOUHÝ, I. Influence of plasma and cold spray deposited Ti Layers on high- cycle fatigue properties of Ti6Al4V substrates. Surface and Coatings Technology, 2013, vol. 217, no. 02, p. 23-33. ISSN: 0257- 8972.
    Detail | WWW | Full text in the Digital Library

  • 2012

    HALASOVÁ, M.; CHLUP, Z.; STRACHOTA, A.; ČERNÝ, M.; DLOUHÝ, I. Mechanical response of novel SiOC glasses to high temperature exposition. Journal of the European Ceramic Society, 2012, vol. 32, no. 16, p. 4489-4495. ISSN: 0955- 2219.
    Detail

    MARCIÁN, P.; MAJER, Z.; FLORIAN, Z.; DLOUHÝ, I. Stress Strain Analysis of High Porous Ceramics. Advanced Materials Research, 2012, vol. 482- 484, no. 1, p. 1330-1333. ISSN: 1022- 6680.
    Detail

    CHLUP, Z.; HADRABA, H.; DRDLÍK, D.; MACA, K.; DLOUHÝ, I. Development of Internal Stresses in Alumina-Zirconia Laminates. Key Engineering Materials (print), 2012, vol. 507, no. 1, p. 221-226. ISSN: 1013-9826.
    Detail

    MAJER, Z.; MARCIÁN, P.; DLOUHÝ, I.; FLORIAN, Z.; ŘEHOŘEK, L.; MALINA, R. Computational modeling of highly porous materials with application in biomechanics. In Computer Methods in Biomechanics and Biomedical Engineering 2012. Berlín: British Library Cataloguing in Publication Data, 2012. p. 916-921. ISBN: 978-0-9562121-5- 3.
    Detail

    HADRABA, H.; DRDLÍK, D.; CHLUP, Z.; MACA, K.; DLOUHÝ, I. Control of Electrophoretic Deposition Kinetics for Preparation of Laminated Alumina/ Zirconia Ceramic Composites. Key Engineering Materials (print), 2012, vol. 507, no. 1, p. 209-213. ISSN: 1013- 9826.
    Detail

    HADRABA, H.; DRDLÍK, D.; CHLUP, Z.; MACA, K.; DLOUHÝ, I.; CIHLÁŘ, J. Laminated alumina/ zirconia ceramic composites prepared by electrophoretic deposition. Journal of the European Ceramic Society, 2012, vol. 32, no. 9, p. 2053-2056. ISSN: 0955- 2219.
    Detail

    CHLUP, Z.; HADRABA, H.; SLABÁKOVÁ, L.; DRDLÍK, D.; DLOUHÝ, I. Fracture behaviour of alumina and zirconia thin layered laminate. Journal of the European Ceramic Society, 2012, vol. 32, no. 9, p. 2057-2061. ISSN: 0955- 2219.
    Detail

    MARCIÁN, P.; MAJER, Z.; DLOUHÝ, I.; FLORIAN, Z. Estimation of Local Mechanical Properties of Highly Porous Ceramic Materials. Chemické listy, 2012, vol. 106, no. 1, p. 476-477. ISSN: 0009- 2770.
    Detail

    STRATIL, L.; HADRABA, H.; DLOUHÝ, I. Studie tvárného mechanismu porušování oceli Eurofer97. In Víceúrovňový design pokrokových materiálů 2012. Brno: Ústav fyziky materiálů AV ČR, v.v.i., 2012. p. 59-64. ISBN: 978-80-87434-06- 2.
    Detail

    STRATIL, L.; HADRABA, H.; KOZÁK, V.; DLOUHÝ, I. A simulation of R- curve by complete Gurson model. In 14th International conference Applied Mechanics 2012. Plzeň: Západočeská univerzita v Plzni, 2012. p. 163-166. ISBN: 978-80-261-0097- 3.
    Detail

    STRATIL, L.; KOZÁK, V.; HADRABA, H.; DLOUHÝ, I. Stress state analysis of sub-sized pre-cracked three-point- bend specimen. Engineering Mechanics, 2012, vol. 2012(19), no. 2/ 3, p. 121-129. ISSN: 1802- 1484.
    Detail

    STRATIL, L.; HADRABA, H.; KOZÁK, V.; DLOUHÝ, I. Modelling of ductile fracture for sub-sized three-point- bend geometry. In Engineering mechanics 2012. Praha: Institute of Theoretical and Applied Mechanics, 2012. p. 1253-1258. ISBN: 978-80-86246-40- 6.
    Detail

    HALASOVÁ, M.; BAČA, Ľ.; ŠAJGALÍK, P.; CHLUP, Z.; DLOUHÝ, I. Mikrostruktura a tvrdost TiB2. In Víceúrovňový design pokrokových materiálů. Brno: 2012. p. 125-132. ISBN: 978-80-87434-06- 2.
    Detail

  • 2011

    STRATIL, L.; HADRABA, H.; DLOUHÝ, I. Určování J- deltaa křivek pomocí miniaturních těles pro tříbodový ohyb. In Víceúrovňový design pokrokových materiálů 2011. Brno: Ústav fyziky materiálů AV ČR, v.v.i., 2011. p. 145-154. ISBN: 978-80-87434-04- 8.
    Detail

    MARCIÁN, P.; MAJER, Z.; DLOUHÝ, I.; FLORIAN, Z. Trabecular local mechanical properties estimation of highly porous cellurar materials. Local Mechanical Properties 2011, Book of Abstracts. 1. Olomouc 2011: Palacký University, 2011. p. 49-49. ISBN: 978-80-244-2889- 5.
    Detail

    MARCIÁN, P.; MAJER, Z.; ŘEHOŘEK, L.; FLORIAN, Z.; DLOUHÝ, I. Chapter 47: Estimation of the properties porous structures by experiment and modelling. In DAAAM International Scientific Book 2011. 10. Vienna: DAAAM International Vienna, 2011. p. 573-584. ISBN: 978-3-901509-84- 1.
    Detail

    STRATIL, L.; ČERMÁK, M.; HADRABA, H.; DLOUHÝ, I. Transferability of fracture mechanical data from sub-sized three-point- bend geometry. Limerick(IR): 2011.
    Detail

    JURČI, P.; DLOUHÝ, I. Coating of Cr– V ledeburitic steel with CrN containing a small addition of Ag. Applied Surface Science, 2011, vol. 257, no. 24, p. 10581-10589. ISSN: 0169- 4332.
    Detail

    STRATIL, L.; HADRABA, H.; BURŠÍK, J.; DLOUHÝ, I. Comparison of microstructural properties and Charpy impact behaviour between different plates of the Eurofer97 steel and effect of isothermal ageing. JOURNAL OF NUCLEAR MATERIALS, 2011, vol. 416, no. 3, p. 311-317. ISSN: 0022- 3115.
    Detail

    HADRABA, H.; KAZIMIERZAK, B.;STRATIL, L.; DLOUHÝ, I. Microstructure and impact properties of ferritic ODS ODM401 (14%Cr-ODS of MA957 type). JOURNAL OF NUCLEAR MATERIALS, 2011, vol. 417, no. 1- 3, p. 241-244. ISSN: 0022- 3115.
    Detail

    ČÍŽEK, J.; DLOUHÝ, I.; KOVÁŘÍK, O.; SIEGL, J.; KHOR, K. High Cycle Fatigue Study of Plasma and Cold Sprayed Ti Layers on Ti6Al4V Substrates. Thermal Spray 2011: Proceedings of the International Thermal Spray Conference (ASM International). Hamburg, Německo: 2011. ISBN: 978-1-4614-4366- 7.
    Detail

    STRATIL, L.; KOZÁK, V.; HADRABA, H.; DLOUHÝ, I. Stress state analysis of sub-sized pre-cracked three-point- bend specimen. In 13th Conference Applied Mechanics 2011. Brno: Ústav fyziky materiálů AV ČR, v.v.i., 2011. p. 203-206. ISBN: 978-80-87434-03- 1.
    Detail

  • 2010

    STRATIL, L.; HADRABA, H.; DLOUHÝ, I. VLIV CONSTRAINTU NA HODNOTY LOMOVÉ HOUŽEVNATOSTI V MINIATURNÍCH VZORCÍCH PRO TŘÍBODOBÝ OHYB. In Víceúrovňový design pokrokových materiálů 2010. Brno: Ústav fyziky materiálů AV ČR, 2010. p. 99-106. ISBN: 978-80-87434-02- 4.
    Detail

    STRATIL, L.; HADRABA, H.; DLOUHÝ, I. Určování lomové houževnatosti z podrozměrných vzorků typu KLST. In Design a porušování materiálů - Křehký lom 2010. Brno: Ústav fyziky materiálů AV ČR, 2010. p. 35-42. ISBN: 978-80-87434-01- 7.
    Detail

    STRATIL, L.; HADRABA, H.; DLOUHÝ, I. Mechanismy vzniku zkřehnutí a vliv žíhání na křehkolomové vlastnosti oceli EUROFER97. In 23. dny tepelného zpracování s mezinárodní účastí 2010. Čerčany: Asociace pro tepelné zpracování kovů a ECOSOND s.r.o., 2010. p. 38-44. ISBN: 978-80-904462-3- 6.
    Detail

    CHLUP, Z.; SLABÁKOVÁ, L.; DRDLÍK, D.; HADRABA, H.; DLOUHÝ, I. Lomové chování keramických laminátů se silně vázanými vrstvami. In Křehký lom. Brno: Ústav fyziky materiálů AVČR, 2010. p. 133-146. ISBN: 978-80-87434-01- 7.
    Detail

    ŘEHOŘEK, L.; DLOUHÝ, I.; CHLUP, Z. Vliv povlaku na lomové chování keramických pěn pří tahovém zatěžování. In KŘEHKÝ LOM 2010 sborník semináře Design a porušování materiálů. Design a porušování materiálů. Brno: Ústav fyziky materiálů AV ČR, v.v.i., 2010. p. 157-170. ISBN: 978-80-87434-01- 7.
    Detail

    ŠMIDA, T.; BABJAK, J.; DLOUHÝ, I. Prediction of fracture toughness temperature dependence from tensile test parameters. Kovové materiály, 2010, vol. 48, no. 1, p. 1-8. ISSN: 0023- 432X.
    Detail

    STRATIL, L.; AL KHADDOUR, S.; HADRABA, H.; DLOUHÝ, I. Neural network prediction of fracture toughness from tensile test. Karlsruhe(SRN): 2010.
    Detail

    STRATIL, L.; HADRABA, H.; DLOUHÝ, I. High temperature service embrittlement of Eurofer97 steel. Acta Metallurgica Slovaca, 2010, vol. 2010(1), no. 2, p. 142-145. ISSN: 1335- 1532.
    Detail

    DLOUHÝ, I.; BOCCACCINI, A.; KOCH, D.; LEE, W.; HORVATH, J.; DESIMONE, D. Optically-transparent oxide fibre- reinforced glasss matrix composites. Journal of Non- Crystaline Solids, 2010, vol. 356, no. 6, p. 2591-2597. ISSN: 0022- 3093.
    Detail

    CHLUP, Z.; FLAŠAR, P.; DLOUHÝ, I. Response of inherently brittle materials on higher loading rates. Engineering Fracture Mechanics, 2010, vol. 77, no. 2, p. 359-366. ISSN: 0013- 7944.
    Detail

  • 2009

    CHLUP, Z.; DLOUHÝ, I.; GÜRBÜZ, S.; DERICIOGLU, A.; KOZÁK, V. Interfacial characterisation in transparent spinel matrix reinforced by SiC fibre. Key Engineering Materials, 2009, vol. 413, no. 4, p. 252-259. ISSN: 1013- 9826.
    Detail

    STRATIL, L.; HADRABA, H.; DLOUHÝ, I. Vysokoteplotní provozní zkřehnutí oceli Eurofer97. In Fraktografia 2009. Košice, Slovenská republika. Košice (Slovac Republic): Bureš R. ; Dusza J. . - Košice, Slovenská republika : Institute of Materials Research of the Slovak Academy of Sciences in Košice, 2009. p. 257-260. ISBN: 978-80-968543-8- 7.
    Detail

    STRATIL, L.; HADRABA, H.; DLOUHÝ, I. Vlastnosti oceli Eurofer97 pro vyvíjené fůzní a štěpné reaktory. In Víceúrovňový design pokrokových materiálů - 2009. Sborník doktorské konference. Brno: Dlouhý Ivo ; Švejcar Jiří ; Mojmír Šob . - Brno : Ústav fyziky materiálů AV ČR, 2009, 2009. p. 65-74. ISBN: 978-80-254-6070- 2.
    Detail

    ŘEHOŘEK, L.; DLOUHÝ, I.; CHLUP, Z. Lomové chování keramických pěn při tahovém zatěžování. In Víceúrovňový design pokrokových materiálů 2008 sborník doktorské konference. 5. Brno: ÚFM AVČR Brno, 2009. p. 103-114. ISBN: 978-80-254-3492- 5.
    Detail

    DLOUHÝ, I.; CHLUP, Z.; HADRABA, H.; KRAHULA, K. Micromechanisms and Micromechanics of Fracture of TiAl Intermetalics. METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2009, vol. 31, no. 1, p. 1001-1016. ISSN: 1024- 1809.
    Detail

    STRATIL, L.; HADRABA, H.; DLOUHÝ, I. High temperature service embrittlement of EUROFER97 steel. Barcelona (Spain): Joint EC - IAEA (F1-TR-37435), Zeman Andrej, Hearler Peter, 2009. p. 49-49.
    Detail

    HADRABA, H.; STRATIL, L.; DLOUHÝ, I. High-temperature long-service embrittlement of the R.A.F.M. EUROFER97 steel. Kolkata (Indie): The indian Institute of Metals, 2009. p. 152-152.
    Detail

    HADRABA, H.; DLOUHÝ, I. Effect of thermal ageing on the impact fracture behaviour of Eurofer 97 steel. JOURNAL OF NUCLEAR MATERIALS, 2009, vol. 386- 388, no. xx, p. 564-568. ISSN: 0022- 3115.
    Detail

    DLOUHÝ, I.; ŘEHOŘEK, L.; CHLUP, Z. Tensile Properties of Open Cell Ceramic Foams. Key Engineering Materials (print), 2009, vol. 413, no. 4, p. 168-175. ISSN: 1013- 9826.
    Detail

    ŘEHOŘEK, L.; DLOUHÝ, I.; CHLUP, Z. Tensile behaviour of open cell ceramic foams. Ceramics- Silikáty, 2009, vol. 53, no. 4, p. 237-241. ISSN: 0862- 5468.
    Detail

  • 2008

    KOTOUL, M.; POKLUDA, J.; ŠANDERA, P.; DLOUHÝ, I.; CHLUP, Z.; BOCCACCINI, A. Toughening effects quantification in glass matrix composite reinforced by alumina platelets. Acta materialia, 2008, vol. 56, no. 12, p. 2908-2918. ISSN: 1359- 6454.
    Detail

    DLOUHÝ, A.; DOČEKALOVÁ, K.; BARTÁK, T.; DLOUHÝ, I.; ZEMČÍK, L. Refractory crucible melting and related mechanical properties of Nb- containing TiAl alloys. In Structural Aluminides for Elevated Temperatures. TMS 2008. Warrendale: The Minerals, Metals & Materials Society, 2008. p. 9-14. ISBN: 978-0-87339-720- 9.
    Detail

    BOCCACCINI, D.; CANNIO, M.; VOLKOV-HUSOVIC, T.; KAMSEU, E.; ROMAGNOLI, M.; VERONESI, P.; LEONELLI, C.; DLOUHÝ, I.; BOCCACCINI, A. Service life prediction for refractory materials. Journal of Materials Science, 2008, vol. 43, no. 12, p. 4079-4090. ISSN: 0022- 2461.
    Detail

    CHLUP, Z.; FLAŠAR, P.; KOTOJI, A.; DLOUHÝ, I. Fracture behaviour of Al2O3/ SiC nanocomposite ceramics after crack healing treatment. Journal of the European Ceramic Society, 2008, vol. 28, no. 5, p. 1073-1077. ISSN: 0955- 2219.
    Detail

    IINO, Y.; ŠVEJCAR, J.; DLOUHÝ, I.; FOREJT, M. Effect of Strain Rate 10- 4 to 10 3 s on Room Temperature Tensile Properties and Notch Plastic Zone of Type 304 Stainless Steel. In ECF17-Multilevel Approache to Fracture of Materials, Components and Structures. Brno: VUTIUM Brno, 2008. p. 773-779. ISBN: 9781617823190.
    Detail

    BOCCACCINI, D.; CANNIO, M.; VOLKOV-HUSOVIC, T.; DLOUHÝ, I.; ROMAGNOLI, M.; VERONESI, P.; LEONELLI, C. Assessment of viscoelastic crack bridging toughening in refractory materials. Journal of the European Ceramic Society, 2008, vol. 28, no. 10, p. 1941-1951. ISSN: 0955- 2219.
    Detail

  • 2007

    FLAŠAR, P.; CHLUP, Z.; DLOUHÝ, I. Měření dynamické lomové houževnatosti inherentně křehkých materiálů pomocí zkoušky rázem v ohybu. In Víceúrovňový design pokrokových materiálů. Brno: UFM, AVČR, Brno, 2007. p. 115-126. ISBN: 978-80-254-0793- 6.
    Detail

    ŘEHOŘEK, L.; CHLUP, Z.; DLOUHÝ, I.; BOCCACCINI, A. Changes in Fracture Micromechanism with Increasing Reinforcement Volume Fraction in Glass Matrix Composite. Materials Science Forum, 2007, vol. 567- 568, no. 2008, p. 369-372. ISSN: 0255- 5476.
    Detail

    KOTOUL, M.; VYSLOUŽIL, T.; BOCCACCINI, A.; DLOUHÝ, I. Crack growth in glass matrix composite reinforced by long SiC fibres. Theoretical and Applied Fracture Mechanics, 2007, vol. 49, no. x, p. 158-170. ISSN: 0167- 8442.
    Detail

    POLENA, J.; DLOUHÝ, I. Transparentní kompozity s keramickou a skelnou matricí. In Porušování a design materiálu; sborník semináře Křehký lom 2007. 2007. p. 231-242. ISBN: 978-80-254-0725- 7.
    Detail

    KOTOUL, M.; POKLUDA, J.; ŠANDERA, P.; DLOUHÝ, I.; CHLUP, Z.; BOCCACCINI, A. Experimental and theoretical investigation of fracture in glass matrix composites reinforced by alumina platelets. In Fracture Mechanics of Concrete and Concrete Structures. Taylor& Francis, 2007. p. 1691-1698. ISBN: 978-0-415-44066- 0.
    Detail

    ŘEHOŘEK, L.; CHLUP, Z.; DLOUHÝ, I. TAHOVÉ ZKOUŠKY VYSOCE PORÉZNÍCH KERAMICKÝCH MATERIÁLŮ. In Víceúrovňový design pokrokových materiálů 2007. 2007. p. 127-136. ISBN: 978-80-254-0793- 6.
    Detail

    FLAŠAR, P.; CHLUP, Z.; DLOUHÝ, I. Stanovení dynamických charakteristik inherentně křehkých materiálů pomocí zkoušky rázem ohybu. In Porušování a design materiálů. Brno: UFM, AVČR, Brno, 2007. p. 183-194. ISBN: 978-80-254-0725- 7.
    Detail

  • 2006

    FLAŠAR, P.; DLOUHÝ, I.; CHLUP, Z. Crack healing behaviour of Al2O3/ SiC nanocomposite ceramicS. In New methods of demage and failure analysis of structural parts. Ostrava: VŠB Ostrava, 2006. p. 215-222.
    Detail

    FLAŠAR, P.; DLOUHÝ, I.; CHLUP, Z. Vliv žíhání na lomové chování nanokompozitní AL2O2/ SICkeramiky. In Fraktografia2006. 2006. p. 436-441.
    Detail

  • 2004

    KOTOUL, M., DLOUHÝ, I., VYSLOUŽIL, T. Crack bridging and trapping in borosilicate matrix composites with distributed metal particles. In ECF15. Stockholm: 2004. p. 185 ( p.)
    Detail

    KOTOUL, M., DLOUHÝ, I. Metal particles constraint in glass matrix composites and its impact on fracture toughness enhancement. Materials Science and Engineering A, 2004, vol. 387- 389, no. 1- 2, p. 404 ( p.)ISSN: 0921- 5093.
    Detail

  • 2001

    DLOUHÝ, I.; VÁLKA, L.; POKLUDA, J. Competition of Transgranular and Intergranular Failure of Brittle Fracture Initiation. In Cleaner Metal for Industrial Exploitation. Řež: Inst. Nuclear Research, 2001. p. 62-73. ISBN: 92-828-8323- X.
    Detail

  • 1999

    VLACH, B., DLOUHÝ, I., HOLZMANN, M., MATUŠEK, P. Hodnocení lomové houževnatosti pro železniční dvojkolí. In Physical Metallurgy and Fracture of Materials ' 99. Slovensko: Technická univerzita v Košiciach, Slovensko, 1999. p. 87 ( p.)ISBN: 80-7099- 43.
    Detail

  • 1997

    VÁLKA, L.; HOLZMANN, M.; DLOUHÝ, I. "Master" křivka lomové houževnatosti - význam, metody určování a aplikace. In Metodické a aplikační problémy lomové mechaniky 97. Žinkovy: Škoda výzkum, s.r.o., 1997.
    Detail

    MAZAL, P.; DLOUHÝ, I.; STOLAŘ, P. Fatigue Properties of Materials Surface Hardened by Plasma Nitriding and Laser Beam. Materials and Manufacturing Processes, 1997, vol. 12, no. 1, p. 83-93. ISSN: 1042- 6914.
    Detail

    VÁLKA, L.; HOLZMANN, M.; DLOUHÝ, I. The role of microstructure in brittle fracture behaviour of low alloy tempered bainitic steel. Materials Science and Engineering A, 1997, vol. 234, p. 723-726. ISSN: 0921- 5093.
    Detail

    HOLZMANN, M.; DLOUHÝ, I.; VÁLKA, L. Tranzitní chování lomové houževnatosti jako základ hodnocení zbytkové životnosti. In Predikce mechanických vlastností materiálů na základě strukturních charakteristik. Nové Město na Moravě: 1997. p. 472-486.
    Detail

    HOLZMANN, M.; DLOUHÝ, I.; VÁLKA, L. Problematika hodnocení lomové houževnatosti nízkouhlíkových a nízkolegovaných ocelí v tranzitní oblasti. In Konštrukčné materiály 97. Bratislava: 1997. p. 161-170.
    Detail

  • 1996

    DLOUHÝ, I.; KOZÁK, V.; VÁLKA, L.; HOLZMANN, M. The susceptibility of local parameters to steel microstructure evaluated using Charpy type specimen. Journal de Physique IV, 1996, vol. 1996, no. 6, p. 205-214. ISSN: 1155- 4339.
    Detail

    HOLZMANN, M.; DLOUHÝ, I.; VÁLKA, L. Instrumented Impact Testing as a Method of Cleavage Fracture Stress Determination (Tempered Bainitic Steels). In Mechanisms and Mechanics of Damage and Failure. ECF 11, ESIS. France: 1996. p. 675-680.
    Detail

  • 1995

    DLOUHÝ, I.; VÁLKA, L.; HOLZMANN, M. Instrumentovaná zkouška vrubové houževnatosti, dynamická lomová houževnatost a jejich korelace. In Metodické a aplikační problémy lomové mechaniky. Dodatky. Plzeň: Škoda Plzeň, 1995.
    Detail

  • 1994

    DLOUHÝ, I.; HOLZMANN, M.; MAN, J.; VÁLKA, L. Použití zkušebních těles s šípovými vruby pro stanovení lomové houževnatosti ložiskových ocelí. Kovové materiály, 1994, vol. 32, no. 1, p. 3-13. ISSN: 0023- 432X.
    Detail

    HOLZMANN, M.; DLOUHÝ, I.; VÁLKA, L. Může fraktografie přispět k objasnění příčin rozptylu lomové houževnatosti v tranzitní oblasti?. In Mezinárodní fraktografická konference ' 94. Košice: TU Košice, 1994. p. 316-321.
    Detail

    DLOUHÝ, I.; VÁLKA, L.; MAN, J.; HOLZMANN, M. Experiences with Fracture Toughness Determination of Bearing Steels and White Cast Iron using Chevron- notch Three Point Bend Specimens. In 15th Conf. on Materials Testing in Metallurgy, 11th Conf. on Material Testing, "EUROMAT 94". Hungary: 1994.
    Detail

  • 1993

    DLOUHÝ, I.; HOLZMANN, M.; VÁLKA, L.; MAN, J. Hodnocení lomové houževnatosti vysoce křehkých materiálů. In IV. sympózium o zařízeních, metodách studia struktury, vlastností materiálů a transferu progresivních technologií. Brno: Conmet, 1993. p. 25-34.
    Detail

  • 1992

    DLOUHÝ, I.; HOLZMANN, M.; MAN, J.; VÁLKA, L. Použití zkušebních těles s lomenými vruby pro stanovení lomové houževnatosti ložiskových ocelí. In XIV. dny tepelného zpracování. Bratislava: 1992. ISBN: 978-80-904462-3- 6.
    Detail

*) Publications are generated once a 24 hours.