Publications

• 2024

  Yixuan Tang; Grzegorz Orzechowski; Aleš Prokop; Aki Mikkola. Monte Carlo tree search control scheme for multibody dynamics applications. NONLINEAR DYNAMICS, 2024, vol. 112, no. 10, p. 8363-8391. ISSN: 1573-269X.
  Detail | WWW

• 2023

  REKEM, J.; LÁŠTIC, D.; OTIPKA, V.; PROKOP, A. A multi-body model of an agricultural tractor suitable for studying the dynamic behaviour. Scientific Proceeding KOKA 2023. 70. Brno: Brno University of Technology, Faculty of Mechanical Engineering, 2023. p. 44-44. ISBN: 978-80-214-6164-2.
  Detail

  PROKOP, A.; HEJČL, P.; REKEM, J.; ŘEHÁK, K. VIRTUAL TRACTOR - TOOL FOR AI TESTING. Proceedings of SOFTWARE USER CONFERENCE 2023 CZ&SK. Brno: MSC.Software s.r.o., 2023.
  Detail

• 2022

  ŘEHÁK, K.; PROKOP, A. Příprava a realizace měření krátkodobých dějů. 2022. p. 1-80.
  Detail

• 2021

  OTIPKA, V.; PROKOP, A.; ŘEHÁK, K.; ZAJAC, R. Modal properties diagnostics of the high-pressure fuel injection pipes in off-road diesel engine. Journal of Measurements in Engineering, 2021, vol. 9, no. 1, p. 48-57. ISSN: 2335-2124.
  Detail | WWW | Full text in the Digital Library

  KONDRATIEV, A.; PÍŠTĚK, V.; SMOVZIUK, L.; SHEVTSOVA, M.; FOMINA, A.; KUČERA, P.; PROKOP, A. Effects of the Temperature–Time Regime of Curing of Composite Patch on Repair Process Efficiency. Polymers, 2021, vol. 13, no. 24, p. 1-20. ISSN: 2073-4360.
  Detail | WWW | Full text in the Digital Library

• 2020

  FRAŇOVÁ, Z.; ŘEHÁK, K.; PROKOP, A. TRANSMISSION ERROR OF THE SPIRAL BEVEL GEARS. In ENGINEERING MECHANICS 2020. 2020. p. 138-141. ISBN: 978-80-214-5896-3.
  Detail

  CZAKÓ, A.; ŘEHÁK, K.; PROKOP, A. DETERMINATION OF TRANSMISSION ERROR AT HELICAL GEAR. In ENGINEERING MECHANICS 2020. 2020. p. 118-121. ISBN: 978-80-214-5896-3.
  Detail

  VOPAŘIL, J.; PROKOP, A.; ŘEHÁK, K. Influence of a Powertrain Mounting Method on Powertrain Vibration. In Proceedings of the 2020 19th International Conference on Mechatronics – Mechatronika (ME). Prague: Czech Technical University in Prague, Faculty of Electrical Engineering, 2020. p. 200-206. ISBN: 978-1-7281-5601-9.
  Detail

  REKEM, J.; PROKOP, A.; ZAJAC, R.; ŘEHÁK, K. VIRTUAL ROPS TESTING ON SUSPENDED AGRICULTURAL TRACTOR. In ENGINEERING MECHANICS 2020. 2020. p. 436-439. ISBN: 978-80-214-5896-3.
  Detail

  VONDRA, R.; ŘEHÁK, K.; PROKOP, A. STRAIN-STRESS ANALYSIS OF GEAR COUPLING. In ENGINEERING MECHANICS 2020. 2020. p. 520-523. ISBN: 978-80-214-5896-3.
  Detail

  PÍŠTĚK, V.; KUČERA, P.; FOMIN, O.; LOVSKA, A.; PROKOP, A. Acoustic Identification of Turbocharger Impeller Mistuning—A New Tool for Low Emission Engine Development. Applied Sciences - Basel, 2020, vol. 10, no. 18, p. 1-15. ISSN: 2076-3417.
  Detail | WWW | Full text in the Digital Library

  CZAKÓ, A.; ŘEHÁK, K.; PROKOP, A.; RANJAN, V. Determination of static transmission error of helical gears using finite element analysis. Journal of Measurements in Engineering, 2020, vol. 8, no. 4, p. 167-181. ISSN: 2335-2124.
  Detail | WWW | Full text in the Digital Library

• 2019

  ZAJAC, R.; OTIPKA, V.; PROKOP, A.; ŘEHÁK, K. Vibro-acoustic diagnostics based on the experimental and numerical approach. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. 2019. p. 415-424. ISBN: 978-3-030-54135-4.
  Detail

  KRPALEK, D.; ŘEHÁK, K.; PROKOP, A.; PÍŠTĚK, V. Souhrnná zpráva o postupu prací za rok 2019. 2019. p. 1-19.
  Detail

  KRPALEK, D.; PROKOP, A.; ŘEHÁK, K.; PÍŠTĚK, V. Souhrnná zpráva o postupu prací za rok 2019. 2019. p. 1-21.
  Detail

  PROKOP, A.; ŘEHÁK, K.; ZAJAC, R.; OTIPKA, V. Gear Shift Investigation Using Virtual Prototype. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. Springer Science and Business Media Deutschland GmbH, 2019. p. 415-424. ISBN: 978-3-030-54135-4.
  Detail

  ŘEHÁK, K.; PROKOP, A.; ZAJAC, R.; OTIPKA, V. Acoustic and Vibration Response Analysis of Heavy-Duty Gearbox. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. Springer Science and Business Media Deutschland GmbH, 2019. p. 443-451. ISBN: 978-3-030-54135-4.
  Detail

  PROKOP, A.; ŘEHÁK, K. Gear Shift Simulation by Using Virtual Prototype. In Vibroengineering PROCEDIA, Vol. 29. Vibroengineering Procedia. 2019. p. 6-11. ISSN: 2345-0533.
  Detail

  KRPALEK, D.; PROKOP, A.; ŘEHÁK, K. Innovative Technology Application for Design of Bogie Drive Components. 2019.
  Detail

  ŘEHÁK, K.; KUČERA, P.; PROKOP, A. Application of Virtual Prototype to Heavy-duty Gearbox housing evaluation. In TRANSBALTICA XI: Transportation Science and Technology. Springer International Publishing, 2019. p. 361-368. ISBN: 978-3-030-38665-8.
  Detail | WWW

  OTIPKA, V.; ZAJAC, R.; ŘEHÁK, K.; PROKOP, A. Numerical dynamic analysis of gearbox behaviour. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. Springer Science and Business Media Deutschland GmbH, 2019. p. 433-441. ISBN: 978-3-030-54135-4.
  Detail

• 2018

  KUČERA, P.; PÍŠTĚK, V.; ŘEHÁK, K.; PROKOP, A. Transmission error analysis of the gearbox. In Transport Means 2018 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas, LITHUANIA: 2018. p. 705-708. ISSN: 1822-296X.
  Detail

  PROKOP, A.; KUČERA, P.; ŘEHÁK, K. Heavy-Duty Transmission Gear Shift Investigation by Virtual Prototypes. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 226-230. ISSN: 2345-0533.
  Detail | WWW | Full text in the Digital Library

  ŘEHÁK, K.; KUČERA, P.; PROKOP, A. Parameter effecting the experimental determination of modal properties. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 96-100. ISSN: 2345-0533.
  Detail | WWW | Full text in the Digital Library

  KRPALEK, D.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. Souhrnná zpráva o postupu prací za rok 2018. 2018. p. 1-31.
  Detail

  KUČERA, P.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. MEASUREMENT OF THE POWERTRAIN TORQUE. In Engineering Mechanics 2018. 1. 2018. p. 449-452. ISBN: 978-80-86246-88-8.
  Detail

  KUČERA, P.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. Transmission error analysis for heavy-duty gearbox. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 113-116. ISSN: 2345-0533.
  Detail | WWW | Full text in the Digital Library

  ZAJAC, R.; PROKOP, A.; ŘEHÁK, K. Determination of the modal parameters on the thin flat structures. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational Ltd., 2018. p. 91-95. ISSN: 2345-0533.
  Detail

  ZAJAC, R.; ŘEHÁK, K.; PROKOP, A. Investigation of the Harmonic Response on the Simple Structure in Structural and Acoustic Domain by Experimental and Numerical Approach. In Transport Means 2018. Transport Means. Kaunas University of Technology: 2018. p. 669-672. ISSN: 1822-296X.
  Detail

  KUČERA, P.; PÍŠTĚK, V.; ŘEHÁK, K.; PROKOP, A. Kinematics of the front axle of All-Terrain Vehicle. In Transport Means 2018 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas, LITHUANIA: 2018. p. 560-563. ISSN: 1822-296X.
  Detail

  KRPALEK, D.; PROKOP, A.; ŘEHÁK, K.; PÍŠTĚK, V. Souhrnná zpráva o postupu prací za rok 2018. 2018. p. 1-29.
  Detail

• 2017

  VOPAŘIL, J.; DRÁPAL, L.; PROKOP, A. Verification of FEM Design Process of Vehicle Powertrain Mounts. In Transport Means 2017 – Proceedings of the 21st International Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2017. p. 741-746. ISSN: 1822-296X.
  Detail

  KRPALEK, D.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. Souhrnná zpráva o postupu prací za rok 2017. 2017. p. 1-20.
  Detail

  ŘEHÁK, K.; KOPEČKOVÁ, B.; PROKOP, A. Gear Drive System Simulation with Different Model of Input Speed. In Acoustics and Vibration of Mechanical Structures—AVMS-2017. Springer Proceedings in Physics. 1. Springer, Cham, 2017. p. 331-339. ISBN: 9783319698236. ISSN: 0930-8989.
  Detail

  ŘEHÁK, K.; KOPEČKOVÁ, B.; PROKOP, A. Dynamic Analysis of Single Stage Gearbox with Backlash Influence. In Transport Means 2017. Transport Means. Kaunas Lithuania: 2017. p. 575-579. ISSN: 1822-296X.
  Detail

  NOVOTNÝ, P.; DRÁPAL, L.; PROKOP, A.; ŘEHÁK, K. Modelling the powertrain rubber coupling under dynamic conditions. Journal of Vibroengineering, 2017, vol. 19, no. 5, p. 3710-3719. ISSN: 1392-8716.
  Detail

  NOVOTNÝ, P.; DLUGOŠ, J.; PROKOP, A.; ŘEHÁK, K.; RAFFAI, P. Effective computational model for a solution of turbocharger rotor dynamics. Journal of Vibroengineering, 2017, vol. 19, no. 2, p. 724-736. ISSN: 1392-8716.
  Detail

  PROKOP, A.; KOPEČKOVÁ, B.; ŘEHÁK, K. Gear Drive System Simulation of Input Parameters Effect on Rattle. In Acoustics and Vibration of Mechanical StructureS. Springer Proceedings in Physics. 1. Springer, Cham, 2017. p. 381-388. ISBN: 9783319698236. ISSN: 0930-8989.
  Detail

  PROKOP, A.; KOPEČKOVÁ, B.; ŘEHÁK, K. Dynamic Analysis of Single Stage Gearbox Focused on Input Parameters Influence. In Transport Means 2017. Transport Means. Kaunas Lithuania: 2017. p. 479-484. ISSN: 1822-296X.
  Detail

  PROKOP, A.; ŘEHÁK, K. VIRTUAL PROTOTYPE APPLICATION TO HEAVY-DUTY VEHICLE GEARBOX CONCEPT. In Engineering Mechanics 2017. 1. 2017. p. 810-813. ISBN: 978-80-214-5497-2.
  Detail

  ŘEHÁK, K.; KOPEČKOVÁ, B.; PROKOP, A. Numerical simulation of gearbox structure dynamics focused on backlash influence. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Geliu ratas 15A, LT-50282, Kaunas, Lithuania: JVE International Ltd., 2017. p. 115-120. ISSN: 2345-0533.
  Detail

• 2016

  NOVOTNÝ, P.; PROKOP, A.; ŘEHÁK, K. Complex strategy for a development of highly elastic couplings. In Vibroengineering PROCEDIA. Vibroengineering Procedia. 7. Geliu ratas 15A, LT-50282,Kaunas, Lithuania: JVE International Ltd., 2016. p. 97-102. ISSN: 2345-0533.
  Detail

  ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M. Comparison of Torque Influence on Single Stage Gearbox Vibrations. In KOKA 2016. Brno: 2016. p. 173-178. ISBN: 978-80-214-5379- 1.
  Detail

  ZUBÍK, M.; PROKOP, A.; ŘEHÁK, K. Investigation of single stage gearbox parameters including variable torque conditions. In Transport Means 2016. Transport Means. Kaunas, Lithuania: Technologija, 2016. p. 720-724. ISSN: 1822-296X.
  Detail

  NOVOTNÝ, P.; ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M. Solution of dynamics and acoustics by virtual powertrain. In Engineering Mechanics 2016. PRAGUE, CZECH REPUBLIC: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, 2016. p. 482-486. ISBN: 978-80-87012-59- 8.
  Detail

  ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M.; NOVOTNÝ, P. INVESTIGATION OF SINGLE STAGE GEARBOX PARAMETERS INFLUENCING SURFACE NORMAL VELOCITY. In Engineering Mechanics 2016. 2016. p. 478-481. ISBN: 978-80-87012-59- 8.
  Detail

  NOVOTNÝ, P.; PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K. Investigating the influence of computational model complexity on noise and vibration modeling of powertrain. Journal of Vibroengineering, 2016, vol. 18, no. 1, p. 378-393. ISSN: 1392-8716.
  Detail | WWW | Full text in the Digital Library

  ŘEHÁK, K.; PROKOP, A. Numerical simulation of single stage gearbox with tooth damage. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International Ltd., 2016. p. 88-92. ISSN: 2345-0533.
  Detail

• 2015

  ZUBÍK, M.; PROKOP, A.; ŘEHÁK, K.; NOVOTNÝ, P. The effect of the gear parameters to the noise of transmission. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International Ltd., 2015. p. 357-362. ISSN: 2345-0533.
  Detail

  PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Approach for Assessment of Experimental Gearbox NVH Parameters. In FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY V. 1. Hong Kong, PEOPLES R CHINA: DESTECH PUBLICATIONS, INC, 439 DUKE STREET, LANCASTER, PA 17602-4967 USA, 2015. p. 266-271. ISBN: 978-1-60595-270-3.
  Detail

  PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Complex Evaluation of Transmission NVH Parameters. In Transport Means 2015. Transport Means. Kaunas: Kaunas University of Technology, 2015. p. 563-566. ISSN: 1822-296X.
  Detail

  PROKOP, A.; ŘEHÁK, K.; ZUBÍK, M.; NOVOTNÝ, P. Experimental Validation of the Gearbox NVH Parameters. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 2015, no. 2, p. 16-21. ISSN: 1214- 0821.
  Detail

  PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Computational tools for transmission dynamics modelling. In Setkání uživatelů MSC. SOFTWARE 2015. 1. MSC.Software s.r.o., 2015. p. 146-150.
  Detail

  PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. VIRTUAL GEARBOX DEVELOPMENT AND VERIFICATION. In KOKA 2015. Bratislava: Faculty of Mechanical Engineering, Slovak University of Technology and Designing, Department of Cars, Ships and Combustion Engines, 2015. p. 239-244. ISBN: 978-80-227-4424- 9.
  Detail

• 2014

  ZUBÍK, M.; NOVOTNÝ, P.; PROKOP, A.; JANOUŠEK, M. Virtual Powertrain – a Tool for NVH Improvement. In Setkání uživatelů MSC. SOFTWARE 2014. 1. MSC.Software s.r.o., 2014. p. 95-100. ISBN: 978-80-260-6033- 8.
  Detail

• 2013

  PROKOP, A. Inverse Monitoring of Loading State with Output Measurements. International Journal of COMADEM, 2013, vol. 16, no. 2, p. 54-59. ISSN: 1363- 7681.
  Detail

  JANOUŠEK, M.; PROKOP, A.; NOVOTNÝ, P. Locating of the Noise Sources in Automotive Industry. In Proceedings of the XLIV. International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engines. Brno: Mendelova univerzita v Brně, 2013. p. 133-140. ISBN: 978-80-7375-801- 1.
  Detail

• 2011

  AMBRÓZ, R.; PÍŠTĚK, V.; NOVOTNÝ, P.; PROKOP, A. Simulation and Experimental Tools For Powertrain Noise Reduction. Technológ, 2011, vol. 2011, no. 3, p. 28-36. ISSN: 1337- 8996.
  Detail

*) Publications are generated once a 24 hours.