Publikace
2023
KOTRBÁČEK, P.; CHABIČOVSKÝ, M.; RESL, O.; KOMÍNEK, J.; LUKS, T. The Efficient Way to Design Cooling Sections for Heat Treatment of Long Steel Products. Materials, 2023, roč. 16, č. 11,
s. 1-13. ISSN: 1996-1944.
Detail | WWW | Plný text v Digitální knihovně2022
POHANKA, M.; LUKS, T. Study of Rapid Cooling. 2022.
DetailPOHANKA, M.; LUKS, T. 2 HTC Measurements _ Linear. 2022.
Detail2021
KOMÍNEK, J.; LUKS, T.; POHANKA, M.; HWANG, J. Y. Influence of Segmented Rolls on Homogeneity of Cooling in Continuous Casting. Metals, 2021, roč. 11, č. 8,
s. 1-11. ISSN: 2075-4701.
Detail | WWW | Plný text v Digitální knihovněBELLEROVÁ, H.; LUKS, T.; RAUDENSKÝ, M.; RESL, O. HEAT TRANSFER COEFFICIENT DURING SPRAY COOLING OF VERY HOT SURFACES BY FLAT NOZZLES. Italy: Associazione Italiana di Metallurgia, 2021.
s. 1-10. ISBN: 978-88-98990-24-5.
Detail2020
KOTRBÁČEK, P.; BELLEROVÁ, H.; LUKS, T.; RAUDENSKÝ, M. Heat Transfer Correlations for Secondary Cooling in Continuous Casting. STEEL RESEARCH INTERNATIONAL, 2020, roč. 11, č. 1,
s. 1-8. ISSN: 1611-3683.
Detail | WWW2018
KOTRBÁČEK, P.; LUKS, T.; RAUDENSKÝ, M. Měření chladicích účinků trysek sekundárního chlazení ZPO. Hutnické listy, 2018, roč. LXXI, č. 6,
s. 126-130. ISSN: 0018-8069.
Detail | WWWKOMÍNEK, J.; LUKS, T.; POHANKA, M.; RAUDENSKÝ, M.; HWANG, J-Y. SECONDARY COOLING OVERLAPPED WITH BEARING HOUSING IN A CONTINUOUS CASTER. In Sborník konference METAL 2018. Ostrava: Tanger, Ostrava, 2018.
s. 1-6. ISBN: 978-80-87294-83-3.
DetailKOTRBÁČEK, P.; LUKS, T.; HORSKÝ, J. Měření chladících účinků trysek sekundárního chlazení ZPO. In Odborná konferencia ŽP VVC 2018 Zborník príspevkov. Brezno: ŽP Výskumno-vývojové centrum s.r.o., 2018.
s. 65-70. ISBN: 978-80-973141-0-1.
Detail2017
LUKS, T. Study of the Nozzle Parametres. 2017.
s. 1-32.
DetailPOHANKA, M.; RAUDENSKÝ, M.; LUKS, T. Study of Impact measurements specified by customer. 2017.
s. 1-40.
DetailKOTRBÁČEK, P.; CHABIČOVSKÝ, M.; LUKS, T. 2500020841/HSL/SP17. 2017.
s. 1-14.
DetailKOTRBÁČEK, P.; LUKS, T.; CHABIČOVSKÝ, M. Determining HTC coefficients. 2017.
s. 1-16.
DetailKOTRBÁČEK, P.; CHABIČOVSKÝ, M.; LUKS, T. HTC coefficients. 2017.
s. 1-31.
Detail2016
LUKS, T.; RAUDENSKÝ, M.; KVAPIL, J.; KOMÍNEK, J. Thermal contact conductance. 2016.
s. 1-37.
DetailHORSKÝ, J.; KOTRBÁČEK, P.; LUKS, T.; STRÁNSKÝ, M.; HRABOVSKÝ, J. Project Model Quette 1& 2 Tasks. 2016.
s. 1-48.
DetailKOTRBÁČEK, P.; LUKS, T. Měření ostřikových charakteristik trysek. 2016.
s. 1-21.
DetailHORSKÝ, J.; KOTRBÁČEK, P.; LUKS, T. Studie vlastností HTC trysky sekundárního chlazení kontilití AM Ostrava ZPO1. 2016.
s. 1-18.
DetailBROŽOVÁ, T.; LUKS, T.; ASTROUSKI, I.; RAUDENSKÝ, M. Fatigue Testing of Polymeric Hollow Fibre Heat Transfer Surfaces, by Pulsating Pressure Loads. In Engineering Mechanics 2015. Applied Mechanics and Materials. Switzerland: Trans Tech Publications, 2016.
s. 3-9. ISBN: 978-3-03835-700- 1. ISSN: 1660- 9336.
DetailHORSKÝ, J.; KOTRBÁČEK, P.; LUKS, T. Heat Transfer Measurement on Cooling System, Plant Tests. 2016.
s. 1-140.
DetailHORSKÝ, J.; BROŽOVÁ, T.; LUKS, T. Heat Transfer measurement of secondary cooling in continuous casting. 2016.
s. 1-17.
Detail2015
HORSKÝ, J.; BROŽOVÁ, T.; LUKS, T.; KEJÍK, P.; KRIŠTOF, O.; BULEJKO, P. Heat Transfer measurement of secondary cooling in continuous casting. 2015.
s. 1-119.
DetailKOTRBÁČEK, P.; HORSKÝ, J.; LUKS, T.; POHANKA, M. NUMERICAL SIMULATION AND VERIFICATION OF ROLL, TEMPERATURE HISTORY DURING ROLLING CAMPAIGN. Roll5 2015. London, United Kingdom: IOM Communicatiins Ltd, 2015.
s. 1-11.
DetailBROŽOVÁ, T.; LUKS, T.; ASTROUSKI, I.; RAUDENSKÝ, M. Fatigue Testing of Polymeric Hollow Fibre Heat Transfer Surfaces, by Pulsating Pressure Loads. In ENGINEERING MECHANICS 2015, 21st International Conference Engineering Mechanics 2015. Engineering mechanics 2014. 1. Svratka: Institute of Theoretical and Applied Mechanics, 2015.
s. 30-31. ISBN: 978-80-86246-42- 0. ISSN: 1805- 8248.
Detail | WWWLUKS, T.; HORSKÝ, J.; BARTULI, E. Experimentální stanovení teplotních a silových poměrů ve válcovací mezeře. Hutnické listy, 2015, roč. LXVIII, č. 4,
s. 9-14. ISSN: 0018- 8069.
DetailHORSKÝ, J.; BROŽOVÁ, T.; LUKS, T.; KEJÍK, P.; KRIŠTOF, O.; BULEJKO, P. Heat Transfer measurement of secondary cooling in continuous casting. 2015.
s. 1-16.
Detail2014
KOTRBÁČEK, P.; LUKS, T.; HŘIBOVÁ, V. Měření ostřikových charakteristik trysek. 2014.
s. 1-19.
DetailHORSKÝ, J.; LUKS, T.; HŘIBOVÁ, V. Heat Transfer Measurement. 2014.
s. 1-20.
DetailLUKS, T.; HORSKÝ, J.; NILSSON, A.; JONSSONS, N.; LAGERGREN, J. Contact stress distribution and roll surface temperature in the roll gap analyzed with different sensors. La Metallurgia Italiana, 2014, roč. 160, č. 1,
s. 19-25. ISSN: 0026-0843.
DetailKOTRBÁČEK, P.; LUKS, T.; HŘIBOVÁ, V. Cooling efficiency of the nozzles. 2014.
s. 1-20.
DetailHORSKÝ, J.; LUKS, T. Temaprature sensot for hot rolling application. 2014.
s. 1-20.
Detail2013
KOTRBÁČEK, P.; HORSKÝ, J.; LUKS, T.; STRÁNSKÝ, M. Experimentální měření součinitele přestupu tepla. 2013.
s. 1-23.
DetailHORSKÝ, J.; LUKS, T.; ONDROUŠKOVÁ, J.; HNÍZDIL, M.; KOMÍNEK, J.; KRIŠTOF, O.; KEJÍK, P. Heat Transfer measurement of secondary cooling in continuous casting. 2013.
s. 1-30.
DetailLEGRAND, N.; WEISZ-PATRAULT, D.; HORSKY, J.; LUKS, T.; LABBE, N.; PICARD, M.; EHRLACHER, A. Characterization of roll bite heat transfers in hot steel strip rolling and their influence on roll thermal fatigue degradation. In 16th ESAFORM Conference on Material Forming. Key Engineering Materials (print). SWITZERLAND: TRANS TECH PUBLICATIONS LTD, 2013.
s. 1555-1569. ISBN: 9783037857199. ISSN: 1013-9826.
Detail | WWWHORSKÝ, J.; KOTRBÁČEK, P.; LUKS, T.; KRIŠTOF, O. Heat Transfer Measurement on Cooling Systém, Plant Tests. 2013.
s. 1-119.
DetailHORSKÝ, J.; LUKS, T.; POHANKA, M.; KVAPIL, J. Thermal and friction sensors for roll-gap - development. 2013.
s. 1-30.
Detail2012
ONDROUŠKOVÁ, J.; LUKS, T.; HORSKÝ, J. Nozzle cooling of hot surfaces with various orientations. EPJ Web of Conferences, 2012, roč. 25, č. 4,
s. 1-10. ISSN: 2100-014X.
Detail | WWW | Plný text v Digitální knihovněHORSKÝ, J.; RAUDENSKÝ, M.; LUKS, T. Thermal Load and Fatigue of Rolls in Hot Rolling. In 2012 AISTech Conference Proceedings. AIST Association for Iron& Steel Technology. Atlanta (GA, U.S.A.): AISTech 2012, 2012.
s. 2149-2157. ISBN: 978-1-935117-24- 7. ISSN: 1551-6997.
DetailLEGRAND, N.; LABBE, N.; WEISZ-PATRAULT, D.; EHRLACHER, A.; LUKS, T.; HORSKÝ, J. Analysis of roll gap heat transfers in hot steel strip rolling through roll temperature sensors and heat transfer models. Key Engineering Materials (print), 2012, roč. 504- 506, č. 2,
s. 1043-1048. ISSN: 1013- 9826.
Detail | WWWWEISZ-PATRAULT, D.; LEGRAND, N.; LABBE, N.; HORSKÝ, J.; LUKS, T.; EHRLACHER, A. Experimental Study of Interfacial Heat Flux and Surface Temperature by Inverse Analysis with Thermocouples (fuly embedded) during Hot Steel Strip Rolling. Advanced Materials Research, 2012, roč. 452- 453, č. 3,
s. 959-963. ISSN: 1022- 6680.
Detail | WWWHORSKÝ, J.; ONDROUŠKOVÁ, J.; LUKS, T.; CHABIČOVSKÝ, M. HTC Measurements for Secondary Cooling Nozzles. 2012.
s. 1-74.
DetailRAUDENSKÝ, M.; POHANKA, M.; ONDROUŠKOVÁ, J.; LUKS, T.; STRÁNSKÝ, M. Heat Transfer Evaluation of Hybrid Mist Nozzles. 2012.
s. 1-70.
DetailWEISZ-PATRAULT, D.; EHRLACHER, A.; LEGRAND, N.; LABBE, N.; HORSKÝ, J.; LUKS, T. Experimental study of interfacial heat flux and surface temperature by inverse analysis with thermocouple (fully embedded) during hot steel strip rolling. In 2011 International Conference on Management, Manufacturing and Materials Engineering. Advanced Materials Research. 2012.
s. 959-963. ISBN: 9783037853511. ISSN: 1022-6680.
DetailRAUDENSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; LUKS, T.; KVAPIL, J.; PELÍŠEK, M.; HRAZDIL, V. Measurement of the existing sprayline cooling capacity and determining of upper limit of cooling intensity. 2012.
s. 1-36.
Detail2011
LUKS, T.; ONDROUŠKOVÁ, J.; HORSKÝ, J. Nozzle cooling of hot surfaces with various orientations. In Experimental fluid Mechanics 2011. Proceedings of the International conference. Jičín: 2011.
s. 337-346. ISBN: 978-80-7372-784- 0.
Detail
*) Citace publikací se generují jednou za 24 hodin.