Publikace

• 2024

  TUREK, V.; KILKOVSKÝ, B.; DAXNER, J.; BABIČKA FIALOVÁ, D.; JEGLA, Z. Industrial waste heat utilization in the European Union—An engineering-centric review. ENERGIES, 2024, roč. 17, č. 9, ISSN: 1996-1073.
  Detail | WWW | Plný text v Digitální knihovně

• 2023

  TUREK, V.; JEGLA, Z.; DOHNAL, M.; REPPICH, M. Using numerical dissipation rate and viscosity to assess turbulence-related data accuracy - Part 2: Results. CHEMIE INGENIEUR TECHNIK, 2023, roč. 95, č. 9, s. 1448-1456. ISSN: 0009-286X.
  Detail | WWW | Plný text v Digitální knihovně

  TUREK, V.; JEGLA, Z.; DOHNAL, M.; REPPICH, M. Using numerical dissipation rate and viscosity to assess turbulence-related data accuracy - Part 1: Experimental setup. CHEMIE INGENIEUR TECHNIK, 2023, roč. 95, č. 9, s. 1441-1447. ISSN: 0009-286X.
  Detail | WWW | Plný text v Digitální knihovně

• 2022

  PUTNA, O.; PAVLAS, M.; TUREK, V.; FAN, Y. Influence of waste-to-energy plant integration on local immission load. Clean Techn Environ Policy, 2022, roč. 24, č. 10, s. 3047-3059. ISSN: 1618-9558.
  Detail | WWW

• 2021

  TUREK, V.; JEGLA, Z.; KILKOVSKÝ, B. Designing Integrated Equipment for ‘Waste-to-Energy’ Processes. Book of Abstracts of the Energy, Sustainability and Climate Change Conference. Volos, Greece: Department of Mechanical Engineering, University of Thessaly, 2021. s. 103-103. ISSN: 2653-8911.
  Detail | WWW

  REPPICH, M.; JEGLA, Z.; GRONDINGER, J.; AZOUMA, Y.; TUREK, V. Mathematical modeling of drying processes of selected fruits and vegetables. CHEMIE INGENIEUR TECHNIK, 2021, roč. 93, č. 10, s. 1581-1589. ISSN: 0009-286X.
  Detail | WWW | Plný text v Digitální knihovně

  PUTNA, O.; PAVLAS, M.; TUREK, V. Influence of Waste-to-Energy Plant Integration on Local Immission Load. In Proceedings of the 16th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES). Proceedings of SDEWES Conference on Sustainable Development of Energy, Water and Environment Systems. Zagreb, Croatia: Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2021. s. 175-1 (175-12 s.)ISSN: 1847-7178.
  Detail | WWW

  TUREK, V.; JEGLA, Z.; UCEKAJ, V.; KORČEK, L. Systematic design of integrated equipment for “waste-to-energy” processes. Proceedings of the 24th International Congress of Chemical and Process Engineering (CHISA 2021). Praha: ČSCHI, 2021. s. 586.1-586.1.
  Detail | WWW

• 2020

  PLUSKAL, J.; ŠOMPLÁK, R.; TUREK, V.; SMEJKALOVÁ, V.; NEVRLÝ, V. Mixing approach to waste composition and its lower heating value impact on Waste-to-Energy plant. Chemical Engineering Transactions, 2020, roč. 81, č. 1, s. 751-756. ISSN: 2283-9216.
  Detail | WWW

  TUREK, V.; LÉTAL, T.; JEGLA, Z.; HÁJEK, M.; MAZÁNEK, L.; NANTL, R.; KRŇÁVEK, M. Fast, approximate analyses of heat transfer and fluid flow using Finite Element Analysis. Book of Abstracts of the Energy, Sustainability and Climate Change Conference. 2020. s. 5-5. ISSN: 2653-8911.
  Detail

  LÉTAL, T.; LOŠÁK, P.; TUREK, V.; JEGLA, Z.; STRAKOŠ, M.; MACHOLA, O.; UCEKAJ, V. Challenges in bolted flange connection performance evaluation. Book of Abstracts of the Energy, Sustainability and Climate Change Conference. 2020. s. 8-8. ISSN: 2653-8911.
  Detail

  LÉTAL, T.; TUREK, V.; BABIČKA FIALOVÁ, D.; JEGLA, Z. Nonlinear Finite Element Analysis-based flow distribution and heat transfer model. ENERGIES, 2020, roč. 13, č. 7, s. 1-20. ISSN: 1996-1073.
  Detail | WWW | Plný text v Digitální knihovně

  JEGLA, Z.; TUREK, V.; LÉTAL, T.; ŠIKULA, J.; KORČEK, L.; GABRIEL, P.; HORSÁK, J. Opportunities and Challenges in the Development of Modern Integrated Equipment for Waste-to-Energy Units. Book of Abstracts of the Energy, Sustainability and Climate Change Conference. 2020. s. 6-7. ISSN: 2653-8911.
  Detail

  AZOUMA, Y.; DRIGALSKI, L.; JEGLA, Z.; REPPICH, M.; TUREK, V.; WEIß, M. Indirect Convective Solar Drying Process of Pineapples as Part of Circular Economy Strategy. Challenges and Opportunities for the Renewable Energy Economy. Basel, Switzerland: MDPI AG, 2020. s. 117-134. ISBN: 978-3-03936-473-2.
  Detail

  LÉTAL, T.; TUREK, V.; BABIČKA FIALOVÁ, D.; JEGLA, Z. Nonlinear Finite Element Analysis-based flow distribution and heat transfer model. Selected Papers from PRES’19. Basel, Switzerland: MDPI, 2020. s. 295-314. ISBN: 978-3-03943-120-5.
  Detail

• 2019

  LÉTAL, T.; TUREK, V.; FIALOVÁ, D. Nonlinear finite element analysis-based flow distribution model for engineering practice. Chemical Engineering Transactions, 2019, roč. 76, č. 1, s. 157-162. ISSN: 2283-9216.
  Detail | WWW

  TUREK, V. Improving performance of simplified computational fluid dynamics models via symmetric successive overrelaxation. ENERGIES, 2019, roč. 12, č. 12, s. 1-16. ISSN: 1996-1073.
  Detail | WWW | Plný text v Digitální knihovně

  JEGLA, Z.; KILKOVSKÝ, B.; TUREK, V. Elektronický i-s diagram pracovní látky geotermální turbíny. Brno: VUT v Brně, FSI, ÚPI, 2019. s. i (22 s.)
  Detail

  JEGLA, Z.; KILKOVSKÝ, B.; TUREK, V. Rozšíření elektronického i-s diagramu pracovní látky geotermální turbíny. Brno: VUT v Brně, FSI, ÚPI, 2019. s. i (11 s.)
  Detail

  AZOUMA, Y.; DRIGALSKI, L.; JEGLA, Z.; REPPICH, M.; TUREK, V.; WEIß, M. Indirect Convective Solar Drying Process of Pineapples as Part of Circular Economy Strategy. ENERGIES, 2019, roč. 12, č. 15, s. 1-18. ISSN: 1996-1073.
  Detail | WWW | Plný text v Digitální knihovně

• 2018

  TUREK, V.; KILKOVSKÝ, B.; JEGLA, Z.; STEHLÍK, P. Proposed EU legislation to force changes in sewage sludge disposal – A case study. Frontiers of Chemical Science and Engineering, 2018, roč. 12, č. 4, s. 660-669. ISSN: 2095-0187.
  Detail | WWW

  JEGLA, Z.; KILKOVSKÝ, B.; TUREK, V. Vlastnosti pracovní látky pro geotermální turbínu a jejich programové zpracování. Brno: VUT v Brně, FSI, ÚPI, 2018. s. i (33 s.)
  Detail

  AZOUMA, Y.; JEGLA, Z.; REPPICH, M.; TUREK, V.; WEIß, M. Using agricultural waste for biogas production as a sustainable energy supply for developing countries. CHEMICAL ENGINEERING TRANSACTIONS, 2018, roč. 70, č. 1, s. 445-450. ISSN: 2283-9216.
  Detail

  TUREK, V. On improving computational efficiency of simplified fluid flow models. Chemical Engineering Transactions, 2018, roč. 70, č. 1, s. 1447-1452. ISSN: 2283-9216.
  Detail | WWW

• 2017

  JEGLA, Z.; TUREK, V.; KILKOVSKÝ, B.; STEHLÍK, P. Methods and Tools for Reliable Design of Equipment in Waste-to-Energy Units. CHEMICAL ENGINEERING TRANSACTIONS, 2017, roč. 61, č. 1, s. 37-42. ISSN: 2283-9216.
  Detail

  JEGLA, Z.; KILKOVSKÝ, B.; TUREK, V.; BRUMMER, V. Technicko-ekonomické posouzení energeticky výhodné technologie pro sušení čistírenských kalů z ČOV. Brno, Czech Republic: 2017.
  Detail

• 2016

  TUREK, V.; FIALOVÁ, D.; JEGLA, Z. Efficient flow modelling in equipment containing porous elements. In Chemical Engineering Transactions. CHEMICAL ENGINEERING TRANSACTIONS. Milano, Italy: Aidic Servizi, S.r.l., 2016. s. 487-492. ISBN: 978-88-95608-42-6. ISSN: 2283-9216.
  Detail | WWW

  JEGLA, Z.; KILKOVSKÝ, B.; TUREK, V. Novel approach to proper design of combustion and radiant chambers. Applied Thermal Engineering, 2016, roč. 105, č. 1, s. 876-886. ISSN: 1359-4311.
  Detail | WWW

• 2015

  KILKOVSKÝ, B.; JEGLA, Z.; TUREK, V. Identification of the Most Effective Heat Exchanger for Waste Heat Recovery. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). CHEMICAL ENGINEERING TRANSACTIONS. Milano, Italy: Aidic Servizi Srl, 2015. s. 307-312. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
  Detail

  KILKOVSKÝ, B.; TUREK, V.; JEGLA, Z.; STEHLÍK, P. Fouling in heavily polluted gas applications – experience, know-how, sophisticated approach. In Dublin, Ireland: 2015. s. 289-291.
  Detail | WWW

  TUREK, V.; FIALOVÁ, D.; JEGLA, Z.; KILKOVSKÝ, B. Efficient 2D Model of Flow Distribution in Dense Tube Bundles. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). CHEMICAL ENGINEERING TRANSACTIONS. Milano, Italy: Aidic Servizi Srl, 2015. s. 1177-1182. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
  Detail

  JEGLA, Z.; HORSÁK, J.; TUREK, V.; KILKOVSKÝ, B.; TICHÝ, J. Validation of Developed Modified Plug-Flow Furnace Model for Identification of Burner Thermal Behaviour. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). CHEMICAL ENGINEERING TRANSACTIONS. Milano, Italy: Aidic Servizi Srl, 2015. s. 1189-1194. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
  Detail

• 2014

  PAČÍSKA, T.; TUREK, V.; JEGLA, Z.; KILKOVSKÝ, B. Suitability of some commonly available software for unconventional condenser analysis. Applied Thermal Engineering, 2014, roč. 70, č. 2, s. 1195-1201. ISSN: 1359-4311.
  Detail

  TUREK, V.; JEGLA, Z.; STEHLÍK, P. Tubeside pressure drop and flow distribution comparisons of the evaluated API cooler geometries; related recommendations. Brno, Czech Republic: 2014.
  Detail

  TUREK, V.; BÉBAR, L.; JEGLA, Z. Simplified Pressure Drop and Flow Distribution Modelling in Radial Catalytic Converters. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. CHEMICAL ENGINEERING TRANSACTIONS. Milan, Italy: Aidic Servizi S.r.l., 2014. s. 853-858. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
  Detail

  STEHLÍK, P.; TUREK, V.; JEGLA, Z.; KILKOVSKÝ, B. Heat Recovery in Difficult "Polluted Flue Gas Applications" in Waste to Energy Systems. In Proceedings of the 15th International Heat Transfer Conference (IHTC-15). Kyoto, Japan: 2014. s. 1-20. ISBN: 978-1-56700-421- 2.
  Detail

• 2013

  PAČÍSKA, T.; JEGLA, Z.; KILKOVSKÝ, B.; REPPICH, M.; TUREK, V. Thermal Analysis of Unconventional Process Condenser Using Conventional Software. In Chemical Engineering Transactions, Vol. 35: Selected Papers of PRES' 13. Chemical Engineering Transactions. Milano, Italy: AIDIC Servizi S.r.l., 2013. s. 469-474. ISBN: 978-88-95608-26- 6. ISSN: 1974- 9791.
  Detail

• 2012

  TUREK, V.; BĚLOHRADSKÝ, P.; JEGLA, Z. Geometry Optimization of a Gas Preheater Inlet Region - A Case Study. Chemical Engineering Transactions, 2012, roč. 29, č. 2, s. 1339-1344. ISSN: 1974- 9791.
  Detail

• 2011

  TUREK, V.; HÁJEK, J.; JEGLA, Z.; STEHLÍK, P. Optimum design of fluid distribution systems in heat exchangers. Asia- Pacific Journal of Chemical Engineering, 2011, roč. 6, č. 5, s. 750-759. ISSN: 1932- 2143.
  Detail

*) Citace publikací se generují jednou za 24 hodin.