Publikace

• 2025

  VAVERKA, J.; BURŠA, J. A modification of Holzapfel-Ogden hyperelastic model of myocardium better describing its passive mechanical behavior. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2025, roč. 111, č. MAY-JUN, ISSN: 0997-7538.
  Detail | WWW | Plný text v Digitální knihovně

• 2024

  NAVRÁTIL, J.; KRATOCHVÍLOVÁ, M.; RAUDENSKÁ, M.; BALVAN, J.; VIČAR, T.; PETRLÁKOVÁ, K.; SUZUKI, K.; JADRNÁ, L.; BURŠA, J.; KRÄTER, M.; KYOOHYUN, K.; MASAŘÍK, M.; GUMULEC, J. Long-term zinc treatment alters the mechanical properties and metabolism of prostate cancer cells. Cancer Cell International, 2024, roč. 24, č. 1, s. 313 ( s.)ISSN: 1475-2867.
  Detail | WWW | Plný text v Digitální knihovně

  FISCHER, J.; HEIDROVÁ, A.; HERMANOVÁ, M.; BEDNAŘÍK, Z.; JOUKAL, M.; BURŠA, J. Structural parameters defining distribution of collagen fiber directions in human carotid arteries. Journal of the mechanical behavior of biomedical materials, 2024, roč. 153, č. 5, s. 106494-1 (106494-9 s.)ISSN: 1751-6161.
  Detail | WWW

  JAGOŠ, J.; KOHÚT, J.; NOVOTNÝ, T.; KŘIVKA, T.; HÁJEK, P.; FORMÁNEK, M.; LISICKÝ, O.; BURŠA, J. In silico hemodynamical simulations show additional benefits of artery wall softening induced by antihypertensive drugs. COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE, 2024, roč. 245, č. 2024, s. 108016-1 (108016-10 s.)ISSN: 1872-7565.
  Detail | WWW

  SKÁCEL, P.; BURŠA, J. Need for transverse strain data for fitting constitutive models of arterial tissue to uniaxial tests. Journal of the mechanical behavior of biomedical materials, 2024, roč. 150, č. 150, s. 106194-1 (106194-14 s.)ISSN: 1751-6161.
  Detail | WWW

• 2023

  FISCHER, J.; TURČANOVÁ, M.; MAN, V.; HERMANOVÁ, M.; BEDNAŘÍK, Z.; BURŠA, J. Importance of experimental evaluation of structural parameters for constitutive modelling of aorta. Journal of the mechanical behavior of biomedical materials, 2023, roč. 138, č. 2, s. 105615-1 (105615-8 s.)ISSN: 1751-6161.
  Detail | WWW

  TURČANOVÁ, M.; FISCHER, J.; HERMANOVÁ, M.; BEDNAŘÍK, Z.; SKÁCEL, P.; BURŠA, J. Biaxial stretch can overcome discrepancy between global and local orientations of wavy collagen fibres. JOURNAL OF BIOMECHANICS, 2023, roč. 161, č. 12, s. 1-8. ISSN: 0021-9290.
  Detail | WWW | Plný text v Digitální knihovně

  BURŠA, J.; HRUBANOVÁ, A.; SKÁCEL, P.; FISCHER, J.; TURČANOVÁ, M.; LISICKÝ, O. ANISOTROPY OF SOFT BIOLOGICAL TISSUES AND ITS CONSIDERATION IN CONSTITUTIVE MODELS OF ARTERIES. ENGINEERING MECHANICS 2023 29th INTERNATIONAL CONFERENCE. Engineering Mechanics .... Milovy: Institute of Thermomechanics AS CR, v.v.i., 2023. s. 17-26. ISBN: 978-80-87012-84-0. ISSN: 1805-8248.
  Detail | WWW

  FISCHER, J.; TURČANOVÁ, M.; MAN, V.; HERMANOVÁ, M.; BEDNAŘÍK, Z.; BURŠA, J. IMPORTANCE OF STRUCTURAL PARAMETERS IN CONSTITUTIVE MODELS OF AORTA. ESB 2023 BOOK OF ABSTRACTS. Maastricht: ESB, 2023.
  Detail | WWW

  VAVERKA, J.; HRUBANOVÁ, A.; BURŠA, J. A NEW HYPERELASTIC MODEL FOR HUMAN MYOCARDIUM. ESB 2023 BOOK OF ABSTRACTS. Maastricht: ESB, 2023.
  Detail | WWW

  JAGOŠ, J.; SCHWARZ, D.; POLZER, S.; BURŠA, J. Effect of aortic bifurcation geometry on pressure and peak wall stress in abdominal aorta: Fluid-structure interaction study. MEDICAL ENGINEERING & PHYSICS, 2023, roč. 118, č. 08, s. 104014-1 (104014-8 s.)ISSN: 1873-4030.
  Detail | WWW

  TURČANOVÁ, M.; FISCHER, J.; HERMANOVÁ, M.; BEDNAŘÍK, Z.; BURŠA, J. BIAXIAL STRETCH CAN HELP IN CORRECT INTERPRETATION OF COLLAGEN FIBRE ORIENTATION HISTOGRAMS. ESB 2023 BOOK OF ABSTRACTS. Maastricht: ESB, 2023.
  Detail | WWW

  HRUBANOVÁ, A.; BEDNAŘÍK, Z.; KUBÍČEK, L.; BURŠA, J. MECHANICAL PROPERTIES OF DIFFERENT TISSUES OF CAROTID ATHEROMA: EXPERIMENTAL APPROACH. ESB 2023 BOOK OF ABSTRACTS. Maastricht: 2023.
  Detail | WWW

  JAGOŠ, J.; KOHÚT, J.; NOVOTNÝ, T.; KŘIVKA, T.; HÁJEK, P.; FORMÁNEK, M.; BURŠA, J. IN SILICO HEMODYNAMICAL SIMULATIONS SHOW SECONDARY BENEFITS OF ANTIHYPERTENSIVE DRUGS. ESB 2023 BOOK OF ABSTRACTS. Maastricht: 2023.
  Detail | WWW

  KOHÚT, J.; JAGOŠ, J.; FORMÁNEK, M.; BURŠA, J. VARIABLE ROTATIONAL SPEED SUBSTANTIALLY REDUCE THE RATE OF HEMOLYSIS WITHIN IN-HOUSE ROLLER PUMP. ESB 2023 BOOK OF ABSTRACTS. Maastricht: 2023.
  Detail | WWW

  JADRNÁ, L.; GUMULEC, J.; BURŠA, J. CHANGES IN CELLULAR STIFFNESS RELATED TO CANCER-INDUCED CYTOSKELETON REORGANIZATION. ESB 2023 BOOK OF ABSTRACTS. Maastricht: ESB, 2023.
  Detail | WWW

  JADRNÁ, L.; ZUMBERG, I.; LISICKÝ, O.; JAGOŠ, J.; ČMIEL, V.; BURŠA, J. MECHANICAL RESPONSE OF ENDOTHELIAL CELLS TO SHEAR FLOW AS POSSIBLE MARKER IN DEVELOPMENT OF ATHEROSCLEROSIS. ESB 2023 BOOK OF ABSTRACTS. Maastricht: ESB, 2023.
  Detail | WWW

• 2022

  SKÁCEL, P.; BURŠA, J. Poisson's ratio and compressibility of arterial wall-Improved experimental data reject auxetic behaviour. Journal of the mechanical behavior of biomedical materials, 2022, roč. 131, č. 131, s. 105229-1 (105229-11 s.)ISSN: 1751-6161.
  Detail | WWW

  LISICKÝ, O.; AVRIL, S.; EYDAN, B.; PIERRAT, B.; BURŠA, J. Evaluation of image registration for measuring deformation fields in soft tissue mechanics. Strain, 2022, roč. 58, č. 3, s. 1-12. ISSN: 1475-1305.
  Detail | WWW

  JAGOŠ, J.; KOHÚT, J.; KOHÚT, J.; FORMÁNEK, M.; BURŠA, J. ROLLER PUMP CONTROLLED BY NEURAL NETWORK: EXPERIMENTAL STUDY UNDER PHYSIOLOGICAL CONDITIONS. CMBE22 7th International Conference on Computational & Mathematical Biomedical Engineering. 7th International Conference on Computational and Mathematical Biomedical Engineering – CMBE2021. Cardiff, United Kingdom: Computational and scientific consultancy services Ltd, 2022. s. 389-392. ISBN: 978-0-9562914-6-2. ISSN: 2227-9385.
  Detail | WWW

  JAKKA, V.; BURŠA, J. Impact of physiological loads of arterial wall on nucleus deformation in endothelial cells: A computational study. COMPUTERS IN BIOLOGY AND MEDICINE, 2022, roč. 143, č. 143, s. 105266-1 (105266-11 s.)ISSN: 0010-4825.
  Detail | WWW

• 2021

  JAKKA, V.; BURŠA, J. Finite Element Simulations of Mechanical Behaviour of Endothelial Cells. BioMed Research International, 2021, roč. 2021, č. 1, s. 1-17. ISSN: 2314-6141.
  Detail | WWW | Plný text v Digitální knihovně

  LISICKÝ, O.; HRUBANOVÁ, A.; STAFFA, R.; VLACHOVSKÝ, R.; BURŠA, J. Constitutive models and failure properties of fibrous tissues of carotid artery atheroma based on their uniaxial testing. JOURNAL OF BIOMECHANICS, 2021, roč. 129, č. 1, s. 110861-1 (110861-8 s.)ISSN: 0021-9290.
  Detail | WWW

  JAGOŠ, J.; KOHÚT, J.; KOTEK, M.; SKÁCEL, P.; BURŠA, J. Influence of Turbulence in Aorta-like Tube: Computational and Experimental Study. Journal of Applied Fluid Mechanics, 2021, roč. 14, č. 5, s. 1411-1420. ISSN: 1735-3645.
  Detail | WWW | Plný text v Digitální knihovně

  TURČANOVÁ, M.; HRTOŇ, M.; DVOŘÁK, P.; NOVÁK, K.; HERMANOVÁ, M.; BEDNAŘÍK, Z.; POLZER, S.; BURŠA, J. Full-Range Optical Imaging of Planar Collagen Fiber Orientation Using Polarized Light Microscopy. BioMed Research International, 2021, roč. 2021, č. 1, s. 1-13. ISSN: 2314-6141.
  Detail | WWW | Plný text v Digitální knihovně

  KOHÚT, J.; JAGOŠ, J.; FORMÁNEK, M.; BURŠA, J. In vitro structured tree model of the peripheral vascular network. PROCEEDINGS OF COMPUTATIONAL MECHANICS 2021. Plzeň: University of West Bohemia, 2021. s. 118-121. ISBN: 978-80-261-1059-0.
  Detail | WWW

  POLZER, S.; MAN, V.; VLACHOVSKÝ, R.; KUBÍČEK, L.; KRACÍK, J.; STAFFA, R.; NOVOTNÝ, T.; BURŠA, J.; RAGHAVAN, M. Failure properties of abdominal aortic aneurysm tissue are orientation dependent. Journal of the mechanical behavior of biomedical materials, 2021, roč. 114, č. 1, s. 1-7. ISSN: 1751-6161.
  Detail | WWW

  LISICKÝ, O.; HRUBANOVÁ, A.; BURŠA, J. Interpretation of Experimental Data is Substantial for Constitutive Characterization of Arterial Tissue. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 2021, roč. 143, č. 10, s. 104501-1 (104501-6 s.)ISSN: 0148-0731.
  Detail | WWW

• 2020

  VAVERKA, J.; MOUDR, J.; LOKAJ, P.; BURŠA, J.; PÁSEK, M. Impact of Decreased Transmural Conduction Velocity on the Function of the Human Left Ventricle: A Simulation Study. BioMed Research International, 2020, roč. 2020, č. 1, s. 1-11. ISSN: 2314-6133.
  Detail | WWW | Plný text v Digitální knihovně

  POLZER, S.; GASSER, T.; VLACHOVSKÝ, R.; KUBÍČEK, L.; LAMBERT, L.; MAN, V.; NOVÁK, K.; SLAŽANSKÝ, M.; BURŠA, J.; STAFFA, R. Biomechanical indices are more sensitive than diameter in predicting rupture of asymptomatic abdominal aortic aneurysms. JOURNAL OF VASCULAR SURGERY, 2020, roč. 71, č. 2, s. 617 (+ s.)ISSN: 0741-5214.
  Detail | WWW

  LISICKÝ, O.; MALÁ, A.; BEDNAŘÍK, Z.; NOVOTNÝ, T.; BURŠA, J. Consideration of stiffness of wall layers is decisive for patient-specific analysis of carotid artery with atheroma. PLOS ONE, 2020, roč. 15, č. 9, s. 1-18. ISSN: 1932-6203.
  Detail | WWW | Plný text v Digitální knihovně

  FISCHER, J.; BURŠA, J. COMPARISON OF QUALITATIVE CRITERIA IN DECISION ON NUMBER OF COLLAGEN FIBRE FAMILIES IN SOFT TISSUES. In ENGINEERING MECHANICS 2020. 2020. s. 134-137. ISBN: 978-80-214-5896-3.
  Detail

  HRUBANOVÁ, A.; LISICKÝ, O.; BARTOŇOVÁ, P.; STAFFA, R.; HERMANOVÁ, M.; VLACHOVSKÝ, R.; BURŠA, J. IMPACT OF FORMALDEHYDE ON MECHANICAL PROPERTIES OF ATHEROSCLEROTIC CAROTID ARTERIES. In ENGINEERING MECHANICS 2020. 2020. s. 210-213. ISBN: 978-80-214-5896-3.
  Detail

  ŠVANCARA, P.; LISICKÝ, O.; JAGOŠ, J.; BURŠA, J. COMPUTATIONAL MODELING OF BLOOD FLOW IN THE BIFURCATION OF HUMAN CAROTID ARTERY. In ENGINEERING MECHANICS 2020. Engineering Mechanics .... 26. 2020. s. 480-483. ISBN: 978-80-214-5896-3. ISSN: 1805-8248.
  Detail

  JAKKA, V.; BURŠA, J. FINITE ELEMENT MODELS OF MECHANICAL BEHAVIOUR OF ENDOTHELIAL CELLS. In Engineering Mechanics 2020. 2020. s. 222-225. ISBN: 978-80-214-5896-3.
  Detail

• 2019

  ŠEDIVÝ, D.; BURŠA, J.; FIALOVÁ, S. Experimental and numerical investigation of flow field in flexible tube. In IOP Conference Series: Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. 2019. s. 1-7. ISSN: 1755-1315.
  Detail | WWW

  SKÁCEL, P.; BURŠA, J. Compressibility of arterial wall – direct measurement and predictions of compressible constitutive models. Journal of the mechanical behavior of biomedical materials, 2019, roč. 90, č. 1, s. 538-546. ISSN: 1751-6161.
  Detail | WWW

  FISCHER, J.; BURŠA, J. COMPARISON OF VARIOUS DISTRIBUTONS USED FOR COLLAGEN FIBRE ORIENTATIONS IN ARTERIAL LAYERS. In ENGINEERING MECHANICS 2019. 2019. s. 113-116. ISBN: 978-80-87012-71-0.
  Detail | WWW

  POLZER, S.; POLIŠENSKÁ, A.; NOVÁK, K.; BURŠA, J. Moderate thickness of lipid core in shoulder region of atherosclerotic plaque determines vulnerable plaque - A parametric study. MEDICAL ENGINEERING & PHYSICS, 2019, roč. 69, č. 7, s. 140-146. ISSN: 1350-4533.
  Detail | WWW

  BURŠA, J.; SLAŽANSKÝ, M. Computational investigation of the impact of assumption of affine deformation on constitutive models of soft tissues. Applied andComputational Mechanics, 2019, roč. 13, č. 2, s. 99-106. ISSN: 1802-680X.
  Detail | WWW

  TURČANOVÁ, M.; HRTOŇ, M.; DVOŘÁK, P.; BURŠA, J. Influnce of Mutual Rotation of Polarizing Filters on Light Intensity Measured with Collagen Fibres. In VipIMAGE 2019. Porto, Portugalsko: Springer, 2019. s. 279-285. ISBN: 978-3-030-32040-9.
  Detail | WWW

  LISICKÝ, O.; MALÁ, A.; BURŠA, J. Influence of Transversal Resolution on Reconstructing Atherosclerotic Plaque Components. In VipIMAGE 2019. Porto, Portugalsko: Springer, 2019. s. 501-508. ISBN: 978-3-030-32039-3.
  Detail | WWW

• 2018

  NOVÁK, K.; POLZER, S.; BURŠA, J. Applicability of simplified computational models in prediction of peak wall stress in abdominal aortic aneurysms. Technology and Health Care, Int. Journal of Health Care Engineering, 2018, roč. 26, č. 1, s. 165-173. ISSN: 0928-7329.
  Detail | WWW

  VAVERKA, J.; BURŠA, J.; ŠUMBERA, J.; PÁSEK, M. Effect of Transmural Differences in Excitation-Contraction Delay and Contraction Velocity on Left Ventricle Isovolumic Contraction: A Simulation Study. BioMed Research International, 2018, roč. 2018, č. 2018, s. 1-10. ISSN: 2314-6141.
  Detail | WWW | Plný text v Digitální knihovně

  ŠEDIVÝ, D.; FIALOVÁ, S.; BURŠA, J. Experimentální a numerická studie proudového pole v elastické trubici. 2018. s. 1-10.
  Detail

  MAN, V.; POLZER, S.; GASSER, T.; NOVOTNÝ, T.; BURŠA, J. Impact of isotropic constitutive descriptions on the predicted peak wall stress in abdominal aortic aneurysms. MEDICAL ENGINEERING & PHYSICS, 2018, roč. 53, č. 1, s. 49-57. ISSN: 1350-4533.
  Detail | WWW

  BANSOD, Y.; JAKKA, V.; BURŠA, J. Bendo-tensegrity model simulates compression test of animal cell. In Engineering Mechanics 2018. 2018. s. 45-48. ISBN: 978-80-86246-88-8.
  Detail | WWW

  BARTOŇOVÁ, P.; POLZER, S.; BURŠA, J. Definition of principal material directions at irregular arterial shapes. In Engineering Mechanics 2018. Engineering Mechanics 2018. 2018. s. 57-60. ISBN: 978-80-86246-88-8. ISSN: 1805-8256.
  Detail | WWW

  BANSOD, Y.; MATSUMOTO, T.; NAGAYAMA, K.; BURŠA, J. A Finite Element Bendo-Tensegrity Model of Eukaryotic Cell. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 2018, roč. 140, č. 10, s. 1-9. ISSN: 0148-0731.
  Detail | WWW

• 2017

  NOVÁK, K.; POLZER, S.; KŘIVKA, T.; VLACHOVSKÝ, R.; STAFFA, R.; KUBÍČEK, L.; LAMBERT, L.; BURŠA, J. Correlation between transversal and orthogonal maximal diameters of abdominal aortic aneurysms and alternative rupture risk predictors. COMPUTERS IN BIOLOGY AND MEDICINE, 2017, roč. 83, č. 3, s. 151-156. ISSN: 0010-4825.
  Detail | WWW

• 2016

  SKÁCEL, P.; BURŠA, J. Poisson's ratio of arterial wall – inconsistency of constitutive models with experimental data. Journal of the mechanical behavior of biomedical materials, 2016, roč. 54, č. 1, s. 316-327. ISSN: 1751-6161.
  Detail | WWW

  FEDOROVA, S.; BURŠA, J. Application of polar elasticity to the problem of pure bending of a thick plate. In ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering. Crete, Greece: National Technical University of Athens, 2016. s. 2162-2171. ISBN: 9786188284401.
  Detail

  Stanislav Polzer, Kamil Novák, Jiří Burša. Feasibility of Incorporating Blood Pressure Distribution into Rupture Risk Assesment of Abdominal Aortic Aneurysm. ESB 2016, Lyon: 2016. s. 1 (1 s.).
  Detail | WWW

  MAN, V.; POLZER, S.; BURŠA, J. Influence of mesh density on calculated extreme stresses in aortic aneurysms. Applied andComputational Mechanics, 2016, roč. 10, č. 2, s. 97-110. ISSN: 1802-680X.
  Detail | WWW | Plný text v Digitální knihovně

  BANSOD, Y.; BURŠA, J. Finite element simulation of mechanical tests with bendo-tensegrity models of smooth muscle cell. Vranovska Ves, Czech Republic.: XXIV Cytoskeletal Club, Veterinary Research Institute, Masaryk University., 2016.
  Detail

  SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. Analysis of Accuracy of Biaxial Tests Based on their Computational Simulations. Strain, 2016, roč. 52, č. 5, s. 424-435. ISSN: 1475-1305.
  Detail

  BURŠA, J.; POLZER, S.; SLAŽANSKÝ, M. Finite element analyses of safety guards. 2016. s. 1-15.
  Detail

• 2015

  POLZER, S.; GASSER, T.; NOVÁK, K.; MAN, V.; TICHÝ, M.; SKÁCEL, P.; BURŠA, J. Structure-based constitutive model can accurately predicts planar biaxial properties of arotic wall tissue. Acta Biomaterialia, 2015, roč. 14, č. 1, s. 133-145. ISSN: 1742-7061.
  Detail

  NOVÁK, K.; POLZER, S.; TICHÝ,M.; BURŠA, J. Automatic Evaluation of Collagen Fiber Directions from Polarized Light Microscopy Images. MICROSCOPY AND MICROANALYSIS, 2015, roč. 21, č. 4, s. 863-875. ISSN: 1431-9276.
  Detail | WWW

  FEDOROVA, S. Computational Modeling of Fiber Composites with Thick Fibers as Homogeneous Structures with Use of Couple Stress Theory. In Design and Analysis of Reinforced Fiber Composites. Pedro V. Marcal, Nobuki Yamagata. 2015. s. 25-47. ISBN: 978-3-319-20007- 1.
  Detail | WWW

  SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. Finite element based parametric study of inaccuracies in mechanical testing of soft tissue. 2015.
  Detail

  FEDOROVA, S.; LASOTA, T.; BURŠA, J. Application of couple- stress theory for description of large strain bending of fibre composites. 2015. s. 148-148.
  Detail | WWW

  SKÁCEL, P.; BURŠA, J. Zkoušky mechanických vlastností gumárenské směsi "I 12175 - 2386727" při cyklické deformaci a vytvoření materiálového modelu. 2015. s. 1-15.
  Detail

  MAN, V.; SKÁCEL, P.; POLZER, S.; ŠEVČÍK, V.; BURŠA, J. PRACTICAL ASPECT OF BIAXIAL TESTING OF VASCULAR TISSUE. Prague: 2015.
  Detail

  SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. ANALYSIS OF ACCURACY OF BIAXIAL TESTS BASED ON COMPUTATIONAL SIMULATIONS. In CMBE15, 4th International Conference on Computational & Mathematical, Biomedical Engineering. Swansea, United- Kingdom: CMBE, Zeta Computational Resources Ltd.Swansea, United- Kingdom, 2015. s. 168-171. ISBN: 978-0-9562914-3- 1.
  Detail

  BANSOD, Y.; BURŠA, J. Continuum-based modeling approaches to cell mechanics. World Academy of Science, Engineering and Technology, 2015, roč. 2, č. 9, s. 1202-1213. ISSN: 1307- 6892.
  Detail

  BANSOD, Y.; BURŠA, J. Computational model of vascular smooth muscle cell. Vranovska Ves, Czech Republic.: XXIII Cytoskeletal Club, Veterinary Research Institute, Masaryk University., 2015.
  Detail

  POLZER, S.; BURŠA, J.; MAN, V. ALGORITHM FOR INTRODUCING RESIDUAL STRESSES INTO FINITE ELEMENT MODELS OF ANEURYSMS. Prague: 2015.
  Detail

• 2014

  BURŠA, J.; BANSOD, Y. Design and applications of prestressed tensegrity structures. In Engineering Mechanics 2014, Book of full texts. Svratka: Czech Society for Mechanics, 2014. s. 30-33. ISBN: 978-80-214-4871-1.
  Detail

  BANSOD, Y.; BURŠA, J. Tensigrity Principle Based Computational Model of Cytoskeleton. In 6th World Conference on Structural Control and Monitoring (6WCSCM). Barcelona, Spain: 6th World Conference on Structural Control and Monitoring (6WCSCM)., 2014. s. 3317-3326. ISBN: 978-84-942844-5- 8.
  Detail

  BANSOD, Y.; NANDANWAR, D.; BURŠA, J. Overview of Tensegrity - I: Basic structures. Engineering Mechanics, 2014, roč. 21, č. 5, s. 355-367. ISSN: 1805- 4633.
  Detail

  BANSOD, Y.; BURŠA, J. Overview of Tensegrity - II: High frequency spheres. Engineering Mechanics, 2014, roč. 21, č. 6, s. 437-449. ISSN: 1805- 4633.
  Detail

  SKÁCEL, P.; BURŠA, J. Comparison of constitutive models of arterial layers with distributed collagen fibre orientations. Acta of Bioengineering and Biomechanics, 2014, roč. 2014, č. 03, s. 47-58. ISSN: 1509-409X.
  Detail | WWW

  BURŠA, J.; POLZER, S. Definice parametrů a analýza vhodnosti použití materiálu pro výrobu ocelových řídítek pro jízdní kola. 2014.
  Detail

  SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. Finite element analyses of biaxial tension testing with different ways of specimen clamping. 2014.
  Detail

  MAN, V.; NOVÁK, K.; POLZER, S.; BURŠA, J. Can Laplace law replace more sophisticated analyses of aortic aneurysms?. Špičák: 2014.
  Detail

  MAN, V.; NOVÁK, K.; POLZER, S.; BURŠA, J. Applicability of simplified models of abdominal aortic aneurysms. Barcelona: 2014.
  Detail

  NOVÁK, K.; POLZER, S.; TICHÝ, M.; BURŠA, J. Automatic evaluation of collagen fibre directions from polarized light microscopy images. 2014. s. 1-2.
  Detail | WWW

  BURŠA, J.; BANSOD, Y. Models of Living Cells on the Basis of Tensegrity Structures. In 6th World Conference on Structural Contral and Monitoring. Barcelona, Spain.: 6th World Conference on Structural Control and Monitoring (6WCSCM)., 2014. s. 140-146. ISBN: 978-84-942844-5- 8.
  Detail

  BANSOD, Y.; BURŠA, J. Tensigrity Models of Mechanical Behaviour of Living Cell. Spicak, Czech Republic.: Computational Mechanics 2013 Conference; University of West Bohemia, Pilsen 2013, 2014.
  Detail

  BANSOD, Y.; BURŠA, J. Computational Model of Cytoskeleton Based on Tensegrity Principle. Vranovska Ves, Czech Republic.: XXII Cytoskeletal Club, Veterinary Research Institute, Masaryk University., 2014.
  Detail

  BANSOD, Y.; BURŠA, J. Computational model of intracelluar structure for simulation of mechanical tests of cells. Barcelona, Spain: 11th World Congress on Computational Mechanics (WCCM)., 2014.
  Detail

  BANSOD, Y.; BURŠA, J. Application of tensegrity principle to Cytoskeleton. Barcelona, Spain: 6th World Conference on Structural Control and Monitoring., 2014.
  Detail

  BANSOD, Y.; BURŠA, J. A Concise Review of Soft Glassy Rheological Model of Cytoskeleton. Engineering Mechanics, 2014, roč. 21, č. 4, s. 279-285. ISSN: 1805- 4633.
  Detail

• 2013

  HOENICKA, M.; SIEGFRIED, S.; BURŠA, J.; HUBER, G.; HOLGER, B.; BIRNBAUM, D.; SCHMID, C. Development of endothelium-denuded human umbilical veins as living scaffolds for tissue-engineered small- calibre vascular grafts. J TISSUE ENG REGEN M, 2013, roč. 7, č. 4, s. 324-336. ISSN: 1932- 6254.
  Detail

  FEDOROVA, S. Computational modelling of fibre- reinforced hyperelastic solids with fibre bending stiffness. Brno: 2013. s. 61-61. ISBN: 978-80-214-4739- 4.
  Detail

  POLZER, S.; GASSER, T.; BURŠA, J.; STAFFA, R.; VLACHOVSKÝ, J.; MAN, V.; SKÁCEL, P. Importance of material model in wall stress prediction in abdominal aortic aneurysms. MEDICAL ENGINEERING & PHYSICS, 2013, roč. 35, č. 4, s. 1282-1289. ISSN: 1350- 4533.
  Detail

  POLZER, S.; BURŠA, J.; GASSER, T.; STAFFA, R.; VLACHOVSKÝ, R. A numerical implementation to predict residual strains from the homogeneous stress hypothesis with application to abdominal aortic aneurysms. ANNALS OF BIOMEDICAL ENGINEERING, 2013, roč. 41, č. 7, s. 1516-1527. ISSN: 0090- 6964.
  Detail

  POLZER, S.; GASSER, T.; FORSELL, C.; DRUCKMÜLLEROVÁ, H.; TICHÝ, M.; STAFFA, R.; VLACHOVSKÝ, R.; BURŠA, J. Automatic Identification and Validation of Planar Collagen Organization in the Aorta Wall with Application to Abdominal Aortic Aneurysm. MICROSCOPY AND MICROANALYSIS, 2013, roč. 19, č. 6, s. 1395-1404. ISSN: 1431- 9276.
  Detail

  VERKERKE, G.; VAN DER HOUWEN, E.; BROEKHUIS, A.; BURŠA, J.; CATAPANO, G.; MCCULLAGH, P.; MOTTAGHY, K.; NIEDERER, P.; REILLY, R.; ROGALEWICZ, V.; SEGERS, P.; VERDONSCHOT, N. Science versus design; comparable, contrastive or conducive?. Journal of the mechanical behavior of biomedical materials, 2013, roč. 41, č. 7, s. 1516-1527. ISSN: 1751- 6161.
  Detail

  SKÁCEL, P.; BURŠA, J. Numerical implementation of constitutive model for arterial layers with distributed collagen fibre orientations. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 2013, roč. 2014, č. 01, s. 1-13. ISSN: 1025-5842.
  Detail | WWW

  MAN, V.; STAFFA, R.; BURŠA, J. The maximum stresses in aortic aneurysms calculated on the dependence of mesh density. BOOK OF EXTENDED ABSTRACTS 29th conference with international participation Computational Mechanics 2013. Plzeň, Czech Republic: University of West Bohemia, 2013. s. 79-80. ISBN: 978-80-261-0282- 3.
  Detail

• 2012

  POLZER, S.; BURŠA, J. Simulation of residual stresses (strains) in arteries. In IFMBE Proceedings, Volume 37. Budapest: Springer, 2012. s. 454-457. ISBN: 978-3-642-23507- 8.
  Detail

  BURŠA, J.; HOLATA, J.; LEBIŠ, R. Tensegrity finite element models of mechanical tests of individual cells. Technology and Health Care, Int. Journal of Health Care Engineering, 2012, roč. 20, č. 2, s. 135-150. ISSN: 0928- 7329.
  Detail

  LASOTA, T.; BURŠA, J.; FEDOROVA, S. Constitutive equations and finite element formulation for anisotropic hyperelastic composites based on constrained Cosserat continuum. In ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e- Book Full Papers. Vienna: Elsevier, 2012. s. 3379-3389. ISBN: 978-3-9502481-9- 7.
  Detail

  JANÍČEK, P.; BURŠA, J. Characteristics of Science and Scientific Activities: Considerations about What Is and What Is Not Scientific. Journal of Mechanics Engineering and Automation, 2012, roč. 2, č. 9, s. 573-583. ISSN: 2159- 5275.
  Detail

  FEDOROVA, S.; LASOTA, T.; BURŠA, J.; SKÁCEL, P. Experimental verification of a constitutive model of fibre composite with hyperelastic matrix. In EAN Proceedings 50th annual conference on experimental stress analysis. Tábor: CTU Prague, 2012. s. 65-72. ISBN: 978-80-01-05060- 6.
  Detail

  POLZER, S.; GASSER, T.; MARKERT, B.; BURŠA, J.; SKÁCEL, P. Impact of poroelasticity of intraluminal thrombus on wall stress of abdominal aortic aneurysms. BIOMED ENG ONLINE, 2012, roč. 11, č. 62, s. 1-13. ISSN: 1475- 925X.
  Detail

• 2011

  SKÁCEL, P.; BURŠA, J. Material parameter identification of arterial wall layers from homogenized stress- strain data. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 2011, roč. 14, č. 01, s. 33-41. ISSN: 1025- 5842.
  Detail

  LASOTA, T.; BURŠA, J. Simulation of mechanical tests of composite material using anisotropic hyperelastic constitutive models. Engineering Mechanics, 2011, roč. 18, č. 1, s. 23-32. ISSN: 1802- 1484.
  Detail

  JANÍČEK, P.; BURŠA, J. Characteristics of science and scientific activities; Considerations about what is and what is not scientific. In Engineering Mechanics 2011; Book of full texts. 1. Prague: Institute of Thermomechanics - Academy of Sciences of the Czech Republic - Prague, 2011. s. 25-32. ISBN: 978-80-87012-33- 8.
  Detail

  ČECH, V.; JANEČEK, P.; LASOTA, T.; BURŠA, J. A fiber-bundle pull-out test for surface-modified glass fibers in GF/ polyester composite. COMPOSITE INTERFACES, 2011, roč. 18, č. 4, s. 309-322. ISSN: 0927- 6440.
  Detail

  POLZER, S.; BURŠA, J.; SWEDENBORG, J.; GASSER, T. The impact of Intra- luminal Thrombus failure on the mechanical stress in the wall of Abdominal Aortic Aneurysms. EUROPEAN JOURNAL OF VASCULAR AND ENDOVASCULAR SURGERY, 2011, roč. 41, č. 4, s. 467-473. ISSN: 1078- 5884.
  Detail

• 2010

  BURŠA, J.; MUCHA, P.; SKÁCEL, P. Finite element model of abdominal aortic aneurysm. In IFMBE Proceedings. Munich, Germany: Springer, 2010. s. 185-188. ISBN: 978-3-642-03897- 6.
  Detail

  DĚTÁK, M.; BURŠA, J.; ZEMÁNEK, M. Influence of geometric simplifications on stresses and strains in aneurysm model. In IFMBE Proceedings. Munich, Germany: Springer, 2010. s. 529-532. ISBN: 978-3-642-03897- 6.
  Detail

  POLZER, S.; BURŠA, J. poroelastic model of intraluminal thrombus in FEA of aortic aneurysm. In 6th world congress of biomechanics. singapore: springer, 2010. s. 763-767. ISBN: 978-3-642-14514- 8.
  Detail

  POLZER, S.; BURŠA, J. MODEL SIMPLIFICATION AND BOUNDARY CONDITIONS OF ABDOMINAL AORTIC ANEURYSM. In Engineering mechanics 2010. 2010. s. 270-279. ISBN: 978-80-87012-26- 0.
  Detail

  POLZER, S.; BURŠA, J. FEA of prestressed abdominal aortic aneurysm. In Human biomechanics 2010. 2010. s. 109-110. ISBN: 978-80-87012-26- 0.
  Detail

• 2009

  BURŠA, J.; FUIS, V. Finite element simulation of mechanical tests of individual cells. In IFMBE Proceedings. Munich, Germany: Springer, 2009. s. 16-19. ISBN: 978-3-642-03897- 6.
  Detail

  BURŠA, J.; JANÍČEK, P. Systemic approach to modelling of constitutive behaviour of various types of matter. Part I - basic and simple constitutive models. Engineering Mechanics, 2009, roč. 16, č. 4, s. 1-15. ISSN: 1802- 1484.
  Detail

  LASOTA, T.; BURŠA, J. Comparison of experiment and simulation of tension and bending tests using anisotropic hyperelastic model. BOOK OF EXTENDED ABSTRACTS. Plzeň 2009: Západočeská univerzita, 2009. s. 1-2. ISBN: 978-80-7043-824- 4.
  Detail

  ZEMÁNEK, M.; BURŠA, J.; DĚTÁK, M. Biaxial tension tests with soft tissues of arterial wall. Engineering Mechanics, 2009, roč. 16, č. 1, s. 3-12. ISSN: 1802- 1484.
  Detail

  BURŠA, J.; JANÍČEK, P. Systemic approach to modelling of constitutive behaviour of various types of matter. Part II - combined constitutive models in solid mechanics. Engineering Mechanics, 2009, roč. 16, č. 5, s. 1-17. ISSN: 1802- 1484.
  Detail

• 2007

  LASOTA, T.; BURŠA, J. Návrh testování elastomerů a MKP výpočet koncovky klimatizačního vedení. In Konference diplomových prací 2007. Brno: VUT, 2007. s. 1-5. ISBN: 978-80-214-3406- 6.
  Detail

  BURŠA, J.; LEBIŠ, R.; HOLATA, J. Tensegrity FE models of mechanical tests of individual cells. In Short Communications of the International Conference on Computatitonal Biomechanics and Biology. Plzeň: University of West Bohemia, 2007. s. 280 ( s.)ISBN: 978-80-7043-607- 3.
  Detail

  BURŠA, J.; ZEMÁNEK, M. Evaluation of Biaxial Tension Tests of Soft Tissues. Technology and Informatics, 2007, roč. 133, č. 1, s. 45-55. ISSN: 0926- 9630.
  Detail

  ZEMÁNEK, M.; BURŠA, J. IDENTIFICATION OF PARAMETERS OF HYPERELASTIC MODELS FROM BIAXIAL TENSION TESTS. In Experimental Stress Analysis. Plzeň: 2007. s. 121-122. ISBN: 978-80-7043-552- 6.
  Detail

  ZEMÁNEK, M.; BURŠA, J. IDENTIFICATION OF PARAMETERS OF CONSTITUTIVE MODELS FOR SOFT TISSUES FROM BIAXIAL TENSION TESTS. In Engineering Mechanics 2007. SVRATKA: Academy od Sciences of the Czech Republic, v.v.i., Prague, 2007. s. 327-328. ISBN: 978-80-87012-06- 2.
  Detail

  BURŠA, J.; JANÍČEK, P. Systemization of Constitutive Models and Identification of their Parameters. In Proceedings of Conference on Modelling of Heterogeneous Materials. Praha: ČVUT Praha, 2007. s. 1 ( s.)
  Detail

• 2006

  JANÍČEK, P., BURŠA, J., FUIS, V. Analysis of Credibility of Results of Solutions to Biomechanical Clinical Problems. In HUMAN BIOMECHANICS 2006. Hrotovice: 2006. s. 110 ( s.)ISBN: 80-214-3232- 2.
  Detail

  IVÁN, L., JANÍČEK, P., JANÍČEK, P., BURŠA, J. Stress analysis in acetabulum aesculap plasmatic sc ceramics- ceramics. In HUMAN BIOMECHANICS 2006. Hrotovice: 2006. s. 108 ( s.)ISBN: 80-214-3232- 2.
  Detail

  BURŠA, J. TENSEGRITY STRUCTURES AND THEIR APPLICATION IN MODELS OF CYTOSKELETON. In Human Biomechanics 2006. Hrotovice: Brno University of Technology, Institute of Solid mechanics, Mechatronics and Biomechanics, 2006. s. 68-69. ISBN: 80-214-3232- 2.
  Detail

  BURŠA, J.; LEBIŠ, R. DOUBLE TENSEGRITY FE MODEL OF CELL USED IN SIMULATION OF ITS INDENTATION TEST. In Human biomechanics 2006. Hrotovice: Brno University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2006. s. 138-139. ISBN: 80-214-3232- 2.
  Detail

  BURŠA, J.; IVÁN, L.; JANÍČEK, P. STRESS ANALYSIS IN ACETABULUM AESCULAP PLASMACUP SC CERAMICS- CERAMICS. In Human Biomechanics 2006. Hrotovice: Brno University of technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2006. s. 108-109. ISBN: 80-214-3232- 2.
  Detail

  BURŠA, J. Human Biomechanics 2006. Hrotovice: ČSB, 2006. s. 1-156. ISBN: 80-214-3232- 2.
  Detail

  BURŠA, J.; LEBIŠ, R. COMPUTATIONAL MODELING OF MECHANICAL BEHAVIOUR OF CELL. In Engineering mechanics 2006. Svratka: Institute of Theoretical and Applied Mechanics, Czech Academy of Sciences, 2006. s. 216-217. ISBN: 80-86246-27- 2.
  Detail

  BURŠA, J.; LEBIŠ, R. Tensegrity FE models of mechanical tests of individual cells. In Abstracts of 5th World Congress of Biomechanics. Munich, Germany: European Society of Biomechanics, 2006. s. CD ( s.)
  Detail

  BURŠA, J.; KUŽELA, P. Significance of cancellous bone orthotropy and non- homogeneity in femoral head. In Abstracts of the 5th world Congress of Biomechanics. Munich, Germany: European Society of Biomechanics, 2006. s. CD ( s.)
  Detail

  BURŠA, J.; MUDRÁK, J.; JANÍČEK, P. Stress concentration in inclined bar and beam shoulders. Inženýrská mechanika - Engineering Mechanics, 2006, roč. 2006 (13), č. 5, s. 329-338. ISSN: 1210- 2717.
  Detail

  BURŠA, J.; LEBIŠ, R.; JANÍČEK, P. FE models of stress- strain states in vascular smooth muscle cell. Technology and Health Care, Int. Journal of Health Care Engineering, 2006, roč. 14, č. 4, 5, s. 311-320. ISSN: 0928- 7329.
  Detail

  BURŠA, J.; RYŠAVÝ, P. STRESS STRAIN ANALYSIS OF ABDOMINAL AORTIC ANEURYSM. In Human Biomechanics 2006. Hrotovice: Brno University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2006. s. 178-179. ISBN: 80-214-3232- 2.
  Detail

• 2005

  RYŠAVÝ P., BURŠA J. Stress-Strain Analysis of Abdominal Aortic Aneurysm. In Proceedings of the 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: VUT Brno, 2005. s. 75 ( s.)ISBN: 80-214-2373- 0.
  Detail

  HANÁKOVÁ, S., BURŠA, J., Krmela, J. VÝPOČTOVÝ MODEL MECHANICKÉHO CHOVÁNÍ KOMPOZITU S ELASTOMEROVOU MATRICÍ. In Proceedings of the 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: 2005. s. 35 ( s.)ISBN: 80-214-2373- 0.
  Detail

  Lebiš, R., BURŠA, J., Janíček, P. MOŽNOSTI MKP VÝPOČTOVÉ SIMULACE ZKOUŠKY PRŮNIKU U ISOLOVANÝCH BUNĚK. In 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: 2005. s. 65 ( s.)ISBN: 80-214-2373- 0.
  Detail

  RYŠAVÝ, P., BURŠA, J., Suškevič, I., Krupa, P. DEFORMAČNĚ- NAPĚŤOVÁ ANALÝZA ANEURYSMATU BŘIŠNÍ AORTY. In 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: 2005. s. 1 ( s.)ISBN: 80-214-2373- 0.
  Detail

  ZEMÁNEK, M., BURŠA, J. ZAŘÍZENÍ PRO DVOJOSÉ TAHOVÉ ZKOUŠKY MĚKKÝCH TKÁNÍ. In 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: 2005. s. 84 ( s.)ISBN: 80-214-2373- 0.
  Detail

  SKÁCEL, P.; BURŠA, J. Computational Modelling of Bimaterial Interface Failure in View of Rubber- Steel Interface. Engineering Mechanics, 2005, roč. 12, č. 2, s. 73-85. ISSN: 1802- 1484.
  Detail

  LEBIŠ, R., BURŠA, J. Vliv tuhosti komponent buňky na výsledky simulace zkoušky průniku. In Engineering Mechanics 2005. Svratka: 2005. s. 195 ( s.)ISBN: 80-85918-93- 5.
  Detail

  BURŠA, J., LEBIŠ, R., RYŠAVÝ, P. COMPUTATIONAL MODELLING OF BEHAVIOUR OF SOFT BIOLOGICAL TISSUES. In IFMBE Proceedings. IFMBE Proceedings. Prague: 2005. s. 1538 ( s.)ISSN: 1727- 1983.
  Detail

  Hanáková, S., BURŠA, J., Krmela, J. VÝPOČTOVÝ MODEL MECHANICKÉHO CHOVÁNÍ KOMPOZITU S ELASTOMEROVOU MATRICÍ. In Nečtiny. 2005. s. 189 ( s.)
  Detail

  JANÍČEK, P.; SKALKA, P.; BURŠA, J.; PEŠLOVÁ, F. Výpočtové modelování deformační stability plechů odporníků elektrických lokomotiv. In Dynamic of Civil Engineering and Transport Structures and Wind Enginering. Žilina: University of Zilina, 2005. s. 136 ( s.)ISBN: 80-8070-382- 5.
  Detail

  SKÁCEL, P., Burša, J. Computational Modelling of Spherical Cavity Behavior in Rubber- like Solids. Materials Science Forum, 2005, roč. 482, č. 1, s. 323 ( s.)ISSN: 0255- 5476.
  Detail

  BURŠA, J., JANÍČEK, P., LEBIŠ, R. COMPUTATIONAL MODELLING OF SMOOTH MUSCLE CELLS. In Engineering Mechanics 2005. Svratka: 2005. s. 69 ( s.)ISBN: 80-85918-93- 5.
  Detail

• 2004

  BURŠA, J.; JANÍČEK, P.; VAJDÁK, M. ACCURACY ESTIMATION OF ELASTICITY MODULI EVALUATED BY FOUR- POINT BENDING. Inženýrská mechanika - Engineering Mechanics, 2004, roč. 11, č. 6, s. 1 ( s.)ISSN: 1210- 2717.
  Detail

  BURŠA, J., JANÍČEK, P., LEBIŠ, R. Biomechanics of smooth muscle cells. In Biomechanics of Man. Plzeň: Západočeská Univerzita Plzeň, 2004. s. 46 ( s.)ISBN: 80-7043-315- 9.
  Detail

• 2003

  BURŠA, J., RYŠAVÝ, P., LEBIŠ, R. Stress- Strain Analysis in Anastomoses of Arteries with Vascular Grafts. In World Congress on Medical Physics and Biomedical Engineering. Sydney, Australia: International Federation of Medical and Biological Engineering, 2003. s. 223:15. 07B ( s.)ISBN: 1-877040-14- 2.
  Detail

  BURŠA, J., JANÍČEK, P. EVALUATION OF MODULI OF ELASTICITY FOR THIN LAYERS. Inženýrská mechanika - Engineering Mechanics, 2003, roč. 10, č. 2, s. 149 ( s.)ISSN: 1210- 2717.
  Detail

  SKÁCEL, P. Computational Simulation and Accuracy Analysis of Unconventional Experimental Method for Equibiaxial Stress- Strain Dependence Investigation of Elastomers. In Experimental Stress Analysis 2003. Milovy, CZ: Czech Society for Mechanics, 2003. s. 91 ( s.)ISBN: 80-214-2314- 5.
  Detail

  BURŠA, J., JANÍČEK, P. SYSTEM APPROACH TO SOLVING PROBLEMS IN BIOMECHANICS OF BLOOD VESSELS. In Mechatronics, Robotics and Biomechanics 2003. Hrotovice, CZ: ÚMTMB, 2003. s. 16 ( s.)
  Detail

• 2002

  JANÍČEK, P., PEŠLOVÁ, F., KUBÍČEK, J., BURŠA, J., FUIS, V., KOTEK, V., FILÍPEK, J., BUMBÁLEK, L., VLK, M., ČEPERA, M. Metodologie určování mechanických charakteristik plazmatických nástřiků korundovo- baddeleyitové keramiky EUCOR. In Inženýrská mechanika. Brno: VUT FSI Brno, 2002. s. 103 ( s.)ISBN: 80-214-2109- 6.
  Detail

  VAJDÁK, M., KNOBLOCH, T., BURŠA, J. Modelování napjatosti ve spojích tepen s cévními náhradami. Acta Mechanica Slovaca, 2002, roč. 2002, č. 1, s. 141 ( s.)ISSN: 1335- 2393.
  Detail

  SKÁCEL, P., BURŠA, J. Computational Stress Simulation of Rubber Twist- test via FEM. In Inženýská mechanika 2002 Engineering Mechanics 2002. Svratka: VUT Brno, 2002. s. 261 ( s.)ISBN: 80-214-2109- 6.
  Detail

  VAJDÁK, M., BURŠA, J. Simulace nelineárně elastických ortotropních vlastností tepny pomocí izotropních konečných prvků. In Inženýrská mechanika 2002 Engineering Mechanics 2002. Svratka, ČR: Institute of Mechanics of Solids, Faculty of Mechanical Engineering, Brno University of Technology, 2002. s. 297 ( s.)ISBN: 80-214-2109- 6.
  Detail

  BURŠA, J. POSOUZENÍ MOŽNOSTI URČOVÁNÍ KOHEZNÍ PEVNOSTI ZKOUŠKOU V KRUTU. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Prague, CZ: UTAM AS CR?, 2002. s. 31 ( s.)ISBN: 80-01-02547- 0.
  Detail

  ČERNÝ, V., BURŠA, J. POSOUZENÍ MOŽNOSTI URČOVÁNÍ KOHEZNÍ PEVNOSTI ZKOUŠKOU V KRUTU. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Prague, CZ: UTAM AS CR?, 2002. s. 31 ( s.)ISBN: 80-01-02547- 0.
  Detail

  SKÁCEL, P., BURŠA, J. Analýza vlivu tření na deformaci pryžového vzorku při zkoušce jednoosým tlakem. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Praha, CZ: UTAM?, 2002. s. 233 ( s.)ISBN: 80-01-02547- 0.
  Detail

  BURŠA, J. URČOVÁNÍ MODULŮ PRUŽNOSTI TENKÝCH VRSTEV. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Praha, CZ: UTAM?, 2002. s. 111 ( s.)ISBN: 80-01-02547- 0.
  Detail

  BURŠA, J. URČOVÁNÍ MODULŮ PRUŽNOSTI TENKÝCH VRSTEV. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Praha, CZ: UTAM?, 2002. s. 111 ( s.)ISBN: 80-01-02547- 0.
  Detail

  JANÍČEK, P., BURŠA, J. URČOVÁNÍ MODULŮ PRUŽNOSTI TENKÝCH VRSTEV. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Praha, CZ: UTAM?, 2002. s. 111 ( s.)ISBN: 80-01-02547- 0.
  Detail

  BURŠA, J. Modelling of stress-strain states in arteries as a pre- requisite for damage prediction. In Seventh International Conference Damage and Fracture Mechanics VII. Kihei, USA: WITPress, Southampton, Boston, 2002. s. 487 ( s.)ISBN: 1-85312-926- 7.
  Detail

  JANÍČEK, P., BURŠA, J. Experimental - computational modelling of adhesion strength in composite materials. In Seventh International Conference Damage and Fracture Mechanics VII. Kihei, USA: WITPress, Southampton, Boston, 2002. s. 403 ( s.)ISBN: 1-85312-926- 7.
  Detail

  JANÍČEK, P., BURŠA, J. Experimental - computational modelling of adhesion strength in composite materials. In Seventh International Conference Damage and Fracture Mechanics VII. Kihei, USA: Witpress, southampton, boston, 2002. s. 403 ( s.)ISBN: 1-85312-926- 7.
  Detail

  VAJDÁK, M., BURŠA, J. EXPERIMENT PLANNING IN EVALUATION OF SOFT TISSUE MECHANICAL CHARACTERISTICS. In Proceedings of the International Conference Biomechanics of Man 2002. Čejkovice, CZ: Charles University in Prague, Faculty of Physical Education and Sport, 2002. s. 286 ( s.)ISBN: 80-86317-23- 4.
  Detail

  BURŠA, J., KNOBLOCH, T. STRESS- STRAIN ANALYSIS IN A CONNECTION OF ARTERY AND VASCULAR GRAFT. In Proceedings of the International Conference Biomechanics of Man 2002. Čejkovice, CZ: Charles University in Prague, Faculty of Physical Education and Sport, 2002. s. 173 ( s.)ISBN: 80-86317-23- 4.
  Detail

  BURŠA, J. Výpočtové modelování deformačně- napjatostních stavů tepen. Acta Mechanica Slovaca, 2002, roč. 2002, č. 1, s. 140 ( s.)ISSN: 1335- 2393.
  Detail

  BURŠA, J. Experimental- Computational analysis of Cohesion Tests. In Inženýrská mechanika 2002 Engineering Mechanics 2002. Svratka, ČR: Institute of Mechanics of Solids, Faculty of Mechanical Engineering, Brno University of Technology, 2002. s. 13 ( s.)ISBN: 80-214-2109- 6.
  Detail

• 2001

  JANÍČEK, P., FUIS, V., PEŠLOVÁ, F., KOTEK, V., REINISCH, M., BURŠA, J. EXPERIMENTAL AND COMPUTATIONAL INVESTIGATION OF ELASTIC CHARACTERISTICS OF POROUS MATERIALS. In Experimentální Analýza Napětí 2001. Praha: Ústav teoretické a aplikované mechaniky AV ČR, 2001. s. 125 ( s.)ISBN: 80-86246-09- 4.
  Detail

  BURŠA, J. Experimental-computational analysis of adhesion and fracture in composite “rubber-steel wire rope”. In Inženýrská mechanika 2001 Engineering Mechanics 2001. Svratka, CZ: IT AS CR Praha, AEM, ISM FSI VUT Brno, ITAM AS CR Praha, 2001. s. 44 ( s.)ISBN: 80-85918-64- 1.
  Detail

  BURŠA, J. Stress- strain analysis of an overlapped connection of artery and vascular graft. In Inženýrská mechanika 2001- EMGINEERING MECHANICS 2001. Svratka, CZ: IT AS CR Praha, AEM, ISM FME BUT Brno, ITAM AS CR Praha, 2001. s. 311 ( s.)ISBN: 80-85918-64- 1.
  Detail

  BURŠA, J. CONSTITUTIVE CHARACTERISTICS OF RUBBER AT NORMAL, HIGH AND LOW TEMPERATURES. Materiálové inžinierstvo, 2001, roč. 8, č. 4, s. 27 ( s.)ISSN: 1335- 0803.
  Detail

  BURŠA, J. EXPERIMENTAL- COMPUTATIONAL MODELLING OF DAMAGE OF STEEL REINFORCED RUBBER COMPOSITE. In Materials Structure and Micromechanics of Fracture. Brno, CZ: Vutium, Brno University of Technology, 2001. s. 22 ( s.)ISBN: 80-214-1892- 3.
  Detail

  BURŠA, J. Experimental- computational Modelling of Damage of Steel reinforced Rubber Composite. In Theoretical and Experimental Problems of Materials Engineering. Púchov: FIT UT Trenčín, Matador Púchov, 2001. s. 18 ( s.)ISBN: 80-968099-5- 4.
  Detail

  BURŠA, J. Mechanical Optimization of Geometry of the System “Artery-Vascular Graft”. In Mechatronics and Robotics. Třešť: IM BUT Brno, MC IT CAS, CC IFToMM, 2001. s. 45 ( s.)ISBN: 80-7204-207- 6.
  Detail

  BURŠA, J. EXPERIMENTÁLNÍ URČOVÁNÍ ELASTICKÝCH PARAMETRŮ PRYŽÍ PŘI RŮZNÝCH TEPLOTÁCH. In Experimentální analýza napětí 2001. Tábor, CZ: FTC CTU Praha, ITAM AS CR Praha, CSM, 2001. s. 25 ( s.)ISBN: 80-86246-09- 4.
  Detail

• 2000

  JANÍČEK, P., FLORIAN, Z., BURŠA, J., PŘIKRYL, K., PELLANT, K., FUIS, V., PÁSEK, M., KRŠEK, P. Biomechanika na Ústavu mechaniky těles FSI VUT v Brně. Inženýrská mechanika - Engineering Mechanics, 2000, roč. 7, č. 6, s. 449 ( s.)ISSN: 1210- 2717.
  Detail

*) Citace publikací se generují jednou za 24 hodin.