Publikace

• 2023

  SNOPIŃSKI, P.; KOTOUL, M.; PETRUŠKA, J.; RUSZ, S.; ŻABA, K.; HILŠER, O. Revealing the strengthening contribution of stacking faults, dislocations and grain boundaries in severely deformed LPBF AlSi10Mg alloy. Scientific Reports, 2023, roč. 13, č. 1, s. 1-16. ISSN: 2045-2322.
  Detail | WWW | Plný text v Digitální knihovně

  HRSTKA, M.; KOTOUL, M.; PROFANT, T. Analysis of effect of domain polarization switching near sharp piezoelectric bi-material notches. In 20th International Conference on Fracture and Damage Mechanics, DM 2022. AIP conference proceedings. AIP Conference Proceedings. Melville, NY, USA: American Institute of Physics Inc., 2023. s. 020004-1 (020004-17 s.)ISBN: 9780735445482. ISSN: 0094-243X.
  Detail | WWW

  ŠEVEČEK, O.; SKALKA, P.; VENSKÝ, J.; KOTOUL, M.; PRÁŠEK, J.; STACHIV, I. Increasing Sensitivity of Mass Detection Using Nonlinear Micro/Nano-Mechanical Resonators. In Proceedings of IEEE Sensors 2023. The Seventh IEEE Conference on SENSORS. Vienna, Austria: Institute of Electrical and Electronics Engineers Inc., 2023. ISBN: 979-8-3503-0387-2. ISSN: 1930-0395.
  Detail | WWW

  VENSKÝ, J.; ŠEVEČEK, O.; SKALKA, P.; STACHIV, I.; KOTOUL, M. Novel approach for mass sensing using non-linear micromechanical resonators. 24th International Scientific Conference APPLIED MECHANICS 2023 Book of Abstracts. Bratislava, Slovakia: SPEKTRUM STU, Slovak university of Technology, 2023. ISBN: 978-80-227-5294-7.
  Detail | WWW

  PROFANT, T.; SLÁDEK, J.; SLÁDEK, V.; KOTOUL, M. Assessment of amplitude factors of asymptotic expansion at crack tip in flexoelectric solid under mode I and II loadings. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2023, roč. 269, č. 1.5.2023, s. 112194-112194. ISSN: 1879-2146.
  Detail | WWW

• 2022

  SNOPIŇSKI, P., APPIAH, A.N.S., HILŠER, O.,KOTOUL, M. Investigation of Microstructure and Mechanical Properties of SLM-Fabricated AlSi10Mg Alloy Post-Processed Using Equal Channel Angular Pressing (ECAP). Materials, 2022, roč. 15, č. 22, s. 7940-7940. ISSN: 1996-1944.
  Detail | WWW

  PROFANT, T.; SLÁDEK, J.; SLÁDEK, V.; KOTOUL, M. Asymptotic solution for interface crack between two materials governed by dipolar gradient elasticity: Amplitude factor evaluation. Theoretical and Applied Fracture Mechanics, 2022, roč. 120, č. 8, s. 103378-103378. ISSN: 0167-8442.
  Detail | WWW

  VENSKÝ, J.; ŠEVEČEK, O.; SKALKA, P.; KOTOUL, M.; STACHIV, I. Mass sensing using micromechanical resonators operating in nonlinear regime. In 2022 20th International Conference on Mechatronics - Mechatronika (ME). Pilsen, Czech Republic: IEEE, 2022. ISBN: 978-1-6654-1040-3.
  Detail | WWW

  STACHIV, I.; MACHŮ, Z.; ŠEVEČEK, O.; JENG, Y.; LI, W.; KOTOUL, M.; PRÁŠEK, J. Achievable accuracy of resonating nanomechanical systems for mass sensing of larger analytes in GDa range. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2022, roč. 224, č. červen, s. 1-15. ISSN: 0020-7403.
  Detail | WWW

  STACHIV, I.; MACHŮ, Z.; ŠEVEČEK, O.; TUHOVČÁK, O.; KOTOUL, M.; JENG, Y. Resolving measurement of large (similar to GDa) chemical/biomolecule complexes with multimode nanomechanical resonators. Sensors and Actuators B: Chemical, 2022, roč. 353, č. 15, s. 1-9. ISSN: 0925-4005.
  Detail | WWW

• 2021

  SKALKA, P.; KOTOUL, M. Determination of Mechanical and Fracture Properties of Silicon Single Crystal from Indentation Experiments and Finite Element Modelling. Materials, 2021, roč. 14, č. 22, s. 1-15. ISSN: 1996-1944.
  Detail | WWW | Plný text v Digitální knihovně

• 2020

  ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T.; HRSTKA, M. Crack kinking out of interface of two orthotropic materials under combined thermal/mechanical loading. Theoretical and Applied Fracture Mechanics, 2020, roč. 105, č. 1, s. 1-18. ISSN: 0167-8442.
  Detail | WWW

  KOTOUL, M.; SKALKA, P.; PROFANT, T.; ŘEHÁK, P.; ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. A novel multiscale approach to brittle fracture of nano/micro-sized components. Fatigue & Fracture of Engineering Materials & Structures, 2020, roč. 43, č. 8, s. 1630-1645. ISSN: 8756-758X.
  Detail | WWW

  MACHŮ, Z.; ŠEVEČEK, O.; HADAŠ, Z.; KOTOUL, M. Modeling of electromechanical response and fracture resistance of multilayer piezoelectric energy harvester with residual stresses. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2020, roč. 31, č. 19, s. 2261-2287. ISSN: 1530-8138.
  Detail | WWW

  ŠEVEČEK, O.; PAPŠÍK, R.; MAJER, Z.; KOTOUL, M. Influence of the cell geometry on the tensile strength of open-cell ceramic foams. In 9th International Conference Materials Structure & Micromechanics of Fracture (MSMF9). Procedia Structural Integrity. Itálie: Elsevier, 2020. s. 553-558. ISSN: 2452-3216.
  Detail | WWW | Plný text v Digitální knihovně

  ŠEVEČEK, O.; HANÁK, J.; MAJER, Z.; DRDLÍK, D.; CHLUP, Z.; KOTOUL, M. Prediction of the ceramic foam structure failure using a detailed finite element model. In Advances in Fracture and Damage Mechanics XVIII. Key Engineering Materials (print). 1. Švýcarsko: Trans Tech Publications Ltd, 2020. s. 222-227. ISBN: 9783035715866. ISSN: 1013-9826.
  Detail | WWW

  KOTOUL, M.; ŠEVEČEK, O.; LOŠÁK, P.; SKALKA, P. FEM analýza OK vodní turbíny s uvažováním zatížení dle CFD výpočtů pro zvolené provozní stavy. Brno: 2020.
  Detail

• 2019

  HRSTKA, M.; PROFANT, T.; KOTOUL, M. Electro-mechanical singularities of piezoelectric bi-material notches and cracks. Engineering Fracture Mechanics, 2019, roč. 216, č. 1, s. 1-23. ISSN: 0013-7944.
  Detail | WWW

  ŠEVEČEK, O.; BERTOLLA, L.; CHLUP, Z.; ŘEHOŘEK, L.; MAJER, Z.; MARCIÁN, P.; KOTOUL, M. Modelling of cracking of the ceramic foam specimen with a central notch under the tensile load. Theoretical and Applied Fracture Mechanics, 2019, roč. 100, č. 1, s. 242-250. ISSN: 0167-8442.
  Detail | WWW

  HRSTKA, M.; KOTOUL, M.; PROFANT, T. Notch Tip Singularities of Elastic Piezoelectric Bi-materials. In 9th International Conference Materials Structure & Micromechanics of Fracture (MSMF9). Procedia Structural Integrity. Procedia Structural Integrity, 2019. s. 419-424. ISSN: 2452-3216.
  Detail | WWW

  KOTOUL, M.; SKALKA, P.; PROFANT, T.; FRIÁK, M.; ŘEHÁK, P.; ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Ab Initio Aided Strain Gradient Elasticity Theory in Prediction of Nanocomponent Fracture. Mechanics of Materials, 2019, roč. 136, č. 9, s. 103074-1 (103074-10 s.)ISSN: 0167-6636.
  Detail | WWW

• 2018

  KOTOUL, M.; PROFANT, T. Asymptotic solution for interface crack between two materials governed by dipolar gradient elasticity. Engineering Fracture Mechanics, 2018, roč. 201, č. 1, s. 80-106. ISSN: 0013-7944.
  Detail | WWW

  KOTOUL, M.; SKALKA, P.; PROFANT, T.; ŘEHÁK, P.; ŠESTÁK, P.; FRIÁK, M. Prediction of the Critical Energy Release Rate of Nanostructured Solids using the Laplacian Version of the Strain Gradient Elasticity Theory. In Advances in Fracture and Damage Mechanics XVII. Key Engineering Materials (CD). Scientific Net, 2018. s. 447-452. ISSN: 1662-9809.
  Detail

  MACHŮ, Z.; ŠEVEČEK, O.; MAJER, Z.; HADAŠ, Z.; KOTOUL, M. Optimization of the electro-mechanical response of the multilayer piezoelectric energy harvester. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. Brno: Brno University of Technolgy, 2018, 2018. s. 143-148. ISBN: 978-80-214-5543-6.
  Detail | WWW

  ŠEVEČEK, O.; MAJER, Z.; MARCIÁN, P.; BERTOLLA, L.; KOTOUL, M. Computational Analysis of Crack-Like Defects Influence on the Open Cell Ceramic Foam Tensile Strength. In Advances in Fracture and Damage Mechanics XVII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2018. s. 271-276. ISBN: 9783035713503. ISSN: 1013-9826.
  Detail | WWW

  MAJER, Z.; ŠEVEČEK, O.; MACHŮ, Z.; ŠTEGNEROVÁ, K.; KOTOUL, M. Optimization of design parameters of fracture resistant piezoelectric vibration energy harvester. In Key Engineering Materials. Key Engineering Materials (print). 774. Trans Tech Publications Ltd, 2018. s. 416-422. ISBN: 9783035713503. ISSN: 1013-9826.
  Detail | WWW

• 2017

  KOTOUL, M.; SKALKA, P.; ŠEVEČEK, O.; BERTOLLA, L.; MERTENS, J.;MARCIÁN, P.; CHAWLA, N. Crack bridging modelling in Bioglass ®based scaffolds reinforced by poly-vinyl alcohol/ microfibrillated cellulose composite coating. Mechanics of Materials, 2017, roč. 110, č. 1, s. 16-28. ISSN: 0167-6636.
  Detail | WWW

  KOTOUL, M.; SKALKA, P. Applicability of the critical energy release rate for predicting the growth of a crack in nanoscale materials applying the strain gradient elasticity theory. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (web). Švýcarsko: Trans Tech Publications Ltd, 2017. s. 185-188. ISBN: 978-3-0357-1168-4. ISSN: 1662-9795.
  Detail | WWW

  ŠEVEČEK, O.; NAVRÁTIL, P.; PAPŠÍK, R.; SKALKA, P.; KOTOUL, M. Influence of the Ceramic Foam Structure Irregularity on the Tensile Response. In Materials Structure and Micromechanics of Fracture VIII. Solid State Phenomena. Švýcarsko: Trans Tech Publications, 2017. s. 161-164. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.
  Detail

  KOTOUL, M.; SKALKA, P. Computational analysis of crack bridging in Bioglass®–based porous scaffolds by using polymer coatings. In Materials Structure and Micromechanics of Fracture VIII. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. s. 325-328. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
  Detail

  ŠEVEČEK, O.; MAJER, Z.; KOTOUL, M. INFLUENCE OF CERAMIC FOAM PARAMETERS ON THE FRACTURE BEHAVIOUR UPON THE TENSILE TEST. In Engineering Mechanics 2017. Engineering mechanics 2014. Praha: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, DOLEJSKOVA 5, PRAGUE 8, 182 00, CZECH REPUBLIC, 2017. s. 862-865. ISBN: 978-80-214-5497-2. ISSN: 1805-8248.
  Detail

  ŠEVEČEK, O.; SKALKA, P.; KOTOUL, M. Modelling of the ceramic foam behaviour upon tensile loading. Greece: 2017. s. 859-860.
  Detail | WWW

  ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Modelling of fracture in brittle solids using FEM and finite fracture mechanics. Greece: 2017. s. 928-929.
  Detail | WWW

  ŠEVEČEK, O.; MAJER, Z.; BERTOLLA, L.; CHLUP, Z.; KOTOUL, M. Fracture-Mechanics Behaviour of Ceramic Foam with Macroscopic Stress Concentrator upon the Tensile Test. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (web). Švýcarsko: Trans Tech Publications, 2017. s. 99-102. ISBN: 978-3-0357-1168-4. ISSN: 1662-9795.
  Detail

• 2016

  KOTOUL, M.; PROFANT, T.; PADĚLEK, P. Plane Asymptotic Interface Crack Solutions in Gradient Elasticity Theory. In Advances in Fracture and Damage Mechanics XV. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2016. s. 151-154. ISBN: 978-3-03835-716-2. ISSN: 1013-9826.
  Detail | WWW

  ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Modelling of edge crack formation and propagation in ceramic laminates using the stress–energy coupled criterion. Engineering Fracture Mechanics, 2016, roč. 167, č. 2016, s. 45-55. ISSN: 0013-7944.
  Detail | WWW

  ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Assessment of crack-related problems in layered ceramics using the finite fracture mechanics and coupled stress-energy criterion. In Procedia Structural Integrity. Procedia Structural Integrity. Itálie: Elsevier, 2016. s. 2014-2021. ISSN: 2452-3216.
  Detail | WWW | Plný text v Digitální knihovně

  SKALKA, P.; NAVRÁTIL, P.; KOTOUL, M. Novel approach to FE solution of crack problems in the Laplacian-based gradient elasticity. Mechanics of Materials, 2016, roč. 95, č. 1, s. 28-48. ISSN: 0167-6636.
  Detail | WWW | Plný text v Digitální knihovně

• 2015

  KOTOUL, M.; SKALKA, P.; DLOUHÝ, I. Crack Bridging Modelling in Bioglass® Based Scaffolds Using Gradient Elasticity Theory. In Advances in Fracture and Damage Mechanics. Key Engineering Materials (print). Pfaffikon, Switzerland: Trans Tech Publications, 2015. s. 105-108. ISSN: 1013-9826.
  Detail | WWW

  Michal Kotoul. Crack path modelling in railway wheel under rolling contact fatigue. Applied andComputational Mechanics, 2015, roč. 9, č. 2, s. 103-126. ISSN: 1802-680X.
  Detail | WWW

  ŠEVEČEK, O.; LEGUILLON, D.; PROFANT, T.; KOTOUL, M. Validity of the Finite Fracture Mechanics based Asymptotic Analysis for Predictions of Crack Deflection in Thin Layers of Ceramic Laminates. In Advances in Fracture and Damage Mechanics XIII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2015. s. 237-240. ISBN: 978-3-03835-235-8. ISSN: 1013-9826.
  Detail

  ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Understanding the edge crack phenomenon in ceramic laminates. Frattura ed Integrita Strutturale, 2015, roč. 9, č. 34, s. 362-370. ISSN: 1971-8993.
  Detail | WWW | Plný text v Digitální knihovně

• 2014

  KOTOUL, M. Viktor Kaplan und sein in Brünn geschaffenes Werk. WASSERWIRTSCHAFT, 2014, roč. 104, č. 6, s. 23-25. ISSN: 0043- 0978.
  Detail

  PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M.; HRSTKA, M.; MARCIÁN, P. An effect of the first non-singular term of the Williams asymptotic expansion to the stability of the bi- material orthotropic notch. In Materials Structure & Micromechanics of Fracture VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. s. 745-748. ISSN: 1013-9826.
  Detail

  DAMBORSKÝ, P.; ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Crack Deflection from the Interface between Two Orthotropic Materials-Effect of Higher Order Terms in Asymptotic Analysis. In Advances in Fracture and Damage Mechanics XII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2014. s. 157-160. ISBN: 978-3-03785-830-1. ISSN: 1013-9826.
  Detail

  ŠEVEČEK, O.; BERMEJO, R.; PROFANT, T.; KOTOUL, M. Influence of the T-stress on the crack bifurcation phenomenon in ceramic laminates. In 20th European Conference on Fracture (ECF 2014). Procedia Materials Science. Procedia Materials Science Volume 3. Trondheim, Norsko: Elsevier, 2014. s. 1062-1067. ISBN: 9781632669094. ISSN: 2211-8128.
  Detail

  HRSTKA, M.; PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M. A Stability Criterion of an Orthotropic Bi-Material Notch Based on the Strain Energy Density. In Engineering Mechanics 2014. 1. Svratka: BUT, 2014. s. 232-235. ISBN: 978-80-214-4871-1.
  Detail

  KLUSÁK, J.; HRSTKA, M.; PROFANT, T.; KREPL, O.; ŠEVEČEK, O.; KOTOUL, M. The influence of the first non-singular stress terms on crack initiation direction in an orthotropic bi-material plate. Theoretical and Applied Fracture Mechanics, 2014, roč. 71, č. 2014, s. 67-75. ISSN: 0167-8442.
  Detail

  DAMBORSKÝ, P.; ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Criterion for crack kinking out of the interface of two orthotropic layers subjected to thermal and mechanical loading. In Materials Structure and Micromechanics of Fracture VII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2014. s. 169-172. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
  Detail

• 2013

  PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M. On the direction of a crack initiated from an orthotropic bi-material notch composed of materials with non-uniform fracture mechanics On the direction of a crack initiated from an orthotropic bi-material notch composed of materials with non- uniform fracture mechanics properties. Key Engineering Materials (print), 2013, roč. 525- 526, č. 1, s. 545-548. ISSN: 1013- 9826.
  Detail

  ŠEVEČEK, O.; BERMEJO, R.; KOTOUL, M. Prediction of the crack bifurcation in layered ceramics with high residual stresses. Engineering Fracture Mechanics, 2013, roč. 2013, č. 108, s. 120-138. ISSN: 0013- 7944.
  Detail

  ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T.; BERMEJO, R. Influence of the residual stresses on the crack deflection in ceramic laminates. 2013.
  Detail

  KLUSÁK, J.; PROFANT, T.; KNÉSL, Z.; KOTOUL, M. The influence of discontinuity and orthotropy of fracture toughness on conditions of fracture initiation in singular stress concentrators. Engineering Fracture Mechanics, 2013, roč. 110, č. 2013, s. 438-447. ISSN: 0013- 7944.
  Detail

  PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; HRSTKA, M.; KOTOUL, M. An energetic criterion for a micro-crack of finite length initiated in orthotropic bi- material notches. Engineering Fracture Mechanics, 2013, roč. 110, č. 2013, s. 396-409. ISSN: 0013- 7944.
  Detail

• 2012

  NAVRÁTIL, P.; SKALKA, P.; DAMBORSKÝ, P.; KOTOUL, M. Crack propagation in railway wheel rim in a case of rectilinear ride. In Crack Path. 2012. s. 1007-1014. ISBN: 9788895940441.
  Detail

  ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T. Effect of higher order asymptotic terms on the competition between crack penetration and debond at a bimaterial interface between aligned orthotropic materials. Engineering Fracture Mechanics, 2012, roč. 80, č. 1, s. 28-51. ISSN: 0013- 7944.
  Detail

  KOTOUL, M.; ŠEVEČEK, O.; PROFANT, T. Modelling of Crack Bifurcation in Laminar Ceramics with Large Compressive Stress. Key Engineering Materials (print), 2012, roč. 488- 489, č. 2012, s. 130-133. ISSN: 1013- 9826.
  Detail

  KLUSÁK, J.; PROFANT, T.; KOTOUL, M. Conditions for crack initiation in an orthotropic bi- material notch. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2012, roč. 2012 (19), č. 4, s. 302-307. ISSN: 1537- 6494.
  Detail

  KLUSÁK, J.; PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. Crack propagation from bi-material notches - matched asymptotic procedure. Key Engineering Materials (print), 2012, roč. 488- 489, č. 2012, s. 416-419. ISSN: 1013- 9826.
  Detail

  ŠEVEČEK, O.; BERMEJO, R.; KOTOUL, M. Crack path prediction in layered ceramics designed with residual stresses. In Proceedings of the 4th International Conference on CRACK PATHS (CP 2012). 2012. s. 87-98. ISBN: 9788895940441.
  Detail

  KOTOUL, M.; ŠEVEČEK, O.; VYSLOUŽIL, T. Crack Growth in Ceramic Laminates with Strong Interfaces and Large Compressive Residual Stresses. Theoretical and Applied Fracture Mechanics, 2012, roč. 2012 (61), č. 1, s. 40-50. ISSN: 0167- 8442.
  Detail

• 2011

  KOTOUL, M.; VYSLOUŽIL, T. Effect of Elastic Mismatch and Anisotropy on Cracking of Brittle Films on Elastic Substrates. Key Engineering Materials, 2011, roč. 465, č. 1, s. 235-238. ISSN: 1013- 9826.
  Detail

  DAMBORSKÝ, P.; PROFANT, T.; KOTOUL, M. STRESS SINGULARITY ANALYSIS OF CRACKS LYING ON THE INTERFACE BETWEEN TWO ORTHOTROPIC MATERIALS. In ENGINEERING MECHANICS. 1. Prague: Institute of Thermomechanics - Academy of Sciences of the Czech Republic - Prague, 2011. s. 103-107. ISBN: 978-80-87012-33- 8.
  Detail

  PROFANT, T.; KLUSÁK, J.; KOTOUL, M. THE ANALYSIS OF THE CRACK INITIATED FROM THE ORTHOTROPIC BI- MATERIAL SHARP NOTCH. In ENGINEERING MECHANICS. 1. Prague: Institute of Thermomechanics - Academy of Sciences of the Czech Republic - Prague, 2011. s. 103-107. ISBN: 978-80-87012-33- 8.
  Detail

  PROFANT, T.; KLUSÁK, J.; KOTOUL, M. Case Criterion of Crack Onset in Orthotropic Bi- Material Notches. Key Engineering Materials, 2011, roč. 465, č. 1, s. 157-160. ISSN: 1013- 9826.
  Detail

• 2010

  PROFANT, T.; KLUSÁK, J.; KOTOUL, M. CONDITIONS FOR CRACK INITIATION IN AN ORTHOTROPIC BI- MATERIAL CORNER DETERMINED BY MEANS OF THE STRAIN ENERGY DENSITY FACTOR. In Multiscaling of Synthetic and Natural Systems with Self- Adaptive Capability. Taipei: National Taiwan University of Science and Technology, 2010. s. 149-152. ISBN: 978-986-02-3909- 6.
  Detail

  KLUSÁK, J.; PROFANT, T.; KOTOUL, M. Determination of the threshold values of orthotropic bi- material notches. Procedia Engineering, 2010, roč. 2, č. 1, s. 1635-1642. ISSN: 1877- 7058.
  Detail

  PROFANT, T.; KLUSÁK, J.; KOTOUL, M. On the crack initiated from the bi- material notch tip. Key Engineering Materials, 2010, roč. 452- 453, č. 1, s. 441-444. ISSN: 1013- 9826.
  Detail

  PROFANT, T.; KLUSÁK, J.; KOTOUL, M. A study of the stability of sharp notches in the orthotropic heterogeneous media. In The Ninth International Conference on Multiaxial Fatigue & Fracture (ICMFF9). 2010. s. 733-740. ISBN: 978-88-95940-31- 1.
  Detail

• 2009

  KOTOUL, M.; ŠEVEČEK, O.; PROFANT, T. Analysis of multiple cracks in thin coating on orthotropic substrate under mechanical and residual stresses. Engineering Fracture Mechanics, 2009, roč. 77, č. 2, s. 229-248. ISSN: 0013- 7944.
  Detail

  KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O.; KLUSÁK, J. Computational model of the transition of crack across the sharp material interface. In 12th International Conference on Fracture. 2009. s. 1-10. ISBN: 9781617382277.
  Detail

  KLUSÁK, J.; PROFANT, T.; KOTOUL, M. Study of stress distribution around an orthotropic bi- material notch tip. Key Engineering Materials (print), 2009, roč. 417- 418, č. 1, s. 385-388. ISSN: 1013- 9826.
  Detail

  PROFANT, T.; KLUSÁK, J.; KOTOUL, M.; KNÉSL, Z. Application of the generalized linear elastic fracture mechanics to NiTi catheter. Brazílie: SBPMat, 2009. s. 1 (1 s.).
  Detail

  KOTOUL, M.; VYSLOUŽIL, T. Numerical modelling of crack propagation and R-curve behaviour in layered Al2O3/ ZrO2 composites. Key Engineering Materials, 2009, roč. 417- 418, č. 1, s. 769-772. ISSN: 1013- 9826.
  Detail

• 2008

  PROFANT, T.; KOTOUL, M. On the inclined surface crack terminating at the orthotropic bimaterial interface. Key Engineering Materials, 2008, roč. 385, č. 1, s. 541-544. ISSN: 1013- 9826.
  Detail

  KOTOUL, M.; POKLUDA, J.; ŠANDERA, P.; DLOUHÝ, I.; CHLUP, Z.; BOCCACCINI, A. Toughening effects quantification in glass matrix composite reinforced by alumina platelets. Acta materialia, 2008, roč. 56, č. 12, s. 2908-2918. ISSN: 1359- 6454.
  Detail

  KLUSÁK, J.; PROFANT, T.; KOTOUL, M. A comparison of two direct methods of generalized stress intesity factor calculations of bi- material notches. Key Engineering Materials (print), 2008, roč. 385, č. 1, s. 409-412. ISSN: 1013- 9826.
  Detail

  PROFANT, T.; KOTOUL, M.; ŠEVEČEK, O. Stronger and weaker singularity of an inclined crack terminating at the orthotropic bimaterial interface. In 17th European conference on fracture. Brno: VITIUM, 2008. s. 170-170. ISBN: 9781617823190.
  Detail

  KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O. Analysis of Multiple Cracks in Thin Coating on Orthotropic Substrate. In Multilevel Approach to Fracture of Materials, Components and Structures. 1. Czech Republic: VUTIUM Brno, 2008. s. 170-177. ISBN: 9781617823190.
  Detail

• 2007

  KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O.; KREJČÍŘ, M. Solution methods for general stress concentrators in anisotropic heterogeneous media. Key Engineering Materials (print), 2007, roč. 348- 349, č. 1, s. 677-680. ISSN: 1013- 9826.
  Detail

  KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O.; KREJČÍŘ, M. a kol. Modeling of cracks crossing an interface between dissimilar elastic anisotropic materials. Materials Science Forum, 2007, roč. 567, č. 1, s. 17-22. ISSN: 0255- 5476.
  Detail

  ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Řešení problému přemostění trhliny v tenké ortotropní vrstvě s vrcholem na rozhraní ortotropního substrátu. In Applied Mechanics 2007. Ediční středisko VŠB. Ostrava: VŠB Technická universita Ostrava, 2007. s. 207-208. ISBN: 978-80-248-1389- 9.
  Detail

  ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Crack propagation criteria for the crack terminating on the interface of a thin orthotropic layer and an orthotropic substrate. In Engineering Mechanics 2007. Prague: Institute of thermomechanics Academy of science of the Czech Republic, 2007. s. 271-272. ISBN: 978-80-87012-06- 2.
  Detail

  KOTOUL, M.; VYSLOUŽIL, T.; BOCCACCINI, A.; DLOUHÝ, I. Crack growth in glass matrix composite reinforced by long SiC fibres. Theoretical and Applied Fracture Mechanics, 2007, roč. 49, č. x, s. 158-170. ISSN: 0167- 8442.
  Detail

  PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. The Analysis of the Stress and Displacement Field Near the Surface Crack Tip Terminating Perpendicular to the Interface Between Two Orthotropic Materials. Materials Science Forum, 2007, roč. 567, č. 1, s. 137-140. ISSN: 0255- 5476.
  Detail

  PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M.; VYSLOUŽIL, T. Dislocation tri-material solution in the analysis of bridged crack in anisotropic bimaterial half- space. INTERNATIONAL JOURNAL OF FRACTURE, 2007, roč. 147, č. 4, s. 199-217. ISSN: 0376- 9429.
  Detail

  PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. Calculation of k-factor and t- stress for cracks in anisotropic bimaterials. Engineering Fracture Mechanics, 2007, roč. 75, č. 11, s. 3707-3726. ISSN: 0013- 7944.
  Detail

  KOTOUL, M.; POKLUDA, J.; ŠANDERA, P.; DLOUHÝ, I.; CHLUP, Z.; BOCCACCINI, A. Experimental and theoretical investigation of fracture in glass matrix composites reinforced by alumina platelets. In Fracture Mechanics of Concrete and Concrete Structures. Taylor& Francis, 2007. s. 1691-1698. ISBN: 978-0-415-44066- 0.
  Detail

• 2006

  PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. ANALÝZA SINGULARITY NAPĚTÍ U TRHLIN NA ROZHRANÍ DVOU ORTOTROPNÍCH MATERIÁLŮ. In Computational Mechanics. Hrad Nečtiny: University of West Bohemia in Pilsen, 2006. s. 483-490. ISBN: 80-7043-477- 5.
  Detail

  KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O. Calculation of K-factor and T- stress for crack at anisotropic bimaterials. In Fracture of Nano and Engineering Materials and Structures. Holandsko: Springer, 2006. s. 879-879. ISBN: 1-4020-4971- 4.
  Detail

  PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. STRESS SINGULARITY AT AN SEMI- INFINITE CRACK PERPENDICULAR TO THE INTERFACE BETWEEN TWO ORTHOTROPIC MATERIALS. In Dynamika tuhých a deformovatelných těles 2006. Ústí nad Labmem: Univerzita J.E. Purkyně, 2006. s. 175-182. ISBN: 80-7044-782- 6.
  Detail

  PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. Stress field analisys near the semi- infinite crack tip terminating to the interface between two orthotropic materials. In Engineering Mechanics 2006. první. Svratka: Academy of Sciences of the Czech Republic, Prague, 2006. s. 304-305. ISBN: 80-86246-27- 2.
  Detail

  ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Problematika přechodu trhlin přes rozhraní dvou anisotropních materiálů. In Computational mechanics 2006. Nečtiny: University of West Bohemia, 2006. s. 601-608. ISBN: 80-7043-477- 5.
  Detail

  KOTOUL, M., VYSLOUŽIL, T., DLOUHÝ, I. Stable crack growth modelling in unidirectional fibre- reinforced britle matrix composites. In ESMC2006. Budapest: Budapest University of Technology and Economics, 2006. s. 125 ( s.)ISBN: 9638724404.
  Detail

  PROFANT, T.; KOTOUL, M.; ŠEVEČEK, O. Analysis of Edge Bridged Crack in Bimaterial Anisotropic Half- Space. Key Engineering Materials (print), 2006, roč. 324, č. 9, s. 1143-1143. ISSN: 1013- 9826.
  Detail

  ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T. Výpočet zobecněného součinitele intensity napětí pro trhlinu kolmou na rozhraní dvou anisotropních materiálů. In Aplikovaná mechanika 2006. Srní: 2006. s. 93-94. ISBN: 80-7043-441- 4.
  Detail

  ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T. Konstrukce fundamentálního řešení pro dislokaci v anisotropním bimateriálovém tělese pomocí MKP. In Engineering mechanics 2006. Svratka: 2006. s. 350-351. ISBN: 80-86246-27- 2.
  Detail

• 2005

  KOTOUL, M.; VYSLOUŽIL, T.; DLOUHÝ, I. Modelling the R-curve behaviour in chevron- notched specimen using weight functions. In Advances in Fracture and Damage Mechanics IV. Eastleigh, England: EC, Ltd., UK, 2005. s. 217 ( s.)ISBN: 0-9547783-1- 6.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J.; KOTOUL, M. On the Crack Tip Shielding in Particle Reinforced Composites. In 4th International Conference on Fracture and Damage Mechanics. 1. Mallorca, Spain: 2005. s. 509-512. ISBN: 0-9547783-1- 6.
  Detail

  ŠEVEČEK, O.; KOTOUL, M. Řešení obecných koncentrátorů napětí v anisotropních prostředích. In Víceúrovňový design pokrokových materiálů 2006. Brno: 2005. s. 215-222. ISBN: 80-239-6145- 4.
  Detail

  PROFANT, T.; KOTOUL, M. Effect of thermal expansion mismatches of matrix and fibres on microcracking of brittle matrix composites. In Aplikovaná mechanika 2005. Brno: ÚMTMB FSI v Brně, 2005. s. 85-86. ISBN: 80-214-2373- 0.
  Detail

  PROFANT, T., KOTOUL, M. On crack path in fibres- reinforced ceramic composites. Materials Science Forum, 2005, roč. 482, č. 3, s. 299 ( s.)ISSN: 0255- 5476.
  Detail

  KOTOUL, M.; DLOUHÝ, I. Quantification of toughness increase due to metal particles in glass matrix composites. In Active Materials, Nanoscale Materials, Composites, Glass and Fundamentals. Fracture Mechanics of Ceramics. New York: Springer, 2005. s. 245-262. ISBN: 0-387-24134- 5.
  Detail

  T.PROFANT, M. KOTOUL. On collinear microcrack- inclusion arrays interaction and related problems. Theoretical and Applied Fracture Mechanics, 2005, roč. 44, č. 11, s. 297 ( s.)ISSN: 0167- 8442.
  Detail | WWW

• 2004

  PROFANT, T.; KOTOUL, M. Periodická řada kolineárních mikrotrhlin oddělených kruhovými elastickými inkluzemi. Část II. Aplikace techniky spojitě rozdělených dislokací. Engineering Mechanics, 2004, roč. 11, č. 4, s. 259-289. ISSN: 1802- 1484.
  Detail

  PROFANT, T.; KOTOUL, M. Model porušení v kompozitech s křehkou matricí při působení teplotních napětí. In Computational mechanics 2004. Plzen: Západočeská universita, 2004. s. 413-420. ISBN: 80-7043-314- 0.
  Detail

  KOTOUL, M., DLOUHÝ, I., VYSLOUŽIL, T. Crack bridging and trapping in borosilicate matrix composites with distributed metal particles. In ECF15. Stockholm: 2004. s. 185 ( s.)
  Detail

  KOTOUL, M., DLOUHÝ, I. Metal particles constraint in glass matrix composites and its impact on fracture toughness enhancement. Materials Science and Engineering A, 2004, roč. 387- 389, č. 1- 2, s. 404 ( s.)ISSN: 0921- 5093.
  Detail

  KOTOUL, M.; PROFANT, T.; VYSLOUŽIL, T. Modely mechanismů pro zvyšování houževnatosti kompozitů s křehkou matricí. In Křehký lom 2004. Brno: Ústav fyziky materiálů AVČR , Brno, 2004. s. 5-29. ISBN: 80-239-3646- 8.
  Detail

  PROFANT, T.; KOTOUL, M. Periodická řada kolineárních mikrotrhlin oddělených kruhovými elastickými inkluzemi. Část I. Fundamentální řešení pro dislokaci mezi dvěma inkluzemi. Engineering Mechanics, 2004, roč. 11, č. 3, s. 215-238. ISSN: 1802- 1484.
  Detail

• 2003

  KOTOUL, M. Limited frature toughness enhancement due to metal particles embrittlement in glass matrix composites. In Mechanical Behaviour of Materials. Izrael: Kenes International, 2003. s. 17 ( s.)
  Detail

  VYSLOUŽIL, T.; KOTOUL, M. 3D MKP analýza přemostěné trhliny rostoucí z šípového vrubu vzorku při tříbodovém ohybu. In Engineering Mechanics 2003. Praha: Ústav teoretické a aplikované mechaniky AVČR, 2003. s. 392 ( s.)ISBN: 80-86246-18- 3.
  Detail

  PROFANT, T., KOTOUL, M. Study of interaction of an array of collinear microcracks with periodic array of inclusions. Key Engineering Materials (print), 2003, roč. 251, č. 8, s. 279 ( s.)ISSN: 1013- 9826.
  Detail

  PROFANT, T., KOTOUL, M. On the interaction of an array of collinear microcracks with periodic array of inclusions. Key Engineering Materials (print), 2003, roč. 251, č. 8, s. 279 ( s.)ISSN: 1013- 9826.
  Detail

  KOTOUL, M., VYSLOUŽIL, T., VRBKA, J. Analysis of the transition from crack bridging to crack trapping in brittle matrix composites toughened by ductile phase. Engineering Mechanics, 2003, roč. 10, č. 3, s. 219 ( s.)ISSN: 1802- 1484.
  Detail

  KOTOUL, M., VRBKA, J. Crack bridging and trapping mechanisms used to toughen brittle matrix composite. Theoretical and Applied Fracture Mechanics, 2003, roč. 40, č. 1, s. 23 ( s.)ISSN: 0167- 8442.
  Detail | WWW

• 2002

  KOTOUL, M. Konstitutivní modely transformačně zpevněné a tvárnými částicemi zpevněné keramiky při vlivu mikrotrhlin. In Inženýrská mechanika 2002. Brno: Institute of Mechanics of Solids, Faculty of Mechanical Engineering, Brno University of Technology, 2002. s. 133 ( s.)ISBN: 80-214-2109- 6.
  Detail

  KOTOUL, M. Metoda spojitě rozložených dislokací v lomové mechanice heterogenních materiálů. Vědecké spisy Vysokého učení technického v Brně Edice Habilitační a inaugurační spisy, 2002, roč. 95, č. 9, s. 5 ( s.)ISSN: 1213- 418X.
  Detail

  KOTOUL, M. Constitutive modelling of cyclic plasticity of metal particulate-reinforced brittle matrix composites under compression- compression loading. Journal of the Mechanics and Physics of Solids, 2002, roč. 50, č. 12, s. 1099 ( s.)ISSN: 0022- 5096.
  Detail

• 2001

  HORSKÝ, J., MAZAL, P., KOTOUL, M. Acoustic Emission Echo by repeated pressure loading of ceramics material. In Acoustic Emission 2001 - International Internet Conference. Brno: VUT v Brně, 2001. s. 47-55. ISBN: 80-214-2008- 1.
  Detail

  HORSKÝ, J., MAZAL, P., KOTOUL, M. Možnosti využití techniky AE k popisu poškození materiálů typu DISAL při zatěžování v tlaku. In Defektoskopie 2002 - sborník příspěvků z 31. mezinárodní konference. Brno: ČNDT, 2001. s. 125 ( s.)ISBN: 80-214-2002- 2.
  Detail

  URBIŠ, R., KOTOUL, M., VRBKA, J. Vliv mechanických parametrů částicových kompozitů na stabilitu trhliny. Inženýrská mechanika - Engineering Mechanics, 2001, roč. 8, č. 3, s. 197 ( s.)ISSN: 1210- 2717.
  Detail

  KOTOUL, M. A micromechanical model of cyclic creep in brittle matrix composites under compressive loading. In Materials Structure & Micromechanics of Fracture. Vutium, Brno University of Technology, Brno: Vutium, Brno University of Technology, 2001. s. 355 ( s.)ISBN: 80-214-1892- 3.
  Detail

  URBIŠ, R., KOTOUL, M., VRBKA, J. Vliv mechanických parametrů částicových kompozitů na stabilitu trhliny. Inženýrská mechanika - Engineering Mechanics, 2001, roč. 8, č. 2, s. 197 ( s.)ISSN: 1210- 2717.
  Detail

  KOTOUL, M. Micromechanical modelling of cyclic creep in brittle matrix composites under compressive loading. In Proc. of 3rd Int. Conf. Materials structure & Micromechanics of Fracture. Brno, Czech Republic: Vutium, Brno University of Technology, 2001. s. 355 ( s.)ISBN: 80-214-1892- 3.
  Detail

  URBIŠ, R., KOTOUL, M. Vliv trojososti napětí v tvárných můstcích trhliny na lomovou houževnatost. In Engineering mechannics 2001. Institute of ThermomechanicsAcademy of Sciences of the Cze: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, 2001. s. 275 ( s.)ISBN: 80-85918-64- 1.
  Detail

  KOTOUL, M. Constitutive modeling of ratchetting of metal particulate- reinforced ceramic matrix composites. Materials Science and Engineering A, 2001, roč. 319, č. 12, s. 657 ( s.)ISSN: 0921- 5093.
  Detail

  URBIŠ, R., KOTOUL, M. Modelling of partial debonding of ductile particles from brittle matrix in crack bridging zone. In Proc. of 3rd Int. Conf. on Materials structure & micromechanics of fracture. Brno, Czech Republic: Vutium, Brno University of Technology, 2001. s. 394 ( s.)ISBN: 80-214-1892- 3.
  Detail

  KOTOUL, M., URBIŠ, R. On the crack stability in metal particulate- reinforced brittle matrix composites. In 10th International Conference on Fracture. Oxford: Elsevier Science, 2001. s. 167 ( s.)ISBN: 0080440428.
  Detail

  KOTOUL, M., URBIŠ, R. On the stability of cracks with bridged kinks. Engineering Fracture Mechanics, 2001, roč. 68, č. 1, s. 89 ( s.)ISSN: 0013- 7944.
  Detail

  KOTOUL, M.; PROFANT, T. Effective toughness for bridged crack interacting with an arbitrary oriented and located microcrack. Mechanics of Materials, 2001, roč. 32, č. 4, s. 203 ( s.)ISSN: 0167- 6636.
  Detail

  URBIŠ, R., KOTOUL, M., VRBKA, J. Parametric study of crack stability in metal paritculate- reinforced ceramic matrix composites. In Contact Mechanics 2001. Wessex, UK: Wessex Institute of Technology, 2001. s. 87 ( s.)ISBN: 1-85312-872-4- 2.
  Detail

  HEGER, J., KOTOUL, M., VYSLOUŽIL, T. FE modelling of particulate composites with brittle matrix under cyclic compression loading. In Materials structure & micromechanics of fracture. Brno, Czech Republic: Vutium, Brno University of Techology, 2001. s. 347 ( s.)ISBN: 80-214-1892- 3.
  Detail

• 2000

  URBIŠ, R., KOTOUL, M. Stabilita trhliny v částicově zpevněných kompozitech. Inženýrská mechanika - Engineering Mechanics, 2000, roč. 7, č. 5, s. 353 ( s.)ISSN: 1210- 2717.
  Detail

  URBIŠ, R., KOTOUL, M. Model šíření trhliny v částicových kompozitech s křehkou matricí. In Engineering Mechanics 2000. Institute of Theoretical and Applied Mechanics, Academy of: 2000. s. 37 ( s.)ISBN: 80-86246-03- 5.
  Detail

• 1999

  KOTOUL, M. A micromechanical constitutive model of cyclic plasticity for brittle composites reinforced by ductile paritcles under compression- compression loading. 1st Canadian Conference on Nonlinear Mechanics. University of Victoria Press, Victoria, Canada: Univerisity of Victoria, 1999. s. 621 ( s.)ISBN: 15-5058-195- 3.
  Detail

*) Citace publikací se generují jednou za 24 hodin.