Publications

• 2024

  JUDAS, J.; ZAPLETAL, J.; ADAM, O.; ŘEHOŘEK, L.; JAN, V. Microstructural stability and precipitate evolution of thermally treated 7075 aluminum alloy fabricated by cold spray. MATERIALS CHARACTERIZATION, 2024, vol. 216, no. 114259, p. 114259-114259. ISSN: 1873-4189.
  Detail | WWW

  RONČÁK, J.; JOZEFOVIČ, P.; MÜLLER, P.; ADAM, O.; JUDAS, J.; DUPÁK, L.; ZAVDOVEEV, A.; JAN, V.; ZOBAČ, M. Thermal stability of electron beam welded AlCoCrFeNi2.1 alloy. Materials Research Express, 2024, vol. 11, no. 9, p. 1-12. ISSN: 2053-1591.
  Detail | WWW | Full text in the Digital Library

  ZÁDĚRA, A.; SOPOUŠEK, J.; BURŠÍK, J.; ČUPERA, J.; BROŽ, P.; JAN, V. Influence of substitution of Cr by Cu on phase equilibria and microstructures in the Fe-Ni-Co-Cr high-entropy alloys. INTERMETALLICS, 2024, vol. 174, no. November, p. 1-10. ISSN: 0966-9795.
  Detail | WWW

• 2023

  SALAMON, D.; BUKVIŠOVÁ, K.; JAN, V.; POTOČEK, M.; ČECHAL, J. Superflux of an organic adlayer towards its local reactive immobilization. Communications Chemistry, 2023, vol. 6, no. 1, ISSN: 2399-3669.
  Detail | WWW | Full text in the Digital Library

  JUDAS, J.; ZAPLETAL, J.; ŘEHOŘEK, L.; JAN, V. Effects of annealing temperature on microstructure and mechanical properties of cold sprayed AA7075. In 10th International Conference on Materials Structure and Micromechanics of Fracture. Procedia Structural Integrity. Elsevier, 2023. p. 160-165. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

• 2022

  ADAM, O.; JAN, V. MECHANICAL ALLOYING OF CUFE IMMISCIBLE ALLOY USING DIFFERENT MILLING CONDITIONS. In 31st International Conference on Metallurgy and Materials, METAL 2022. Ostrava: TANGER Ltd., 2022. p. 669-674. ISBN: 978-80-88365-06-8.
  Detail | WWW

  JUDAS, J.; ZAPLETAL, J.; JAN, V. Extremely low cycle fatigue behaviour of high strength 2024-T351 aluminum alloy. In 31st International Conference on Metallurgy and Materials, METAL 2022. Ostrava: TANGER Ltd., 2022. p. 714-720. ISBN: 978-80-88365-06-8.
  Detail | WWW

  LACOVÁ, A.; ADAM, O.; JAN, V. EFFECT OF Cr AND Ni ELEMENTS ON THE MICROSTRUCTURE AND PROPERTIES OF Cu-Fe-BASED IMMISCIBLE ALLOYS. In 31st International Conference on Metallurgy and Materials, METAL 2022. Ostrava: TANGER Ltd., 2022. p. 733-738. ISBN: 978-80-88365-06-8.
  Detail | WWW

• 2021

  ADAM, O.; JAN, V. Microstructure evolution of Cu-Fe-based immiscible alloys prepared by powder metallurgy. 6th International Conference on Recent Trends in Structural Materials (COMAT 2020) 30th November - 4th December 2020, Pilsen, Czech Republic. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2021. p. 1-6. ISSN: 1757-899X.
  Detail | WWW | Full text in the Digital Library

  MORAVČÍKOVÁ DE ALMEIDA GOUVÊA, L.; KOVACOVA, Z.; KITZMANTEL, M.; NEUBAUER, E.; JAN, V.; DLOUHÝ, I. Influence of Hot Pressing Sintering Temperature on the Properties of Low-Density Al0.5NbTa0.8Ti1.5V0.2Zr Refractory High-Entropy Alloy. Materials Science Forum, 2021, vol. 1016, no. 1016, p. 940-945. ISSN: 1662-9752.
  Detail | WWW

  ADAM, O.; JAN, V.; SPOTZ, Z.; ČUPERA, J.; POUCHLÝ, V. Ultrafine-grained Cu50(FeCo)50 immiscible alloy with excellent thermal stability. MATERIALS CHARACTERIZATION, 2021, vol. 182, no. 111532, p. 111532-111532. ISSN: 1044-5803.
  Detail | WWW

• 2020

  MORAVČÍKOVA DE ALMEIDA GOUVÊA, L.; MORAVČÍK, I.; OMASTA, M.; VESELY, J.; ČÍŽEK, J.; MINÁRIK, P.; ČUPERA, J.; ZÁDĚRA, A.; JAN, V.; DLOUHÝ, I. High-strength Al0.2Co1.5CrFeNi1.5Ti high-entropy alloy produced by powder metallurgy and casting: A comparison of microstructures, mechanical and tribological properties. MATERIALS CHARACTERIZATION, 2020, vol. 159, no. 110046, p. 1-16. ISSN: 1044-5803.
  Detail | WWW

  ADAM, O.; JAN, V. Influence of milling time on the microstructure of immiscible Cu-Fe-Co-W alloy prepared by powder metallurgy. In Metal 2020. Ostrava: TANGER Ltd., 2020. p. 1092-1097. ISBN: 978-80-87294-97-0.
  Detail | WWW

• 2019

  MORAVČÍKOVA DE ALMEIDA GOUVÊA, L.; KOVACOVA, Z.; JAN, V.; SPOTZ, Z.; KITZMANTEL, M.; NEUBAUER, E.; DLOUHÝ, I. Effect of sintering temperature on the microstructure and properties of powder metallurgy Hf0.5Nb0.5Ta0.5Ti1.5Zr refractory high-entropy alloy. In Metal 2019. 1st edition, 2019. Brno: Tanger Ltd., 2019. p. 1486-1491. ISBN: 978-80-87294-92-5.
  Detail

• 2018

  ŘEHOŘEK, L.; DLOUHÝ, I.; JAN, V. Cold gas dynamic spray deposition as additive manufacturing of architectured materials. Materiálové inžinierstvo, 2018, vol. 24, no. 4, p. 115-123. ISSN: 1335-0803.
  Detail | WWW

  KRAJŇÁKOVÁ, P.; DE ALMEIDA GOUVÊA, L.; ČUPERA, J.; JAN, V.; DLOUHÝ, I.; SPOTZ, Z. Influence of multiple electron-beam remeltings on the characteristics of HVOF and CGDS sprayed conicraly coatings. Materiali in tehnologije, 2018, vol. 52, no. 3, p. 289-293. ISSN: 1580-2949.
  Detail

  DE ALMEIDA GOUVÊA, L.; JAN, V.; DLOUHÝ, I. Preparation and Characterization of CoCrNi-Mo Metal Matrix Composite by Powder Metallurgy. In METAL 2018. 1st Edition, 2018. Brno: Tanger Ltd., 2018. p. 1545-1550. ISBN: 978-80-87294-84-0.
  Detail

  DE ALMEIDA GOUVÊA, L.; MORAVČÍK, I.; ČÍŽEK, J.; KRAJŇÁKOVÁ, P.; JAN, V.; DLOUHÝ, I. Characterization of Powder Metallurgy High-Entropy Alloys Prepared by Spark Plasma Sintering. Materials Science Forum, 2018, vol. 941, no. 1, p. 1053-1058. ISSN: 0255-5476.
  Detail | WWW

  HANUSOVÁ, P.; DLOUHÝ, I.; JAN, V. MECHANO-CHEMICALLY PREPARED AND SPARK PLASMA SINTERED ALUMINIUM MATRIX COMPOSITE WITH CERAMIC AND INTERMETALLIC REINFORCEMENT. Materials Engineering - Materiálové inžinierstvo (online version), 2018, vol. 24, no. 4, p. 131-141. ISSN: 1338-6174.
  Detail | WWW

  ČUPERA, J.; JAN, V. UTILIZATION OF ELECTRON CHANNELLING CONTRAST IMAGING TO DISPLAY CRYSTAL LATTICE ORIENTATION IN SCANNING ELECTRON MICROSCOPY. Sydney: IMC19, 2018.
  Detail

• 2017

  DE ALMEIDA GOUVÊA, L.; ČÍŽEK, J.; ČUPERA, J.; JAN, V.; DLOUHÝ, I. MICROSTRUCTURE AND PROPERTIES OF MULTI-ELEMENTARY POWDERS OBTAINED BY COLD SPRAY DEPOSITION. In METAL 2017. 1st edition, 2018. Brno: Tanger Ltd., 2017. p. 1275-1280. ISBN: 978-80-87294-79-6.
  Detail

  KRAJŇÁKOVÁ, P.; ČUPERA, J.; JAN, V.; DLOUHÝ, I. STUDY OF THE ELECTRON BEAM REMELTING OF A CGDS DEPOSITED CONICRALY LAYERS. In METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS. KELTICKOVA 62, SLEZSKA, OSTRAVA 710 00, CZECH REPUBLIC: TANGER LTD, 2017. p. 1333-1337. ISBN: 978-80-87294-79-6.
  Detail

  JAN, V.; ČUPERA, J.; ŠOHAJ, P.; HAVLÍK, P. Microstructure Evaluation of Heterogeneous Electron Beam Weld between Stabilised Austenitic and ODS Ferritic Steel. Materials Science Forum, 2017, vol. 891, no. 1, p. 185-189. ISSN: 0255-5476.
  Detail | WWW

  JAN, V.; ČUPERA, J.; HAVLÍK, P. ELECTRON BEAM WELDING OF TUNGSTEN AND ODS ALLOYS. In METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS. KELTICKOVA 62, SLEZSKA, OSTRAVA 710 00, CZECH REPUBLIC: TANGER LTD, 2017. p. 1746-1750. ISBN: 978-80-87294-79-6.
  Detail

• 2016

  JAN, V.; MATĚJKOVÁ, M.; DLOUHÝ, I. USE OF COLD GAS DYNAMIC SPRAYING OF BI- METALLIC POWDER MIXTURES AS ALTERNATIVE TO CLASSIC POWDER METALLURGY ROUTE FOR PRODUCING INTERMETALLIC MATERIALS. Materiálové inžinierstvo, 2016, vol. 2016, no. 23, p. 1-10. ISSN: 1335-0803.
  Detail | WWW

• 2015

  JAN, V.; ČUPERA, J.; ČÍŽEK, J. On the search for producing intermetallics by diffusion reaction of cold spray bulk deposits. Surface and Coatings Technology, 2015, vol. 2015, no. 264, p. 216-223. ISSN: 0257-8972.
  Detail | WWW

  HANUSOVÁ, P.; PÁLENÍKOVÁ, L.; ČUPERA, J.; JAN, V.; DLOUHÝ, I. EFFECT OF HEAT TREATMENT ON MICROSTRUCTURE AND PHASES MODIFICATIONS OF BI – METALLIC MATERIALS. In Advances in Powder Metallurgy & Particulate Materials— 2015. Princeton, New Jersey: Metal Powder Industries Federation, 2015. p. 53-61. ISBN: 978-1-943694-01- 3.
  Detail

  JAN, V.; ČÍŽEK, J.; DYČKA, M.; ČUPERA, J. HYPO- EUTECTOID NITI ALLOY MANUFACTURED BY CGDS POWDER MIX DEPOSITION AND HEAT TREATEMENT. Limoges: University of Limoges, 2015.
  Detail | WWW

  DYČKA, M.; JAN, V.; ČUPERA, J.; ČÍŽEK, J. HEAT TREATMENT OF HYPO- EUTECTOID NITI ALLOY MANUFACTURED BY CGDS, POWDER MIX DEPOSITION. In Metal 2015. Ostrava: Tanger, 2015. p. 147-154. ISBN: 978-80-87294-58- 1.
  Detail

  JAN, V.; ČUPERA, J.; ČÍŽEK, J.; JANKOVÝCH, R. Coatings Assesment Report. Brno: 2015. p. 1-35.
  Detail

  ČUPERA, J.; JAN, V. Multimodal Analysis of Phases Formed by Reaction Diffusion in Binary Fe- Al System. Gottingen: 2015. p. 173-175.
  Detail

  PÁLENÍKOVÁ, L.; JAN, V.; ČUPERA, J.; ČÍŽEK, J. PHASE AND THERMAL ANALYSIS OF MICROSTRUCTURE EVOLUTION OF BI – METALLIC MATERIALS DURING HEAT TREATEMENT. In Metal 2015. 2015. p. 157-166. ISBN: 978-80-87294-58-1.
  Detail

• 2014

  JAN, V.; PÁLENÍKOVÁ, L.; ČUPERA, J.; ČÍŽEK, J. Formation of Intermetallic Phases in Fe- Al Binary Cold Spray Thick Deposit. In International Thermal Spray Conference 2014 Proceedings. Barcelona, Španělsko: DVS Media GmbH, 2014. p. 908-912. ISBN: 978-3-87155-574- 9.
  Detail

  ČUPERA, J.; JAN, V. Identification of phases in titanium alloy and correlation between EBSD, High Voltage, Medium Voltage and Low Voltage BSE imaging. 2014. p. 2940-2940.
  Detail

  JINDROVÁ, E.; JAN, V.; ČUPERA, J. THE INFLUENCE OF SUBSTRATE PREPARATION, ANODIZATION CONDITIONS AND POST, ANODIZING TREATMENT ON AAO MICROSTRUCTURE. In Metal 2014. 2014. p. 953-957. ISBN: 978-80-87294-52- 9.
  Detail

  PÁLENÍKOVÁ, L.; JAN, V.; ČUPERA, J.; ČÍŽEK, J. MICROSTRUCTURE OF Fe- Al BINARY COLD SPRAY THICK DEPOSIT AFTER ANNEALING. In Metal 2014. 2014. p. 1328-1333. ISBN: 978-80-87294-52- 9.
  Detail

• 2013

  ŠOHAJ, P.; JAN, V. Local changes of microhardness in dissimilar weld joints after high temperature exposure. Key Engineering Materials (print), 2013, vol. 586, no. -, p. 249-252. ISSN: 1013- 9826.
  Detail

  JAN, V.; ČÍŽEK, J. Cold Gas Dynamic Spraying of Bi- metallic Powders for Intermetallic Phases Formation. 6RIPT. 1. Limoges, Francie: 2013. p. 1-13. ISBN: 1.
  Detail

• 2012

  JAN, V.; ČÍŽEK, J. Cold Gas Dynamic Spraying of Bimetallic Powder Mixtures for Intermetallics Formation. In New Methods of Damage and Failure Analysis of Structural Parts 10-14. 9. 2012 Ostrava. VŠB Ostrava, 2012. p. 153-158. ISBN: 978-80-248-2802- 2.
  Detail

• 2011

  HODIS, Z.; ČELKO, L.; JAN, V. Měření mikrotvrdosti v heterogenních svarových spojích. In Modernizace vysokoškolské výuky technických předmětů. Hradec Králové: Gaudeamus, Univerzita Hradec Králové, 2011. p. 36-39. ISBN: 978-80-7435-110- 5.
  Detail

  JAN, V.; IINO, Y. EVOLUTION OF OXIDE LAYERS ON METALLIC HIGH TEMPERATURE RESISTANT MATERIALS DURING ANNEALING IN HYDROGEN ATMOSPHERE. In Metall 2011 Conference proceedings. 1. Brno: Tanger, 2011. p. 116-122. ISBN: 978-80-87294-22- 2.
  Detail

• 2010

  ŠOHAJ, P.; JAN, V.; DVOŘÁČEK, O. EVALUATION OF MICROSTRUCTURAL STABILITY OF CREEP- RESISTANT STEELS WELD JOINTS ON THE BASIS OF A COMPUTATIONAL MODELING. In METAL 2010: 19TH INTERNATIONAL METALLURGICAL AND MATERIALS CONFERENCE. 2010. Ostrava: TANGER LTD, 2010. p. 403-408. ISBN: 978-80-87294-17- 8.
  Detail

• 2009

  HODIS, Z.; FORET, R.; JAN, V. STRUKTURNÍ HETEROGENITA SVAROVÝCH SPOJŮ. Zvyšování životnoti komponent energetických zařízení v elektrárnách. Plzeň: ZČU Plzeň, 2009. p. 139-144. ISBN: 978-1-60595-005- 1.
  Detail

  JAN, V.; IINO, Y. Changes in ODS superalloy materials induced by high temperature oxposition in different environments. Yucomat 2009. 1. Herceg Novi: Institute of Technical Sciencies of the Serbian Academy of Sciences and Arts, 2009. p. 40-40. ISBN: 978-86-80321-18- 9.
  Detail

  JAN, V.; HODIS, Z.; SOPOUŠEK, J.; FORET, R. Real- life heterogeneous weld joint analysis of heat resistant steels using experimental and computational approach. Yucomat 2009. 1. Herceg Novi: Institute of Technical Sciencies of the Serbian Academy of Sciences and Arts, 2009. p. 139-139. ISBN: 978-86-80321-18- 9.
  Detail

  JAN, V. ANALÝZA A SIMULACE CHOVÁNÍ MATERIÁLŮ PRO VYSOKÉ TEPLOTY. Brno: 2009. p. 0-128.
  Detail

  HODIS, Z.; JAN, V.; SOPOUŠEK, J.; FORET, R. Analysis of realistic heterogeneous welds of heat resistant steels by means of experimental and computational techniques. ČR: 2009. p. 147-147.
  Detail

• 2008

  DORČÁKOVÁ, F.; JAN, V.; HEGEDUSOVÁ, L.; DUSZA, J. Impression Creep in TBC and Advanced Ceramics Material. Key Engineering Materials, 2008, vol. 333, no. 333, p. 281-284. ISSN: 1013- 9826.
  Detail

  JAN, V.; IINO, I. Changes of microstructure, chemical and mechanical properties in ODS materials induced by high temperature air, vacuum and hydrogen exposure. Sixth International Conference on Inorganic Materials. Dresden: 2008. p. 49 ( p.)
  Detail

  JAN, V.; ZLÁMAL, B. Study of heterogeneous welds of heat resistant steels with artificially increased nitrogen content by combination of experimental and computational techniques. TOFA 2008 Distussion Meeting on Thermidynamics of Alloys. 2008. p. 94 ( p.)
  Detail

  JAN, V.; ZLÁMAL, B. Experimentální a výpočetní studie heterogenního svarového spoje žárupevných ocelí s uměle zvýšeným obsahem dusíku. In Metal 2008, 17. mezinárodní konference metalurgie a materiálů. Ostrava: Tanger spol. s r.o., Ostrava, 2008. p. 104-108. ISBN: 978-80-254-1987- 8.
  Detail

  JAN, V.; IINO, I. Changes of Mechanical and Microstructural properties of Hastelloy X Induced by High Temperature Hydrogen, Air and Vacuum Exposure. In New methods of damage and failure analysis of structural parts. Ostrava: Vydavatelství VŠB- TU Ostrava, 2008. p. 25-30. ISBN: 978-80-248-1813- 9.
  Detail

  JAN, V.; ZLÁMAL, B. Study of heretogeneous welds of heat resistant steels with artificially increased nitrogen content by combination of rxperimental and computational techniques. ARCHIVES OF METALLURGY AND MATERIALS, 2008, vol. 53, no. 4, p. 1163-1170. ISSN: 1733- 3490.
  Detail

• 2007

  JAN, V.; DORČÁKOVÁ, F.; DUSZA, J.; BARTSCH, M. Indentation Creep of Free-Standing EB- PVD Thermall Barrier Coatings. Journal of the European Ceramic Society, 2007, vol. 28, no. 1, p. 241-246. ISSN: 0955- 2219.
  Detail

  JAN, V.; IINO, I. Changes of Mechanical and Microstructural Properties of Selected Superalloys Induced by High Temperature Air and Vacuum Exposure. Proceedings of EUROMAT 2007. Muenchen: DGM, 2007.
  Detail

• 2005

  JAN, V.; DORČÁKOVÁ, F.; DUSZA, J.; BARTSCH, M. Indentation Creep Tests on Free- Standing TBC Samples. In SR: TU Košice, 2005. p. 341-346.
  Detail

  FORET, R.; JAN, V.; ZLÁMAL, B.; SOPOUŠEK, J.; SVOBODA, M. Simulace strukturní stability svarových spojů žárupevných ocelí. In METAL 2005. 14. Ostrava: TANGER s.r.o., 2005. p. 53 ( p.)ISBN: 80-86840-13- 1.
  Detail

  ZLÁMAL, B.; FORET, R.; JAN, V.; SOPOUŠEK, J.; BURŠÍK, J. Simulation of Interstitials Redistribution in Dissimilar Welds of Heat- resistant Steels with Increased Nitrogen Content. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2005, vol. 86, no. 308, p. 311-316. ISSN: 1429- 6055.
  Detail

• 2004

  KUČERA, J.; STRÁNSKÝ, K.; JAN, V. The Dependence of Carbon Diffusion Coefficients in Austenitic Ternary allos on Additive Elements. Acta Metallurgica Slovaca, 2004, vol. 10, no. 1, p. 695-697. ISSN: 1335- 1532.
  Detail

  JAN, V., SOPOUŠEK, J., FORET, R. Simulation of dissimilar weld joints of steel P91. Science and Technology of Welding and Joinig, 2004, vol. 9, no. 1, p. 59 ( p.)ISSN: 1362- 1718.
  Detail

  JAN, V., SOPOUŠEK, J. Weld Joint Simulations of Heat- Resistant Steels. Archives of Metallurgy and Materials, 2004, vol. 49, no. 3, p. 469 ( p.)ISSN: 1733- 349.
  Detail

  ZLÁMAL, B.; JAN, V. Simulation of Phase Profiles of Heterogeneous Heat- resistant Steel. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2004, vol. 78, no. 298, p. 207-212. ISSN: 1429- 6065.
  Detail

  ZLÁMAL, B.; JAN, V. Computer Simulation of Heat- Resistant Steels Welds. In JUNIOR EUROMAT 2004. 2004. Lausanne, Switzerland: DGM, 2004. p. 16 ( p.)
  Detail

• 2002

  JAN, V.; SOPOUŠEK, J. Simulation of Carbide/Nitride Precipitation in 3%Cr 1%Mo / P91 Steel Weldment atr Temperature Range 700- 575C. Discussion Meeting on Thermodynamics of Alloys, TOFA 2002. Roma: 2002. p. 55-55.
  Detail

  JAN, V., SOPOUŠEK, J., FORET, R. Predikce fázového složení žárupevných ocelí. In Metal 2002, 11. mezinárodní konference metalurgie a materiálů. Ostrava: Tanger spol. s r.o., Ostrava, 2002. p. 52 ( p.)ISBN: 80-85988-73- 9.
  Detail

• 2001

  JAN, V.; SOPOUŠEK, J.; VŘEŠŤÁL, J. Prediction of phase diagram cross-section of the Fe-Cr-Ni-Mo-Mn- N based system. In TRANSCOM 2001. Žilina, SR: 2001. p. 133 ( p.)ISBN: 80-7100-850- 8.
  Detail

  USTOHAL, V., JAN, V., PTÁČKOVÁ, M. The band- like structure in iron articles from archaeological finds. Acta Metallurgica Slovaca, 2001, vol. 7, no. 2, p. 209 ( p.)ISSN: 1335- 1532.
  Detail

  JAN, V., FORET, R., VŘEŠŤÁL, J., SOPOUŠEK, J. Prediction of phase transformations in heat- resistant steels. In JUNIORMAT 01. VUT, Brno: 2001. p. 172 ( p.)ISBN: 80-214-1885- 0.
  Detail

• 2000

  JAN, V. , KLÍMA,M. Analýza plazmochemického ošetření stříbrných mincí. In Brno: VUT, 2000. p. 103-106.
  Detail

  JAN, V. Plasmochemic Treating of Corroded Surfaces of Archeological Excavations. In Lausanne: DGM, 2000. p. 416-417.
  Detail

• 1999

  USTOHAL, V.; JAN, V. ;DRECHSLER, A. materiálová analýza keltských nástrojů. In Praha: NTM Praha, 1999. p. 13-18.
  Detail

*) Publications are generated once a 24 hours.