- Pravděpodobně máte vypnutý JavaScript. Některé funkce portálu nebudou funkční.
prof. Ing. Jiří Burša, Ph.D.
| bursa@fme.vutbr.cz | |
| Personal BUT number | 1594 |
| Send BUT message | |
*) Publications are generated once a 24 hours.
| 2012 | |
|---|---|
| BURŠA, J.; HOLATA, J.; LEBIŠ, R. Tensegrity finite element models of mechanical tests of individual cells. Technology and Health Care, Int. Journal of Health Care Engineering, 2012, vol. 20, no. 2, Detail | |
| JANÍČEK, P.; BURŠA, J. Characteristics of Science and Scientific Activities: Considerations about What Is and What Is Not Scientific. Journal of Mechanics Engineering and Automation, 2012, vol. 2, no. 9, Detail | |
| LASOTA, T.; BURŠA, J.; FEDOROVA, S. Constitutive equations and finite element formulation for anisotropic hyperelastic composites based on constrained Cosserat continuum. In ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e- Book Full Papers. Vienna: Elsevier, 2012. Detail | |
| FEDOROVA, S.; LASOTA, T.; BURŠA, J.; SKÁCEL, P. Experimental verification of a constitutive model of fibre composite with hyperelastic matrix. In EAN Proceedings 50th annual conference on experimental stress analysis. Tábor: CTU Prague, 2012. Detail | |
| POLZER, S.; BURŠA, J. Simulation of residual stresses (strains) in arteries. In IFMBE Proceedings, Volume 37. Budapest: Springer, 2012. Detail | |
| POLZER, S.; GASSER, T.; MARKERT, B.; BURŠA, J.; SKÁCEL, P. Impact of poroelasticity of intraluminal thrombus on wall stress of abdominal aortic aneurysms. BIOMED ENG ONLINE, 2012, vol. 11, no. 62, Detail | |
| 2011 | |
| SKÁCEL, P.; BURŠA, J. Material parameter identification of arterial wall layers from homogenized stress- strain data. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 2011, vol. 14, no. 01, Detail | |
| POLZER, S.; BURŠA, J.; SWEDENBORG, J.; GASSER, T. The impact of Intra- luminal Thrombus failure on the mechanical stress in the wall of Abdominal Aortic Aneurysms. EUROPEAN JOURNAL OF VASCULAR AND ENDOVASCULAR SURGERY, 2011, vol. 41, no. 4, Detail | |
| ČECH, V.; JANEČEK, P.; LASOTA, T.; BURŠA, J. A fiber-bundle pull-out test for surface-modified glass fibers in GF/ polyester composite. COMPOSITE INTERFACES, 2011, vol. 18, no. 4, Detail | |
| LASOTA, T.; BURŠA, J. Simulation of mechanical tests of composite material using anisotropic hyperelastic constitutive models. Engineering Mechanics, 2011, vol. 18, no. 1, Detail | |
| JANÍČEK, P.; BURŠA, J. Characteristics of science and scientific activities; Considerations about what is and what is not scientific. In Engineering Mechanics 2011; Book of full texts. 1. Prague: Institute of Thermomechanics - Academy of Sciences of the Czech Republic - Prague, 2011. Detail | |
| 2010 | |
| LASOTA, T.; SKÁCEL, P.; BURŠA, J. FACTORS INFLUENCING THE ACCURACY OF MEASURED STRESS- STRAIN CURVES FOR ELASTOMERS. In Engineering mechanics 2010. Praha: 2010. Detail | |
| DĚTÁK, M.; BURŠA, J. Velocity of pulse wave propagation in the abdominal aortic aneurysm. In Human Biomechanics 2010. Praha: Czech Society of Biomechanics, 2010. Detail | |
| DĚTÁK, M.; BURŠA, J. Rychlost šíření pulzní vlny v tepnách a její využití pro diagnostiku aneurysmat břišní aorty. In Proceedings of the Conference Engineering mechanics 2010. Svratka, CZ: Institute of Thermomechanics AS CR, 2010. Detail | |
| POLZER, S.; BURŠA, J. poroelastic model of intraluminal thrombus in FEA of aortic aneurysm. In 6th world congress of biomechanics. singapore: springer, 2010. Detail | |
| POLZER, S.; BURŠA, J. MODEL SIMPLIFICATION AND BOUNDARY CONDITIONS OF ABDOMINAL AORTIC ANEURYSM. In Engineering mechanics 2010. 2010. Detail | |
| BÁBÍK, A.; JANEČEK, P.; LASOTA, T.; BURŠA, J.; ČECH, V. Vliv povrchových úprav skleněných vláken na mechanickou odezvu dlouhými vlákny vyztuženého polymerního kompozitu. In Polymerní kompozity 2010. 2010. Detail | |
| POLZER, S.; BURŠA, J. FEA of prestressed abdominal aortic aneurysm. In Human biomechanics 2010. 2010. Detail | |
| BURŠA, J.; LASOTA, T. Potencies of micromechanical approaches in mechanics of biological tissues. In Human Biomechanics 2010. Praha: Czech Society of Biomechanics, 2010. Detail | |
| BURŠA, J.; MUCHA, P.; SKÁCEL, P. Finite element model of abdominal aortic aneurysm. In IFMBE Proceedings. Munich, Germany: Springer, 2010. Detail | |
| DĚTÁK, M.; BURŠA, J.; ZEMÁNEK, M. Influence of geometric simplifications on stresses and strains in aneurysm model. In IFMBE Proceedings. Munich, Germany: Springer, 2010. Detail | |
| 2009 | |
| LASOTA, T.; BURŠA, J. Výpočtové modelování kompozitů s hyperelastickou matricí a ocelovými vlákny. In Mechanika kompozitních materiálů a konstrukcí 2009. ZČU Plzeň. Plzeň: ZČU Plzeň, 2009. Detail | |
| BURŠA, J.; FUIS, V. Finite element simulation of mechanical tests of individual cells. In IFMBE Proceedings. Munich, Germany: Springer, 2009. Detail | |
| BURŠA, J.; JANÍČEK, P. Systemic approach to modelling of constitutive behaviour of various types of matter. Part I - basic and simple constitutive models. Engineering Mechanics, 2009, vol. 16, no. 4, Detail | |
| BURŠA, J.; JANÍČEK, P. Systemic approach to modelling of constitutive behaviour of various types of matter. Part II - combined constitutive models in solid mechanics. Engineering Mechanics, 2009, vol. 16, no. 5, Detail | |
| ZEMÁNEK, M.; BURŠA, J.; DĚTÁK, M. Biaxial tension tests with soft tissues of arterial wall. Engineering Mechanics, 2009, vol. 16, no. 1, Detail | |
| LASOTA, T.; BURŠA, J. Size effect in computational simulations of experiments with composite materials. In 26th Symposium on Advances in Experimental Mechanics. Montanuniversitat Leoben. Leoben, Rakousko: Montanuniversitat Leoben, 2009. Detail | |
| LASOTA, T.; BURŠA, J. Comparison of experiment and simulation of tension and bending tests using anisotropic hyperelastic model. BOOK OF EXTENDED ABSTRACTS. Plzeň 2009: Západočeská univerzita, 2009. Detail | |
| 2008 | |
| BURŠA, J.; SKÁCEL, P.; ZEMÁNEK, M.; KREUTER, D. Implementation of hyperelastic models for soft tissues in FE program and identification of their parameters. In Proceedings of the Sixth IASTED Internation aConference on Biomedical Engineering. Innsbruck: IASTED, 2008. Detail | |
| MUCHA, P.; BURŠA, J.; RYŠAVÝ, P. Stress- strain analysis of abdominal aortic aneurysm. In Human Biomechanics 2008 - Program and Abstracts. Praha: Czech Society of Biomechanics, 2008. Detail | |
| DĚTÁK, M.; BURŠA, J.; ZEMÁNEK, M. Biaxial tensile testing of porcine aortas. In Human Biomechanics 2008 - Program and Abstracts. Praha: Czech Society of Biomechanics, 2008. Detail | |
| LASOTA, T.; BURŠA, J. Využití anizotropních hyperelastických konstitutivních modelů. In Ansys konference 2008. 2008. Detail | |
| 2007 | |
| BURŠA, J.; JANÍČEK, P. Systemization of Constitutive Models and Identification of their Parameters. In Proceedings of Conference on Modelling of Heterogeneous Materials. Praha: ČVUT Praha, 2007. Detail | |
| ZEMÁNEK, M.; BURŠA, J. IDENTIFICATION OF PARAMETERS OF CONSTITUTIVE MODELS FOR SOFT TISSUES FROM BIAXIAL TENSION TESTS. In Engineering Mechanics 2007. SVRATKA: Academy od Sciences of the Czech Republic, v.v.i., Prague, 2007. Detail | |
| ZEMÁNEK, M.; BURŠA, J. IDENTIFICATION OF PARAMETERS OF HYPERELASTIC MODELS FROM BIAXIAL TENSION TESTS. In Experimental Stress Analysis. Plzeň: 2007. Detail | |
| LASOTA, T.; BURŠA, J. Návrh testování elastomerů a MKP výpočet koncovky klimatizačního vedení. In Konference diplomových prací 2007. Brno: VUT, 2007. Detail | |
| BURŠA, J.; ZEMÁNEK, M. Evaluation of Biaxial Tension Tests of Soft Tissues. Technology and Informatics, 2007, vol. 133, no. 1, Detail | |
| BURŠA, J.; LEBIŠ, R.; HOLATA, J. Tensegrity FE models of mechanical tests of individual cells. In Short Communications of the International Conference on Computatitonal Biomechanics and Biology. Plzeň: University of West Bohemia, 2007. Detail | |
| 2006 | |
| IVÁN, L., JANÍČEK, P., JANÍČEK, P., BURŠA, J. Stress analysis in acetabulum aesculap plasmatic sc ceramics- ceramics. In HUMAN BIOMECHANICS 2006. Hrotovice: 2006. Detail | |
| BURŠA, J.; LEBIŠ, R. DOUBLE TENSEGRITY FE MODEL OF CELL USED IN SIMULATION OF ITS INDENTATION TEST. In Human biomechanics 2006. Hrotovice: Brno University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2006. Detail | |
| BURŠA, J.; MUDRÁK, J.; JANÍČEK, P. Stress concentration in inclined bar and beam shoulders. Inženýrská mechanika - Engineering Mechanics, 2006, vol. 2006 (13), no. 5, Detail | |
| BURŠA, J.; LEBIŠ, R. COMPUTATIONAL MODELING OF MECHANICAL BEHAVIOUR OF CELL. In Engineering mechanics 2006. Svratka: Institute of Theoretical and Applied Mechanics, Czech Academy of Sciences, 2006. Detail | |
| BURŠA, J.; LEBIŠ, R. Tensegrity FE models of mechanical tests of individual cells. In Abstracts of 5th World Congress of Biomechanics. Munich, Germany: European Society of Biomechanics, 2006. Detail | |
| BURŠA, J.; KUŽELA, P. Significance of cancellous bone orthotropy and non- homogeneity in femoral head. In Abstracts of the 5th world Congress of Biomechanics. Munich, Germany: European Society of Biomechanics, 2006. Detail | |
| JANÍČEK, P., BURŠA, J., FUIS, V. Analysis of Credibility of Results of Solutions to Biomechanical Clinical Problems. In HUMAN BIOMECHANICS 2006. Hrotovice: 2006. Detail | |
| BURŠA, J.; RYŠAVÝ, P. STRESS STRAIN ANALYSIS OF ABDOMINAL AORTIC ANEURYSM. In Human Biomechanics 2006. Hrotovice: Brno University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2006. Detail | |
| BURŠA, J. TENSEGRITY STRUCTURES AND THEIR APPLICATION IN MODELS OF CYTOSKELETON. In Human Biomechanics 2006. Hrotovice: Brno University of Technology, Institute of Solid mechanics, Mechatronics and Biomechanics, 2006. Detail | |
| BURŠA, J.; IVÁN, L.; JANÍČEK, P. STRESS ANALYSIS IN ACETABULUM AESCULAP PLASMACUP SC CERAMICS- CERAMICS. In Human Biomechanics 2006. Hrotovice: Brno University of technology, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2006. Detail | |
| BURŠA, J.; LEBIŠ, R.; JANÍČEK, P. FE models of stress- strain states in vascular smooth muscle cell. Technology and Health Care, Int. Journal of Health Care Engineering, 2006, vol. 14, no. 4, 5, Detail | |
| BURŠA, J. Human Biomechanics 2006. Hrotovice: ČSB, 2006. Detail | |
| 2005 | |
| HANÁKOVÁ, S., BURŠA, J., Krmela, J. VÝPOČTOVÝ MODEL MECHANICKÉHO CHOVÁNÍ KOMPOZITU S ELASTOMEROVOU MATRICÍ. In Proceedings of the 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: 2005. Detail | |
| SKÁCEL, P.; BURŠA, J. Computational Modelling of Bimaterial Interface Failure in View of Rubber- Steel Interface. Engineering Mechanics, 2005, vol. 12, no. 2, Detail | |
| RYŠAVÝ P., BURŠA J. Stress-Strain Analysis of Abdominal Aortic Aneurysm. In Proceedings of the 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: VUT Brno, 2005. Detail | |
| SKÁCEL, P., Burša, J. Computational Modelling of Spherical Cavity Behavior in Rubber- like Solids. Materials Science Forum, 2005, vol. 482, no. 1, Detail | |
| Lebiš, R., BURŠA, J., Janíček, P. MOŽNOSTI MKP VÝPOČTOVÉ SIMULACE ZKOUŠKY PRŮNIKU U ISOLOVANÝCH BUNĚK. In 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: 2005. Detail | |
| ZEMÁNEK, M., BURŠA, J. ZAŘÍZENÍ PRO DVOJOSÉ TAHOVÉ ZKOUŠKY MĚKKÝCH TKÁNÍ. In 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: 2005. Detail | |
| BURŠA, J., JANÍČEK, P., LEBIŠ, R. COMPUTATIONAL MODELLING OF SMOOTH MUSCLE CELLS. In Engineering Mechanics 2005. Svratka: 2005. Detail | |
| LEBIŠ, R., BURŠA, J. Vliv tuhosti komponent buňky na výsledky simulace zkoušky průniku. In Engineering Mechanics 2005. Svratka: 2005. Detail | |
| RYŠAVÝ, P., BURŠA, J., Suškevič, I., Krupa, P. DEFORMAČNĚ- NAPĚŤOVÁ ANALÝZA ANEURYSMATU BŘIŠNÍ AORTY. In 7th International Scientific Conference Applied Mechanics 2005. Hrotovice: 2005. Detail | |
| Hanáková, S., BURŠA, J., Krmela, J. VÝPOČTOVÝ MODEL MECHANICKÉHO CHOVÁNÍ KOMPOZITU S ELASTOMEROVOU MATRICÍ. In Nečtiny. 2005. Detail | |
| JANÍČEK, P.; SKALKA, P.; BURŠA, J.; PEŠLOVÁ, F. Výpočtové modelování deformační stability plechů odporníků elektrických lokomotiv. In Dynamic of Civil Engineering and Transport Structures and Wind Enginering. Žilina: University of Zilina, 2005. Detail | |
| BURŠA, J., LEBIŠ, R., RYŠAVÝ, P. COMPUTATIONAL MODELLING OF BEHAVIOUR OF SOFT BIOLOGICAL TISSUES. In IFMBE Proceedings. IFMBE Proceedings. Prague: 2005. Detail | |
| 2004 | |
| BURŠA, J.; JANÍČEK, P.; VAJDÁK, M. ACCURACY ESTIMATION OF ELASTICITY MODULI EVALUATED BY FOUR- POINT BENDING. Inženýrská mechanika - Engineering Mechanics, 2004, vol. 11, no. 6, Detail | |
| BURŠA, J., JANÍČEK, P., LEBIŠ, R. Biomechanics of smooth muscle cells. In Biomechanics of Man. Plzeň: Západočeská Univerzita Plzeň, 2004. Detail | |
| 2003 | |
| SKÁCEL, P. Computational Simulation and Accuracy Analysis of Unconventional Experimental Method for Equibiaxial Stress- Strain Dependence Investigation of Elastomers. In Experimental Stress Analysis 2003. Milovy, CZ: Czech Society for Mechanics, 2003. Detail | |
| BURŠA, J., RYŠAVÝ, P., LEBIŠ, R. Stress- Strain Analysis in Anastomoses of Arteries with Vascular Grafts. In World Congress on Medical Physics and Biomedical Engineering. Sydney, Australia: International Federation of Medical and Biological Engineering, 2003. Detail | |
| BURŠA, J., JANÍČEK, P. EVALUATION OF MODULI OF ELASTICITY FOR THIN LAYERS. Inženýrská mechanika - Engineering Mechanics, 2003, vol. 10, no. 2, Detail | |
| BURŠA, J., JANÍČEK, P. SYSTEM APPROACH TO SOLVING PROBLEMS IN BIOMECHANICS OF BLOOD VESSELS. In Mechatronics, Robotics and Biomechanics 2003. Hrotovice, CZ: ÚMTMB, 2003. Detail | |
| 2002 | |
| JANÍČEK, P., PEŠLOVÁ, F., KUBÍČEK, J., BURŠA, J., FUIS, V., KOTEK, V., FILÍPEK, J., BUMBÁLEK, L., VLK, M., ČEPERA, M. Metodologie určování mechanických charakteristik plazmatických nástřiků korundovo- baddeleyitové keramiky EUCOR. In Inženýrská mechanika. Brno: VUT FSI Brno, 2002. Detail | |
| BURŠA, J. POSOUZENÍ MOŽNOSTI URČOVÁNÍ KOHEZNÍ PEVNOSTI ZKOUŠKOU V KRUTU. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Prague, CZ: UTAM AS CR?, 2002. Detail | |
| BURŠA, J. URČOVÁNÍ MODULŮ PRUŽNOSTI TENKÝCH VRSTEV. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Praha, CZ: UTAM?, 2002. Detail | |
| BURŠA, J. URČOVÁNÍ MODULŮ PRUŽNOSTI TENKÝCH VRSTEV. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Praha, CZ: UTAM?, 2002. Detail | |
| VAJDÁK, M., BURŠA, J. EXPERIMENT PLANNING IN EVALUATION OF SOFT TISSUE MECHANICAL CHARACTERISTICS. In Proceedings of the International Conference Biomechanics of Man 2002. Čejkovice, CZ: Charles University in Prague, Faculty of Physical Education and Sport, 2002. Detail | |
| SKÁCEL, P., BURŠA, J. Computational Stress Simulation of Rubber Twist- test via FEM. In Inženýská mechanika 2002 Engineering Mechanics 2002. Svratka: VUT Brno, 2002. Detail | |
| BURŠA, J., KNOBLOCH, T. STRESS- STRAIN ANALYSIS IN A CONNECTION OF ARTERY AND VASCULAR GRAFT. In Proceedings of the International Conference Biomechanics of Man 2002. Čejkovice, CZ: Charles University in Prague, Faculty of Physical Education and Sport, 2002. Detail | |
| VAJDÁK, M., KNOBLOCH, T., BURŠA, J. Modelování napjatosti ve spojích tepen s cévními náhradami. Acta Mechanica Slovaca, 2002, vol. 2002, no. 1, Detail | |
| JANÍČEK, P., BURŠA, J. URČOVÁNÍ MODULŮ PRUŽNOSTI TENKÝCH VRSTEV. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Praha, CZ: UTAM?, 2002. Detail | |
| SKÁCEL, P., BURŠA, J. Analýza vlivu tření na deformaci pryžového vzorku při zkoušce jednoosým tlakem. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Praha, CZ: UTAM?, 2002. Detail | |
| ČERNÝ, V., BURŠA, J. POSOUZENÍ MOŽNOSTI URČOVÁNÍ KOHEZNÍ PEVNOSTI ZKOUŠKOU V KRUTU. In Proceedings of the 40th International Conference Experimental Stress Analysis 2002. Prague, CZ: UTAM AS CR?, 2002. Detail | |
| VAJDÁK, M., BURŠA, J. Simulace nelineárně elastických ortotropních vlastností tepny pomocí izotropních konečných prvků. In Inženýrská mechanika 2002 Engineering Mechanics 2002. Svratka, ČR: Institute of Mechanics of Solids, Faculty of Mechanical Engineering, Brno University of Technology, 2002. Detail | |
| BURŠA, J. Experimental- Computational analysis of Cohesion Tests. In Inženýrská mechanika 2002 Engineering Mechanics 2002. Svratka, ČR: Institute of Mechanics of Solids, Faculty of Mechanical Engineering, Brno University of Technology, 2002. Detail | |
| BURŠA, J. Výpočtové modelování deformačně- napjatostních stavů tepen. Acta Mechanica Slovaca, 2002, vol. 2002, no. 1, Detail | |
| JANÍČEK, P., BURŠA, J. Experimental - computational modelling of adhesion strength in composite materials. In Seventh International Conference Damage and Fracture Mechanics VII. Kihei, USA: Witpress, southampton, boston, 2002. Detail | |
| JANÍČEK, P., BURŠA, J. Experimental - computational modelling of adhesion strength in composite materials. In Seventh International Conference Damage and Fracture Mechanics VII. Kihei, USA: WITPress, Southampton, Boston, 2002. Detail | |
| BURŠA, J. Modelling of stress-strain states in arteries as a pre- requisite for damage prediction. In Seventh International Conference Damage and Fracture Mechanics VII. Kihei, USA: WITPress, Southampton, Boston, 2002. Detail | |
| 2001 | |
| BURŠA, J. Experimental- computational Modelling of Damage of Steel reinforced Rubber Composite. In Theoretical and Experimental Problems of Materials Engineering. Púchov: FIT UT Trenčín, Matador Púchov, 2001. Detail | |
| BURŠA, J. Stress- strain analysis of an overlapped connection of artery and vascular graft. In Inženýrská mechanika 2001- EMGINEERING MECHANICS 2001. Svratka, CZ: IT AS CR Praha, AEM, ISM FME BUT Brno, ITAM AS CR Praha, 2001. Detail | |
| BURŠA, J. Experimental-computational analysis of adhesion and fracture in composite “rubber-steel wire rope”. In Inženýrská mechanika 2001 Engineering Mechanics 2001. Svratka, CZ: IT AS CR Praha, AEM, ISM FSI VUT Brno, ITAM AS CR Praha, 2001. Detail | |
| BURŠA, J. EXPERIMENTAL- COMPUTATIONAL MODELLING OF DAMAGE OF STEEL REINFORCED RUBBER COMPOSITE. In Materials Structure and Micromechanics of Fracture. Brno, CZ: Vutium, Brno University of Technology, 2001. Detail | |
| JANÍČEK, P., FUIS, V., PEŠLOVÁ, F., KOTEK, V., REINISCH, M., BURŠA, J. EXPERIMENTAL AND COMPUTATIONAL INVESTIGATION OF ELASTIC CHARACTERISTICS OF POROUS MATERIALS. In Experimentální Analýza Napětí 2001. Praha: Ústav teoretické a aplikované mechaniky AV ČR, 2001. Detail | |
| BURŠA, J. CONSTITUTIVE CHARACTERISTICS OF RUBBER AT NORMAL, HIGH AND LOW TEMPERATURES. Materiálové inžinierstvo, 2001, vol. 8, no. 4, Detail | |
| BURŠA, J. Mechanical Optimization of Geometry of the System “Artery-Vascular Graft”. In Mechatronics and Robotics. Třešť: IM BUT Brno, MC IT CAS, CC IFToMM, 2001. Detail | |
| BURŠA, J. EXPERIMENTÁLNÍ URČOVÁNÍ ELASTICKÝCH PARAMETRŮ PRYŽÍ PŘI RŮZNÝCH TEPLOTÁCH. In Experimentální analýza napětí 2001. Tábor, CZ: FTC CTU Praha, ITAM AS CR Praha, CSM, 2001. Detail | |
| 2000 | |
| JANÍČEK, P., BURŠA, J., KOTEK, V., REINISCH, M. Experimentální vyšetřování mechanických charakteristik netradičních technických materiálů. In Experimentální Analýza Napětí 2000. Třešť, ČR: Czech Society for Mechanics, Institute of Mechanics of Solids, FME BUT, Mechatronics Center, IT CAS at TU of Brno, Detail | |
| JANÍČEK, P., PŘIKRYL, K., PELLANT, K., BURŠA, J., FUIS, V., PÁSEK, M., FLORIÁN, Z. Biomechanika na Ústavu mechaniky těles FSI VUT v Brně. Inženýrská mechanika - Engineering Mechanics, vol. 7, no. 6, Detail | |
| JANÍČEK, P., FLORIAN, Z., BURŠA, J., PŘIKRYL, K., PELLANT, K., FUIS, V., PÁSEK, M., KRŠEK, P. Biomechanika na Ústavu mechaniky těles FSI VUT v Brně. Inženýrská mechanika - Engineering Mechanics, 2000, vol. 7, no. 6, Detail | |
| BURŠA, J., JANÍČEK, P. Computational modelling of stress and strain states in aorta. In ESB 2000. Dublin, Ireland: Royal Academy of Medicine in Ireland, Detail | |
| BURŠA, J., JANÍČEK, P. Comprehensive approach to computational modelling of properties and behaviour of tyres. In 5th Polish- Slovak Scientific Conference COMPUTER SIMULATION IN MACHINE DESIGN. Wierzba, Poland: Warsaw University of Technology, Poznań University of Technology, Detail | |
| BURŠA, J. COMPUTATIONAL MODELLING OF STRESS AND STRAIN STATES IN ARTERY WALLS USING FEM. In IV Miedzynarodowe Seminarium Mechaniki Stosowanej. Wisla, Polsko: Politechnika Slaska, Wydzial mechaniszny technologiczny, Katedra mechaniki stosowanej, Detail | |
| BURŠA, J., JANÍČEK, P. Vyhodnocení únavových zkoušek vláknových kompozitů vykazujících velké deformace. In Engineering Mechanics 2000. Svratka, Česká republika: Ústav mechaniky těles, FSI, VUT Brno, ÚTAM AV ČR Praha, Ústav termodynamiky AV ČR Praha, Žďas, a.s., Společnost pro inženýrskou mechaniku, Detail | |
| 1997 | |
| BURŠA, J. Výpočtová simulace napjatosti v tepnách. In Mosis 97 - Proceedings. 3. Ostrava 1997: VŠB - Technical University Ostrava, Detail | |
| BURŠA, J., JANÍČEK, P., DEUTSCHER, J. Výpočtové modelování neizotropních vlastností materiálů. Inženýrská mechanika - Engineering Mechanics, vol. 4/ 1997, no. 3, Detail | |
| 1996 | |
| JANÍČEK, P., BURŠA, J. Residual Stress in the nonhomogenity cylinder Bodies. Inženýrská mechanika - Engineering Mechanics, vol. 1996, no. 1, Detail | |
| BURŠA, J., JANÍČEK, P. Zbytková napjatost v nehomogenních válcových nádobách. Inženýrská mechanika - Engineering Mechanics, vol. 3., no. 1, Detail | |
Pokud je v údajích nesrovnalost, podívejte se do častých otázek k vizitkám.
